3.8.4

fix firmware size check
3.8.3
2026-09-13 13:44:10 +00:00 · 2026-08-04 08:13:45 +02:00 · 2026-08-03 09:59:46 +02:00 · 2026-08-02 09:56:04 +02:00 · 2026-08-02 09:55:48 +02:00 · 2026-08-01 17:05:18 +02:00
56 changed files with 1750 additions and 1880 deletions
@@ -5,6 +5,43 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+## [3.8.4] 4 August 2026
+
+## Fixed
+
+- Allow auto-download and install of firmware versions which are smaller to allow update to the latest 3.9.0-development version.
+
+## [3.8.3] 1 August 2026
+
+## Added
+
+- KM300 at address 0x4A [#3084](https://github.com/emsesp/EMS-ESP32/issues/3084)
+
+## Fixed
+
+- signed value for solarInfuence [#3077](https://github.com/emsesp/EMS-ESP32/issues/3077)
+- set bin file upload limit to 1M again [#3086](https://github.com/emsesp/EMS-ESP32/issues/3086)
+- check arithmetric operations on strings [#3127](https://github.com/emsesp/EMS-ESP32/discussions/3127)
+- prevent system crash during WiFi network discovery on ESP32-S3 hardware [#3128](https://github.com/emsesp/EMS-ESP32/pull/3128)
+- fix setting date/time on Junkers thermostats
+- offset of hpminflowtemp [#3144](https://github.com/emsesp/EMS-ESP32/issues/3144)
+- water circulation command [#3149](https://github.com/emsesp/EMS-ESP32/pull/3149)
+- start scheduler after customEntities, delay scheduler loop after startup, handling of `system/restart` command [#3146](https://github.com/emsesp/EMS-ESP32/issues/3146)
+- possible memory leaks fixed.
+- repeated startup schedules compute value
+- call `system/message` called from scheduler processes compute twice
+- water module SM100/200 as dhw1/dhw2 [#3164](https://github.com/emsesp/EMS-ESP32/issues/3164)
+
+## Changed
+
+- call compute value direct, enlarge TCP stack [#3127](https://github.com/emsesp/EMS-ESP32/discussions/3127)
+- Dewtemperature for Easycontrol calculated by ems-esp [#3135](https://github.com/emsesp/EMS-ESP32/issues/3135)
+- add option for sync thermostat to ntp, allow different time zones [#3148](https://github.com/emsesp/EMS-ESP32/discussions/3148), **defaults to sync**.
+- block too many GET requests [mentioned in #3104](https://github.com/emsesp/EMS-ESP32/issues/3104)
+- set 10 sec timeout for http requests [#3104](https://github.com/emsesp/EMS-ESP32/issues/3104)
+- language code "cs" [#3161](https://github.com/emsesp/EMS-ESP32/issues/3161)
+
+
 ## [3.8.2] 12 May 2026

 ## Added
@@ -71,7 +108,6 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - board profile `CUSTOM` can only be selected in developer mode
 - mqtt sends round values without decimals (`28` instead of `28.0`)

-
 ## [3.8.0] 31 December 2025

 ## Added
@@ -1,13 +1,3 @@
 # Changelog

 For more details go to [emsesp.org](https://emsesp.org/).
-
-## [3.8.3]
-
-## Added
-
-## Fixed
-
- signed value for solarInfuence [#3077](https://github.com/emsesp/EMS-ESP32/issues/3077)
-
-## Changed
@@ -5363,16 +5363,16 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
@@ -5972,16 +5972,16 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
@@ -6124,16 +6124,16 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
@@ -6291,16 +6291,16 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
@@ -6410,6 +6410,21 @@ int8
 int8
 | pvlowercool | lower cooling with PV | int8 (&gt;=-5&lt;=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
 | absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
+| hpoperatingmode | heatpump operating mode | enum |   | true | DEVICE_DATA | 89 | 1 | 1 |
+uint8
+| summertemp | summer temperature | uint8 (&gt;=10&lt;=30) | C | true | DEVICE_DATA | 90 | 1 | 1 |
+uint8
+| instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | DEVICE_DATA | 91 | 1 | 1 |
+uint8
+| coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | DEVICE_DATA | 92 | 1 | 1 |
+uint8
+| heatondelay | heat-on delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 93 | 1 | 1/4 |
+uint8
+| heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 94 | 1 | 1/4 |
+uint8
+| coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 95 | 1 | 1/4 |
+uint8
+| cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 96 | 1 | 1/4 |
 int16
 | hc1.seltemp | selected room temperature | int16 (&gt;=0&lt;=30) | C | true | HC | 0 | 1 | 1/2 |
 | hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
@@ -6480,21 +6495,9 @@ uint8
 | hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.heatondelay | heat-on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
@@ -8143,7 +8146,7 @@ uint8
 | datetime | date/time | string |   | false | DEVICE_DATA | 0 | 13 | 1 |
 | outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
 | src1.currtemp | current room temperature | int16 | C | false | SRC | 0 | 1 | 1/10 |
-| src1.airhumidity | relative air humidity | int8 | % | false | SRC | 1 | 1 | 1 |
+| src1.airhumidity | relative air humidity | uint8 | % | false | SRC | 1 | 1 | 1 |
 | src1.dewtemperature | dew point temperature | int16 | C | false | SRC | 2 | 1 | 1/10 |
 uint8
 | src1.seltemp | selected room temperature | uint8 (&gt;=5&lt;=30) | C | true | SRC | 3 | 1 | 1/2 |
@@ -8353,70 +8356,40 @@ uint8
 | shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
 |-|-|-|-|-|-|-|-|-|
 | dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 16 | 1 | 1/10 |
-| dhw.coldtemp | cold water | uint16 | C | false | DHW | 17 | 1 | 1/10 |
-| dhw.temp5 | temperature 5 | uint16 | C | false | DHW | 18 | 1 | 1/10 |
-| dhw.rettemp | return temperature | uint16 | C | false | DHW | 19 | 1 | 1/10 |
+| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
 | dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
 uint8
 | dhw.maxtemp | maximum temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 12 | 1 | 1 |
+int8
+| dhw.difftemp | start differential temperature | int8 (&gt;=0&lt;=0) | C | true | DHW | 13 | 1 | 1 |
 uint8
-| dhw.seltemp | selected temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 0 | 1 | 1 |
+| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
 uint8
 | dhw.redtemp | reduced temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 14 | 1 | 1 |
 uint8
-| dhw.hottemp | extra hot temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.dailytemp | daily temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
+| dhw.requiredtemp | required temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 15 | 1 | 1 |
 | dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
 | dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-| dhw.circtc | circulation time controlled | boolean |   | true | DHW | 22 | 1 | 1 |
-| dhw.keepwarm | keep warm | boolean |   | true | DHW | 23 | 1 | 1 |
-| dhw.status2 | status 2 | enum |   | false | DHW | 24 | 1 | 1 |
-| dhw.pumpmod | pump modulation | uint8 | % | false | DHW | 25 | 1 | 1 |
-| dhw.flow | flow rate | uint16 | l/min | false | DHW | 26 | 1 | 1/10 |
-uint8
-| dhw.valvereturn | return valve | uint8 (&gt;=0&lt;=0) | % | true | DHW | 27 | 1 | 1 |
-uint8
-| dhw.deltatret | temp. diff. return valve | uint8 (&gt;=0&lt;=0) | K | true | DHW | 28 | 1 | 1 |
-| dhw.errordisp | error display | enum |   | true | DHW | 29 | 1 | 1 |

 ### SM200, MS200

 | shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
 |-|-|-|-|-|-|-|-|-|
 | dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 16 | 1 | 1/10 |
-| dhw.coldtemp | cold water | uint16 | C | false | DHW | 17 | 1 | 1/10 |
-| dhw.temp5 | temperature 5 | uint16 | C | false | DHW | 18 | 1 | 1/10 |
-| dhw.rettemp | return temperature | uint16 | C | false | DHW | 19 | 1 | 1/10 |
+| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
 | dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
 uint8
 | dhw.maxtemp | maximum temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 12 | 1 | 1 |
+int8
+| dhw.difftemp | start differential temperature | int8 (&gt;=0&lt;=0) | C | true | DHW | 13 | 1 | 1 |
 uint8
-| dhw.seltemp | selected temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 0 | 1 | 1 |
+| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
 uint8
 | dhw.redtemp | reduced temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 14 | 1 | 1 |
 uint8
-| dhw.hottemp | extra hot temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.dailytemp | daily temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
+| dhw.requiredtemp | required temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 15 | 1 | 1 |
 | dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
 | dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-| dhw.circtc | circulation time controlled | boolean |   | true | DHW | 22 | 1 | 1 |
-| dhw.keepwarm | keep warm | boolean |   | true | DHW | 23 | 1 | 1 |
-| dhw.status2 | status 2 | enum |   | false | DHW | 24 | 1 | 1 |
-| dhw.pumpmod | pump modulation | uint8 | % | false | DHW | 25 | 1 | 1 |
-| dhw.flow | flow rate | uint16 | l/min | false | DHW | 26 | 1 | 1/10 |
-uint8
-| dhw.valvereturn | return valve | uint8 (&gt;=0&lt;=0) | % | true | DHW | 27 | 1 | 1 |
-uint8
-| dhw.deltatret | temp. diff. return valve | uint8 (&gt;=0&lt;=0) | K | true | DHW | 28 | 1 | 1 |
-| dhw.errordisp | error display | enum |   | true | DHW | 29 | 1 | 1 |

 ## Devices of type \_pool

@@ -4044,17 +4044,17 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "UI800, BC400",thermostat,4,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,6,1,1,41,1
 "UI800, BC400",thermostat,4,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,6,1,1,42,1
 "UI800, BC400",thermostat,4,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,6,1,1,43,1
-"UI800, BC400",thermostat,4,hc1.control,control device,enum [off\|-\|RC100\|RC100H\|-\|RC120RF\|RC220/RT800\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
+"UI800, BC400",thermostat,4,hc1.control,control device,enum [off\|-\|RC100\|RC100H\|-\|RC120RF\|RC220\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
 "UI800, BC400",thermostat,4,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,6,1,1/10,45,1
 "UI800, BC400",thermostat,4,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
 "UI800, BC400",thermostat,4,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "UI800, BC400",thermostat,4,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"UI800, BC400",thermostat,4,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"UI800, BC400",thermostat,4,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"UI800, BC400",thermostat,4,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"UI800, BC400",thermostat,4,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"UI800, BC400",thermostat,4,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"UI800, BC400",thermostat,4,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "UI800, BC400",thermostat,4,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"UI800, BC400",thermostat,4,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"UI800, BC400",thermostat,4,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"UI800, BC400",thermostat,4,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"UI800, BC400",thermostat,4,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "UI800, BC400",thermostat,4,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "UI800, BC400",thermostat,4,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
 "UI800, BC400",thermostat,4,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
@@ -4439,12 +4439,12 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.control,control device,enum [RC310\|RC200\|RC100\|RC100H\|TC100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
@@ -4537,12 +4537,12 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
@@ -4644,12 +4644,12 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 2000/3000",thermostat,172,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
 "Rego 2000/3000",thermostat,172,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "Rego 2000/3000",thermostat,172,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"Rego 2000/3000",thermostat,172,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"Rego 2000/3000",thermostat,172,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"Rego 2000/3000",thermostat,172,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"Rego 2000/3000",thermostat,172,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"Rego 2000/3000",thermostat,172,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"Rego 2000/3000",thermostat,172,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "Rego 2000/3000",thermostat,172,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"Rego 2000/3000",thermostat,172,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"Rego 2000/3000",thermostat,172,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"Rego 2000/3000",thermostat,172,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"Rego 2000/3000",thermostat,172,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "Rego 2000/3000",thermostat,172,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "Rego 2000/3000",thermostat,172,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
 "Rego 2000/3000",thermostat,172,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
@@ -4720,6 +4720,14 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,pvraiseheat,raise heating with PV,int8 (>=0<=5),K,true,number.thermostat_raise_heating_with_PV,number.thermostat_pvraiseheat,6,0,1,62,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,pvlowercool,lower cooling with PV,int8 (>=-5<=0),K,true,number.thermostat_lower_cooling_with_PV,number.thermostat_pvlowercool,6,0,1,63,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,absent,absent,boolean (>=0<=0), ,true,switch.thermostat_absent,switch.thermostat_absent,6,0,1,64,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hpoperatingmode,heatpump operating mode,enum [off\|auto\|heating\|cooling] (>=0<=0), ,true,select.thermostat_heatpump_operating_mode,select.thermostat_hpoperatingmode,6,0,1,89,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,summertemp,summer temperature,uint8 (>=10<=30),C,true,number.thermostat_summer_temperature,number.thermostat_summertemp,6,0,1,90,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_instant_start,number.thermostat_instantstart,6,0,1,91,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_cooling_starttemp,number.thermostat_coolstart,6,0,1,92,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_heat-on_delay,number.thermostat_heatondelay,6,0,1/4,93,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_heat-off_delay,number.thermostat_heatoffdelay,6,0,1/4,94,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_cooling_on_delay,number.thermostat_coolondelay,6,0,1/4,95,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_cooling_off_delay,number.thermostat_cooloffdelay,6,0,1/4,96,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.seltemp,selected room temperature,int16 (>=0<=30),C,true,number.thermostat_hc1_selected_room_temperature,number.thermostat_hc1_seltemp,6,1,1/2,0,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.currtemp,current room temperature,int16,C,false,sensor.thermostat_hc1_current_room_temperature,sensor.thermostat_hc1_currtemp,6,1,1/10,1,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.haclimate,mqtt discovery current room temperature,enum [selTemp\|roomTemp], ,false,sensor.thermostat_hc1_mqtt_discovery_current_room_temperature,sensor.thermostat_hc1_haclimate,6,1,1,2,1
@@ -4764,17 +4772,11 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,6,1,1,41,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,6,1,1,42,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,6,1,1,43,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.control,control device,enum [off\|-\|RC100\|RC100H\|-\|RC120RF\|RC220/RT800\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.control,control device,enum [off\|-\|CR10\|CR10H\|-\|CR20RF\|RT800\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,6,1,1/10,45,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
@@ -5859,7 +5861,7 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "MX400",connect,17,datetime,date/time,string, ,false,sensor.connect_date/time,sensor.connect_datetime,13,0,1,0,13
 "MX400",connect,17,outdoortemp,outside temperature,int16,C,false,sensor.connect_outside_temperature,sensor.connect_outdoortemp,13,0,1/10,13,1
 "MX400",connect,17,src1.currtemp,current room temperature,int16,C,false,sensor.connect_src1_current_room_temperature,sensor.connect_src1_currtemp,13,36,1/10,0,1
-"MX400",connect,17,src1.airhumidity,relative air humidity,int8,%,false,sensor.connect_src1_relative_air_humidity,sensor.connect_src1_airhumidity,13,36,1,1,1
+"MX400",connect,17,src1.airhumidity,relative air humidity,uint8,%,false,sensor.connect_src1_relative_air_humidity,sensor.connect_src1_airhumidity,13,36,1,1,1
 "MX400",connect,17,src1.dewtemperature,dew point temperature,int16,C,false,sensor.connect_src1_dew_point_temperature,sensor.connect_src1_dewtemperature,13,36,1/10,2,1
 "MX400",connect,17,src1.seltemp,selected room temperature,uint8 (>=5<=30),C,true,number.connect_src1_selected_room_temperature,number.connect_src1_seltemp,13,36,1/2,3,1
 "MX400",connect,17,src1.mode,operating mode,enum [off\|manual\|auto] (>=0<=0), ,true,select.connect_src1_operating_mode,select.connect_src1_mode,13,36,1,4,1
@@ -5973,49 +5975,25 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "MM200",water,161,dhw.circ,circulation active,boolean (>=0<=0), ,true,switch.water_dhw_circulation_active,switch.water_dhw_circ,19,9,1,9,1
 "MM200",water,161,dhw.circmode,circulation pump mode,enum [off\|on\|auto\|own prog] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
 "SM100, MS100",water,163,dhw.temp,current temperature,uint16,C,false,sensor.water_dhw_current_temperature,sensor.water_dhw_temp,19,9,1/10,1,1
-"SM100, MS100",water,163,dhw.storagetemp1,storage intern temperature,uint16,C,false,sensor.water_dhw_storage_intern_temperature,sensor.water_dhw_storagetemp1,19,9,1/10,16,1
-"SM100, MS100",water,163,dhw.coldtemp,cold water,uint16,C,false,sensor.water_dhw_cold_water,sensor.water_dhw_coldtemp,19,9,1/10,17,1
-"SM100, MS100",water,163,dhw.temp5,temperature 5,uint16,C,false,sensor.water_dhw_temperature_5,sensor.water_dhw_temp5,19,9,1/10,18,1
-"SM100, MS100",water,163,dhw.rettemp,return temperature,uint16,C,false,sensor.water_dhw_return_temperature,sensor.water_dhw_rettemp,19,9,1/10,19,1
+"SM100, MS100",water,163,dhw.tempstatus,temperature switch in assigned dhw (MC1),int8, ,false,sensor.water_dhw_temperature_switch_in_assigned_dhw_(MC1),sensor.water_dhw_tempstatus,19,9,1,11,1
 "SM100, MS100",water,163,dhw.pump,pump,boolean, ,false,binary_sensor.water_dhw_pump,binary_sensor.water_dhw_pump,19,9,1,4,1
 "SM100, MS100",water,163,dhw.maxtemp,maximum temperature,uint8 (>=0<=0),C,true,number.water_dhw_maximum_temperature,number.water_dhw_maxtemp,19,9,1,12,1
-"SM100, MS100",water,163,dhw.seltemp,selected temperature,uint8 (>=0<=0),C,true,number.water_dhw_selected_temperature,number.water_dhw_seltemp,19,9,1,0,1
-"SM100, MS100",water,163,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
-"SM100, MS100",water,163,dhw.hottemp,extra hot temperature,uint8 (>=0<=0),C,true,number.water_dhw_extra_hot_temperature,number.water_dhw_hottemp,19,9,1,20,1
-"SM100, MS100",water,163,dhw.dailytemp,daily temperature,uint8 (>=0<=0),C,true,number.water_dhw_daily_temperature,number.water_dhw_dailytemp,19,9,1,21,1
+"SM100, MS100",water,163,dhw.difftemp,start differential temperature,int8 (>=0<=0),C,true,number.water_dhw_start_differential_temperature,number.water_dhw_difftemp,19,9,1,13,1
 "SM100, MS100",water,163,dhw.disinfectiontemp,disinfection temperature,uint8 (>=0<=0),C,true,number.water_dhw_disinfection_temperature,number.water_dhw_disinfectiontemp,19,9,1,8,1
+"SM100, MS100",water,163,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
+"SM100, MS100",water,163,dhw.requiredtemp,required temperature,uint8 (>=0<=0),C,true,number.water_dhw_required_temperature,number.water_dhw_requiredtemp,19,9,1,15,1
 "SM100, MS100",water,163,dhw.circ,circulation active,boolean (>=0<=0), ,true,switch.water_dhw_circulation_active,switch.water_dhw_circ,19,9,1,9,1
-"SM100, MS100",water,163,dhw.circmode,circulation pump mode,enum [off\|1x3min\|2x3min\|3x3min\|4x3min\|5x3min\|6x3min\|continuous] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
-"SM100, MS100",water,163,dhw.circtc,circulation time controlled,boolean (>=0<=0), ,true,switch.water_dhw_circulation_time_controlled,switch.water_dhw_circtc,19,9,1,22,1
-"SM100, MS100",water,163,dhw.keepwarm,keep warm,boolean (>=0<=0), ,true,switch.water_dhw_keep_warm,switch.water_dhw_keepwarm,19,9,1,23,1
-"SM100, MS100",water,163,dhw.status2,status 2,enum [\|\|\|no heat\|\|\|heat request\|\|disinfecting\|hold], ,false,sensor.water_dhw_status_2,sensor.water_dhw_status2,19,9,1,24,1
-"SM100, MS100",water,163,dhw.pumpmod,pump modulation,uint8,%,false,sensor.water_dhw_pump_modulation,sensor.water_dhw_pumpmod,19,9,1,25,1
-"SM100, MS100",water,163,dhw.flow,flow rate,uint16,l/min,false,sensor.water_dhw_flow_rate,sensor.water_dhw_flow,19,9,1/10,26,1
-"SM100, MS100",water,163,dhw.valvereturn,return valve,uint8 (>=0<=0),%,true,number.water_dhw_return_valve,number.water_dhw_valvereturn,19,9,1,27,1
-"SM100, MS100",water,163,dhw.deltatret,temp. diff. return valve,uint8 (>=0<=0),K,true,number.water_dhw_temp._diff._return_valve,number.water_dhw_deltatret,19,9,1,28,1
-"SM100, MS100",water,163,dhw.errordisp,error display,enum [off\|normal\|inverted] (>=0<=0), ,true,select.water_dhw_error_display,select.water_dhw_errordisp,19,9,1,29,1
+"SM100, MS100",water,163,dhw.circmode,circulation pump mode,enum [off\|on\|auto\|own prog] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
 "SM200, MS200",water,164,dhw.temp,current temperature,uint16,C,false,sensor.water_dhw_current_temperature,sensor.water_dhw_temp,19,9,1/10,1,1
-"SM200, MS200",water,164,dhw.storagetemp1,storage intern temperature,uint16,C,false,sensor.water_dhw_storage_intern_temperature,sensor.water_dhw_storagetemp1,19,9,1/10,16,1
-"SM200, MS200",water,164,dhw.coldtemp,cold water,uint16,C,false,sensor.water_dhw_cold_water,sensor.water_dhw_coldtemp,19,9,1/10,17,1
-"SM200, MS200",water,164,dhw.temp5,temperature 5,uint16,C,false,sensor.water_dhw_temperature_5,sensor.water_dhw_temp5,19,9,1/10,18,1
-"SM200, MS200",water,164,dhw.rettemp,return temperature,uint16,C,false,sensor.water_dhw_return_temperature,sensor.water_dhw_rettemp,19,9,1/10,19,1
+"SM200, MS200",water,164,dhw.tempstatus,temperature switch in assigned dhw (MC1),int8, ,false,sensor.water_dhw_temperature_switch_in_assigned_dhw_(MC1),sensor.water_dhw_tempstatus,19,9,1,11,1
 "SM200, MS200",water,164,dhw.pump,pump,boolean, ,false,binary_sensor.water_dhw_pump,binary_sensor.water_dhw_pump,19,9,1,4,1
 "SM200, MS200",water,164,dhw.maxtemp,maximum temperature,uint8 (>=0<=0),C,true,number.water_dhw_maximum_temperature,number.water_dhw_maxtemp,19,9,1,12,1
-"SM200, MS200",water,164,dhw.seltemp,selected temperature,uint8 (>=0<=0),C,true,number.water_dhw_selected_temperature,number.water_dhw_seltemp,19,9,1,0,1
-"SM200, MS200",water,164,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
-"SM200, MS200",water,164,dhw.hottemp,extra hot temperature,uint8 (>=0<=0),C,true,number.water_dhw_extra_hot_temperature,number.water_dhw_hottemp,19,9,1,20,1
-"SM200, MS200",water,164,dhw.dailytemp,daily temperature,uint8 (>=0<=0),C,true,number.water_dhw_daily_temperature,number.water_dhw_dailytemp,19,9,1,21,1
+"SM200, MS200",water,164,dhw.difftemp,start differential temperature,int8 (>=0<=0),C,true,number.water_dhw_start_differential_temperature,number.water_dhw_difftemp,19,9,1,13,1
 "SM200, MS200",water,164,dhw.disinfectiontemp,disinfection temperature,uint8 (>=0<=0),C,true,number.water_dhw_disinfection_temperature,number.water_dhw_disinfectiontemp,19,9,1,8,1
+"SM200, MS200",water,164,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
+"SM200, MS200",water,164,dhw.requiredtemp,required temperature,uint8 (>=0<=0),C,true,number.water_dhw_required_temperature,number.water_dhw_requiredtemp,19,9,1,15,1
 "SM200, MS200",water,164,dhw.circ,circulation active,boolean (>=0<=0), ,true,switch.water_dhw_circulation_active,switch.water_dhw_circ,19,9,1,9,1
-"SM200, MS200",water,164,dhw.circmode,circulation pump mode,enum [off\|1x3min\|2x3min\|3x3min\|4x3min\|5x3min\|6x3min\|continuous] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
-"SM200, MS200",water,164,dhw.circtc,circulation time controlled,boolean (>=0<=0), ,true,switch.water_dhw_circulation_time_controlled,switch.water_dhw_circtc,19,9,1,22,1
-"SM200, MS200",water,164,dhw.keepwarm,keep warm,boolean (>=0<=0), ,true,switch.water_dhw_keep_warm,switch.water_dhw_keepwarm,19,9,1,23,1
-"SM200, MS200",water,164,dhw.status2,status 2,enum [\|\|\|no heat\|\|\|heat request\|\|disinfecting\|hold], ,false,sensor.water_dhw_status_2,sensor.water_dhw_status2,19,9,1,24,1
-"SM200, MS200",water,164,dhw.pumpmod,pump modulation,uint8,%,false,sensor.water_dhw_pump_modulation,sensor.water_dhw_pumpmod,19,9,1,25,1
-"SM200, MS200",water,164,dhw.flow,flow rate,uint16,l/min,false,sensor.water_dhw_flow_rate,sensor.water_dhw_flow,19,9,1/10,26,1
-"SM200, MS200",water,164,dhw.valvereturn,return valve,uint8 (>=0<=0),%,true,number.water_dhw_return_valve,number.water_dhw_valvereturn,19,9,1,27,1
-"SM200, MS200",water,164,dhw.deltatret,temp. diff. return valve,uint8 (>=0<=0),K,true,number.water_dhw_temp._diff._return_valve,number.water_dhw_deltatret,19,9,1,28,1
-"SM200, MS200",water,164,dhw.errordisp,error display,enum [off\|normal\|inverted] (>=0<=0), ,true,select.water_dhw_error_display,select.water_dhw_errordisp,19,9,1,29,1
+"SM200, MS200",water,164,dhw.circmode,circulation pump mode,enum [off\|on\|auto\|own prog] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
 "MP100",pool,204,pooltemp,pool temperature,int16,C,false,sensor.pool_pool_temperature,sensor.pool_pooltemp,20,0,1/10,-1,1
 "MP100",pool,204,poolshuntstatus,pool shunt status opening/closing,enum [stopped\|opening\|closing\|open\|close], ,false,sensor.pool_pool_shunt_status_opening/closing,sensor.pool_poolshuntstatus,20,0,1,-1,1
 "MP100",pool,204,poolshunt,pool shunt open/close (0% = pool / 100% = heat),uint8,%,false,sensor.pool_pool_shunt_open/close_(0%_=_pool_/_100%_=_heat),sensor.pool_poolshunt,20,0,1,-1,1
@@ -13,7 +13,7 @@ telegram_type_id,name,is_fetched
 0x19,UBAMonitorSlow, 
 0x1A,UBASetPoints, 
 0x1C,UBAMaintenanceStatus, 
-0x1E,HydrTemp, 
+0x1E,WM10TempMessage, 
 0x23,JunkersSetMixer,fetched
 0x27,UBASettingsWW,fetched
 0x28,WeatherComp,fetched
@@ -77,7 +77,7 @@ telegram_type_id,name,is_fetched
 0x0103,ISM1StatusMessage,fetched
 0x0104,ISM2StatusMessage, 
 0x010C,IPMStatusMessage, 
-0x011E,IPMTempMessage, 
+0x011E,JunkersDisp,fetched
 0x012E,HPEnergy1, 
 0x013B,HPEnergy2, 
 0x0165,JunkersSet, 
@@ -112,10 +112,10 @@ telegram_type_id,name,is_fetched
 0x02A0,RC300Curves, 
 0x02A1,RC300Curves, 
 0x02A2,RC300Curves, 
-0x02A5,RC300Monitor, 
+0x02A5,CRFMonitor, 
 0x02A6,RC300Monitor, 
 0x02A7,RC300Monitor, 
-0x02A8,RC300Monitor, 
+0x02A8,CRFMonitor, 
 0x02A9,RC300Monitor, 
 0x02AA,RC300Monitor, 
 0x02AB,RC300Monitor, 
@@ -171,15 +171,15 @@ telegram_type_id,name,is_fetched
 0x0468,HPSet, 
 0x0469,HPSet, 
 0x046A,HPSet, 
-0x0470,RC300Summer2,fetched
-0x0471,RC300Summer2, 
-0x0472,RC300Summer2, 
-0x0473,RC300Summer2, 
-0x0474,RC300Summer2, 
-0x0475,RC300Summer2, 
-0x0476,RC300Summer2, 
-0x0477,RC300Summer2, 
-0x0478,RC300Summer2, 
+0x0470,RC300Summer3,fetched
+0x0471,RC300Sumr2, 
+0x0472,RC300Sumr2, 
+0x0473,RC300Sumr2, 
+0x0474,RC300Sumr2, 
+0x0475,RC300Sumr2, 
+0x0476,RC300Sumr2, 
+0x0477,RC300Sumr2, 
+0x0478,RC300Sumr2, 
 0x047B,HP2, 
 0x0484,HPSilentMode,fetched
 0x0485,HpCooling,fetched
@@ -199,7 +199,7 @@ telegram_type_id,name,is_fetched
 0x04A2,HpInput,fetched
 0x04A5,HPFan,fetched
 0x04A7,HPPowerLimit,fetched
-0x04AA,HPPower, 
+0x04AA,HPPower2,fetched
 0x04AE,HPEnergy,fetched
 0x04AF,HPMeters,fetched
 0x055C,VentilationSet,fetched
@@ -24,6 +24,7 @@ build_flags =
    -D FACTORY_NTP_TIME_ZONE_LABEL=\"Europe/Amsterdam\"
    -D FACTORY_NTP_TIME_ZONE_FORMAT=\"CET-1CEST,M3.5.0,M10.5.0/3\"
    -D FACTORY_NTP_SERVER=\"time.google.com\"
+    -D FACTORY_NTP_THERMOSTAT_SYNC=0

    ; MQTT settings
    -D FACTORY_MQTT_ENABLED=false
@@ -26,8 +26,8 @@
    "@alova/adapter-xhr": "2.3.1",
    "@emotion/react": "^11.14.0",
    "@emotion/styled": "^11.14.1",
-    "@mui/icons-material": "^9.0.1",
-    "@mui/material": "^9.0.1",
+    "@mui/icons-material": "^9.2.0",
+    "@mui/material": "^9.2.0",
    "@preact/compat": "^18.3.2",
    "@table-library/react-table-library": "4.1.15",
    "alova": "3.5.1",
@@ -37,17 +37,17 @@
    "jwt-decode": "^4.0.0",
    "magic-string": "^0.30.21",
    "mime-types": "^3.0.2",
-    "preact": "^10.29.1",
-    "react": "^19.2.6",
-    "react-dom": "^19.2.6",
-    "react-icons": "^5.6.0",
-    "react-router": "^7.15.0",
+    "preact": "^10.29.7",
+    "react": "^19.2.7",
+    "react-dom": "^19.2.7",
+    "react-icons": "^5.7.0",
+    "react-router": "^7.18.1",
    "react-toastify": "^11.1.0",
    "typesafe-i18n": "^5.27.1",
    "typescript": "^6.0.3"
  },
  "devDependencies": {
-    "@babel/core": "^7.29.0",
+    "@babel/core": "^7.29.7",
    "@eslint/js": "^10.0.1",
    "@preact/compat": "^18.3.2",
    "@preact/preset-vite": "^2.10.5",
@@ -55,11 +55,11 @@
    "@types/node": "^25.7.0",
    "@types/react": "^19.2.14",
    "@types/react-dom": "^19.2.3",
-    "axe-core": "^4.11.4",
-    "concurrently": "^9.2.1",
-    "eslint": "^10.3.0",
+    "axe-core": "^4.12.1",
+    "concurrently": "^9.2.4",
+    "eslint": "^10.7.0",
    "eslint-config-prettier": "^10.1.8",
-    "prettier": "^3.8.3",
+    "prettier": "^3.9.5",
    "rollup-plugin-visualizer": "^7.0.1",
    "terser": "^5.47.1",
    "typescript-eslint": "^8.59.3",
@@ -1,3 +1,28 @@
+allowBuilds:
+  cwebp-bin: set this to true or false
+  esbuild: set this to true or false
+  gifsicle: set this to true or false
+  jpegtran-bin: set this to true or false
+  mozjpeg: set this to true or false
+  optipng-bin: set this to true or false
+  pngquant-bin: set this to true or false
+minimumReleaseAgeExclude:
+  - '@babel/code-frame@7.29.7'
+  - '@babel/compat-data@7.29.7'
+  - '@babel/core@7.29.7'
+  - '@babel/generator@7.29.7'
+  - '@babel/helper-compilation-targets@7.29.7'
+  - '@babel/helper-globals@7.29.7'
+  - '@babel/helper-module-imports@7.29.7'
+  - '@babel/helper-module-transforms@7.29.7'
+  - '@babel/helper-string-parser@7.29.7'
+  - '@babel/helper-validator-identifier@7.29.7'
+  - '@babel/helper-validator-option@7.29.7'
+  - '@babel/helpers@7.29.7'
+  - '@babel/parser@7.29.7'
+  - '@babel/template@7.29.7'
+  - '@babel/traverse@7.29.7'
+  - '@babel/types@7.29.7'
 onlyBuiltDependencies:
  - cwebp-bin
  - esbuild
@@ -19,7 +19,7 @@ const AVAILABLE_LOCALES = [
  'sk',
  'sv',
  'tr',
-  'cz'
+  'cs'
 ] as Locales[];

 // Static toast configuration - no need to recreate on every render
@@ -13,11 +13,7 @@ import VisibilityOutlinedIcon from '@mui/icons-material/VisibilityOutlined';
 import type { SvgIconProps } from '@mui/material';

 export type OptionType =
-  | 'deleted'
-  | 'readonly'
-  | 'web_exclude'
-  | 'api_mqtt_exclude'
-  | 'favorite';
+  'deleted' | 'readonly' | 'web_exclude' | 'api_mqtt_exclude' | 'favorite';

 type IconPair = [
  React.ComponentType<SvgIconProps>,
@@ -396,7 +396,7 @@ const ApplicationSettings = () => {
              margin="normal"
              select
            >
-              <MenuItem value="cz">Česky (CZ)</MenuItem>
+              <MenuItem value="cs">Česky (CS)</MenuItem>
              <MenuItem value="de">Deutsch (DE)</MenuItem>
              <MenuItem value="en">English (EN)</MenuItem>
              <MenuItem value="fr">Français (FR)</MenuItem>
@@ -12,6 +12,7 @@ import {
  DialogActions,
  DialogContent,
  DialogTitle,
+  Grid,
  MenuItem,
  TextField,
  Typography
@@ -39,7 +40,12 @@ import { formatLocalDateTime, updateValueDirty, useRest } from 'utils';
 import { ValidationError, validate } from 'validators';
 import { NTP_SETTINGS_VALIDATOR } from 'validators/ntp';

-import { TIME_ZONES, selectedTimeZone, useTimeZoneSelectItems } from './TZ';
+import {
+  TIME_ZONES,
+  selectedTimeZone,
+  timeZoneSelectItemsT,
+  useTimeZoneSelectItems
+} from './TZ';

 const NTPSettings = () => {
  const {
@@ -63,13 +69,17 @@ const NTPSettings = () => {

  // Memoized timezone select items for better performance
  const timeZoneItems = useTimeZoneSelectItems();
+  const timeZoneItemsT = timeZoneSelectItemsT();

  // Memoized selected timezone value
  const selectedTzValue = useMemo(
    () => (data ? selectedTimeZone(data.tz_label, data.tz_format) : undefined),
    [data?.tz_label, data?.tz_format]
  );
-
+  const selectedTzValueT = useMemo(
+    () => (data ? selectedTimeZone(data.tz_label_t, data.tz_format_t) : undefined),
+    [data?.tz_label_t, data?.tz_format_t]
+  );
  const [localTime, setLocalTime] = useState<string>('');
  const [settingTime, setSettingTime] = useState<boolean>(false);
  const [processing, setProcessing] = useState<boolean>(false);
@@ -150,6 +160,18 @@ const NTPSettings = () => {
    [updateFormValue]
  );

+  const changeTimeZoneT = useCallback(
+    (event: React.ChangeEvent<HTMLInputElement>) => {
+      void updateState(readNTPSettings(), (settings: NTPSettingsType) => ({
+        ...settings,
+        tz_label_t: event.target.value,
+        tz_format_t: TIME_ZONES[event.target.value]
+      }));
+      updateFormValue(event);
+    },
+    [updateFormValue]
+  );
+
  // Memoize render content to prevent unnecessary re-renders
  const renderContent = useMemo(() => {
    if (!data) {
@@ -174,6 +196,7 @@ const NTPSettings = () => {
          label={LL.NTP_SERVER()}
          fullWidth
          variant="outlined"
+          disabled={!data.enabled}
          value={data.server}
          onChange={updateFormValue}
          margin="normal"
@@ -192,7 +215,47 @@ const NTPSettings = () => {
          <MenuItem disabled>{LL.TIME_ZONE()}...</MenuItem>
          {timeZoneItems}
        </ValidatedTextField>
-
+        {data.enabled && (
+          <Grid container spacing={2} rowSpacing={0}>
+            <Grid>
+              <ValidatedTextField
+                fieldErrors={fieldErrors || {}}
+                name="thermostat_sync"
+                label="Sync EMS-Thermostat"
+                variant="outlined"
+                sx={{ width: '30ch' }}
+                value={data.thermostat_sync}
+                onChange={updateFormValue}
+                margin="normal"
+                select
+              >
+                <MenuItem value={0}>{LL.OFF()}</MenuItem>
+                <MenuItem value={1}>{LL.ON()}</MenuItem>
+                <MenuItem value={2}>
+                  {LL.USE()} {LL.TIME_ZONE()}
+                </MenuItem>
+              </ValidatedTextField>
+            </Grid>
+            <Grid>
+              {data.thermostat_sync === 2 && (
+                <ValidatedTextField
+                  fieldErrors={fieldErrors || {}}
+                  name="tz_label_t"
+                  label={LL.TIME_ZONE() + ' Thermostat'}
+                  sx={{ width: '30ch' }}
+                  variant="outlined"
+                  value={selectedTzValueT}
+                  onChange={changeTimeZoneT}
+                  margin="normal"
+                  select
+                >
+                  <MenuItem disabled>{LL.TIME_ZONE()}...</MenuItem>
+                  {timeZoneItemsT}
+                </ValidatedTextField>
+              )}
+            </Grid>
+          </Grid>
+        )}
        <Box sx={{ display: 'flex', flexWrap: 'wrap' }}>
          {!data.enabled && !dirtyFlags.length && (
            <Box sx={{ flexWrap: 'nowrap', whiteSpace: 'nowrap' }}>
@@ -243,6 +306,7 @@ const NTPSettings = () => {
    updateFormValue,
    fieldErrors,
    selectedTzValue,
+    selectedTzValueT,
    changeTimeZone,
    timeZoneItems,
    dirtyFlags,
@@ -495,3 +495,7 @@ const precomputedTimeZoneItems = TIME_ZONE_LABELS.map((label) => (
 export function timeZoneSelectItems() {
  return precomputedTimeZoneItems;
 }
+
+export function timeZoneSelectItemsT() {
+  return precomputedTimeZoneItems;
+}
@@ -28,7 +28,7 @@ interface LanguageOption {
 }

 const LANGUAGE_OPTIONS: LanguageOption[] = [
-  { key: 'cz', flag: CZflag, label: 'CZ' },
+  { key: 'cs', flag: CZflag, label: 'CS' },
  { key: 'de', flag: DEflag, label: 'DE' },
  { key: 'en', flag: GBflag, label: 'EN' },
  { key: 'fr', flag: FRflag, label: 'FR' },
@@ -1,6 +1,6 @@
 import type { Translation } from '../i18n-types';

-const cz: Translation = {
+const cs: Translation = {
  LANGUAGE: 'Jazyk',
  RETRY: 'Zkusit znovu',
  LOADING: 'Načítání',
@@ -368,4 +368,4 @@ const cz: Translation = {

 };

-export default cz;
+export default cs;
@@ -16,6 +16,9 @@ export interface NTPSettingsType {
  server: string;
  tz_label: string;
  tz_format: string;
+  thermostat_sync: number;
+  tz_label_t: string;
+  tz_format_t: string;
 }

 export interface Time {
@@ -79,8 +79,12 @@ class DummySettings {
    uint8_t provisionMode = 0;

    // NTP
-    String server  = "pool.ntp.org";
-    String tzLabel = "Europe/London";
+    String  server          = "pool.ntp.org";
+    String  tzLabel         = "Europe/London";
+    String  tzFormat        = "GMT0BST,M3.5.0/1,M10.5.0";
+    String  tzLabelT        = "Europe/Berlin";
+    String  tzFormatT       = "CET-1CEST,M3.5.0,M10.5.0/3";
+    uint8_t thermostat_sync = 0;

    static void read(DummySettings & settings, JsonObject root) {};
    static void read(DummySettings & settings) {};
@@ -2,6 +2,7 @@
  "name": "mock-api",
  "version": "3.8.2",
  "description": "mock api for EMS-ESP",
+  "type": "module",
  "author": "proddy, emsesp.org",
  "license": "MIT",
  "scripts": {
@@ -12,8 +13,8 @@
    "@msgpack/msgpack": "^3.1.3",
    "@trivago/prettier-plugin-sort-imports": "^6.0.2",
    "formidable": "^3.5.4",
-    "itty-router": "^5.0.23",
-    "prettier": "^3.8.3"
+    "itty-router": "^5.0.24",
+    "prettier": "^3.9.6"
  },
  "packageManager": "pnpm@10.33.4+sha512.1c67b3b359b2d408119ba1ed289f34b8fc3c6873412bec6fd264fbdc82489e510fcbecb9ce9d22dae7f3b76269d8441046014bdca53b9979cd7a561ad631b800"
 }
@@ -13,54 +13,54 @@ importers:
        version: 3.1.3
      '@trivago/prettier-plugin-sort-imports':
        specifier: ^6.0.2
-        version: 6.0.2(prettier@3.8.3)
+        version: 6.0.2(prettier@3.9.6)
      formidable:
        specifier: ^3.5.4
        version: 3.5.4
      itty-router:
-        specifier: ^5.0.23
-        version: 5.0.23
+        specifier: ^5.0.24
+        version: 5.0.24
      prettier:
-        specifier: ^3.8.3
-        version: 3.8.3
+        specifier: ^3.9.6
+        version: 3.9.6

 packages:

-  '@babel/code-frame@7.29.0':
-    resolution: {integrity: sha512-9NhCeYjq9+3uxgdtp20LSiJXJvN0FeCtNGpJxuMFZ1Kv3cWUNb6DOhJwUvcVCzKGR66cw4njwM6hrJLqgOwbcw==}
+  '@babel/code-frame@7.29.7':
+    resolution: {integrity: sha512-Aup7aUOfpbAUg2ROOJN6Iw5f9DMBlzu0mIkm/malLQFN/YQgO48wCj0Kxa3sEHJvPVFg7siR+qRInwXd2qhQKw==}
    engines: {node: '>=6.9.0'}

-  '@babel/generator@7.29.1':
-    resolution: {integrity: sha512-qsaF+9Qcm2Qv8SRIMMscAvG4O3lJ0F1GuMo5HR/Bp02LopNgnZBC/EkbevHFeGs4ls/oPz9v+Bsmzbkbe+0dUw==}
+  '@babel/generator@7.29.8':
+    resolution: {integrity: sha512-gZbepsdh3WDtgZKWL+vTPh71LSBrm/Y4/QDZBVCcYfmeTEEuoOYwlSy+G1StfJg+/Zy550u/3TATbm7qDbbMtg==}
    engines: {node: '>=6.9.0'}

-  '@babel/helper-globals@7.28.0':
-    resolution: {integrity: sha512-+W6cISkXFa1jXsDEdYA8HeevQT/FULhxzR99pxphltZcVaugps53THCeiWA8SguxxpSp3gKPiuYfSWopkLQ4hw==}
+  '@babel/helper-globals@7.29.7':
+    resolution: {integrity: sha512-3nQVUAtvkKH9zahfWgw96Jc/uFOmjACE1kQz82E2lqWmHBgjzbNlsC22nuQTfahmWeQtTq5nQ/4Nnd2A1wj4zA==}
    engines: {node: '>=6.9.0'}

-  '@babel/helper-string-parser@7.27.1':
-    resolution: {integrity: sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA==}
+  '@babel/helper-string-parser@7.29.7':
+    resolution: {integrity: sha512-Pb5ijPrZ89GDH8223L4UP8i6QApWxs04RbPQJTeWDV0/keR2E36MeKnyr6LYmUUvqRRI+Iv87SuF1W6ErINzYw==}
    engines: {node: '>=6.9.0'}

-  '@babel/helper-validator-identifier@7.28.5':
-    resolution: {integrity: sha512-qSs4ifwzKJSV39ucNjsvc6WVHs6b7S03sOh2OcHF9UHfVPqWWALUsNUVzhSBiItjRZoLHx7nIarVjqKVusUZ1Q==}
+  '@babel/helper-validator-identifier@7.29.7':
+    resolution: {integrity: sha512-qehxGkRj55h/ff8EMaJ+cYhyaKlHIxqYDn682wQD7RNp9UujOQsHog2uS0r2vzr4pW+sXf90NeeayjcNaX3fFg==}
    engines: {node: '>=6.9.0'}

-  '@babel/parser@7.29.3':
-    resolution: {integrity: sha512-b3ctpQwp+PROvU/cttc4OYl4MzfJUWy6FZg+PMXfzmt/+39iHVF0sDfqay8TQM3JA2EUOyKcFZt75jWriQijsA==}
+  '@babel/parser@7.29.8':
+    resolution: {integrity: sha512-E8lTAYNB1KW+FH+VGJuZM1ioAx2E6oVlvQFRrf5P8ZZmsiJXYAD9vTFV7yyEURNzgh1dFqMZuO6tUwcARbqFCA==}
    engines: {node: '>=6.0.0'}
    hasBin: true

-  '@babel/template@7.28.6':
-    resolution: {integrity: sha512-YA6Ma2KsCdGb+WC6UpBVFJGXL58MDA6oyONbjyF/+5sBgxY/dwkhLogbMT2GXXyU84/IhRw/2D1Os1B/giz+BQ==}
+  '@babel/template@7.29.7':
+    resolution: {integrity: sha512-puq+Gf35oI24FeN11LkoUQFqv9uwNeWpxXZi/Ji3rRIoKAzKnxRaZ+Gkj0vKS9ZCiTESfng1N9LyOyXvo+m+Gg==}
    engines: {node: '>=6.9.0'}

-  '@babel/traverse@7.29.0':
-    resolution: {integrity: sha512-4HPiQr0X7+waHfyXPZpWPfWL/J7dcN1mx9gL6WdQVMbPnF3+ZhSMs8tCxN7oHddJE9fhNE7+lxdnlyemKfJRuA==}
+  '@babel/traverse@7.29.8':
+    resolution: {integrity: sha512-I5z7H3bf/41ktsNVLtpN0wAa336HkqIHQ5BuPLEhTkt1jVSyZpeNKIzTgEWmlxjdg81R0IgUCcaE+Ok3NvrfZg==}
    engines: {node: '>=6.9.0'}

-  '@babel/types@7.29.0':
-    resolution: {integrity: sha512-LwdZHpScM4Qz8Xw2iKSzS+cfglZzJGvofQICy7W7v4caru4EaAmyUuO6BGrbyQ2mYV11W0U8j5mBhd14dd3B0A==}
+  '@babel/types@7.29.8':
+    resolution: {integrity: sha512-Vj1jF3cPfxg7OAfoI7QnVKLoILlm2JF9pnVHrX8qx7AHMiYWT+NDAA7jChlNgRS4WTLc/fD1lXLmPixluj+3Gg==}
    engines: {node: '>=6.9.0'}

  '@jridgewell/gen-mapping@0.3.13':
@@ -112,8 +112,8 @@ packages:
  balanced-match@1.0.2:
    resolution: {integrity: sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==}

-  brace-expansion@2.1.0:
-    resolution: {integrity: sha512-TN1kCZAgdgweJhWWpgKYrQaMNHcDULHkWwQIspdtjV4Y5aurRdZpjAqn6yX3FPqTA9ngHCc4hJxMAMgGfve85w==}
+  brace-expansion@2.1.4:
+    resolution: {integrity: sha512-hGfVzPxthbf3+2yjg/RBs60cB0FhqBS/zvdV/4wn4/BmN0bNMMHPc4V/BbFieqf1TKAGGAHnY4eSjajCl0f2Xg==}

  debug@4.4.3:
    resolution: {integrity: sha512-RGwwWnwQvkVfavKVt22FGLw+xYSdzARwm0ru6DhTVA3umU5hZc28V3kO4stgYryrTlLpuvgI9GiijltAjNbcqA==}
@@ -131,8 +131,8 @@ packages:
    resolution: {integrity: sha512-YikH+7CUTOtP44ZTnUhR7Ic2UASBPOqmaRkRKxRbywPTe5VxF7RRCck4af9wutiZ/QKM5nME9Bie2fFaPz5Gug==}
    engines: {node: '>=14.0.0'}

-  itty-router@5.0.23:
-    resolution: {integrity: sha512-i49WU+SNPrwOZA4Z61En1RYd5h2Lcqa+5IvCpMrNi4dxymzJK15ozUUnRrWIUAv95Zamd4eJPAot2UvHRrQg7w==}
+  itty-router@5.0.24:
+    resolution: {integrity: sha512-PXij1qGKtE6jg3dLgrTRdh/Frovl5Wc4Av67sD2xfhDPrgNt4u79++/il8/c/OfZGkhD/8uYJub8tjo+H165rA==}

  javascript-natural-sort@0.7.1:
    resolution: {integrity: sha512-nO6jcEfZWQXDhOiBtG2KvKyEptz7RVbpGP4vTD2hLBdmNQSsCiicO2Ioinv6UI4y9ukqnBpy+XZ9H6uLNgJTlw==}
@@ -167,8 +167,8 @@ packages:
  picocolors@1.1.1:
    resolution: {integrity: sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA==}

-  prettier@3.8.3:
-    resolution: {integrity: sha512-7igPTM53cGHMW8xWuVTydi2KO233VFiTNyF5hLJqpilHfmn8C8gPf+PS7dUT64YcXFbiMGZxS9pCSxL/Dxm/Jw==}
+  prettier@3.9.6:
+    resolution: {integrity: sha512-OpN0zzVdiaiAhxpuuj5efpIS4sY9j7bY6uR5mnj5yPzGkdkjNKSJeUThPb60Jw29QuAZgA4o+/iB49kFiaBX6g==}
    engines: {node: '>=14'}
    hasBin: true

@@ -177,52 +177,52 @@ packages:

 snapshots:

-  '@babel/code-frame@7.29.0':
+  '@babel/code-frame@7.29.7':
    dependencies:
-      '@babel/helper-validator-identifier': 7.28.5
+      '@babel/helper-validator-identifier': 7.29.7
      js-tokens: 4.0.0
      picocolors: 1.1.1

-  '@babel/generator@7.29.1':
+  '@babel/generator@7.29.8':
    dependencies:
-      '@babel/parser': 7.29.3
-      '@babel/types': 7.29.0
+      '@babel/parser': 7.29.8
+      '@babel/types': 7.29.8
      '@jridgewell/gen-mapping': 0.3.13
      '@jridgewell/trace-mapping': 0.3.31
      jsesc: 3.1.0

-  '@babel/helper-globals@7.28.0': {}
+  '@babel/helper-globals@7.29.7': {}

-  '@babel/helper-string-parser@7.27.1': {}
+  '@babel/helper-string-parser@7.29.7': {}

-  '@babel/helper-validator-identifier@7.28.5': {}
+  '@babel/helper-validator-identifier@7.29.7': {}

-  '@babel/parser@7.29.3':
+  '@babel/parser@7.29.8':
    dependencies:
-      '@babel/types': 7.29.0
+      '@babel/types': 7.29.8

-  '@babel/template@7.28.6':
+  '@babel/template@7.29.7':
    dependencies:
-      '@babel/code-frame': 7.29.0
-      '@babel/parser': 7.29.3
-      '@babel/types': 7.29.0
+      '@babel/code-frame': 7.29.7
+      '@babel/parser': 7.29.8
+      '@babel/types': 7.29.8

-  '@babel/traverse@7.29.0':
+  '@babel/traverse@7.29.8':
    dependencies:
-      '@babel/code-frame': 7.29.0
-      '@babel/generator': 7.29.1
-      '@babel/helper-globals': 7.28.0
-      '@babel/parser': 7.29.3
-      '@babel/template': 7.28.6
-      '@babel/types': 7.29.0
+      '@babel/code-frame': 7.29.7
+      '@babel/generator': 7.29.8
+      '@babel/helper-globals': 7.29.7
+      '@babel/parser': 7.29.8
+      '@babel/template': 7.29.7
+      '@babel/types': 7.29.8
      debug: 4.4.3
    transitivePeerDependencies:
      - supports-color

-  '@babel/types@7.29.0':
+  '@babel/types@7.29.8':
    dependencies:
-      '@babel/helper-string-parser': 7.27.1
-      '@babel/helper-validator-identifier': 7.28.5
+      '@babel/helper-string-parser': 7.29.7
+      '@babel/helper-validator-identifier': 7.29.7

  '@jridgewell/gen-mapping@0.3.13':
    dependencies:
@@ -246,17 +246,17 @@ snapshots:
    dependencies:
      '@noble/hashes': 1.8.0

-  '@trivago/prettier-plugin-sort-imports@6.0.2(prettier@3.8.3)':
+  '@trivago/prettier-plugin-sort-imports@6.0.2(prettier@3.9.6)':
    dependencies:
-      '@babel/generator': 7.29.1
-      '@babel/parser': 7.29.3
-      '@babel/traverse': 7.29.0
-      '@babel/types': 7.29.0
+      '@babel/generator': 7.29.8
+      '@babel/parser': 7.29.8
+      '@babel/traverse': 7.29.8
+      '@babel/types': 7.29.8
      javascript-natural-sort: 0.7.1
      lodash-es: 4.18.1
      minimatch: 9.0.9
      parse-imports-exports: 0.2.4
-      prettier: 3.8.3
+      prettier: 3.9.6
    transitivePeerDependencies:
      - supports-color

@@ -264,7 +264,7 @@ snapshots:

  balanced-match@1.0.2: {}

-  brace-expansion@2.1.0:
+  brace-expansion@2.1.4:
    dependencies:
      balanced-match: 1.0.2

@@ -283,7 +283,7 @@ snapshots:
      dezalgo: 1.0.4
      once: 1.4.0

-  itty-router@5.0.23: {}
+  itty-router@5.0.24: {}

  javascript-natural-sort@0.7.1: {}

@@ -295,7 +295,7 @@ snapshots:

  minimatch@9.0.9:
    dependencies:
-      brace-expansion: 2.1.0
+      brace-expansion: 2.1.4

  ms@2.1.3: {}

@@ -311,6 +311,6 @@ snapshots:

  picocolors@1.1.1: {}

-  prettier@3.8.3: {}
+  prettier@3.9.6: {}

  wrappy@1.0.2: {}
@@ -141,8 +141,8 @@ let system_status = {
 let DEV_VERSION_IS_UPGRADEABLE: boolean;
 let STABLE_VERSION_IS_UPGRADEABLE: boolean;
 let THIS_VERSION: string;
-let LATEST_STABLE_VERSION = '3.8.2';
-let LATEST_DEV_VERSION = '3.8.3-dev.2';
+let LATEST_STABLE_VERSION = '3.8.3';
+let LATEST_DEV_VERSION = '3.9.0-dev.0';

 // scenarios for testing versioning
 let version_test = 0; // on latest stable, or switch to dev
@@ -4139,7 +4139,7 @@ let emsesp_schedule = {
      id: 5,
      active: false,
      flags: 130,
-      time: 'system/network info/rssi < -70',
+      time: 'system/network/rssi < -70',
      cmd: 'system/restart',
      value: '',
      name: 'bad_wifi'
@@ -39,7 +39,7 @@ build_flags =
  -D CONFIG_ASYNC_TCP_PRIORITY=10 ; default
  -D CONFIG_ASYNC_TCP_QUEUE_SIZE=64 ; default
  -D CONFIG_ASYNC_TCP_RUNNING_CORE=1 ; force async_tcp task to be on same core as Arduino app (default is any core)
-  -D CONFIG_ASYNC_TCP_STACK_SIZE=6144 ; default is 16KB/8192*2
+  -D CONFIG_ASYNC_TCP_STACK_SIZE=8192 ; default is 16KB/8192*2
  ; ESPAsyncWebServer
  ; -D WS_MAX_QUEUED_MESSAGES=0 ; not used, default 8
  ; -D SSE_MAX_QUEUED_MESSAGES=1 ; for log messages, default 32
@@ -105,7 +105,7 @@ board_build.filesystem = littlefs
 lib_deps =
  bblanchon/ArduinoJson @ 7.4.3
  ESP32Async/AsyncTCP @ 3.4.10
-  ESP32Async/ESPAsyncWebServer @ 3.11.0
+  ESP32Async/ESPAsyncWebServer @ 3.11.2
  ; https://github.com/emsesp/EMS-ESP-Modules.git @ 1.0.8

 ; builds the web interface only, not the firmware
@@ -88,34 +88,6 @@ def bin_copy(source, target, env):
    print(f"MD5: {md5_hash}")
    md5_file.write_text(md5_hash)

-    # Make a copy using the old 3.6.x filename format for backwards compatibility
-    # Note: there is a chance newer E32V2s (which use the 16MB partition table and PSRAM) 
-    # are running a custom build of the 3.6.5 firmware as 3.6.5 was released before 
-    # production of the gateway board. Updating via the WebUI will break the system 
-    # and require a manual update.
-    
-    pio_env = env.get('PIOENV', '')
-    extra_variant = None
-    
-    if pio_env == "s3_16M_P":
-        extra_variant = f"EMS-ESP-{app_version.replace('.', '_')}-ESP32_S3"
-    elif pio_env == "s_4M":
-        extra_variant = f"EMS-ESP-{app_version.replace('.', '_')}-ESP32"
-
-    if extra_variant:
-        extra_bin_file = firmware_dir / f"{extra_variant}.bin"
-        extra_md5_file = firmware_dir / f"{extra_variant}.md5"
-        
-        # Remove existing files if they exist
-        for file_path in [extra_bin_file, extra_md5_file]:
-            if file_path.exists():
-                file_path.unlink()
-        
-        # Copy files
-        shutil.copy2(str(bin_file), str(extra_bin_file))
-        shutil.copy2(str(md5_file), str(extra_md5_file))
-        print(f"Filename copy for 3.6.x: {extra_bin_file}")
-
    print("=" * 90)


@@ -3,28 +3,34 @@
 # run from root folder, like `sh ./scripts/update_all.sh`
 # as well as GNUMake (make) and python3

+# abort on first error so a failed lint/build isn't silently swallowed
+set -e
+
 cd interface
 rm -rf node_modules
-corepack use pnpm@latest-10
-pnpm update --latest
+corepack use pnpm@latest
+pnpm update
 pnpm install
 pnpm format
 pnpm lint
+pnpm build-webUI

 cd ../mock-api
 rm -rf node_modules
-corepack use pnpm@latest-10
-pnpm update --latest
+corepack use pnpm@latest
+pnpm update
 pnpm install
 pnpm format

-cd ..
-cd interface
-pnpm build-webUI
-
 cd ..
 npx cspell "**"

-# platformio run -e build_modbus
-# platformio run -e build_standalone
-# platformio run -e native-test -t exec
+# build files that go into docs folder
+
+platformio run -e build_modbus -t clean
+platformio run -e build_modbus
+platformio run -e build_standalone -t clean
+platformio run -e build_standalone
+
+# run tests
+platformio run -e native-test -t exec
@@ -86,16 +86,22 @@ void NTPSettingsService::ntp_received(struct timeval * tv) {
 }

 void NTPSettings::read(NTPSettings & settings, JsonObject root) {
-    root["enabled"]   = settings.enabled;
-    root["server"]    = settings.server;
-    root["tz_label"]  = settings.tzLabel;
-    root["tz_format"] = settings.tzFormat;
+    root["enabled"]         = settings.enabled;
+    root["server"]          = settings.server;
+    root["tz_label"]        = settings.tzLabel;
+    root["tz_format"]       = settings.tzFormat;
+    root["thermostat_sync"] = settings.thermostat_sync;
+    root["tz_label_t"]      = settings.tzLabelT;
+    root["tz_format_t"]     = settings.tzFormatT;
 }

 StateUpdateResult NTPSettings::update(JsonObject root, NTPSettings & settings) {
-    settings.enabled  = root["enabled"] | FACTORY_NTP_ENABLED;
-    settings.server   = root["server"] | FACTORY_NTP_SERVER;
-    settings.tzLabel  = root["tz_label"] | FACTORY_NTP_TIME_ZONE_LABEL;
-    settings.tzFormat = root["tz_format"] | FACTORY_NTP_TIME_ZONE_FORMAT;
+    settings.enabled         = root["enabled"] | FACTORY_NTP_ENABLED;
+    settings.server          = root["server"] | FACTORY_NTP_SERVER;
+    settings.tzLabel         = root["tz_label"] | FACTORY_NTP_TIME_ZONE_LABEL;
+    settings.tzFormat        = root["tz_format"] | FACTORY_NTP_TIME_ZONE_FORMAT;
+    settings.thermostat_sync = root["thermostat_sync"] | FACTORY_NTP_THERMOSTAT_SYNC;
+    settings.tzLabelT        = root["tz_label_t"] | FACTORY_NTP_TIME_ZONE_LABEL;
+    settings.tzFormatT       = root["tz_format_t"] | FACTORY_NTP_TIME_ZONE_FORMAT;
    return StateUpdateResult::CHANGED;
-}
+}
@@ -19,6 +19,10 @@
 #define FACTORY_NTP_TIME_ZONE_FORMAT "GMT0BST,M3.5.0/1,M10.5.0"
 #endif

+#ifndef FACTORY_NTP_THERMOSTAT_SYNC
+#define FACTORY_NTP_THERMOSTAT_SYNC 1
+#endif
+
 #ifndef FACTORY_NTP_SERVER
 #define FACTORY_NTP_SERVER "time.google.com"
 #endif
@@ -30,10 +34,13 @@

 class NTPSettings {
  public:
-    bool   enabled  = FACTORY_NTP_ENABLED;
-    String tzLabel  = FACTORY_NTP_TIME_ZONE_LABEL;
-    String tzFormat = FACTORY_NTP_TIME_ZONE_FORMAT;
-    String server   = FACTORY_NTP_SERVER;
+    bool    enabled         = FACTORY_NTP_ENABLED;
+    String  tzLabel         = FACTORY_NTP_TIME_ZONE_LABEL;
+    String  tzFormat        = FACTORY_NTP_TIME_ZONE_FORMAT;
+    String  server          = FACTORY_NTP_SERVER;
+    uint8_t thermostat_sync = FACTORY_NTP_THERMOSTAT_SYNC;
+    String  tzLabelT        = FACTORY_NTP_TIME_ZONE_LABEL;
+    String  tzFormatT       = FACTORY_NTP_TIME_ZONE_FORMAT;

    static void              read(NTPSettings & settings, JsonObject root);
    static StateUpdateResult update(JsonObject root, NTPSettings & settings);
@@ -48,7 +48,7 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
            // LittleFS filesystem image
            _is_filesystem = true;
            _md5[0]        = '\0'; // clear any stale md5 so Update.end() doesn't compare against it
-        } else if ((extension == "bin") && (filesize > 2000000)) {
+        } else if ((extension == "bin") && (filesize > 1000000)) {
            _is_firmware = true;
        } else if (extension == "json") {
            _md5[0] = '\0'; // clear md5
@@ -15,7 +15,7 @@ void WiFiScanner::scanNetworks(AsyncWebServerRequest * request) {

    if (WiFi.scanComplete() != -1) {
        WiFi.scanDelete();
-        WiFi.scanNetworks(true);
+        WiFi.scanNetworks(true, false, true, 250);
    }
 }

@@ -38,6 +38,10 @@ void WiFiScanner::listNetworks(AsyncWebServerRequest * request) {
    } else if (numNetworks == -1) {
        request->send(202); // special code to indicate scan in progress
    } else {
-        scanNetworks(request);
+        auto *     response = new AsyncJsonResponse(false);
+        JsonObject root     = response->getRoot();
+        root["networks"].to<JsonArray>();
+        response->setLength();
+        request->send(response);
    }
 }
@@ -546,11 +546,13 @@ bool AnalogSensor::update(uint8_t gpio, const char * org_name, double offset, do
                if (deleted) {
                    LOG_DEBUG("Removing analog sensor GPIO %02d", gpio);
                    EMSESP::system_.remove_gpio(gpio); // remove from used list only
-                    EMSESP::nvs_.remove(AnalogCustomization.name);
+                    if (EMSESP::nvs_.isKey(AnalogCustomization.name)) {
+                        EMSESP::nvs_.remove(AnalogCustomization.name);
+                    }
                    settings.analogCustomizations.remove(AnalogCustomization);
                } else {
                    // update existing record
-                    if (!strcmp(name, AnalogCustomization.name)) {
+                    if (!strcmp(name, AnalogCustomization.name) && EMSESP::nvs_.isKey(AnalogCustomization.name)) {
                        EMSESP::nvs_.remove(AnalogCustomization.name);
                    }
                    strlcpy(AnalogCustomization.name, name, sizeof(AnalogCustomization.name));
@@ -105,7 +105,7 @@
 {215, DeviceType::THERMOSTAT, "Comfort RF", DeviceFlags::EMS_DEVICE_FLAG_CRF | DeviceFlags::EMS_DEVICE_FLAG_NO_WRITE}, // 0x18
 {216, DeviceType::THERMOSTAT, "CRF200S", DeviceFlags::EMS_DEVICE_FLAG_CRF | DeviceFlags::EMS_DEVICE_FLAG_NO_WRITE}, // 0x18
 {246, DeviceType::THERMOSTAT, "Comfort+2RF", DeviceFlags::EMS_DEVICE_FLAG_CRF | DeviceFlags::EMS_DEVICE_FLAG_NO_WRITE}, // 0x18
-{253, DeviceType::THERMOSTAT, "Rego 3000, UI800, Logamatic BC400", DeviceFlags::EMS_DEVICE_FLAG_BC400}, // 0x10
+{253, DeviceType::THERMOSTAT, "Rego 3000, UI800, Logamatic BC400", DeviceFlags::EMS_DEVICE_FLAG_UI800}, // 0x10

 // Thermostat - Sieger - 0x10 / 0x17
 { 66, DeviceType::THERMOSTAT, "ES72, RC20", DeviceFlags::EMS_DEVICE_FLAG_RC20_N}, // 0x17 or remote
@@ -187,8 +187,9 @@
 { 74, DeviceType::ALERT, "EM10", DeviceFlags::EMS_DEVICE_FLAG_NONE},

 // Gateways - 0x48
-{17, DeviceType::GATEWAY, "MX400", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x48 and 0x4B
-{189, DeviceType::GATEWAY, "KM200, MB LAN 2", DeviceFlags::EMS_DEVICE_FLAG_NONE},
+{17, DeviceType::GATEWAY, "MX400", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x48, 0x4B, or 0x50 as wireless base
+{189, DeviceType::GATEWAY, "KM200, MB LAN 2", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x48
+{222, DeviceType::GATEWAY, "KM300", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x4A
 {252, DeviceType::GATEWAY, "K30RF, MX300", DeviceFlags::EMS_DEVICE_FLAG_NONE},

 // Generic - 0x40 or other with no product-id and no version
@@ -513,6 +513,7 @@ class EMSdevice {
    static constexpr uint8_t EMS_DEVICE_FLAG_CR120       = 16; // mostly like RC300, but some changes
    static constexpr uint8_t EMS_DEVICE_FLAG_CR11        = 17; // CRF200 only monitor
    static constexpr uint8_t EMS_DEVICE_FLAG_HMC310      = 18;
+    static constexpr uint8_t EMS_DEVICE_FLAG_UI800       = 19;

    uint8_t count_entities();
    uint8_t count_entities_fav();
@@ -158,6 +158,7 @@ class DeviceValue {
    enum DeviceValueNumOp : int8_t {
        DV_NUMOP_NONE   = 0, // default
        DV_NUMOP_DIV2   = 2,
+        DV_NUMOP_DIV4   = 4,
        DV_NUMOP_DIV10  = 10,
        DV_NUMOP_DIV60  = 60,
        DV_NUMOP_DIV100 = 100,
@@ -1800,8 +1800,8 @@ void EMSESP::start() {
    LOG_INFO("Library loaded: %d EMS devices, %d device entities, %s", device_library_.size(), EMSESP_TRANSLATION_COUNT, system_.languages_string().c_str());

    webCustomizationService.begin(); // load the customizations
-    webSchedulerService.begin();     // load the scheduler events
    webCustomEntityService.begin();  // load the custom telegram reads
+    webSchedulerService.begin();     // load the scheduler events

    // start telnet service if it's enabled
    // default idle is 10 minutes, default write timeout is 0 (automatic)
@@ -1864,16 +1864,9 @@ void EMSESP::loop() {
    webLogService.loop(); // log in Web UI

    // run the loop, unless we're in the middle of an OTA upload
-    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_NORMAL || EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
-        // check for GPIO Errors - this is called once when booting
-        if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
-            static bool only_once = false;
-            if (!only_once) {
-                LOG_ERROR("Invalid GPIOs used. Please check your settings and the system log");
-                only_once = true;
-            }
-        }
-
+    // if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_NORMAL || EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
+    if (EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_PENDING_UPLOAD
+        && EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_UPLOADING) {
        // loop through the services
        rxservice_.loop();          // process any incoming Rx telegrams
        shower_.loop();             // check for shower on/off
@@ -1887,6 +1880,14 @@ void EMSESP::loop() {
        }
        scheduled_fetch_values(); // force a query on the EMS devices to fetch latest data at a set interval (1 min)
    }
+    // check for GPIO Errors - this is called once when booting
+    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
+        static bool only_once = false;
+        if (!only_once) {
+            LOG_ERROR("Invalid GPIOs used. Please check your settings and the system log");
+            only_once = true;
+        }
+    }

    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_PENDING_UPLOAD) {
        // start an upload from a URL, assuming the URL exists and set from a previous pass
@@ -1899,6 +1900,17 @@ void EMSESP::loop() {
        }
    }

+    // reset status after 5 Minutes
+    if (EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_NORMAL) {
+        static uint32_t starttime = 0;
+        if (starttime == 0) {
+            starttime = uuid::get_uptime_ms();
+        } else if (uuid::get_uptime_ms() - starttime > 300000) {
+            starttime = 0;
+            EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_NORMAL);
+        }
+    }
+
    // telnet service
 #ifndef EMSESP_STANDALONE
    if (system_.telnet_enabled()) {
@@ -817,7 +817,7 @@ std::string Helpers::toUpper(std::string const & s) {

 // capitalizes one UTF-8 character in char array
 // works with Latin1 (1 byte), Polish and other (2 bytes) characters
-// supports special characters for all 11 supported languages: EN, DE, NL, SV, PL, NO, FR, TR, IT, SK, CZ
+// supports special characters for all 11 supported languages: EN, DE, NL, SV, PL, NO, FR, TR, IT, SK, CS
 #if defined(EMSESP_STANDALONE)
 #pragma GCC diagnostic push
 #pragma GCC diagnostic ignored "-Wtype-limits"
@@ -1033,4 +1033,17 @@ float Helpers::numericoperator2scalefactor(int8_t numeric_operator) {
        return -numeric_operator;
 }

+int16_t Helpers::calc_dew(int16_t temp, uint8_t humi) {
+    if (humi == EMS_VALUE_UINT8_NOTSET || temp == EMS_VALUE_INT16_NOTSET) {
+        return EMS_VALUE_INT16_NOTSET;
+    }
+    const float k2 = 17.62;
+    const float k3 = 243.12;
+    const float t  = (float)temp / 10;
+    const float h  = (float)humi / 100;
+    int16_t     dt = (10 * k3 * (((k2 * t) / (k3 + t)) + log(h)) / (((k2 * k3) / (k3 + t)) - log(h)));
+    return dt;
+}
+
+
 } // namespace emsesp
@@ -84,6 +84,7 @@ class Helpers {
    static uint8_t count_items(const char * const * list);

    static const char * translated_word(const char * const * strings, const bool force_en = false);
+    static int16_t      calc_dew(int16_t temp, uint8_t hum);

 #ifdef EMSESP_STANDALONE
    static char * ultostr(char * ptr, uint32_t value, const uint8_t base);
@@ -190,7 +190,11 @@ MAKE_NOTRANSLATION(rc100, "RC100")
 MAKE_NOTRANSLATION(rc100h, "RC100H")
 MAKE_NOTRANSLATION(tc100, "TC100")
 MAKE_NOTRANSLATION(rc120rf, "RC120RF")
-MAKE_NOTRANSLATION(rc220, "RC220/RT800")
+MAKE_NOTRANSLATION(rc220, "RC220")
+MAKE_NOTRANSLATION(rt800, "RT800")
+MAKE_NOTRANSLATION(cr10, "CR10")
+MAKE_NOTRANSLATION(cr10h, "CR10H")
+MAKE_NOTRANSLATION(cr20rf, "CR20RF")
 MAKE_NOTRANSLATION(single, "single")
 MAKE_NOTRANSLATION(dash, "-")
 MAKE_NOTRANSLATION(BLANK, "")
@@ -370,6 +374,7 @@ MAKE_ENUM(enum_roomsensor, FL_(extern), FL_(intern), FL_(auto))
 MAKE_ENUM(enum_roominfluence, FL_(off), FL_(intern), FL_(extern), FL_(auto))
 MAKE_ENUM(enum_control1, FL_(rc310), FL_(rc200), FL_(rc100), FL_(rc100h), FL_(tc100))
 MAKE_ENUM(enum_control2, FL_(off), FL_(dash), FL_(rc100), FL_(rc100h), FL_(dash), FL_(rc120rf), FL_(rc220), FL_(single)) // BC400
+MAKE_ENUM(enum_control3, FL_(off), FL_(dash), FL_(cr10), FL_(cr10h), FL_(dash), FL_(cr20rf), FL_(rt800), FL_(single)) // UI800

 MAKE_ENUM(enum_switchmode, FL_(off), FL_(eco), FL_(comfort), FL_(heat))
 MAKE_ENUM(enum_switchProgMode, FL_(level), FL_(absolute))
@@ -30,9 +30,9 @@
 #define EMSESP_LOCALE_TR "tr"
 #define EMSESP_LOCALE_IT "it"
 #define EMSESP_LOCALE_SK "sk"
-#define EMSESP_LOCALE_CZ "cz"
+#define EMSESP_LOCALE_CS "cs"

-// IMPORTANT! translations are in the order: en, de, nl, sv, pl, no, fr, tr, it, sk, cz
+// IMPORTANT! translations are in the order: en, de, nl, sv, pl, no, fr, tr, it, sk, cs
 //
 // if there is no translation, it will default to en

@@ -367,7 +367,7 @@ MAKE_WORD_TRANSLATION(bookshelf, "mdi:bookshelf", "mdi:bookshelf")
 // MQTT Discovery - this is special device entity for 'climate'
 MAKE_TRANSLATION(haclimate, "haclimate", "mqtt discovery current room temperature", "Discovery aktuelle Raumtemperatur", "Discovery huidige kamertemperatuur", "MQTT Discovery för aktuell rumstemperatur", "termostat w HA", "HA Avlest temp", "découverte mqtt température actuelle", "Güncel osa sıcaklığı", "verifica temperatura ambiente attuale", "mqtt discovery aktuálna teplota v miestnosti", "mqtt discovery aktuální pokojová teplota")

-// Entity translations: tag, mqtt, en, de, nl, sv, pl, no, fr, tr, it, sk, cz
+// Entity translations: tag, mqtt, en, de, nl, sv, pl, no, fr, tr, it, sk, cs
 // Boiler
 MAKE_TRANSLATION(chimneysweeper, "chimneysweeper", "chimney sweeper", "Schornsteinfeger", "schoorsteenveger", "Sotare", "tryb kominiarza", "feier", "ramoneur", "baca temizleyici", "spazzacamino", "kominár", "kominík")
 MAKE_TRANSLATION(reset, "reset", "reset", "Reset", "Reset", "Återställ", "kasowanie komunikatu", "nullstill", "reset", "Sıfırla", "Reset", "reset", "reset")
@@ -300,6 +300,14 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(heatingPID), 74, 1), // heatingpid
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(preheating), 75, 1), // preheating
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(vacations), 76, 13), // vacations
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(hpoperatingmode), 89, 1), // hpoperatingmode
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(summertemp), 90, 1), // summertemp
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(instantstart), 91, 1), // instantstart
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(coolstart), 92, 1), // coolstart
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(heatondelay), 93, 1), // heatondelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(heatoffdelay), 94, 1), // heatoffdelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(coolondelay), 95, 1), // coolondelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(cooloffdelay), 96, 1), // cooloffdelay
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(selRoomTemp), 0, 1), // seltemp
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(roomTemp), 1, 1), // currtemp
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(haclimate), 2, 1), // haclimate
@@ -349,12 +357,12 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(remotehum), 46, 1), // remotehum
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(heatondelay), 47, 1), // heatondelay
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(heatoffdelay), 48, 1), // heatoffdelay
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(instantstart), 49, 1), // instantstart
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boost), 50, 1), // boost
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boosttime), 51, 1), // boosttime
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(coolondelay), 49, 1), // coolondelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(cooloffdelay), 50, 1), // cooloffdelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(instantstart), 51, 1), // instantstart
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(coolstart), 52, 1), // coolstart
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(coolondelay), 53, 1), // coolondelay
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(cooloffdelay), 54, 1), // cooloffdelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boost), 53, 1), // boost
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boosttime), 54, 1), // boosttime
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(switchProgMode), 55, 1), // switchprogmode
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(redthreshold), 56, 1), // redthreshold
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(solarinfl), 57, 1), // solarinfl
@@ -629,20 +637,6 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwDiffTemp), 13, 1), // difftemp
    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwRedTemp), 14, 1), // redtemp
    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwRequiredTemp), 15, 1), // requiredtemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwStorageTemp1), 16, 1), // storagetemp1
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwColdTemp), 17, 1), // coldtemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwTemp5), 18, 1), // temp5
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(retTemp), 19, 1), // rettemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwHotTemp), 20, 1), // hottemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwDailyTemp), 21, 1), // dailytemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwCircTc), 22, 1), // circtc
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwKeepWarm), 23, 1), // keepwarm
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwStatus2), 24, 1), // status2
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwPumpMod), 25, 1), // pumpmod
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwFlow), 26, 1), // flow
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(valveReturn), 27, 1), // valvereturn
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(deltaTRet), 28, 1), // deltatret
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(errorDisp), 29, 1), // errordisp
 };

 } // namespace emsesp
@@ -377,19 +377,23 @@ void Roomctrl::temperature(uint8_t addr, uint8_t dst, uint8_t hc) {

 // send telegram 0x047B only for RC100H
 void Roomctrl::humidity(uint8_t addr, uint8_t dst, uint8_t hc) {
+    int16_t dew  = Helpers::calc_dew(remotetemp_[hc], remotehum_[hc]);
+    int8_t  dew8 = EMS_VALUE_INT8_NOTSET;
+    if (dew != EMS_VALUE_INT16_NOTSET) {
+        dew8 = static_cast<int8_t>((dew >= 0 ? dew + 5 : dew - 5) / 10);
+    }
    uint8_t data[11];
-    data[0]      = addr | EMSbus::ems_mask();
-    data[1]      = dst & 0x7F;
-    uint16_t dew = calc_dew(remotetemp_[hc], remotehum_[hc]);
-    data[2]      = 0xFF;
-    data[3]      = 0;
-    data[4]      = 3;
-    data[5]      = 0x7B + hc;
-    data[6]      = dew == EMS_VALUE_INT16_NOTSET ? EMS_VALUE_INT8_NOTSET : (uint8_t)((dew + 5) / 10);
-    data[7]      = remotehum_[hc];
-    data[8]      = (uint8_t)(dew << 8);
-    data[9]      = (uint8_t)(dew & 0xFF);
-    data[10]     = EMSbus::calculate_crc(data, 10); // append CRC
+    data[0]  = addr | EMSbus::ems_mask();
+    data[1]  = dst & 0x7F;
+    data[2]  = 0xFF;
+    data[3]  = 0;
+    data[4]  = 3;
+    data[5]  = 0x7B + hc;
+    data[6]  = static_cast<uint8_t>(dew8);
+    data[7]  = remotehum_[hc];
+    data[8]  = static_cast<uint8_t>(dew >> 8);
+    data[9]  = static_cast<uint8_t>(dew & 0x00FF);
+    data[10] = EMSbus::calculate_crc(data, 10); // append CRC
    EMSuart::transmit(data, 11);
 }

@@ -436,17 +440,4 @@ void Roomctrl::replyF7(uint8_t addr, uint8_t dst, uint8_t offset, uint8_t typehh
    EMSuart::transmit(data, 10);
 }

-int16_t Roomctrl::calc_dew(int16_t temp, uint8_t humi) {
-    if (humi == EMS_VALUE_UINT8_NOTSET || temp == EMS_VALUE_INT16_NOTSET) {
-        return EMS_VALUE_INT16_NOTSET;
-    }
-    const float k2 = 17.62;
-    const float k3 = 243.12;
-    const float t  = (float)temp / 10;
-    const float h  = (float)humi / 100;
-    int16_t     dt = (10 * k3 * (((k2 * t) / (k3 + t)) + log(h)) / (((k2 * k3) / (k3 + t)) - log(h)));
-    return dt;
-}
-
-
 } // namespace emsesp
@@ -50,7 +50,6 @@ class Roomctrl {
    static void    nack_write();
    static void    ack_write();
    static void    replyF7(uint8_t addr, uint8_t dst, uint8_t offset, uint8_t typehh, uint8_t typeh, uint8_t typel, uint8_t hc);
-    static int16_t calc_dew(int16_t temp, uint8_t hum);

    static bool     switch_off_[HCS];
    static uint32_t send_time_[HCS];
@@ -39,17 +39,8 @@ std::deque<Token> exprToTokens(const std::string & expr) {
                i += (*p == '{') ? 1 : (*p == '}') ? -1 : 0;
                ++p;
            }
-            if (*p) {
-                ++p;
-            }
-            // Use string_view to avoid unnecessary string copies
-            std::string_view s(b, p - b);
-            auto             n = s.find("\"\"");
-            while (n != std::string_view::npos) {
-                s.remove_prefix(n + 2);
-                n = s.find("\"\"");
-            }
-            tokens.emplace_back(Token::Type::String, std::string(s), -3);
+            const auto s = std::string(b, p);
+            tokens.emplace_back(Token::Type::String, s, -3);
            if (*p == '\0') {
                --p;
            }
@@ -333,7 +324,10 @@ std::deque<Token> shuntingYard(const std::deque<Token> & tokens) {

 // check if string is a number
 bool isnum(const std::string & s) {
-    if (!s.empty() && (s.find_first_not_of("0123456789.") == std::string::npos || (s[0] == '-' && s.find_first_not_of("0123456789.", 1) == std::string::npos))) {
+    if (s.empty() || s.find_first_of("0123456789") == std::string::npos) {
+        return false;
+    }
+    if (s.find_first_not_of("0123456789.") == std::string::npos || (s[0] == '-' && s.find_first_not_of("0123456789.", 1) == std::string::npos)) {
        return true;
    }
    return false;
@@ -636,6 +630,10 @@ std::string calculate(const std::string & expr) {
                stack.push_back(lhs + rhs);
                break;
            }
+            if (!isnum(rhs) || !isnum(lhs)) {
+                stack.push_back(lhs + token.str + rhs);
+                break;
+            }
            auto lhd = std::stod(lhs);
            auto rhd = std::stod(rhs);
            switch (token.str[0]) {
@@ -700,8 +698,7 @@ std::string compute(const std::string & expr) {
        std::string  cmd = expr_new.substr(f, e - f).c_str();
        JsonDocument doc;
        if (DeserializationError::Ok == deserializeJson(doc, cmd)) {
-            HTTPClient * http = new HTTPClient;
-            std::string  url, header_s, value_s, method_s, key_s, keys_s;
+            std::string url, header_s, value_s, method_s, key_s, keys_s;
            // search keys lower case
            for (JsonPair p : doc.as<JsonObject>()) {
                if (Helpers::toLower(p.key().c_str()) == "url") {
@@ -720,56 +717,63 @@ std::string compute(const std::string & expr) {
                    keys_s = p.key().c_str();
                }
            }
-            if (http->begin(url.c_str())) {
-                int httpResult = 0;
-                for (JsonPair p : doc[header_s].as<JsonObject>()) {
-                    http->addHeader(p.key().c_str(), p.value().as<std::string>().c_str());
-                }
-                std::string value  = doc[value_s] | "";
-                std::string method = doc[method_s] | "get";
-
-                // if there is data, force a POST
-                if (value.length() || Helpers::toLower(method) == "post") {
-                    if (value.find_first_of('{') != std::string::npos) {
-                        http->addHeader(asyncsrv::T_Content_Type, asyncsrv::T_application_json, false); // auto-set to JSON
+            if (url.substr(0, 4) == "http") { // match http and https
+                HTTPClient * http = new HTTPClient;
+#ifndef EMSESP_STANDALONE
+                http->setConnectTimeout(10000);
+                http->setTimeout(10000);
+#endif
+                if (http->begin(url.c_str())) {
+                    int httpResult = 0;
+                    for (JsonPair p : doc[header_s].as<JsonObject>()) {
+                        http->addHeader(p.key().c_str(), p.value().as<std::string>().c_str());
                    }
-                    httpResult = http->POST(value.c_str());
-                } else {
-                    httpResult = http->GET(); // normal GET
-                }
+                    std::string value  = doc[value_s] | "";
+                    std::string method = doc[method_s] | "get";

-                if (httpResult > 0) {
-                    std::string  result = http->getString().c_str();
-                    std::string  key    = doc[key_s] | "";
-                    JsonDocument keys_doc; // JsonDocument to hold "keys" after doc is parsed with HTTP body
-                    if (doc[keys_s].is<JsonArray>()) {
-                        keys_doc.set(doc[keys_s].as<JsonArray>());
+                    // if there is data, force a POST
+                    if (value.length() || Helpers::toLower(method) == "post") {
+                        if (value.find_first_of('{') != std::string::npos) {
+                            http->addHeader(asyncsrv::T_Content_Type, asyncsrv::T_application_json, false); // auto-set to JSON
+                        }
+                        httpResult = http->POST(value.c_str());
+                    } else {
+                        httpResult = http->GET(); // normal GET
                    }
-                    JsonArray keys = keys_doc.as<JsonArray>();

-                    if (key.length() || !keys.isNull()) {
-                        doc.clear();
-                        if (DeserializationError::Ok == deserializeJson(doc, result)) {
-                            if (key.length()) {
-                                result = doc[key.c_str()].as<std::string>();
-                            } else {
-                                JsonVariant json = doc.as<JsonVariant>();
-                                for (JsonVariant keys_key : keys) {
-                                    if (keys_key.is<std::string>() && json.is<JsonObject>()) {
-                                        json = json[keys_key.as<std::string>()].as<JsonVariant>();
-                                    } else if (keys_key.is<int>() && json.is<JsonArray>()) {
-                                        json = json[keys_key.as<int>()].as<JsonVariant>();
-                                    } else {
-                                        break; // type mismatch
+                    if (httpResult > 0) {
+                        std::string  result = http->getString().c_str();
+                        std::string  key    = doc[key_s] | "";
+                        JsonDocument keys_doc; // JsonDocument to hold "keys" after doc is parsed with HTTP body
+                        if (doc[keys_s].is<JsonArray>()) {
+                            keys_doc.set(doc[keys_s].as<JsonArray>());
+                        }
+                        JsonArray keys = keys_doc.as<JsonArray>();
+
+                        if (key.length() || !keys.isNull()) {
+                            doc.clear();
+                            if (DeserializationError::Ok == deserializeJson(doc, result)) {
+                                if (key.length()) {
+                                    result = doc[key.c_str()].as<std::string>();
+                                } else {
+                                    JsonVariant json = doc.as<JsonVariant>();
+                                    for (JsonVariant keys_key : keys) {
+                                        if (keys_key.is<std::string>() && json.is<JsonObject>()) {
+                                            json = json[keys_key.as<std::string>()].as<JsonVariant>();
+                                        } else if (keys_key.is<int>() && json.is<JsonArray>()) {
+                                            json = json[keys_key.as<int>()].as<JsonVariant>();
+                                        } else {
+                                            break; // type mismatch
+                                        }
                                    }
+                                    result = json.as<std::string>();
                                }
-                                result = json.as<std::string>();
                            }
                        }
+                        expr_new.replace(f, e - f, result.c_str());
                    }
-                    expr_new.replace(f, e - f, result.c_str());
+                    http->end();
                }
-                http->end();
                delete http;
            }
        }
@@ -821,4 +825,4 @@ std::string compute(const std::string & expr) {
    return calculate(expr_new);
 }

-} // namespace emsesp
+} // namespace emsesp
@@ -30,7 +30,7 @@

 #include <HTTPClient.h>
 #include <map>
-
+#include "shuntingYard.h" // for compute() used by the message
 #include "EMSESP_Version.h"

 #if defined(EMSESP_TEST)
@@ -61,7 +61,7 @@ const char * const languages[] = {EMSESP_LOCALE_EN,
                                  EMSESP_LOCALE_TR,
                                  EMSESP_LOCALE_IT,
                                  EMSESP_LOCALE_SK,
-                                  EMSESP_LOCALE_CZ};
+                                  EMSESP_LOCALE_CS};
 #endif

 static constexpr uint8_t NUM_LANGUAGES = sizeof(languages) / sizeof(const char *);
@@ -222,22 +222,10 @@ bool System::command_message(const char * value, const int8_t id, JsonObject out
        LOG_WARNING("Message is empty");
        return false; // must have a string value
    }
-
-    EMSESP::webSchedulerService.computed_value.clear();
-    EMSESP::webSchedulerService.raw_value = value;
-    for (uint16_t wait = 0; wait < 2000 && !EMSESP::webSchedulerService.raw_value.empty(); wait++) {
-        delay(1);
-    }
-
-    if (EMSESP::webSchedulerService.computed_value.empty()) {
-        LOG_WARNING("Message result is empty");
-        return false;
-    }
-
-    LOG_INFO("Message: %s", EMSESP::webSchedulerService.computed_value.c_str());  // send to log
-    Mqtt::queue_publish(F_(message), EMSESP::webSchedulerService.computed_value); // send to MQTT if enabled
-    output["api_data"] = EMSESP::webSchedulerService.computed_value;              // send to API
-
+    std::string computed_value = compute(value);
+    LOG_INFO("Message: %s", computed_value.c_str());  // send to log
+    Mqtt::queue_publish(F_(message), computed_value); // send to MQTT if enabled
+    output["api_data"] = computed_value;              // send to API
    return true;
 }

@@ -1964,7 +1952,9 @@ bool System::get_value_info(JsonObject output, const char * cmd) {
        LOG_ERROR("empty system command");
        return false;
    }
-
+    if (!strcmp(cmd, "restart")) { // restart is a command, not an entity
+        return false;
+    }
    // check for hardcoded "info"/"value"
    if (!strcmp(cmd, F_(info)) || !strcmp(cmd, F_(values))) {
        return command_info("", 0, output);
@@ -3034,18 +3024,24 @@ bool System::uploadFirmwareURL(const char * url) {
        return false; // error
    }

+    // the Content-Length from the response header, -1 if the server didn't send one.
    int firmware_size = http.getSize();
+    if (firmware_size <= 0) {
+        LOG_ERROR("Firmware upload failed - unknown size");
+        http.end();
+        return false; // error
+    }

-    // check we have a valid size
-    if (firmware_size < 2097152) { // 2MB or greater is required
-        LOG_ERROR("Firmware upload failed - invalid size");
+    // catch a wrong URL early, before streaming. Smallest shipped image is ~1.9MB
+    if (firmware_size < 1677721) { // 1.6MB
+        LOG_ERROR("Firmware upload failed - too small (%d KB)", firmware_size / 1024);
        http.end();
        return false; // error
    }

    // check we have enough space for the upload in the ota partition
    if (!Update.begin(firmware_size)) {
-        LOG_ERROR("Firmware upload failed - no space");
+        LOG_ERROR("Firmware upload failed - %s", Update.errorString());
        http.end();
        return false; // error
    }
@@ -3062,7 +3058,7 @@ bool System::uploadFirmwareURL(const char * url) {

    // get tcp stream and send it to Updater
    WiFiClient * stream = http.getStreamPtr();
-    if (Update.writeStream(*stream) != firmware_size) {
+    if (Update.writeStream(*stream) != (size_t)firmware_size) {
        LOG_ERROR("Firmware upload failed - size differences");
        http.end();
        EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_ERROR_UPLOAD);
@@ -161,9 +161,9 @@ void RxService::add(uint8_t * data, uint8_t length) {
        }
        if (data[0] != EMSuart::last_tx_src()) { // do not count echos as errors
            telegram_error_count_++;
-            LOG_WARNING("Incomplete Rx: %s", Helpers::data_to_hex(data, length).c_str()); // include CRC
+            LOG_WARNING("Incomplete Rx: %s (crc: %02X)", Helpers::data_to_hex(data, length).c_str(), crc); // include CRC
        } else {
-            LOG_TRACE("Incomplete Rx: %s", Helpers::data_to_hex(data, length).c_str()); // include CRC
+            LOG_TRACE("Incomplete Rx: %s (crc: %02X)", Helpers::data_to_hex(data, length).c_str(), crc); // include CRC
        }
        return;
    }
@@ -276,6 +276,7 @@ void TxService::start() {
 // sends a 1 byte poll which is our own deviceID
 void TxService::send_poll() const {
    // LOG_DEBUG("Ack %02X",ems_bus_id() ^ ems_mask());
+    // if (tx_mode() != EMS_TXMODE_OFF && ems_bus_id() != 0x0D) { // use 0x0D for tests without poll-Ack
    if (tx_mode() != EMS_TXMODE_OFF) {
        EMSuart::send_poll(ems_bus_id() ^ ems_mask());
    }
@@ -572,12 +573,11 @@ bool TxService::send_raw(const char * telegram_data) {
        return false;
    }

-    // since the telegram data is a const, make a copy. add 1 to grab the \0 EOS
-    char telegram[strlen(telegram_data) + 1];
-    strlcpy(telegram, telegram_data, sizeof(telegram));
+    // since the telegram data is a const, make a copy
+    char * telegram = strdup(telegram_data);

    uint8_t count = 0;
-    uint8_t data[2 + strlen(telegram) / 3];
+    uint8_t data[256]; // max raw telegram length

    // get values
    char * p = strtok(telegram, " ,"); // delimiter
@@ -585,7 +585,7 @@ bool TxService::send_raw(const char * telegram_data) {
        data[count++] = (uint8_t)strtol(p, 0, 16);
        p             = strtok(nullptr, " ,");
    }
-
+    free(telegram);
    // check valid length
    if (count < 4) {
        return false;
@@ -45,7 +45,8 @@ Connect::Connect(uint8_t device_type, uint8_t device_id, uint8_t product_id, con
        register_telegram_type(0x1230 + i, "Roomparams", false, MAKE_PF_CB(process_roomThermostatParam));         // fetch for active circuits
        register_telegram_type(0x1244 + i, "Roomdata", false, MAKE_PF_CB(process_roomThermostatData));            // broadcasted
    }
-    register_telegram_type(0xDB65, "Roomschedule", true, MAKE_PF_CB(process_roomSchedule));
+    register_telegram_type(0x0B65, "Roomschedule", true, MAKE_PF_CB(process_roomSchedule));
+    register_telegram_type(0xF7, "MenuConfig", false, MAKE_PF_CB(process_roomConfig));
    // 0x2040, broadcast 36 bytes:
    // data: 0E 60 00 DF 0D AF 0A 46 0A 46 02 9A 1C 53 1C 53 12 AD 12 AD 00 00 13 C2
    // data: 1F 37 1F 37 00 00 00 00 18 97 11 27 (offset 24)
@@ -88,11 +89,12 @@ void Connect::process_RCTime(std::shared_ptr<const Telegram> telegram) {
 void Connect::register_device_values_room(std::shared_ptr<Connect::RoomCircuit> room) {
    auto tag = DeviceValueTAG::TAG_SRC1 + room->room();
    register_device_value(tag, &room->temp_, DeviceValueType::INT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(roomTemp), DeviceValueUOM::DEGREES);
-    register_device_value(tag, &room->humidity_, DeviceValueType::INT8, FL_(airHumidity), DeviceValueUOM::PERCENT);
+    register_device_value(tag, &room->humidity_, DeviceValueType::UINT8, FL_(airHumidity), DeviceValueUOM::PERCENT);
    register_device_value(tag, &room->dewtemp_, DeviceValueType::INT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(dewTemperature), DeviceValueUOM::DEGREES);
    register_device_value(
        tag, &room->seltemp_, DeviceValueType::UINT8, DeviceValueNumOp::DV_NUMOP_DIV2, FL_(selRoomTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_seltemp), 5, 30);
    register_device_value(tag, &room->mode_, DeviceValueType::ENUM, FL_(enum_mode2), FL_(mode), DeviceValueUOM::NONE, MAKE_CF_CB(set_mode));
+    // register_device_value(tag, &room->coolmode_, DeviceValueType::BOOL, FL_(coolingOn), DeviceValueUOM::NONE, MAKE_CF_CB(set_coolmode));
    register_device_value(tag, &room->name_, DeviceValueType::STRING, FL_(name), DeviceValueUOM::NONE, MAKE_CF_CB(set_name));
    register_device_value(tag, &room->childlock_, DeviceValueType::BOOL, FL_(childlock), DeviceValueUOM::NONE, MAKE_CF_CB(set_childlock));
    register_device_value(tag, &room->icon_, DeviceValueType::ENUM, FL_(enum_icons), FL_(icon), DeviceValueUOM::NONE, MAKE_CF_CB(set_icon));
@@ -133,16 +135,8 @@ void Connect::process_roomThermostat(std::shared_ptr<const Telegram> telegram) {
    if (!Mqtt::ha_enabled() || (Helpers::hasValue(rc->mode_) && Helpers::hasValue(rc->icon_))) {
        has_update(telegram, rc->seltemp_, 3);
    }
-
    // calculate dew temperature
-    if (rc->humidity_ >= 0 && rc->humidity_ <= 100) {
-        const float k2 = 17.62;
-        const float k3 = 243.12;
-        const float t  = (float)rc->temp_ / 10;
-        const float h  = (float)rc->humidity_ / 100;
-        int16_t     dt = (10 * k3 * (((k2 * t) / (k3 + t)) + log(h)) / (((k2 * k3) / (k3 + t)) - log(h)));
-        has_update(rc->dewtemp_, dt);
-    }
+    has_update(rc->dewtemp_, Helpers::calc_dew(rc->temp_, rc->humidity_));
 }

 // gateway(0x48) W gateway(0x50), ?(0x0B42), data: 01 // icon in offset 0
@@ -168,11 +162,33 @@ void Connect::process_roomThermostatSettings(std::shared_ptr<const Telegram> tel
    if (rc == nullptr) {
        return;
    }
-    has_enumupdate(telegram, rc->mode_, 0, {3, 1, 0}); // modes off, manual auto
+    // has_enumupdate(telegram, rc->mode_, 0, {3, 1, 0}); // modes off, manual auto
    // has_update(telegram, rc->mode_, 0); // modes: auto, heat, cool, off
    // has_update(telegram, rc->tempautotemp_, 1); // FF means off
    // has_update(telegram, rc->manualtemp_, 3);
+    // has_update(telegram, rc->coolmode_, 4); // 01-cooling, 00-heating
+    // has_update(telegram, rc->coolautotemp_, 5);
+    // has_update(telegram, rc->cooltemp_, 6);
    has_update(telegram, rc->childlock_, 7);
+    uint8_t mh = 0xFF;
+    uint8_t mc = 0xFF;
+    telegram->read_value(mh, 0);
+    telegram->read_value(mc, 4);
+    if (mc == 3) {
+        rc->coolmode_ = 1;
+        rc->mode_     = 0;
+    } else if (mh == 3) {
+        rc->coolmode_ = 0;
+        rc->mode_     = 0;
+    } else if (mc == 1) {
+        rc->coolmode_ = 1;
+        rc->mode_     = 1;
+    } else if (mh == 1) {
+        rc->coolmode_ = 0;
+        rc->mode_     = 1;
+    } else {
+        rc->mode_ = 2;
+    }
 }

 // unknown telegrams, needs fetch
@@ -203,6 +219,53 @@ void Connect::process_roomSchedule(std::shared_ptr<const Telegram> telegram) {
    toggle_fetch(telegram->type_id, false); // fetch only once if all is initialized
 }

+void Connect::process_roomConfig(std::shared_ptr<const Telegram> telegram) {
+    if (telegram->offset == 0 && telegram->message_length > 3) {
+        uint16_t t = 0;
+        telegram->read_value(t, 1);
+        if (t >= 0x0AB5 && t <= 0x0AB5 + 15) {
+            auto rc = room_circuit(t - 0x0AB5);
+            if (rc == nullptr) {
+                return;
+            }
+            uint8_t bits = telegram->message_data[3];
+            if (rc->mode_ == 2) {
+                if (bits & 0x02) {
+                    rc->coolmode_ = 0;
+                } else if (bits & 0x20) {
+                    rc->coolmode_ = 1;
+                }
+            }
+            /*
+            switch (bits & 0x6A) {
+            case 0: // cooling off
+                rc->mode_     = 0;
+                rc->coolmode_ = 1;
+                break;
+            case 0x40: // manual cooling or heating off
+                rc->mode_     = 1;
+                rc->coolmode_ = 1;
+                break;
+            case 0x20: // auto cooling
+                rc->mode_     = 2;
+                rc->coolmode_ = 1;
+                break;
+            case 0x48: // manual heating
+            case 0x08: // manual heating
+                rc->mode_     = 1;
+                rc->coolmode_ = 0;
+                break;
+            case 0x42: // auto heating
+            case 0x02: // auto heating
+                rc->mode_     = 2;
+                rc->coolmode_ = 0;
+                break;
+            }
+            */
+        }
+    }
+}
+
 // Settings:

 bool Connect::set_mode(const char * value, const int8_t id) {
@@ -216,7 +279,7 @@ bool Connect::set_mode(const char * value, const int8_t id) {
            return false;
        }
    }
-    write_command(0xBB5 + rc->room(), 0, v); // no validate, mode change is broadcasted
+    write_command(0xBB5 + rc->room(), rc->coolmode_ == 1 ? 4 : 0, v); // no validate, mode change is broadcasted
    return true;
 }

@@ -226,10 +289,13 @@ bool Connect::set_seltemp(const char * value, const int8_t id) {
        return false;
    }
    float v;
-    if (Helpers::value2float(value, v)) {
+    if (Helpers::value2temperature(value, v)) {
        // depends on mode, auto (2 for enum_mode2, 0 for enum_mode8) set in offset 1
-        write_command(0xBB5 + rc->room(), rc->mode_ == 2 ? 1 : 3, v == -1 ? 0xFF : uint8_t(v * 2));
-        // write_command(0xBB5 + rc->room(), rc->mode_ == 0 ? 1 : 3, v == -1 ? 0xFF : uint8_t(v * 2));
+        if (rc->coolmode_ == 1) {
+            write_command(0xBB5 + rc->room(), rc->mode_ == 2 ? 5 : 6, v == -1 ? 0xFF : uint8_t(v * 2));
+        } else {
+            write_command(0xBB5 + rc->room(), rc->mode_ == 2 ? 1 : 3, v == -1 ? 0xFF : uint8_t(v * 2));
+        }
        return true;
    }
    return false;
@@ -257,6 +323,19 @@ bool Connect::set_name(const char * value, const int8_t id) {
    return true;
 }

+bool Connect::set_coolmode(const char * value, const int8_t id) {
+    auto rc = room_circuit(id - DeviceValueTAG::TAG_SRC1);
+    if (rc == nullptr) {
+        return false;
+    }
+    bool b;
+    if (Helpers::value2bool(value, b)) {
+        write_command(0xBB5 + rc->room(), 4, b ? 1 : 0, 0xBB5 + rc->room());
+        return true;
+    }
+    return false;
+}
+
 bool Connect::set_childlock(const char * value, const int8_t id) {
    auto rc = room_circuit(id - DeviceValueTAG::TAG_SRC1);
    if (rc == nullptr) {
@@ -34,15 +34,18 @@ class Connect : public EMSdevice {
        }
        ~RoomCircuit() = default;
        int16_t temp_;
-        int8_t  humidity_;
+        uint8_t humidity_;
        uint8_t seltemp_;
        uint8_t mode_;
        char    name_[51];
        int16_t dewtemp_;
        uint8_t childlock_;
        uint8_t icon_;
+        uint8_t coolmode_;
        // uint8_t tempautotemp_;
        // uint8_t manualtemp_;
+        // uint8_t coolautotemp_;
+        // uint8_t cooltemp_;

        uint8_t room() {
            return room_;
@@ -62,9 +65,11 @@ class Connect : public EMSdevice {
    void process_roomThermostatParam(std::shared_ptr<const Telegram> telegram);
    void process_roomThermostatData(std::shared_ptr<const Telegram> telegram);
    void process_roomSchedule(std::shared_ptr<const Telegram> telegram);
+    void process_roomConfig(std::shared_ptr<const Telegram> telegram);
    bool set_mode(const char * value, const int8_t id);
    bool set_seltemp(const char * value, const int8_t id);
    bool set_name(const char * value, const int8_t id);
+    bool set_coolmode(const char * value, const int8_t id);
    bool set_childlock(const char * value, const int8_t id);
    bool set_icon(const char * value, const int8_t id);

@@ -175,7 +175,9 @@ Thermostat::Thermostat(uint8_t device_type, uint8_t device_id, uint8_t product_i
            register_telegram_type(set_typeids[i], "RC300Set", false, MAKE_PF_CB(process_RC300Set), 29);
            register_telegram_type(summer_typeids[i], "RC300Summer", false, MAKE_PF_CB(process_RC300Summer), 14);
            register_telegram_type(curve_typeids[i], "RC300Curves", false, MAKE_PF_CB(process_RC300Curve), 9);
-            register_telegram_type(summer2_typeids[i], "RC300Summer2", false, MAKE_PF_CB(process_RC300Summer2), 8);
+            if (model != EMSdevice::EMS_DEVICE_FLAG_UI800) {
+                register_telegram_type(summer2_typeids[i], "RC300Sumr2", false, MAKE_PF_CB(process_RC300Summer2), 8);
+            }
        }
        const size_t set2_size = set2_typeids.size();
        for (uint8_t i = 0; i < set2_size; i++) {
@@ -207,7 +209,9 @@ Thermostat::Thermostat(uint8_t device_type, uint8_t device_id, uint8_t product_i
        register_telegram_type(0x16E, "Absent", true, MAKE_PF_CB(process_Absent), 1);
        register_telegram_type(0xBF, "ErrorMessage", false, MAKE_PF_CB(process_ErrorMessageBF));
        register_telegram_type(0xC0, "RCErrorMessage", false, MAKE_PF_CB(process_RCErrorMessage2));
-        register_telegram_type(0x470, "RC300Summer2", true, MAKE_PF_CB(process_RC300Summer2), 8);
+        if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_telegram_type(0x470, "RC300Summer3", true, MAKE_PF_CB(process_RC300Summer3), 8);
+        }
        EMSESP::send_read_request(0xC0, device_id, 0, 20); // read last errorcode on start (only published on errors)

        // JUNKERS/HT3
@@ -543,7 +547,7 @@ uint8_t Thermostat::HeatingCircuit::get_mode() const {
        } else {
            return HeatingCircuit::Mode::OFF;
        }
-    } else if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
+    } else if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_UI800 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
        if (mode_new == 0) {
            return HeatingCircuit::Mode::OFF;
        } else if (mode_new == 1) {
@@ -607,7 +611,7 @@ uint8_t Thermostat::HeatingCircuit::get_mode_type() const {
            return HeatingCircuit::Mode::ON;
        }
    } else if (model == EMSdevice::EMS_DEVICE_FLAG_RC300 || model == EMSdevice::EMS_DEVICE_FLAG_R3000 || model == EMSdevice::EMS_DEVICE_FLAG_BC400
-               || model == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+               || model == EMSdevice::EMS_DEVICE_FLAG_UI800 || model == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
        if (modetype == 0) {
            return HeatingCircuit::Mode::ECO;
        } else if (modetype == 1) {
@@ -806,16 +810,16 @@ void Thermostat::process_RemoteTemp(std::shared_ptr<const Telegram> telegram) {
 // e.g. "38 10 FF 00 03 7B 08 24 00 4B"
 void Thermostat::process_RemoteHumidity(std::shared_ptr<const Telegram> telegram) {
    // has_update(telegram, dewtemperature_, 0); // this is int8
-    has_update(telegram, humidity_, 1);
-    has_update(telegram, dewtemperature_, 2); // this is int16
    // some thermostats use short telegram with int8 dewpoint, https://github.com/emsesp/EMS-ESP32/issues/1491
-    if (telegram->offset == 0 && telegram->message_length < 4) {
-        int8_t dew = dewtemperature_ / 10;
-        telegram->read_value(dew, 0);
-        if (dew != EMS_VALUE_INT8_NOTSET && dewtemperature_ != dew * 10) {
-            dewtemperature_ = dew * 10;
-            has_update(dewtemperature_);
-        }
+    // but it's not a dewpoint in offset 0, removed, see https://github.com/emsesp/EMS-ESP32/issues/3135
+    has_update(telegram, humidity_, 1);
+    // has_update(telegram, dewtemperature_, 2); // this is int16
+    int16_t dew = EMS_VALUE_INT16_NOTSET;
+    if (telegram->read_value(dew, 2)) {
+        has_update(dewtemperature_, dew);
+    } else if (telegram->offset == 0 && telegram->message_length < 4) {
+        dew = Helpers::calc_dew(tempsensor1_, humidity_);
+        has_update(dewtemperature_, dew);
    }
 }

@@ -1264,18 +1268,25 @@ void Thermostat::process_RC300Summer(std::shared_ptr<const Telegram> telegram) {
    has_update(telegram, hc->comfortPointTemp, 12);
 }

+// type 0x470, only BC400/UI800
+// (0x470), data: 01 0E 01 01 02 17 04 48
+void Thermostat::process_RC300Summer3(std::shared_ptr<const Telegram> telegram) {
+    has_update(telegram, hpoperatingmode, 0);
+    has_update(telegram, summertemp, 1);
+    has_update(telegram, heatondelay, 2);
+    has_update(telegram, heatoffdelay, 3);
+    has_update(telegram, instantstart, 4);
+    has_update(telegram, coolstart, 5);
+    has_update(telegram, coolondelay, 6);
+    has_update(telegram, cooloffdelay, 7);
+}
+
 // types 0x471 ff summer2_typeids
 // (0x473), data: 00 11 04 01 01 1C 08 04
 void Thermostat::process_RC300Summer2(std::shared_ptr<const Telegram> telegram) {
    auto hc = heating_circuit(telegram);
    if (hc == nullptr) {
-        // telegram 0x470 see https://github.com/emsesp/EMS-ESP32/issues/2686
-        if (telegram->type_id == 0x470 && telegram->message_length > 2) {
-            hc                 = heating_circuit(1);
-            summer2_typeids[0] = 0x470;
-        } else {
-            return;
-        }
+        return;
    }
    if (hc->statusbyte & 1) {
        has_update(telegram, hc->summersetmode, 0);
@@ -1334,7 +1345,7 @@ void Thermostat::process_RC300WWmode(std::shared_ptr<const Telegram> telegram) {
    // circulation pump see: https://github.com/Th3M3/buderus_ems-wiki/blob/master/Einstellungen%20der%20Bedieneinheit%20RC310.md
    has_update(telegram, dhw->wwCircPump_, 1); // FF=off, 0=on ?

-    if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
        has_enumupdate(telegram, dhw->wwMode_, 2, {0, 5, 1, 2, 4});
    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_R3000) {
        // https://github.com/emsesp/EMS-ESP32/pull/1722#discussion_r1582823521
@@ -1455,14 +1466,21 @@ void Thermostat::process_HPMode(std::shared_ptr<const Telegram> telegram) {
 }

 // 0x467 ff HP settings
+// thermostat(0x10) -W-> Me(0x0B), ?(0x0467), data: 0A 15 00 01 04 (from #1187)
+// thermostat(0x10) W me(0x0B), HPSet(0x0467), data: 14 13 02 01 02 (from #3144)
 void Thermostat::process_HPSet(std::shared_ptr<const Telegram> telegram) {
    auto hc = heating_circuit(telegram);
    if (hc == nullptr) {
        return;
    }
-    has_update(telegram, hc->dewoffset, 4);     // 7-35°C
-    has_update(telegram, hc->roomtempdiff, 3);  // 1-10K
-    has_update(telegram, hc->hpminflowtemp, 0); // 2-10K
+    if (hc->control == 3 || hc->control == 6) {     // control with humidity
+        has_update(telegram, hc->hpminflowtemp, 0); // 7-35°C
+    } else {
+        has_update(telegram, hc->hpminflowtemp, 1); // 7-35°C
+    }
+    // has_update(telegram, hc->roomtempoffset, 2); // 1-10K // not implemented, mentioned in #3144
+    has_update(telegram, hc->roomtempdiff, 3); // 1-10K
+    has_update(telegram, hc->dewoffset, 4);    // 2-10K
 }

 // type 0x41 - data from the RC30 thermostat(0x10) - 14 bytes long
@@ -1720,9 +1738,18 @@ void Thermostat::process_RCTime(std::shared_ptr<const Telegram> telegram) {
    }

    // check clock
-    time_t now   = time(nullptr);
-    tm *   tm_   = localtime(&now);
-    bool   tset_ = tm_->tm_year > 110;                       // year 2010 and up, time is valid
+    time_t now  = time(nullptr);
+    bool   sync = false;
+    // change to thermostat timezone if different
+    EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+        sync = settings.thermostat_sync != 0;
+        if (settings.thermostat_sync == 2) {
+            setenv("TZ", settings.tzFormatT.c_str(), 1);
+            tzset();
+        }
+    });
+    tm * tm_     = localtime(&now);
+    bool tset_   = tm_->tm_year > 110;                       // year 2010 and up, time is valid
    tm_->tm_year = (telegram->message_data[0] & 0x7F) + 100; // IVT
    tm_->tm_mon  = telegram->message_data[1] - 1;
    tm_->tm_mday = telegram->message_data[3];
@@ -1738,20 +1765,27 @@ void Thermostat::process_RCTime(std::shared_ptr<const Telegram> telegram) {
    strftime(newdatetime, sizeof(dateTime_), "%d.%m.%Y %H:%M", tm_);
    has_update(dateTime_, newdatetime, sizeof(dateTime_));

-    bool   ivtclock     = (telegram->message_data[0] & 0x80) == 0x80; // dont sync ivt-clock, #439
-    bool   junkersclock = model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS;
-    time_t ttime        = mktime(tm_); // thermostat time
+    bool ivtclock = (telegram->message_data[0] & 0x80) == 0x80; // dont sync ivt-clock, #439
+    tm_->tm_isdst = -1;                                         // determine dst
+    time_t ttime  = mktime(tm_);                                // make thermostat time
+    // change back emsesp timezone
+    EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+        if (settings.thermostat_sync == 2) {
+            setenv("TZ", settings.tzFormat.c_str(), 1);
+            tzset();
+        }
+    });
    // correct thermostat clock if we have valid ntp time, and could write the command
-    if (!ivtclock && !junkersclock && tset_ && EMSESP::system_.ntp_connected() && !EMSESP::system_.readonly_mode() && has_command(&dateTime_)) {
-        double difference = difftime(now, ttime);
+    if (sync && !ivtclock && tset_ && EMSESP::system_.ntp_connected() && !EMSESP::system_.readonly_mode() && has_command(&dateTime_)) {
+        int difference = difftime(now, ttime);
        if (difference > 15 || difference < -15) {
            if (setTimeRetry < 3) {
                if (!use_dst) {
                    set_datetime("ntp", 0); // set from NTP without dst
-                    LOG_INFO("thermostat time correction from ntp, ignoring dst");
+                    LOG_INFO("thermostat time correction %d seconds from ntp, ignoring dst", difference);
                } else {
                    set_datetime("ntp", -1); // set from NTP
-                    LOG_INFO("thermostat time correction from ntp");
+                    LOG_INFO("thermostat time correction %d seconds from ntp", difference);
                }
                setTimeRetry++;
            }
@@ -1761,10 +1795,6 @@ void Thermostat::process_RCTime(std::shared_ptr<const Telegram> telegram) {
    }
 #ifndef EMSESP_STANDALONE
    if (!tset_ && tm_->tm_year > 110) { // emsesp clock not set, but thermostat clock
-        if (ivtclock) {
-            tm_->tm_isdst = -1;          // determine dst
-            ttime         = mktime(tm_); // thermostat time
-        }
        struct timeval newnow = {.tv_sec = ttime, .tv_usec = 0};
 #if CONFIG_IDF_TARGET_ESP32C3
        // unknown how to set time on C3
@@ -1915,7 +1945,11 @@ bool Thermostat::set_hpminflowtemp(const char * value, const int8_t id) {
    }
    int v;
    if (Helpers::value2temperature(value, v)) {
-        write_command(hp_typeids[hc->hc()], 0, v, hp_typeids[hc->hc()]);
+        if (hc->control == 3 || hc->control == 6) { // remotes with humidity
+            write_command(hp_typeids[hc->hc()], 0, v, hp_typeids[hc->hc()]);
+        } else {
+            write_command(hp_typeids[hc->hc()], 1, v, hp_typeids[hc->hc()]);
+        }
        return true;
    }
    return false;
@@ -2355,7 +2389,7 @@ bool Thermostat::set_control(const char * value, const int8_t id) {
        }
        // BC400
        // 1-RC100, 2-RC100H, 3-RC200
-    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400) {
+    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
        if (Helpers::value2enum(value, ctrl, FL_(enum_control2))) {
            write_command(hpmode_typeids[hc->hc()], 3, ctrl);
            hc->control = ctrl; // set in advance, dont wait for verify
@@ -2435,7 +2469,7 @@ bool Thermostat::set_wwmode(const char * value, const int8_t id) {
            return false;
        }
        write_command(0xB0, 2, set, 0xB0);
-    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
        if (!Helpers::value2enum(value, set, FL_(enum_wwMode4), {0, 5, 1, 2, 4})) { // off, eco+, eco, comfort, auto
            return false;
        }
@@ -2590,30 +2624,36 @@ bool Thermostat::set_cooling(const char * value, const int8_t id) {

 // set cooling delays
 bool Thermostat::set_coolondelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 6, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 6, v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 6, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

 bool Thermostat::set_cooloffdelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 7, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 7, v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 7, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

@@ -3038,6 +3078,15 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
    if (dt == "ntp") {
        time_t now = time(nullptr);
        tm *   tm_ = localtime(&now);
+        EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+            if (settings.thermostat_sync == 2) {
+                setenv("TZ", settings.tzFormatT.c_str(), 1);
+                tzset();
+                tm_ = localtime(&now);
+                setenv("TZ", settings.tzFormat.c_str(), 1);
+                tzset();
+            }
+        });
        if (tm_->tm_year < 110) { // no valid time
            return false;
        }
@@ -3053,11 +3102,7 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
        data[5] = tm_->tm_sec;
        data[6] = (tm_->tm_wday + 6) % 7;            // Bosch counts from Mo, time from Su
        data[7] = (id == 0) ? 2 : tm_->tm_isdst + 2; // set DST and flag for ext. clock
-        if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
-            data[6]++; // Junkers use 1-7;
-            data[7] = 0;
-        }
-    } else if (dt.length() == 23) {
+    } else if (dt.length() == 23 || dt.length() == 21) {
        data[0] = (dt[7] - '0') * 100 + (dt[8] - '0') * 10 + (dt[9] - '0'); // year
        data[1] = (dt[3] - '0') * 10 + (dt[4] - '0');                       // month
        data[2] = (dt[11] - '0') * 10 + (dt[12] - '0');                     // hour
@@ -3065,10 +3110,35 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
        data[4] = (dt[14] - '0') * 10 + (dt[15] - '0');                     // min
        data[5] = (dt[17] - '0') * 10 + (dt[18] - '0');                     // sec
        data[6] = (dt[20] - '0');                                           // day of week, Mo:0
-        data[7] = (dt[22] - '0') + 2;                                       // DST and flag
-        if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
-            data[7] = 0;
-        }
+        data[7] = dt.length() == 21 ? 2 : (dt[22] - '0') + 2;               // DST and flag
+    } else if (dt.length() == 19 || dt.length() == 16) {
+        time_t now   = time(nullptr);
+        tm *   tm_   = localtime(&now);
+        data[0]      = (dt[7] - '0') * 100 + (dt[8] - '0') * 10 + (dt[9] - '0'); // year
+        tm_->tm_year = 100 + data[0];
+        data[1]      = (dt[3] - '0') * 10 + (dt[4] - '0'); // month
+        tm_->tm_mon  = data[1] - 1;
+        tm_->tm_hour = data[2] = (dt[11] - '0') * 10 + (dt[12] - '0');                        // hour
+        tm_->tm_mday = data[3] = (dt[0] - '0') * 10 + (dt[1] - '0');                          // day
+        tm_->tm_min = data[4] = (dt[14] - '0') * 10 + (dt[15] - '0');                         // min
+        tm_->tm_sec = data[5] = dt.length() == 16 ? 0 : (dt[17] - '0') * 10 + (dt[18] - '0'); // sec
+        tm_->tm_isdst         = -1;
+        // use thermostat time zone to determine day of week and daylight saving
+        EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+            if (settings.thermostat_sync == 2) {
+                setenv("TZ", settings.tzFormatT.c_str(), 1);
+                tzset();
+                auto t = mktime(tm_);
+                tm_    = localtime(&t);
+                setenv("TZ", settings.tzFormat.c_str(), 1);
+                tzset();
+            } else {
+                auto t = mktime(tm_);
+                tm_    = localtime(&t);
+            }
+        });
+        data[6] = (tm_->tm_wday + 6) % 7; // Bosch counts from Mo, time from Su
+        data[7] = tm_->tm_isdst + 2;      // set DST and flag for ext. clock
    } else {
        LOG_WARNING("Set date: invalid data, wrong length");
        return false;
@@ -3078,6 +3148,11 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
        return false;
    }

+    if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
+        data[6]++;   // Junkers use 1-7 for day of the week
+        data[7] = 0; // no dst setting
+    }
+
    // LOG_INFO("Setting date and time: %02d.%02d.2%03d-%02d:%02d:%02d-%d-%d", data[3], data[1], data[0], data[2], data[4], data[5], data[6], data[7]);
    write_command(EMS_TYPE_time, 0, data, 8, EMS_TYPE_time);

@@ -3142,6 +3217,7 @@ bool Thermostat::set_mode(const char * value, const int8_t id) {
        mode_list = FL_(enum_mode3);
        break;
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
        mode_list = FL_(enum_mode2);
        break;
@@ -3279,6 +3355,7 @@ bool Thermostat::set_mode_n(const uint8_t mode, const int8_t id) {
        offset = EMS_OFFSET_RC35Set_mode;
        break;
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
        offset = EMS_OFFSET_RCPLUSSet_mode_new;
        break;
@@ -3318,7 +3395,7 @@ bool Thermostat::set_mode_n(const uint8_t mode, const int8_t id) {
    // set hc->mode temporary until validate is received
    if (model_ == EMSdevice::EMS_DEVICE_FLAG_RC10) {
        hc->mode = set_mode_value >> 1;
-    } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_BC400 || model_ == EMSdevice::EMS_DEVICE_FLAG_CR120) {
+    } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_BC400 || model_ == EMSdevice::EMS_DEVICE_FLAG_UI800 || model_ == EMSdevice::EMS_DEVICE_FLAG_CR120) {
        hc->mode_new = set_mode_value;
    } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_RC300 || model_ == EMSdevice::EMS_DEVICE_FLAG_R3000 || model_ == EMSdevice::EMS_DEVICE_FLAG_HMC310
               || model_ == EMSdevice::EMS_DEVICE_FLAG_RC100) {
@@ -3335,13 +3412,19 @@ bool Thermostat::set_mode_n(const uint8_t mode, const int8_t id) {

 // sets the thermostat summermode for RC300
 bool Thermostat::set_summermode(const char * value, const int8_t id) {
+    uint8_t set;
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        if (Helpers::value2enum(value, set, FL_(enum_hpoperatingmode))) {
+            write_command(0x470, 0, set, 0x470);
+            return true;
+        }
+        return false;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }

-    uint8_t set;
-
    if (is_received(summer2_typeids[hc->hc()])) {
        if ((hc->statusbyte & 1) && Helpers::value2enum(value, set, FL_(enum_summermode))) {
            write_command(summer2_typeids[hc->hc()], 0, set, summer2_typeids[hc->hc()]);
@@ -3487,40 +3570,52 @@ bool Thermostat::set_boosttime(const char * value, const int8_t id) {
 }

 bool Thermostat::set_heatondelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 2, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 2, (uint8_t)v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 2, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

 bool Thermostat::set_heatoffdelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 3, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 3, (uint8_t)v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 3, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

 bool Thermostat::set_instantstart(const char * value, const int8_t id) {
-    auto hc = heating_circuit(id);
-    if (hc == nullptr) {
-        return false;
-    }
    int v;
    if (!Helpers::value2number(value, v)) {
        return false;
    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 4, (uint8_t)v, 0x470);
+        return true;
+    }
+    auto hc = heating_circuit(id);
+    if (hc == nullptr) {
+        return false;
+    }
    write_command(summer2_typeids[hc->hc()], 4, (uint8_t)v, summer2_typeids[hc->hc()]);
    return true;
 }
@@ -4045,6 +4140,10 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
        validate_typeid = set_typeids[hc->hc()];
        switch (mode) {
        case HeatingCircuit::Mode::SUMMER:
+            if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+                write_command(0x470, 1, temperature, 0x470);
+                return true;
+            }
            if (is_received(summer2_typeids[hc->hc()])) {
                offset     = 0x01;
                set_typeid = summer2_typeids[hc->hc()];
@@ -4056,6 +4155,10 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
            factor          = 1;
            break;
        case HeatingCircuit::Mode::COOLSTART:
+            if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+                write_command(0x470, 5, temperature, 0x470);
+                return true;
+            }
            offset          = 5;
            set_typeid      = summer2_typeids[hc->hc()];
            validate_typeid = set_typeid;
@@ -4144,7 +4247,7 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
            if (model == EMSdevice::EMS_DEVICE_FLAG_CR120 && mode_ == HeatingCircuit::Mode::MANUAL) {
                offset = 22; // manual offset CR120
            } else if (mode_ == HeatingCircuit::Mode::MANUAL) {
-                offset = 10; // manual offset
+                offset = hc->hpoperatingstate == 2 ? 17 : 10; // cooling or manual offset
            } else {
                offset = 8; // auto offset
                // special case to reactivate auto temperature, see #737, #746
@@ -4443,6 +4546,7 @@ void Thermostat::register_device_values() {
    case EMSdevice::EMS_DEVICE_FLAG_RC300:
    case EMSdevice::EMS_DEVICE_FLAG_R3000:
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
    case EMSdevice::EMS_DEVICE_FLAG_HMC310:
        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
@@ -4560,6 +4664,70 @@ void Thermostat::register_device_values() {
        register_device_value(
            DeviceValueTAG::TAG_DEVICE_DATA, &pvLowerCool_, DeviceValueType::INT8, FL_(pvLowerCool), DeviceValueUOM::K, MAKE_CF_CB(set_pvLowerCool), -5, 0);
        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &absent_, DeviceValueType::BOOL, FL_(absent), DeviceValueUOM::NONE, MAKE_CF_CB(set_absent));
+        if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &hpoperatingmode,
+                                  DeviceValueType::ENUM,
+                                  FL_(enum_hpoperatingmode),
+                                  FL_(hpoperatingmode),
+                                  DeviceValueUOM::NONE,
+                                  MAKE_CF_CB(set_summermode));
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &summertemp,
+                                  DeviceValueType::UINT8,
+                                  FL_(summertemp),
+                                  DeviceValueUOM::DEGREES,
+                                  MAKE_CF_CB(set_summertemp),
+                                  10,
+                                  30);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &instantstart,
+                                  DeviceValueType::UINT8,
+                                  FL_(instantstart),
+                                  DeviceValueUOM::K,
+                                  MAKE_CF_CB(set_instantstart),
+                                  1,
+                                  10);
+            register_device_value(
+                DeviceValueTAG::TAG_DEVICE_DATA, &coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &heatondelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(heatondelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_heatondelay),
+                                  1,
+                                  48);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &heatoffdelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(heatoffdelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_heatoffdelay),
+                                  1,
+                                  48);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &coolondelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(coolondelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_coolondelay),
+                                  1,
+                                  48);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &cooloffdelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(cooloffdelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_cooloffdelay),
+                                  1,
+                                  48);
+        }
+
        break;
    case EMSdevice::EMS_DEVICE_FLAG_RC10:
        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
@@ -4902,9 +5070,10 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
    case EMSdevice::EMS_DEVICE_FLAG_RC300:
    case EMSdevice::EMS_DEVICE_FLAG_R3000:
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
    case EMSdevice::EMS_DEVICE_FLAG_HMC310:
-        if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
+        if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_UI800 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
            register_device_value(tag, &hc->mode_new, DeviceValueType::ENUM, FL_(enum_mode2), FL_(mode), DeviceValueUOM::NONE, MAKE_CF_CB(set_mode));
        } else {
            register_device_value(tag, &hc->mode, DeviceValueType::ENUM, FL_(enum_mode), FL_(mode), DeviceValueUOM::NONE, MAKE_CF_CB(set_mode));
@@ -4997,6 +5166,8 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
        register_device_value(tag, &hc->hpminflowtemp, DeviceValueType::UINT8, FL_(hpminflowtemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_hpminflowtemp));
        if (model == EMSdevice::EMS_DEVICE_FLAG_BC400) {
            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control2), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
+        } else if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control3), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
        } else {
            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control1), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
        }
@@ -5012,14 +5183,16 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
                                  101);
            register_device_value(tag, &hc->remotehum, DeviceValueType::CMD, FL_(remotehum), DeviceValueUOM::PERCENT, MAKE_CF_CB(set_remotehum), -1, 101);
        }
-        register_device_value(tag, &hc->heatondelay, DeviceValueType::UINT8, FL_(heatondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatondelay), 1, 48);
-        register_device_value(tag, &hc->heatoffdelay, DeviceValueType::UINT8, FL_(heatoffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatoffdelay), 1, 48);
-        register_device_value(tag, &hc->instantstart, DeviceValueType::UINT8, FL_(instantstart), DeviceValueUOM::K, MAKE_CF_CB(set_instantstart), 1, 10);
+        if (model != EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_device_value(tag, &hc->heatondelay, DeviceValueType::UINT8, FL_(heatondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatondelay), 1, 48);
+            register_device_value(tag, &hc->heatoffdelay, DeviceValueType::UINT8, FL_(heatoffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatoffdelay), 1, 48);
+            register_device_value(tag, &hc->coolondelay, DeviceValueType::UINT8, FL_(coolondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_coolondelay), 1, 48);
+            register_device_value(tag, &hc->cooloffdelay, DeviceValueType::UINT8, FL_(cooloffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_cooloffdelay), 1, 48);
+            register_device_value(tag, &hc->instantstart, DeviceValueType::UINT8, FL_(instantstart), DeviceValueUOM::K, MAKE_CF_CB(set_instantstart), 1, 10);
+            register_device_value(tag, &hc->coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
+        }
        register_device_value(tag, &hc->boost, DeviceValueType::BOOL, FL_(boost), DeviceValueUOM::NONE, MAKE_CF_CB(set_boost));
        register_device_value(tag, &hc->boosttime, DeviceValueType::UINT8, FL_(boosttime), DeviceValueUOM::HOURS, MAKE_CF_CB(set_boosttime));
-        register_device_value(tag, &hc->coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
-        register_device_value(tag, &hc->coolondelay, DeviceValueType::UINT8, FL_(coolondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_coolondelay), 1, 48);
-        register_device_value(tag, &hc->cooloffdelay, DeviceValueType::UINT8, FL_(cooloffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_cooloffdelay), 1, 48);
        register_device_value(tag,
                              &hc->switchProgMode,
                              DeviceValueType::ENUM,
@@ -5359,9 +5532,10 @@ void Thermostat::register_device_values_dhw(std::shared_ptr<Thermostat::DhwCircu
    case EMSdevice::EMS_DEVICE_FLAG_RC300:
    case EMSdevice::EMS_DEVICE_FLAG_R3000:
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
    case EMSdevice::EMS_DEVICE_FLAG_HMC310:
-        if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+        if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
            register_device_value(tag, &dhw->wwMode_, DeviceValueType::ENUM, FL_(enum_wwMode4), FL_(wwMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwmode));
        } else if (model() == EMSdevice::EMS_DEVICE_FLAG_R3000) {
            register_device_value(tag, &dhw->wwMode_, DeviceValueType::ENUM, FL_(enum_wwMode5), FL_(wwMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwmode));
@@ -241,7 +241,7 @@ class Thermostat : public EMSdevice {
    // check to see if the thermostat is a hybrid of the R300
    inline bool isRC300() const {
        return (model() == EMSdevice::EMS_DEVICE_FLAG_RC300 || model() == EMSdevice::EMS_DEVICE_FLAG_R3000 || model() == EMSdevice::EMS_DEVICE_FLAG_BC400
-                || model() == EMSdevice::EMS_DEVICE_FLAG_CR120 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310);
+                || model() == EMSdevice::EMS_DEVICE_FLAG_CR120 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800);
    }

    inline uint8_t id2dhw(const int8_t id) const { // returns telegram offset for TAG(id)
@@ -296,6 +296,16 @@ class Thermostat : public EMSdevice {
    uint8_t absent_;
    uint8_t hasSolar_;

+    // BC400/UI800 telegram 0x470
+    uint8_t hpoperatingmode;
+    uint8_t summertemp;
+    uint8_t heatondelay;
+    uint8_t heatoffdelay;
+    uint8_t instantstart;
+    uint8_t coolstart;
+    uint8_t coolondelay;
+    uint8_t cooloffdelay;
+
    // HybridHP
    uint8_t hybridStrategy_;  // co2 = 1, cost = 2, temperature = 3, mix = 4
    int8_t  switchOverTemp_;  // degrees
@@ -451,6 +461,7 @@ class Thermostat : public EMSdevice {
    void process_RC300Set2(std::shared_ptr<const Telegram> telegram);
    void process_RC300Summer(std::shared_ptr<const Telegram> telegram);
    void process_RC300Summer2(std::shared_ptr<const Telegram> telegram);
+    void process_RC300Summer3(std::shared_ptr<const Telegram> telegram);
    void process_RC300WWmode(std::shared_ptr<const Telegram> telegram);
    void process_RC300WWmode2(std::shared_ptr<const Telegram> telegram);
    void process_RC300WWtemp(std::shared_ptr<const Telegram> telegram);
@@ -28,9 +28,41 @@ Water::Water(uint8_t device_type, uint8_t device_id, uint8_t product_id, const c
    : EMSdevice(device_type, device_id, product_id, version, name, flags, brand) {
    dhw_       = device_id - EMSdevice::EMS_DEVICE_ID_DHW1;
    int8_t tag = DeviceValueTAG::TAG_DHW1 + dhw_;
-    if (flags == EMSdevice::EMS_DEVICE_FLAG_SM100) { // device_id 0x2A,  DHW3
-
-        // telegram handlers
+    if (flags == EMSdevice::EMS_DEVICE_FLAG_IPM) {
+        dhw_ = 0;
+        tag  = DeviceValueTAG::TAG_DHW1;
+        register_telegram_type(0x34, "UBAMonitorWW", false, MAKE_PF_CB(process_IPMMonitorWW));
+        register_telegram_type(0x1E, "HydrTemp", false, MAKE_PF_CB(process_IPMHydrTemp));
+        register_telegram_type(0x33, "UBAParameterWW", true, MAKE_PF_CB(process_IPMParameterWW), 12);
+        // register_telegram_type(0x10D, "wwNTCStatus", false, MAKE_PF_CB(process_wwNTCStatus));
+        // device values...
+        register_device_value(tag, &wwSelTemp_, DeviceValueType::UINT8, FL_(wwSelTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwSelTemp));
+        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &wwTemp2_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwCurTemp2), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &HydrTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(hydrTemp), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
+        register_device_value(tag, &wwFlowTempOffset_, DeviceValueType::UINT8, FL_(wwFlowTempOffset), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwFlowTempOffset));
+        register_device_value(tag, &wwHystOn_, DeviceValueType::INT8, FL_(wwHystOn), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOn));
+        register_device_value(tag, &wwHystOff_, DeviceValueType::INT8, FL_(wwHystOff), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOff));
+        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
+        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
+        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
+    } else if (tag == DeviceValueTAG::TAG_DHW1 || tag == DeviceValueTAG::TAG_DHW2) { // MM100 or SM100
+        register_telegram_type(0x331 + dhw_, "MMPLUSStatusMessage_WWC", false, MAKE_PF_CB(process_MMPLUSStatusMessage_WWC));
+        register_telegram_type(0x313 + dhw_, "MMPLUSConfigMessage_WWC", true, MAKE_PF_CB(process_MMPLUSConfigMessage_WWC), 11);
+        // register_telegram_type(0x33B + type_offset, "MMPLUSSetMessage_WWC", true, MAKE_PF_CB(process_MMPLUSSetMessage_WWC));
+        // device values...
+        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &wwStatus_, DeviceValueType::INT8, FL_(wwTempStatus), DeviceValueUOM::NONE);
+        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
+        register_device_value(tag, &wwMaxTemp_, DeviceValueType::UINT8, FL_(wwMaxTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwMaxTemp));
+        register_device_value(tag, &wwDiffTemp_, DeviceValueType::INT8, FL_(wwDiffTemp), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwDiffTemp));
+        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
+        register_device_value(tag, &wwRedTemp_, DeviceValueType::UINT8, FL_(wwRedTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRedTemp));
+        register_device_value(tag, &wwRequiredTemp_, DeviceValueType::UINT8, FL_(wwRequiredTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRequiredTemp));
+        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
+        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
+    } else { // device_id 0x2A,  DHW3, SM100
        register_telegram_type(0x07D6 + dhw_ - 2, "SM100wwTemperature", false, MAKE_PF_CB(process_SM100wwTemperature));
        register_telegram_type(0x07E0 + dhw_ - 2, "SM100wwStatus2", true, MAKE_PF_CB(process_SM100wwStatus2), 10);
        register_telegram_type(0x07A6, "SM100wwParam", true, MAKE_PF_CB(process_SM100wwParam), 20); // same telegram for all circuits
@@ -67,41 +99,6 @@ Water::Water(uint8_t device_type, uint8_t device_id, uint8_t product_id, const c
        register_device_value(tag, &wwRetValve_, DeviceValueType::UINT8, FL_(valveReturn), DeviceValueUOM::PERCENT, MAKE_CF_CB(set_wwRetValve));
        register_device_value(tag, &wwDeltaTRet_, DeviceValueType::UINT8, FL_(deltaTRet), DeviceValueUOM::K, MAKE_CF_CB(set_wwDeltaTRet));
        register_device_value(tag, &errorDisp_, DeviceValueType::ENUM, FL_(enum_errorDisp), FL_(errorDisp), DeviceValueUOM::NONE, MAKE_CF_CB(set_errorDisp));
-
-    } else if (flags == EMSdevice::EMS_DEVICE_FLAG_MMPLUS) { // dhw1 and dhw 2
-        register_telegram_type(0x331 + dhw_, "MMPLUSStatusMessage_WWC", false, MAKE_PF_CB(process_MMPLUSStatusMessage_WWC));
-        register_telegram_type(0x313 + dhw_, "MMPLUSConfigMessage_WWC", true, MAKE_PF_CB(process_MMPLUSConfigMessage_WWC), 11);
-        // register_telegram_type(0x33B + type_offset, "MMPLUSSetMessage_WWC", true, MAKE_PF_CB(process_MMPLUSSetMessage_WWC));
-        // device values...
-        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &wwStatus_, DeviceValueType::INT8, FL_(wwTempStatus), DeviceValueUOM::NONE);
-        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
-        register_device_value(tag, &wwMaxTemp_, DeviceValueType::UINT8, FL_(wwMaxTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwMaxTemp));
-        register_device_value(tag, &wwDiffTemp_, DeviceValueType::INT8, FL_(wwDiffTemp), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwDiffTemp));
-        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
-        register_device_value(tag, &wwRedTemp_, DeviceValueType::UINT8, FL_(wwRedTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRedTemp));
-        register_device_value(tag, &wwRequiredTemp_, DeviceValueType::UINT8, FL_(wwRequiredTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRequiredTemp));
-        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
-        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
-    } else if (flags == EMSdevice::EMS_DEVICE_FLAG_IPM) {
-        dhw_ = 0;
-        tag  = DeviceValueTAG::TAG_DHW1;
-        register_telegram_type(0x34, "UBAMonitorWW", false, MAKE_PF_CB(process_IPMMonitorWW));
-        register_telegram_type(0x1E, "HydrTemp", false, MAKE_PF_CB(process_IPMHydrTemp));
-        register_telegram_type(0x33, "UBAParameterWW", true, MAKE_PF_CB(process_IPMParameterWW), 12);
-        // register_telegram_type(0x10D, "wwNTCStatus", false, MAKE_PF_CB(process_wwNTCStatus));
-        // device values...
-        register_device_value(tag, &wwSelTemp_, DeviceValueType::UINT8, FL_(wwSelTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwSelTemp));
-        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &wwTemp2_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwCurTemp2), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &HydrTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(hydrTemp), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
-        register_device_value(tag, &wwFlowTempOffset_, DeviceValueType::UINT8, FL_(wwFlowTempOffset), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwFlowTempOffset));
-        register_device_value(tag, &wwHystOn_, DeviceValueType::INT8, FL_(wwHystOn), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOn));
-        register_device_value(tag, &wwHystOff_, DeviceValueType::INT8, FL_(wwHystOff), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOff));
-        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
-        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
-        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
    }
 }

@@ -361,7 +358,11 @@ bool Water::set_wwCircTc(const char * value, const int8_t id) {
    if (!Helpers::value2bool(value, b)) {
        return false;
    }
-    write_command(0x33B + dhw_, 4, b ? 0x01 : 0x00, 0x33B + dhw_);
+    if (flags() == EMSdevice::EMS_DEVICE_FLAG_MMPLUS) {
+        write_command(0x33B + dhw_, 4, b ? 0x01 : 0x00, 0x33B + dhw_);
+    } else { // SM100
+        write_command(0x7A5, 4, b ? 0xFF : 0x00, 0x7A5);
+    }
    return true;
 }

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.8.3-dev.1"
+#define EMSESP_APP_VERSION "3.8.4"
@@ -35,6 +35,11 @@ WebAPIService::WebAPIService(AsyncWebServer * server, SecurityManager * security
 // POST|GET api/{device}
 // POST|GET api/{device}/{entity}
 void WebAPIService::webAPIService(AsyncWebServerRequest * request, JsonVariant json) {
+    static uint64_t lastcall = 0;
+    if (uuid::get_uptime_ms() - lastcall < 50 && request->method() == HTTP_GET) {
+        request->send(429); //too many requests
+        return;
+    }
    JsonDocument input_doc; // has no body JSON so create dummy as empty input object
    JsonObject   input;
    // if no body then treat it as a secure GET
@@ -49,6 +54,7 @@ void WebAPIService::webAPIService(AsyncWebServerRequest * request, JsonVariant j
        input["data"] = json.as<std::string>();
    }
    parse(request, input);
+    lastcall = uuid::get_uptime_ms();
 }

 // for POSTS accepting plain text data
@@ -77,7 +77,9 @@ StateUpdateResult WebCustomEntity::update(JsonObject root, WebCustomEntity & web
        if (entityItem.ram == 2) { // NVS
            char key[sizeof(entityItem.name) + 2];
            snprintf(key, sizeof(key), "c:%s", entityItem.name);
-            EMSESP::nvs_.remove(key);
+            if (EMSESP::nvs_.isKey(key)) {
+                EMSESP::nvs_.remove(key);
+            }
        }
        if (entityItem.ram) { // save name/value pairs for change checking
            doc[entityItem.name] = entityItem.value;
@@ -76,7 +76,9 @@ StateUpdateResult WebScheduler::update(JsonObject root, WebScheduler & webSchedu
    for (ScheduleItem & scheduleItem : webScheduler.scheduleItems) {
        char key[sizeof(scheduleItem.name) + 2];
        snprintf(key, sizeof(key), "s:%s", scheduleItem.name);
-        EMSESP::nvs_.remove(key);
+        if (EMSESP::nvs_.isKey(key)) {
+            EMSESP::nvs_.remove(key);
+        }
    }
    webScheduler.scheduleItems.clear();
    EMSESP::webSchedulerService.ha_reset();
@@ -345,7 +347,11 @@ uint8_t WebSchedulerService::count_entities(bool cmd_only) {
 // execute scheduled command
 bool WebSchedulerService::command(const char * name, const std::string & command, const std::string & data) {
    std::string cmd = Helpers::toLower(command);
-
+    if (cmd == "system/message") {
+        EMSESP::logger().info("Message: %s", data.c_str()); // send to log
+        Mqtt::queue_publish(F_(message), data);             // send to MQTT if enabled
+        return true;
+    }
    // check http commands. e.g.
    // tasmota(get): http://<tasmotaIP>/cm?cmnd=power%20ON
    // shelly(get): http://<shellyIP>/relais/0?turn=on
@@ -353,7 +359,11 @@ bool WebSchedulerService::command(const char * name, const std::string & command
    JsonDocument doc;
    if (deserializeJson(doc, cmd) == DeserializationError::Ok) {
        HTTPClient * http = new HTTPClient;
-        std::string  url  = doc["url"] | "";
+#ifndef EMSESP_STANDALONE
+        http->setConnectTimeout(10000);
+        http->setTimeout(10000);
+#endif
+        std::string url = doc["url"] | "";
        // for a GET with parameters replace commands with values
        // don't search the complete url, it may contain a devicename in path
        auto q = url.find_first_of('?');
@@ -401,6 +411,7 @@ bool WebSchedulerService::command(const char * name, const std::string & command
            return true;
        }
        // we can add other json tests here
+        delete http;
    }

    doc.clear();
@@ -443,8 +454,7 @@ bool WebSchedulerService::command(const char * name, const std::string & command
 // queue schedules to be handled executed in scheduler-loop
 bool WebSchedulerService::onChange(const char * cmd) {
    for (ScheduleItem & scheduleItem : *scheduleItems_) {
-        if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_ONCHANGE
-            && Helpers::toLower(scheduleItem.time.c_str()).find(Helpers::toLower(cmd)) != std::string::npos) {
+        if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_ONCHANGE && Helpers::toLower(scheduleItem.time.c_str()) == Helpers::toLower(cmd)) {
            cmd_changed_.push_back(&scheduleItem);
            return true;
        }
@@ -480,15 +490,14 @@ void WebSchedulerService::loop() {
    static uint32_t last_uptime_min = 0;
    static uint32_t last_uptime_sec = 0;

-    if (!raw_value.empty()) { // process a value from system/message command
-        computed_value = compute(raw_value);
-        raw_value.clear();
-    }
-
    // get list of scheduler events and exit if it's empty
    if (scheduleItems_->empty()) {
        return;
    }
+    // do not execute any command in the first 60 secondes
+    if (uuid::get_uptime_sec() < 60) {
+        return;
+    }

    // check if we have onChange events
    while (!cmd_changed_.empty()) {
@@ -532,7 +541,8 @@ void WebSchedulerService::loop() {
            // retry startup commands not yet executed
            if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_TIMER && scheduleItem.elapsed_min == 0
                && scheduleItem.retry_cnt < MAX_STARTUP_RETRIES) {
-                scheduleItem.retry_cnt = command(scheduleItem.name, scheduleItem.cmd.c_str(), scheduleItem.value.c_str()) ? 0xFF : scheduleItem.retry_cnt + 1;
+                scheduleItem.retry_cnt =
+                    command(scheduleItem.name, scheduleItem.cmd.c_str(), compute(scheduleItem.value.c_str())) ? 0xFF : scheduleItem.retry_cnt + 1;
            }
            // scheduled timer commands
            if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_TIMER && scheduleItem.elapsed_min > 0
@@ -543,10 +553,10 @@ void WebSchedulerService::loop() {
        last_uptime_min = uptime_min;
    }

-    // check calender, sync to RTC, only execute if year is valid
+    // check calender, sync to RTC, only execute if year is valid and uptime more than a minute
    time_t now = time(nullptr);
    tm *   tm  = localtime(&now);
-    if (tm->tm_min != last_tm_min && tm->tm_year > 120) {
+    if (tm->tm_min != last_tm_min && tm->tm_year > 120 && uuid::get_uptime_sec() > 60) {
        // find the real dow and minute from RTC
        uint8_t  real_dow = 1 << tm->tm_wday; // 1 is Sunday
        uint16_t real_min = tm->tm_hour * 60 + tm->tm_min;
@@ -90,9 +90,6 @@ class WebSchedulerService : public StatefulService<WebScheduler> {

    std::string get_metrics_prometheus();

-    std::string raw_value;
-    std::string computed_value;
-
 #if defined(EMSESP_TEST)
    void load_test_data();
 #endif
@@ -267,6 +267,9 @@ StateUpdateResult WebSettings::update(JsonObject root, WebSettings & settings) {
    }

    settings.locale = root["locale"] | EMSESP_DEFAULT_LOCALE;
+    if (settings.locale == "cz") { // convert from older settings file
+        settings.locale = "cs";
+    }
    EMSESP::system_.locale(settings.locale);
    if (Mqtt::ha_enabled() && original_settings.locale != settings.locale) {
        add_flags(ChangeFlags::MQTT);
@@ -177,6 +177,10 @@ void WebStatusService::systemStatus(AsyncWebServerRequest * request) {
        // we're ready to do the actual restart ASAP
        EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_RESTART_REQUESTED);
    }
+    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_ERROR_UPLOAD) {
+        // error is reported, back to normal state
+        EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_NORMAL);
+    }

 #endif

@@ -241,6 +245,7 @@ void WebStatusService::action(AsyncWebServerRequest * request, JsonVariant json)
    if (!ok) {
        EMSESP::logger().err("Action '%s' failed", action.c_str());
        request->send(400); // bad request
+        delete response;
        return;
    }

@@ -588,4 +588,4 @@ void run_tests() {
    RUN_TEST(test_57);
 }

-// ---------- END - CUT HERE ----------
+// ---------- END - CUT HERE ----------
Author	SHA1	Message	Date
proddy	c8a96352ec	3.8.4	2026-08-04 08:13:45 +02:00
proddy	02caaef916	fix firmware size check	2026-08-03 09:59:46 +02:00
proddy	ba0f4cd008	3.8.3	2026-08-02 09:56:04 +02:00
proddy	45f7d91b43	Merge remote-tracking branch 'origin/dev'	2026-08-02 09:55:48 +02:00
Proddy	e0f59a4c31	Merge pull request #3176 from proddy/dev pkg update and getting ready for stable	2026-08-01 17:05:18 +02:00
proddy	7eba8acbb4	3.8.3-dev.11	2026-08-01 17:04:13 +02:00
proddy	d0e6a603bb	auto-formatting	2026-08-01 16:57:41 +02:00
proddy	36b4dd55a7	pkg update	2026-08-01 16:44:16 +02:00
proddy	341a4d4e1d	update version	2026-08-01 16:44:11 +02:00
proddy	a61745b710	formatting	2026-08-01 16:44:03 +02:00
proddy	b1ebd81ca2	update	2026-08-01 16:43:55 +02:00
Proddy	1ff53e6ac7	Merge pull request #3171 from MichaelDvP/dev fix water SM100	2026-07-28 19:02:52 +02:00
MichaelDvP	9cab3b480e	chore: update generated files for v3.8.3-dev.10	2026-07-22 15:37:09 +00:00
MichaelDvP	edfbbe68b0	language code "cs"	2026-07-22 17:28:16 +02:00
MichaelDvP	96e8a0d916	fix water module #3164	2026-07-22 17:27:08 +02:00
MichaelDvP	8c90d10601	dump	2026-07-20 15:35:48 +02:00
Proddy	bacd3faac2	Merge pull request #3159 from MichaelDvP/dev dev9	2026-07-15 08:44:31 +02:00
MichaelDvP	2b187fb848	dev8f->dev9	2026-07-14 21:56:41 +02:00
MichaelDvP	4a12066e37	update pkg	2026-07-13 15:08:19 +02:00
MichaelDvP	b82f8c979f	process message from scheduler	2026-07-13 12:32:21 +02:00
MichaelDvP	342878f628	fix standalone	2026-07-12 17:25:51 +02:00
MichaelDvP	4e47be7fa6	Merge remote-tracking branch 'mdvp/dev' into dev	2026-07-12 17:17:42 +02:00
MichaelDvP	2b25ae18d1	set 10 sectimeout for http requests	2026-07-12 17:17:07 +02:00
MichaelDvP	98c9e011bc	chore: update generated files for v3.8.3-dev.8d	2026-07-12 09:16:46 +00:00
MichaelDvP	cb1cb356ce	prevent errorlogs for nonexisting nvs values, version numbering to dev.8d	2026-07-12 11:05:28 +02:00
MichaelDvP	20fc5ede78	changelog	2026-07-12 10:31:51 +02:00
MichaelDvP	a20d1d8970	fix typo	2026-07-12 10:17:02 +02:00
MichaelDvP	a647e16f68	update asyncwebserver, dev.11	2026-07-12 09:57:05 +02:00
MichaelDvP	49ab5e3d72	delay scheduler loop after startup	2026-07-12 09:46:43 +02:00
MichaelDvP	9c905c8bab	donot fetch system_info for reset command	2026-07-12 09:46:18 +02:00
MichaelDvP	7ab343a216	fix crashes from #3146	2026-07-12 08:17:40 +02:00
MichaelDvP	188cc7b666	check for "http" before allocating a http-client	2026-07-11 19:12:34 +02:00
MichaelDvP	193e5d591c	block too many api GET requests	2026-07-11 14:48:19 +02:00
MichaelDvP	ff3f4d3a6d	update pkg	2026-07-11 14:47:39 +02:00
MichaelDvP	5129b475c5	NTP sync enabled by default	2026-07-11 14:47:19 +02:00
MichaelDvP	f31dbd44a5	rollback regex	2026-07-10 12:13:31 +02:00
MichaelDvP	5c55c2216e	rollback regex crashes	2026-07-10 10:41:43 +02:00
MichaelDvP	5a1d06d39e	fix possible memory leaks	2026-07-10 09:33:15 +02:00
MichaelDvP	9443cf3c87	Merge remote-tracking branch 'mdvp/dev' into dev	2026-07-10 08:35:03 +02:00
MichaelDvP	fa31dcdf24	use F7 only for auto mode	2026-07-10 08:33:19 +02:00
MichaelDvP	2c80cc597e	SRC modes from set-telegram	2026-07-10 08:17:53 +02:00
MichaelDvP	d7641fbb2f	use regex for isnum	2026-07-10 08:16:58 +02:00
MichaelDvP	5742c03eee	chore: update generated files for v3.8.3-dev.10	2026-07-09 18:14:31 +00:00
MichaelDvP	b2858ab3e7	Merge remote-tracking branch 'mdvp/dev' into dev	2026-07-09 19:59:37 +02:00
MichaelDvP	2255ad0b17	update modbus	2026-07-09 19:46:45 +02:00
MichaelDvP	ed8adf2617	SRC modes from MenuConfig F7	2026-07-09 19:42:32 +02:00
MichaelDvP	5c2205cf65	calc_dew to helpers	2026-07-09 19:41:54 +02:00
MichaelDvP	f6cb695635	direct call compute	2026-07-09 19:41:13 +02:00
MichaelDvP	1450e79b64	chore: update generated files for v3.8.3-dev.10	2026-07-06 15:24:45 +00:00
MichaelDvP	fae0f9fb49	changelog	2026-07-06 17:12:41 +02:00
MichaelDvP	8638424d5b	fix water circulation for dhw circuits 1/2	2026-07-06 17:00:12 +02:00
MichaelDvP	1d016ec356	formatting, manual set time	2026-07-06 16:55:23 +02:00
MichaelDvP	f16b10f544	fix different timezones	2026-07-06 16:11:14 +02:00
MichaelDvP	dd0c8a5ca8	SRC cooling mode, guess	2026-07-06 10:24:27 +02:00
MichaelDvP	7175191c66	Merge remote-tracking branch 'emsesp/dev' into dev	2026-07-06 08:25:11 +02:00
MichaelDvP	f7a81c50b0	fix standalone, formatting	2026-07-06 08:24:43 +02:00
Proddy	cfbcaa6fce	Merge pull request #3149 from Cali1205/dev update water.cpp: modify set_wwCircTc to use new command values	2026-07-05 22:02:16 +02:00
MichaelDvP	abd1c36ec9	option to sync thermostat clock	2026-07-05 21:20:54 +02:00
Rainer	ebd6d15c48	update water.cpp: modify set_wwCircTc to use new command values	2026-07-05 17:34:20 +02:00
MichaelDvP	f4979d905d	hpminflowtemp telegramoffset depends on control	2026-06-29 21:17:51 +02:00
MichaelDvP	496884c78a	dev.9, changelog	2026-06-29 10:02:58 +02:00
MichaelDvP	696c82364e	fix offset of hpminflowtemp #3144	2026-06-29 10:01:34 +02:00
Proddy	c55655c0c5	Merge pull request #3143 from proddy/dev fix thermostat date/time for HT3	2026-06-28 16:35:39 +02:00
proddy	55a0e4b2b5	Revert "Reduce DeviceValue heap usage with on-demand custom name" This reverts commit `5aadf7234f`.	2026-06-28 16:30:24 +02:00
proddy	eceb097cc7	fix thermostat date/time for HT3	2026-06-28 16:08:31 +02:00
Proddy	0e18645ba5	Merge branch 'emsesp:dev' into dev	2026-06-27 14:32:48 +02:00
Proddy	63f49a347b	Merge pull request #3136 from MichaelDvP/dev fixes for #3127 and #3135	2026-06-27 14:32:04 +02:00
MichaelDvP	943048a920	dev.7	2026-06-27 13:14:57 +02:00
MichaelDvP	2b8a0bd8b7	Merge remote-tracking branch 'emsesp/dev' into dev	2026-06-27 13:06:19 +02:00
MichaelDvP	d83b56a13c	calcutae dewtemp for Easycontrol, #3135	2026-06-27 13:03:10 +02:00
Proddy	1f34a41d27	Merge branch 'emsesp:dev' into dev	2026-06-25 21:14:59 +02:00
Proddy	343ac5880c	Merge pull request #3134 from s-schnitzer/fix-negative-dew-point-calculation fix: negative dew point calculation (emulated RC100H)	2026-06-25 21:05:17 +02:00
s-schnitzer	855edace20	fix: negative dew point calc. (emulated RC100H)	2026-06-25 18:10:52 +02:00
Proddy	aabc4f021c	Merge pull request #3128 from soderdaen/fix-wifi-scan Fix: AP crash and infinite loop during WiFi scan.	2026-06-23 21:01:21 +02:00
MichaelDvP	0aaa566e73	Merge remote-tracking branch 'emsesp/dev' into dev	2026-06-23 08:02:32 +02:00
MichaelDvP	20e3d6a19b	dev.7, fix crash	2026-06-23 07:57:55 +02:00
MichaelDvP	67953fccd6	from PR #3128	2026-06-22 11:59:06 +02:00
MichaelDvP	0c910bc822	fix mock-api	2026-06-22 11:58:05 +02:00
soderdaen	b6a7fb0bf0	Update changelog_latest.md and emsesp_version	2026-06-21 21:15:47 +02:00
MichaelDvP	95f475ab6f	command message calsl compute direct,#3127	2026-06-21 10:53:10 +02:00
soderdaen	f8fa092ac3	Fix: AP crash and infinite loop during WiFi scan.	2026-06-20 10:42:38 +02:00
proddyandCursor	5aadf7234f	Reduce DeviceValue heap usage with on-demand custom name Store the per-entity custom_fullname as a heap-allocated string that is only created when a custom name is actually set, instead of an inline std::string on every DeviceValue. Saves ~20 bytes per entity (hundreds to ~1000 entities), reclaiming internal heap on no-PSRAM boards. Co-authored-by: Cursor <cursoragent@cursor.com>	2026-06-15 19:53:14 +02:00
Proddy	b8a63aeac6	Merge pull request #3125 from proddy/dev remove old S3 binaries #3123	2026-06-15 18:24:46 +02:00
proddy	908a9ebbfc	remove old S3 binaries #3123	2026-06-15 18:23:58 +02:00
Proddy	dbf970d869	Merge branch 'emsesp:dev' into dev	2026-06-07 12:52:09 +02:00
Proddy	9cb2455af2	Merge pull request #3111 from MichaelDvP/dev reset system status	2026-06-07 12:51:51 +02:00
MichaelDvP	f99ca7f013	seltemp write in cooling mode #1781	2026-06-04 12:21:16 +02:00
MichaelDvP	7349bc9ebf	reset system status	2026-06-04 12:20:12 +02:00
MichaelDvP	ccd3a7b223	Merge remote branch “emsesp/dev”	2026-06-04 11:52:53 +02:00
Proddy	33602f65f3	Merge branch 'emsesp:dev' into dev	2026-05-28 20:55:54 +01:00
Proddy	0493f93976	Merge pull request #3101 from MichaelDvP/dev extra handling for 0x470. #3096, fix scheduler onChange name check	2026-05-28 20:55:14 +01:00
MichaelDvP	238c9b7860	fix scheduler onChange	2026-05-28 13:14:14 +02:00
MichaelDvP	0823b7882b	Merge remote branch “mdvp/dev”	2026-05-28 13:12:14 +02:00
MichaelDvP	cf2f816527	chore: update generated files for v3.8.3-dev.5	2026-05-27 09:19:59 +00:00
MichaelDvP	559336a2a7	Merge remote branch “mdvp/dev”	2026-05-27 11:08:35 +02:00
MichaelDvP	0e6cb363ad	0x470 telegram is not hc dependend	2026-05-27 10:52:18 +02:00
MichaelDvP	66b1b1cb24	revert settings for txmode off and 0x0d without ack	2026-05-27 10:49:29 +02:00
MichaelDvP	1d608b7705	chore: update generated files for v3.8.3-dev.4a	2026-05-25 15:11:10 +00:00
MichaelDvP	6dc8072106	FLAG UI800, no poll-ack on id 0x0D	2026-05-25 16:59:41 +02:00
MichaelDvP	88f75038e0	allow txmode 0, show expected crc	2026-05-25 11:12:07 +02:00
MichaelDvP	f5bc3e82bb	formatting	2026-05-25 11:11:30 +02:00
MichaelDvP	c206f069c6	heating/cooling delays, #3096	2026-05-25 11:11:05 +02:00
MichaelDvP	6697aebc3b	Merge remote-tracking branch 'emsesp/dev' into dev	2026-05-25 09:02:41 +02:00
MichaelDvP	3d335dad27	remove trailing comma	2026-05-25 09:00:58 +02:00
Proddy	1ae547a710	Merge branch 'emsesp:dev' into dev	2026-05-19 22:33:59 +02:00
Proddy	20d6966633	Merge pull request #3087 from MichaelDvP/dev fixes for #3084 and #3086	2026-05-19 22:33:44 +02:00
MichaelDvP	d5c96f6d48	changelog	2026-05-19 22:13:30 +02:00
MichaelDvP	d1192e707d	set upload file limit to 1M again	2026-05-19 22:13:14 +02:00
Proddy	70cfbd96e2	Merge branch 'emsesp:dev' into dev	2026-05-19 12:09:53 +02:00
MichaelDvP	0dacd2c71f	don't allocate ariable size on stack	2026-05-18 20:55:57 +02:00
MichaelDvP	3962adc911	Merge remote branch “emsesp/dev”	2026-05-18 08:58:14 +02:00
MichaelDvP	0892738cd9	add KM300 #3084	2026-05-18 07:55:07 +02:00
proddy	b441fd83dd	chore: update generated files for v3.8.3-dev.1	2026-05-14 10:25:29 +00:00
proddy	ee3a5d231a	Merge remote-tracking branch 'origin/dev'	2026-05-12 20:15:32 +02:00
proddy	e8f57b6343	v3.8.1	2026-01-11 19:28:38 +01:00
proddy	a1ab81de66	Merge branch 'dev'	2026-01-11 19:14:11 +01:00
proddy	28135c225b	Merge branch 'dev'	2025-12-31 21:26:15 +01:00
proddy	eaa277fef0	v3.7.2	2025-03-22 10:32:03 +01:00
proddy	e418b7d8e7	fix routing in tabs - #2264	2024-11-30 21:31:42 +01:00
proddy	a4e3be6a69	3.7.1 changelog	2024-11-29 10:30:14 +01:00
proddy	a1bc5bb055	3.7.1	2024-11-29 10:30:05 +01:00
proddy	f444ca31e0	Merge remote-tracking branch 'origin/dev'	2024-10-27 11:41:47 +01:00
proddy	1b70b55989	update demo url	2024-08-10 14:58:48 +02:00
proddy	1487f30c43	Merge remote-tracking branch 'origin/dev' for 3.6.5	2024-03-23 17:56:05 +01:00
Proddy	e00eb8e64f	3.6.4	2023-11-26 20:11:36 +01:00
Proddy	f41bb3671c	3.6.4	2023-11-24 07:36:36 +01:00
Proddy	22c75e6df3	3.6.4	2023-11-24 07:36:29 +01:00
proddy	5ab10b7aa6	fixes #1450	2023-11-22 09:48:09 +01:00
Proddy	ee5fd4d0eb	3.6.3	2023-11-21 14:40:47 +01:00
Proddy	46f35bc67c	another patch on 3.6.3	2023-11-21 14:40:32 +01:00
Proddy	ec85a7ec24	3.6.3 (refershed)	2023-11-19 21:24:01 +01:00
Proddy	02f2389587	add workflow_dispatch:	2023-11-18 18:51:12 +01:00
Proddy	7f140021aa	quick fix - https://github.com/emsesp/EMS-ESP32/pull/1438	2023-11-18 18:47:28 +01:00
Proddy	6796962c1e	3.6.3	2023-11-18 13:35:20 +01:00
Proddy	df6de21cf4	Merge remote-tracking branch 'origin/dev'	2023-11-18 13:35:04 +01:00
Proddy	df9f75a5c9	updated yarn for 3.6.2	2023-10-01 17:42:54 +02:00
Proddy	7bd8710eb6	3.6.2	2023-10-01 17:40:09 +02:00
Proddy	32f2c6d341	Merge remote-tracking branch 'origin/dev'	2023-10-01 17:40:02 +02:00
Proddy	86919c1684	Merge branch 'origin/dev'	2023-09-09 14:12:07 +02:00
Proddy	86e29515e7	build s3	2023-08-15 18:44:24 +02:00
Proddy	46eb4185d7	update with 3.6.0	2023-08-13 14:37:13 +02:00
Proddy	8da6761a48	Merge branch 'dev'	2023-08-13 14:32:41 +02:00
Proddy	9233f0dfcc	v3.5.1 - merge with patch	2023-03-11 16:06:05 +01:00
Proddy	292f743b14	Update bug_report.md	2023-02-19 11:18:08 +01:00
Proddy	dd6dfffd57	Delete questions---troubleshooting.md	2023-02-19 10:49:52 +01:00
Proddy	ec705a5307	Delete feature_request.md	2023-02-19 10:49:45 +01:00
Proddy	f45f071710	Create config.yml	2023-02-19 10:49:32 +01:00
Proddy	f3858546de	Merge branch 'origin/dev'	2023-02-06 21:58:27 +01:00
Proddy	d0ac0b7804	update with version on dev	2022-10-30 16:58:37 +01:00
Proddy	d8284ec09f	Merge pull request #705 from MichaelDvP/main v3.4.4 Fix for new installations with filesystem not initializing	2022-10-29 10:46:41 +02:00
MichaelDvP	6e982acde8	v3.4.4 Fix for new installations with filesystem not initializing	2022-10-28 10:50:51 +02:00
Proddy	8c94ce99b2	quick fix for filesystem initialization	2022-10-08 09:23:00 +02:00
proddy	fc057d18c9	Merge remote-tracking branch 'origin/dev'	2022-09-18 14:33:23 +02:00
Proddy	18e9b99413	Merge remote-tracking branch 'origin/dev' into main	2022-05-29 16:16:38 +02:00
Proddy	a47e0e8266	update for 3.4.0	2022-05-23 21:20:45 +02:00
Proddy	f412ddc716	Merge remote-tracking branch 'origin/dev' into main	2022-05-23 21:20:36 +02:00
proddy	29110e96e5	Merge remote-tracking branch 'origin/dev'	2022-01-20 10:51:40 +01:00
proddy	b65866217a	3.4.0	2021-11-28 23:03:28 +01:00
proddy	611e3b1243	Merge remote-tracking branch 'origin/dev'	2021-11-28 23:03:15 +01:00
proddy	2ca0a0c634	v3.2.1 merged from dev	2021-08-08 14:46:14 +02:00
proddy	7eb1f061b7	Merge remote-tracking branch 'origin/dev' for 3.2.0 release	2021-08-06 12:06:08 +02:00
proddy	50459a23fe	force v16 of nodejs	2021-06-26 11:13:07 +02:00
proddy	5bf53c3389	3.1.1	2021-06-26 11:03:03 +02:00
proddy	4b7aa95be3	Merge remote-tracking branch 'origin/dev'	2021-06-26 11:02:55 +02:00
Proddy	70943f5758	Update pre_release.yml	2021-05-16 15:52:09 +02:00
Proddy	3bc280b817	Delete check_code.yml	2021-05-16 15:51:56 +02:00
Proddy	62b15a5319	Update pre_release.yml	2021-05-16 15:35:06 +02:00
Proddy	8dd18802d6	Update tagged_release.yml	2021-05-16 15:34:45 +02:00
proddy	57a516a83a	updated README and images	2021-05-09 15:13:16 +02:00
proddy	a57fdaa4b3	Merge remote-tracking branch 'origin/dev' into main	2021-05-04 12:21:51 +02:00
proddy	4841e42286	Merge remote-tracking branch 'origin/dev' into main	2021-03-30 16:35:18 +02:00
proddy	8c2d2b06ed	cleaned up old changelog	2021-03-18 20:59:09 +01:00
proddy	38c8b1b7f0	3.0.0	2021-03-18 20:58:21 +01:00
proddy	6fb5933a02	Merge remote-tracking branch 'origin/dev' into main	2021-03-18 20:58:12 +01:00
proddy	c0944433be	remove workspace.code-workspace	2021-03-16 17:41:42 +01:00
Proddy	478e6362c9	Merge pull request #27 from FauthD:main Add global names to Dallas sensors to avoid ugly <unknown> and other …	2021-03-16 17:39:00 +01:00
fauthd	4d6354db78	Add stuff to gitignore, add vscode workspace	2021-03-16 16:47:09 +01:00
fauthd	beab0f0c77	Add global names to Dallas sensors to avoid ugly <unknown> and other issues in HA	2021-03-16 16:00:23 +01:00
Proddy	c17749bd22	Update README.md	2021-03-14 23:43:33 +01:00
proddy	2bad769c5c	build: include assets	2021-03-14 21:20:51 +01:00
proddy	8ad89ca64b	move repo	2021-03-14 21:05:15 +01:00
proddy	9244d8daec	Semantic Commit Messages	2021-03-14 18:10:57 +01:00
proddy	02d01334b2	update new build	2021-03-14 17:37:18 +01:00