Merge pull request #3185 from proddy/dev

minor fixes

CHANGELOG_LATEST.md

@@ -16,6 +16,9 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 ## Fixed
 
 - shunting yard show json
+- LED stayed off on a healthy system when "Disable LED" was unchecked
+- Ethernet MAC address changed with the new SDK, breaking DHCP reservations (currently disabled)
+- "IPv4 nameserver" showed an IPv6 address when IPv6 was in use
 
 ## Changed
 
@@ -24,4 +27,6 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 - network fallback to AP only after start [#3090](https://github.com/emsesp/EMS-ESP32/issues/3090)
 - replaced Web async-validator with custom validator and toast with native snackbar to reduce bundle size
 - Gateway and Connect devices are shown in the Devices page, but disabled [3126](https://github.com/emsesp/EMS-ESP32/discussions/3126)
+- show control setting only for master thermostats (0x10) [#3173](https://github.com/emsesp/EMS-ESP32/issues/3173)
+- remove devices without entities not listed in 0x07 telegram
 

docs/Modbus-Entity-Registers.md

@@ -5966,7 +5966,6 @@ uint8
 | hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
 uint8
 | hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 uint8
 | hc1.heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | HC | 47 | 1 | 1 |
 uint8
@@ -6116,7 +6115,6 @@ uint8
 | hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
 uint8
 | hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
 uint8
@@ -6283,7 +6281,6 @@ uint8
 | hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
 uint8
 | hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
 uint8
@@ -6806,7 +6803,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -6867,7 +6863,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -6926,7 +6921,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -6985,7 +6979,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7046,7 +7039,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7107,7 +7099,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7166,7 +7157,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7227,7 +7217,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7286,7 +7275,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7345,7 +7333,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
@@ -7406,7 +7393,6 @@ uint8
 | hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
 int8
 | hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |

docs/dump_entities.csv

@@ -4436,7 +4436,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,7,1,1,41,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,7,1,1,42,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,7,1,1,43,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.control,control device,enum [RC310\|RC200\|RC100\|RC100H\|TC100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,7,1,1,47,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,7,1,1,48,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,7,1,1,49,1
@@ -4532,7 +4531,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,7,1,1,41,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,7,1,1,42,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,7,1,1,43,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.control,control device,enum [RC310\|RC200\|RC100\|RC100H\|TC100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,7,1,1,46,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,7,1,1,47,1
@@ -4639,7 +4637,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 2000/3000",thermostat,172,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,7,1,1,41,1
 "Rego 2000/3000",thermostat,172,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,7,1,1,42,1
 "Rego 2000/3000",thermostat,172,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,7,1,1,43,1
-"Rego 2000/3000",thermostat,172,hc1.control,control device,enum [RC310\|RC200\|RC100\|RC100H\|TC100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "Rego 2000/3000",thermostat,172,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "Rego 2000/3000",thermostat,172,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,7,1,1,46,1
 "Rego 2000/3000",thermostat,172,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,7,1,1,47,1
@@ -4983,7 +4980,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FW100",thermostat,105,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FW100",thermostat,105,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FW100",thermostat,105,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FW100",thermostat,105,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FW100",thermostat,105,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FW100",thermostat,105,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FW100",thermostat,105,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5022,7 +5018,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FW200",thermostat,106,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FW200",thermostat,106,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FW200",thermostat,106,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FW200",thermostat,106,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FW200",thermostat,106,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FW200",thermostat,106,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FW200",thermostat,106,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5059,7 +5054,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FR100",thermostat,107,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FR100",thermostat,107,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FR100",thermostat,107,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FR100",thermostat,107,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FR100",thermostat,107,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FR100",thermostat,107,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FR100",thermostat,107,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5096,7 +5090,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FR110",thermostat,108,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FR110",thermostat,108,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FR110",thermostat,108,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FR110",thermostat,108,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FR110",thermostat,108,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FR110",thermostat,108,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FR110",thermostat,108,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5135,7 +5128,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FB10",thermostat,109,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FB10",thermostat,109,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FB10",thermostat,109,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FB10",thermostat,109,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FB10",thermostat,109,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FB10",thermostat,109,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FB10",thermostat,109,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5174,7 +5166,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FB100",thermostat,110,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FB100",thermostat,110,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FB100",thermostat,110,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FB100",thermostat,110,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FB100",thermostat,110,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FB100",thermostat,110,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FB100",thermostat,110,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5211,7 +5202,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FR10",thermostat,111,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FR10",thermostat,111,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FR10",thermostat,111,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FR10",thermostat,111,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FR10",thermostat,111,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FR10",thermostat,111,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FR10",thermostat,111,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5250,7 +5240,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FW500",thermostat,116,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FW500",thermostat,116,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FW500",thermostat,116,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FW500",thermostat,116,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FW500",thermostat,116,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FW500",thermostat,116,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FW500",thermostat,116,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5287,7 +5276,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FR50",thermostat,147,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FR50",thermostat,147,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FR50",thermostat,147,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FR50",thermostat,147,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FR50",thermostat,147,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FR50",thermostat,147,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FR50",thermostat,147,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5324,7 +5312,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FR120",thermostat,191,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FR120",thermostat,191,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FR120",thermostat,191,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FR120",thermostat,191,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FR120",thermostat,191,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FR120",thermostat,191,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FR120",thermostat,191,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1
@@ -5363,7 +5350,6 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "FW120",thermostat,192,hc1.heattemp,heat temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_heat_temperature,number.thermostat_hc1_heattemp,7,1,1/2,205,1
 "FW120",thermostat,192,hc1.ecotemp,eco temperature,uint8 (>=0<=0),C,true,number.thermostat_hc1_eco_temperature,number.thermostat_hc1_ecotemp,7,1,1/2,5,1
 "FW120",thermostat,192,hc1.nofrosttemp,nofrost temperature,int8 (>=0<=0),C,true,number.thermostat_hc1_nofrost_temperature,number.thermostat_hc1_nofrosttemp,7,1,1/2,18,1
-"FW120",thermostat,192,hc1.control,control device,enum [off\|FB10\|FB100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,7,1,1,44,1
 "FW120",thermostat,192,hc1.program,program,enum [prog a\|prog b\|prog c\|prog d\|prog e\|prog f] (>=0<=0), ,true,select.thermostat_hc1_program,select.thermostat_hc1_program,7,1,1,27,1
 "FW120",thermostat,192,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,7,1,1/10,45,1
 "FW120",thermostat,192,hc1.targetflowtemp,target flow temperature,uint8,C,false,sensor.thermostat_hc1_target_flow_temperature,sensor.thermostat_hc1_targetflowtemp,7,1,1,19,1

interface/package.json

@@ -26,8 +26,8 @@
     "@alova/adapter-xhr": "2.3.1",
     "@emotion/react": "^11.14.0",
     "@emotion/styled": "^11.14.1",
-    "@mui/icons-material": "^9.2.0",
-    "@mui/material": "^9.2.0",
+    "@mui/icons-material": "^9.3.0",
+    "@mui/material": "^9.3.0",
     "@table-library/react-table-library": "4.1.15",
     "alova": "^3.5.3",
     "jwt-decode": "^4.0.0",
@@ -52,11 +52,11 @@
     "mime-types": "^3.0.2",
     "prettier": "^3.9.6",
     "rollup-plugin-visualizer": "^7.0.1",
-    "terser": "^5.49.0",
+    "terser": "^5.49.1",
     "typescript": "^6.0.3",
-    "typescript-eslint": "^8.65.0",
+    "typescript-eslint": "^8.66.0",
     "vite": "^8.2.0",
     "vite-plugin-imagemin": "^0.6.1"
   },
-  "packageManager": "pnpm@11.18.0+sha512.33d83c77da82f49fba836925c6f1b841181ec3132b670639bd012f7075f5c7cf634c5f870147c19aae7478fac01df09d8892e880454896edd23ee9b33757563c"
+  "packageManager": "pnpm@11.20.0+sha512.9a6f330a95b66446ea088faf1521405a8a01f07fde7124cc9958dfed52d4bb436737e65b08f85f37b46fcba375092558ac51262b816844b22f63406ed166bfee"
 }

interface/vite.config.ts

@@ -2,6 +2,7 @@ import preact from '@preact/preset-vite';
 import fs from 'fs';
 import path from 'path';
 import { visualizer } from 'rollup-plugin-visualizer';
+import { pathToFileURL } from 'url';
 import { Plugin, PluginOption, defineConfig } from 'vite';
 import viteImagemin from 'vite-plugin-imagemin';
 import zlib from 'zlib';
@@ -178,24 +179,20 @@ const createProductionTerserOptions = () => ({
   toplevel: true
 });
 
-// Image optimization plugin
+// Image optimization plugin.
+// Only svgo runs here: the raster optimizers (optipng, pngquant, gifsicle,
+// jpegtran, mozjpeg) are native binaries whose install scripts are blocked by
+// `allowBuilds` in pnpm-workspace.yaml, so they would fail on every build.
+// Raster assets are committed pre-optimized instead.
 const imageOptimizationPlugin = {
   ...viteImagemin({
     verbose: false,
-    gifsicle: {
-      optimizationLevel: 7,
-      interlaced: false
-    },
-    optipng: {
-      optimizationLevel: 7
-    },
-    mozjpeg: {
-      quality: 20
-    },
-    pngquant: {
-      quality: [0.8, 0.9],
-      speed: 4
-    },
+    filter: /\.svg$/i,
+    gifsicle: false,
+    jpegTran: false,
+    mozjpeg: false,
+    optipng: false,
+    pngquant: false,
     svgo: {
       plugins: [
         { name: 'removeViewBox' },
@@ -210,8 +207,15 @@ export default defineConfig(
   async ({ command, mode }: { command: string; mode: string }) => {
     if (command === 'serve') {
       console.log(`Preparing for standalone build with server, mode=${mode}`);
-      // @ts-expect-error - mock server doesn't have type declarations
-      const { default: mockServer } = await import('../mock-api/mockServer.js');
+      // Imported through a computed URL so the config bundler leaves it as a real
+      // runtime import: mock-api is a separate package with its own node_modules,
+      // and inlining it here would drag its dependencies into every build.
+      const mockServerUrl = pathToFileURL(
+        path.resolve(import.meta.dirname, '../mock-api/mockServer.js')
+      ).href;
+      const { default: mockServer } = (await import(
+        /* @vite-ignore */ mockServerUrl
+      )) as { default: () => PluginOption };
       return {
         plugins: [...createBasePlugins(true, true), mockServer()],
         resolve: {

mock-api/package.json

@@ -18,5 +18,5 @@
     "@trivago/prettier-plugin-sort-imports": "^6.0.2",
     "prettier": "^3.9.6"
   },
-  "packageManager": "pnpm@11.18.0+sha512.33d83c77da82f49fba836925c6f1b841181ec3132b670639bd012f7075f5c7cf634c5f870147c19aae7478fac01df09d8892e880454896edd23ee9b33757563c"
+  "packageManager": "pnpm@11.20.0+sha512.9a6f330a95b66446ea088faf1521405a8a01f07fde7124cc9958dfed52d4bb436737e65b08f85f37b46fcba375092558ac51262b816844b22f63406ed166bfee"
 }

src/core/analogsensor.cpp

@@ -102,7 +102,7 @@ void AnalogSensor::start(const bool factory_settings) {
     Command::add(
         EMSdevice::DeviceType::ANALOGSENSOR,
         F_(setvalue),
-        [&](const char * value, const int8_t id, JsonObject output) { return command_setvalue(value, id); },
+        [&](const char * value, const int8_t id, JsonObject) { return command_setvalue(value, id); },
         FL_(setiovalue_cmd),
         CommandFlag::ADMIN_ONLY);
 
@@ -195,7 +195,7 @@ void AnalogSensor::reload(bool get_nvs) {
                 Command::add(
                     EMSdevice::DeviceType::ANALOGSENSOR,
                     sensor.name,
-                    [&](const char * value, const int8_t id, JsonObject output) { return command_setvalue(value, sensor.gpio); },
+                    [&](const char * value, const int8_t, JsonObject) { return command_setvalue(value, sensor.gpio); },
                     sensor.type == AnalogType::COUNTER || (sensor.type >= AnalogType::CNT_0 && sensor.type <= AnalogType::CNT_2) ? FL_(counter)
                     : sensor.type == AnalogType::DIGITAL_OUT                                                                     ? FL_(digital_out)
                     : sensor.type == AnalogType::RGB                                                                             ? FL_(RGB)

src/core/console.cpp

@@ -104,7 +104,7 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
                 shell.printfln("Unknown show command");
             }
         },
-        [](Shell const & shell, const std::vector<std::string> & current_arguments, const std::string & next_argument) -> std::vector<std::string> {
+        [](Shell const &, const std::vector<std::string> &, const std::string &) -> std::vector<std::string> {
             return std::vector<std::string>{"system", "users", "devices", "log", "ems", "values", "mqtt", "commands"};
         });
 
@@ -191,7 +191,7 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
                           CommandFlags::ADMIN,
                           {F_(restart)},
                           {F_(partitionname_optional)},
-                          [](Shell & shell, const std::vector<std::string> & arguments) {
+                          [](Shell &, const std::vector<std::string> & arguments) {
                               if (arguments.size()) {
                                   EMSESP::system_.system_restart(arguments.front().c_str());
                               } else {
@@ -202,7 +202,7 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
     commands->add_command(ShellContext::MAIN,
                           CommandFlags::ADMIN,
                           string_vector{F_(wifi), F_(reconnect)},
-                          [](Shell & shell, const std::vector<std::string> & arguments) { EMSESP::network_.reconnect(); });
+                          [](Shell &, const std::vector<std::string> &) { EMSESP::network_.reconnect(); });
 
     //
     // SET commands
@@ -244,7 +244,7 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
     commands->add_command(ShellContext::MAIN,
                           CommandFlags::ADMIN,
                           string_vector{F_(set), F_(wifi), F_(password)},
-                          [](Shell & shell, const std::vector<std::string> & arguments) {
+                          [](Shell & shell, const std::vector<std::string> &) {
                               shell.enter_password(F_(new_password_prompt1), [](Shell & shell, bool completed, const std::string & password1) {
                                   if (completed) {
                                       shell.enter_password(F_(new_password_prompt2), [password1](Shell & shell, bool completed, const std::string & password2) {
@@ -367,7 +367,7 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
     // EMS device commands
     //
 
-    commands->add_command(ShellContext::MAIN, CommandFlags::ADMIN, {F_(scan)}, [](Shell & shell, const std::vector<std::string> & arguments) {
+    commands->add_command(ShellContext::MAIN, CommandFlags::ADMIN, {F_(scan)}, [](Shell &, const std::vector<std::string> &) {
         EMSESP::scan_devices();
     });
 

src/core/emsdevice.cpp

@@ -693,6 +693,10 @@ void EMSdevice::erase_device_values() {
         }
     }
     devicevalues_.clear();
+    telegram_functions_.clear();
+    handlers_ignored_.clear();
+    handlers_config_.clear();
+    handlers_broadcasted_.clear();
 }
 
 // single list of options

src/core/emsesp.cpp

@@ -173,12 +173,25 @@ uint8_t EMSESP::device_id_from_cmd(const uint8_t device_type, const char * cmd,
     return 0;
 }
 
-// clears list of recognized devices
-void EMSESP::clear_all_devices() {
-    // temporarily removed: clearing the list causes a crash, the associated commands and mqtt should also be removed.
-    // emsdevices.clear(); // remove entries, but doesn't delete actual devices
+// remove a single device with all it's entities, commands, and telegrams
+void EMSESP::erase_device(const uint8_t type_id) {
+    for (auto it = emsdevices.begin(); it < emsdevices.end(); it++) {
+        if ((*it)->device_id() == type_id) {
+            (*it)->erase_device_values();
+            emsdevices.erase(it);
+            break;
+        }
+    }
 }
 
+ // clears list of recognized devices, entities and telegrams
+ void EMSESP::clear_all_devices() {
+    for (auto & emsdevice : emsdevices) {
+        emsdevice->erase_device_values();
+    }
+    emsdevices.clear();
+ }
+
 // called from EMSdevice/Command whenever an entity or telegram handler is registered.
 // Devices reserve their value/telegram vectors generously (to avoid realloc storms while
 // heating circuits etc. are discovered incrementally), so once registration settles we
@@ -1027,10 +1040,13 @@ void EMSESP::process_UBADevices(const std::shared_ptr<const Telegram> & telegram
             if (next_byte & 0x01) {
                 // if we haven't already detected this device, request it's version details, unless its us (EMS-ESP)
                 // when the version info is received, it will automagically add the device
-                if ((device_id != EMSbus::ems_bus_id()) && !(EMSESP::device_exists(device_id))) {
+                if ((device_id != EMSbus::ems_bus_id()) && !(device_exists(device_id))) {
                     LOG_DEBUG("New EMS device detected with ID 0x%02X. Requesting version information.", device_id);
                     send_read_request(EMSdevice::EMS_TYPE_VERSION, device_id);
                 }
+            } else if (device_exists(device_id) && !device_hasEntities(device_id)) {
+                LOG_DEBUG("Remove EMS device with ID 0x%02X", device_id);
+                erase_device(device_id); // 
             }
             next_byte = next_byte >> 1; // advance 1 bit
         }
@@ -1237,6 +1253,15 @@ bool EMSESP::process_telegram(const std::shared_ptr<const Telegram> & telegram)
     return telegram_found;
 }
 
+bool EMSESP::device_hasEntities(const uint8_t device_id) {
+    for (const auto & emsdevice : emsdevices) {
+        if (emsdevice->is_device_id(device_id) && (emsdevice->count_entities() > 0)) {
+            return true;
+        }
+    }
+    return false; // not found
+}
+
 // return true if we have this device already registered
 bool EMSESP::device_exists(const uint8_t device_id) {
     if (emsdevices.empty()) {

src/core/emsesp.h

@@ -152,6 +152,7 @@ class EMSESP {
     static void send_write_request(const uint16_t type_id, const uint8_t dest, const uint8_t offset, const uint8_t value);
     static void send_write_request(const uint16_t type_id, const uint8_t dest, const uint8_t offset, const uint8_t value, const uint16_t validate_typeid);
 
+    static bool    device_hasEntities(const uint8_t device_id);
     static bool    device_exists(const uint8_t device_id);
     static void    device_active(const uint8_t device_id, const bool active);
     static bool    cmd_is_readonly(const uint8_t device_type, const uint8_t device_id, const char * cmd, const int8_t id);
@@ -238,6 +239,7 @@ class EMSESP {
 
     static bool add_device(const uint8_t device_id, const uint8_t product_id, const char * version, const uint8_t brand);
     static void scan_devices();
+    static void erase_device(const uint8_t type_id);
     static void clear_all_devices();
 
     // called whenever a device entity or telegram handler is registered, so we can

src/core/led.cpp

@@ -59,11 +59,16 @@ bool LED::loop(uint8_t healthcheck, bool button_busy) {
     // the user-requested LED blink always has preference
     if (!is_user_led_blink_) {
         // check for button press.
-        // if button is pressed, show LED (yellow on RGB LED, on/off on standard LED)
-        // it will turn off on the next loop cycle
+        // while the button is held show the LED (yellow on RGB LED, on/off on standard LED),
+        // and on release go back to the default state and re-check the health on the next cycle
         if (last_button_busy_ != button_busy) {
             last_button_busy_ = button_busy;
-            set_led(button_busy ? Color::OFF : Color::YELLOW); // Yellow
+            if (button_busy) {
+                set_led(Color::YELLOW); // Yellow
+            } else {
+                reset_led();
+                previous_healthcheck_ = System::HEALTHCHECK_RESET;
+            }
             return false;
         }
 
@@ -104,6 +109,12 @@ bool LED::loop(uint8_t healthcheck, bool button_busy) {
                 color_steps_[2] = Color::BLUE; // blue, no network and no bus
             }
         }
+
+        // there's nothing to flash, so leave the LED in the state reset_led() gave it.
+        // Running the sequence here would keep writing Color::OFF and a healthy system would never show green.
+        if (healthcheck == 0 || button_busy) {
+            return false;
+        }
     }
 
     // show the LED status based on the healthcheck and button busy status
@@ -119,6 +130,11 @@ void LED::reset_led() {
     color_steps_[0] = Color::OFF;
     color_steps_[1] = Color::OFF;
     color_steps_[2] = Color::OFF;
+
+    // rewind the sequence so it starts from the top if the health degrades again
+    led_long_timer_  = 1; // 1 will kick it off immediately
+    led_short_timer_ = 0;
+    led_flash_step_  = 0;
 }
 
 // LED flash every few ms and then perform a factory reset
@@ -313,4 +329,4 @@ void LED::start_led_fast_flash(uint8_t duration) {
     led_fast_flash_timer_ = true;                      // it's active
 }
 
-} // namespace emsesp
+} // namespace emsesp

src/core/network.cpp

@@ -82,7 +82,13 @@ void Network::begin() {
     WiFi.persistent(false);
     WiFi.setAutoReconnect(false);
     WiFi.mode(WIFI_STA);
-    WiFi.disconnect(true, true); // wipe old settings in NVS. Will give a warning on boot but can be ignored.
+
+    if (WiFi.STA.started()) {
+        WiFi.disconnect(true, true); // wipe old settings; only when STA is up
+    } else {
+        WiFi.disconnect(true, false); // disconnect/off without erase, so no warning is shown
+    }
+
     WiFi.setScanMethod(WIFI_ALL_CHANNEL_SCAN);
     WiFi.setHostname(hostname_.c_str());     // updates shared default_hostname buffer
     WiFi.enableSTA(true);                    // creates the STA netif
@@ -152,7 +158,7 @@ void Network::begin() {
 }
 
 // format the BSSID (MAC address) of the network interface
-bool Network::formatBSSID(const String & bssid, uint8_t (&mac)[6]) {
+bool Network::formatBSSID([[maybe_unused]] const String & bssid, [[maybe_unused]] uint8_t (&mac)[6]) {
 #ifndef EMSESP_STANDALONE
     uint tmp[6];
     if (bssid.isEmpty() || sscanf(bssid.c_str(), "%X:%X:%X:%X:%X:%X", &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]) != 6) {
@@ -331,7 +337,7 @@ void Network::checkConnection() {
 //  802.11ac - wifi5
 //  802.11ax - wifi6
 // tx_power is the Tx power to set, 0 for auto
-void Network::setWiFiPower(uint8_t tx_power) {
+void Network::setWiFiPower([[maybe_unused]] uint8_t tx_power) {
 #ifndef EMSESP_STANDALONE
     if (tx_power != 0) {
         if (!WiFi.setTxPower(static_cast<wifi_power_t>(tx_power))) {
@@ -413,7 +419,7 @@ void Network::startmDNS() const {
 }
 
 // WiFi disconnect reason code to string
-const char * Network::disconnectReason(uint8_t code) {
+const char * Network::disconnectReason([[maybe_unused]] uint8_t code) {
 #ifndef EMSESP_STANDALONE
     switch (code) {
     case WIFI_REASON_UNSPECIFIED: // = 1,
@@ -539,6 +545,17 @@ void Network::startEthernet() {
         return;
     }
 
+    /*
+    // The Tasmota SDK is built with CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=2, so the Ethernet MAC is derived as
+    // a locally-administered address from base+1 instead of the universal base+3 that Arduino Core 2 used.
+    // Seed the MAC table with the old value before the EMAC driver reads it, so DHCP reservations survive an upgrade.
+    uint8_t eth_mac[6];
+    if (esp_read_mac(eth_mac, ESP_MAC_BASE) == ESP_OK) {
+        eth_mac[5] += 3;
+        esp_iface_mac_addr_set(eth_mac, ESP_MAC_ETH);
+    }
+    */
+
     // reset power and add a delay as ETH doesn't not always start up correctly after a warm boot
     if (eth_power_ != -1) {
         pinMode(eth_power_, OUTPUT);

src/core/network.h

@@ -20,6 +20,7 @@
 #define EMSESP_NETWORK_H_
 
 #ifndef EMSESP_STANDALONE
+#include <esp_mac.h>
 #include <esp_wifi.h>
 #include <ETH.h>
 #include <WiFi.h>

src/core/system.cpp

@@ -93,6 +93,20 @@ uint32_t System::min_free_mem_;
 std::vector<uint8_t, AllocatorPSRAM<uint8_t>>                     System::valid_system_gpios_;
 std::vector<System::GpioUsage, AllocatorPSRAM<System::GpioUsage>> System::used_gpios_;
 
+#ifndef EMSESP_STANDALONE
+// The DNS slots are shared between IPv4 and IPv6, so with IPv6 enabled the first slot can hold an
+// IPv6 server. Pick the first IPv4 one so it matches the label we print it under.
+static IPAddress dns_ipv4(const NetworkInterface & netif) {
+    for (uint8_t i = 0; i < ESP_NETIF_DNS_MAX; i++) {
+        IPAddress ip = netif.dnsIP(i);
+        if (ip.type() == IPv4 && static_cast<uint32_t>(ip) != 0) {
+            return ip;
+        }
+    }
+    return IPAddress();
+}
+#endif
+
 // find the index of the language
 // 0 = EN, 1 = DE, etc...
 uint8_t System::language_index() {
@@ -110,7 +124,7 @@ bool System::command_send(const char * value, const int8_t id) {
 }
 
 // send email via SMTP
-bool System::command_sendmail(const char * value, const int8_t id) {
+bool System::command_sendmail(const char * value, const int8_t) {
     bool     enabled = false;
     uint8_t  security;
     uint16_t port;
@@ -487,7 +501,7 @@ void System::set_partition_install_date() {
 }
 
 // sets the partition to use on the next restart
-bool System::set_partition(const char * partitionname) {
+bool System::set_partition([[maybe_unused]] const char * partitionname) {
 #ifdef EMSESP_STANDALONE
     return true;
 #else
@@ -858,8 +872,7 @@ void System::send_info_mqtt() {
         doc["MAC"]             = WiFi.macAddress();
         doc["IPv4 address"]    = uuid::printable_to_string(WiFi.localIP()) + "/" + uuid::printable_to_string(WiFi.subnetMask());
         doc["IPv4 gateway"]    = uuid::printable_to_string(WiFi.gatewayIP());
-        doc["IPv4 nameserver"] = uuid::printable_to_string(WiFi.dnsIP());
-
+        doc["IPv4 DNS Server"] = uuid::printable_to_string(dns_ipv4(WiFi.STA));
         if (WiFi.linkLocalIPv6().toString() != "0000:0000:0000:0000:0000:0000:0000:0000" && WiFi.linkLocalIPv6().toString() != "::") {
             doc["IPv6 address"] = uuid::printable_to_string(WiFi.linkLocalIPv6());
         }
@@ -1168,7 +1181,7 @@ void System::show_system(uuid::console::Shell & shell) {
         shell.printfln(" Hostname: %s", WiFi.getHostname());
         shell.printfln(" IPv4 address: %s/%s", uuid::printable_to_string(WiFi.localIP()).c_str(), uuid::printable_to_string(WiFi.subnetMask()).c_str());
         shell.printfln(" IPv4 gateway: %s", uuid::printable_to_string(WiFi.gatewayIP()).c_str());
-        shell.printfln(" IPv4 nameserver: %s", uuid::printable_to_string(WiFi.dnsIP()).c_str());
+        shell.printfln(" IPv4 DNS Server: %s", uuid::printable_to_string(dns_ipv4(WiFi.STA)).c_str());
         if (WiFi.linkLocalIPv6().toString() != "0000:0000:0000:0000:0000:0000:0000:0000" && WiFi.linkLocalIPv6().toString() != "::") {
             shell.printfln(" IPv6 address: %s", uuid::printable_to_string(WiFi.linkLocalIPv6()).c_str());
         }
@@ -1201,7 +1214,7 @@ void System::show_system(uuid::console::Shell & shell) {
         shell.printfln(" Hostname: %s", ETH.getHostname());
         shell.printfln(" IPv4 address: %s/%s", uuid::printable_to_string(ETH.localIP()).c_str(), uuid::printable_to_string(ETH.subnetMask()).c_str());
         shell.printfln(" IPv4 gateway: %s", uuid::printable_to_string(ETH.gatewayIP()).c_str());
-        shell.printfln(" IPv4 nameserver: %s", uuid::printable_to_string(ETH.dnsIP()).c_str());
+        shell.printfln(" IPv4 DNS Server: %s", uuid::printable_to_string(dns_ipv4(ETH)).c_str());
         if (ETH.linkLocalIPv6().toString() != "0000:0000:0000:0000:0000:0000:0000:0000" && ETH.linkLocalIPv6().toString() != "::") {
             shell.printfln(" IPv6 address: %s", uuid::printable_to_string(ETH.linkLocalIPv6()).c_str());
         }
@@ -1694,7 +1707,7 @@ static const std::pair<const char *, const char *> SECTION_MAP[] = {
 #endif
 
 // convert a single config file into a section of the output json object
-void System::exportSettings(const std::string & type, const char * filename, JsonObject output) {
+void System::exportSettings(const std::string & type, [[maybe_unused]] const char * filename, JsonObject output) {
     if (type != "settings") {
         output["type"] = type; // add the type to the output, not for settings as it's already added because its grouped
     }
@@ -1849,7 +1862,7 @@ void System::exportSystemBackup(JsonObject output) {
 }
 
 // write a settings file using input from a json object, called from upload/restore
-bool System::saveSettings(const char * filename, JsonObject input) {
+bool System::saveSettings([[maybe_unused]] const char * filename, [[maybe_unused]] JsonObject input) {
 #ifndef EMSESP_STANDALONE
     const char * section = nullptr;
     for (const auto & [f, label] : SECTION_MAP) {
@@ -2819,7 +2832,7 @@ bool System::load_board_profile(std::vector<int8_t> & data, const std::string &
 //  rgb for RGB
 // For example: /api/system/led?data=red:blink1
 // For older non-RGB models, the colour would default to just being on.
-bool System::command_led(const char * value, const int8_t id) {
+bool System::command_led(const char * value, const int8_t) {
     if (!value) {
         return false; // no argument
     }
@@ -2842,7 +2855,7 @@ bool System::command_led(const char * value, const int8_t id) {
 }
 
 // txpause command - temporarily pause the TX, by setting Txmode to 0 (disabled)
-bool System::command_txpause(const char * value, const int8_t id) {
+bool System::command_txpause(const char * value, const int8_t) {
     bool arg;
     if (!Helpers::value2bool(value, arg)) {
         return false; // argument not recognized
@@ -2985,7 +2998,7 @@ bool System::ntp_connected() {
 }
 
 // see if its a BBQKees Gateway by checking the eFuse values
-String System::getBBQKeesGatewayDetails(uint8_t detail) {
+String System::getBBQKeesGatewayDetails([[maybe_unused]] uint8_t detail) {
 #ifndef EMSESP_STANDALONE
     union {
         struct {
@@ -3401,7 +3414,7 @@ bool System::readCommand(const char * data) {
 }
 
 // system read command
-bool System::command_read(const char * value, const int8_t id) {
+bool System::command_read(const char * value, const int8_t) {
     return readCommand(value);
 }
 
@@ -3696,7 +3709,7 @@ void System::restore_snapshot_gpios(std::vector<int8_t> & u_gpios, std::vector<i
 }
 
 // show the contents of a directory in the LittleFS filesystem
-void System::listDir(const char * dirname, uint8_t levels) {
+void System::listDir([[maybe_unused]] const char * dirname, [[maybe_unused]] uint8_t levels) {
 #if defined(EMSESP_DEBUG)
 #ifndef EMSESP_STANDALONE
 

src/devices/boiler.cpp

@@ -1822,7 +1822,7 @@ void Boiler::process_HpPool(const std::shared_ptr<const Telegram> & telegram) {
 // Boiler(0x08) -> All(0x00), ?(0x04A2), data: 02 01 01 00 01 00
 // Boiler(0x08) -W-> Me(0x0B), HpInput(0x04A2), data: 20 07 06 01 00 (from #802)
 // see https://github.com/emsesp/EMS-ESP32/issues/2844#issuecomment-3689049155
-void Boiler::process_HpInput(const std::shared_ptr<const Telegram> & telegram) {
+void Boiler::process_HpInput(const std::shared_ptr<const Telegram> &) {
 }
 
 // Heatpump inputs settings- type 0x486 (https://github.com/emsesp/EMS-ESP32/issues/600)
@@ -1923,7 +1923,7 @@ void Boiler::process_UBASetPoints2(const std::shared_ptr<const Telegram> & teleg
 }
 
 // 0x35 - not yet implemented, not readable, only for settings
-void Boiler::process_UBAFlags(const std::shared_ptr<const Telegram> & telegram) {
+void Boiler::process_UBAFlags(const std::shared_ptr<const Telegram> &) {
 }
 
 // 0x1C
@@ -1942,7 +1942,7 @@ void Boiler::process_UBAMaintenanceStatus(const std::shared_ptr<const Telegram>
 }
 
 // 0xBF
-void Boiler::process_ErrorMessage(const std::shared_ptr<const Telegram> & telegram) {
+void Boiler::process_ErrorMessage(const std::shared_ptr<const Telegram> &) {
     EMSESP::send_read_request(0xC2, device_id(), 0, 20); // read last errorcode
     EMSESP::send_read_request(0xC6, device_id(), 0, 21); // read last errorcode
 }
@@ -2494,7 +2494,7 @@ bool Boiler::set_ww_disinfect_temp(const char * value, const int8_t id) {
 }
 
 // Set the dhw priority
-bool Boiler::set_ww_prio(const char * value, const int8_t id) {
+bool Boiler::set_ww_prio(const char * value, const int8_t) {
     bool b;
     if (!Helpers::value2bool(value, b)) {
         return false;
@@ -2814,7 +2814,7 @@ bool Boiler::set_pump_delay(const char * value, const int8_t id) {
 }
 
 // set pump logic temperature
-bool Boiler::set_pumpOnTemp(const char * value, const int8_t id) {
+bool Boiler::set_pumpOnTemp(const char * value, const int8_t) {
     int v;
     if (!Helpers::value2temperature(value, v)) {
         return false;
@@ -3037,7 +3037,7 @@ bool Boiler::set_reset(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_manDefrost(const char * value, const int8_t id) {
+bool Boiler::set_manDefrost(const char * value, const int8_t) {
     bool b;
     if (!Helpers::value2bool(value, b)) {
         return false;
@@ -3046,7 +3046,7 @@ bool Boiler::set_manDefrost(const char * value, const int8_t id) {
     return true;
 }
 
-bool Boiler::set_chimneysweeper(const char * value, const int8_t id) {
+bool Boiler::set_chimneysweeper(const char * value, const int8_t) {
     bool b;
     if (!Helpers::value2bool(value, b)) {
         return false;
@@ -3325,7 +3325,7 @@ bool Boiler::set_auxLimit(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_auxHeaterSource(const char * value, const int8_t id) {
+bool Boiler::set_auxHeaterSource(const char * value, const int8_t) {
     uint8_t v;
     if (Helpers::value2enum(value, v, FL_(enum_auxHeaterSource))) {
         write_command(0x491, 0, v, 0x491);
@@ -3409,7 +3409,7 @@ bool Boiler::set_hpMaxPower(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_pvMaxComp(const char * value, const int8_t id) {
+bool Boiler::set_pvMaxComp(const char * value, const int8_t) {
     float v;
     if (Helpers::value2float(value, v)) {
         write_command(0x484, 54, (uint8_t)(v * 10), 0x484);
@@ -3437,7 +3437,7 @@ bool Boiler::set_hpPowerLimit(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_powerReduction(const char * value, const int8_t id) {
+bool Boiler::set_powerReduction(const char * value, const int8_t) {
     int v;
     if (Helpers::value2number(value, v)) {
         write_command(0x484, 64, v / 10, 0x484);
@@ -3661,7 +3661,7 @@ bool Boiler::set_shutdown(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_pumpKickHour(const char * value, const int8_t id) {
+bool Boiler::set_pumpKickHour(const char * value, const int8_t) {
     int v;
     if (Helpers::value2number(value, v, 0, 23)) {
         write_command(0xEB, 0, v, 0xEB);
@@ -3670,7 +3670,7 @@ bool Boiler::set_pumpKickHour(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_pumpKickDay(const char * value, const int8_t id) {
+bool Boiler::set_pumpKickDay(const char * value, const int8_t) {
     uint8_t v;
     if (Helpers::value2enum(value, v, FL_(enum_dayOfWeek))) {
         write_command(0xEB, 1, v + 1, 0xEB);
@@ -3679,7 +3679,7 @@ bool Boiler::set_pumpKickDay(const char * value, const int8_t id) {
     return false;
 }
 
-bool Boiler::set_pumpKickDelay(const char * value, const int8_t id) {
+bool Boiler::set_pumpKickDelay(const char * value, const int8_t) {
     int v;
     if (Helpers::value2number(value, v, 0, 32767)) {
         uint8_t data[2] = {(uint8_t)(v >> 8), (uint8_t)v};

src/devices/mixer.cpp

@@ -278,7 +278,7 @@ bool Mixer::set_flowTempOffset(const char * value, const int8_t id) {
     return false;
 }
 
-bool Mixer::set_pressure(const char * value, const int8_t id) {
+bool Mixer::set_pressure(const char * value, const int8_t) {
     int v;
     if (!Helpers::value2number(value, v)) {
         return false;
@@ -288,7 +288,7 @@ bool Mixer::set_pressure(const char * value, const int8_t id) {
     return true;
 }
 
-bool Mixer::set_wwprio(const char * value, const int8_t id) {
+bool Mixer::set_wwprio(const char * value, const int8_t) {
     bool b;
     if (!Helpers::value2bool(value, b)) {
         return false;

src/devices/solar.cpp

@@ -1122,7 +1122,7 @@ bool Solar::set_diffControl(const char * value, const int8_t id) {
     return true;
 }
 
-bool Solar::set_solarHeatAssistOn(const char * value, const int8_t id) {
+bool Solar::set_solarHeatAssistOn(const char * value, const int8_t) {
     float t;
     if (!Helpers::value2float(value, t)) {
         return false;
@@ -1131,7 +1131,7 @@ bool Solar::set_solarHeatAssistOn(const char * value, const int8_t id) {
     return true;
 }
 
-bool Solar::set_solarHeatAssistOff(const char * value, const int8_t id) {
+bool Solar::set_solarHeatAssistOff(const char * value, const int8_t) {
     float t;
     if (!Helpers::value2float(value, t)) {
         return false;

src/devices/thermostat.cpp

@@ -1663,32 +1663,40 @@ void Thermostat::process_RC35Timer(const std::shared_ptr<const Telegram> & teleg
     has_update(telegram, hc->pause, 85);   // time in hours
     has_update(telegram, hc->party, 86);   // time in hours
 
-    if (telegram->message_length + telegram->offset >= 92 && telegram->offset <= 87) {
-        char data[sizeof(hc->vacation) + 4]; // avoid compiler warning
-        snprintf(data,
-                 sizeof(data),
-                 "%02d.%02d.%04d-%02d.%02d.%04d",
-                 telegram->message_data[87 - telegram->offset],
-                 telegram->message_data[88 - telegram->offset],
-                 telegram->message_data[89 - telegram->offset] + 2000,
-                 telegram->message_data[90 - telegram->offset],
-                 telegram->message_data[91 - telegram->offset],
-                 telegram->message_data[92 - telegram->offset] + 2000);
-        has_update(hc->vacation, data, sizeof(hc->vacation));
+    // vacation dates are in positions 87 to 92
+    if (telegram->offset <= 87 && (telegram->offset + telegram->message_length) > 92) {
+        const uint8_t pos = 87 - telegram->offset;
+        if ((pos + 5) < EMS_MAX_TELEGRAM_MESSAGE_LENGTH) {
+            char data[sizeof(hc->vacation) + 4]; // avoid compiler warning
+            snprintf(data,
+                     sizeof(data),
+                     "%02d.%02d.%04d-%02d.%02d.%04d",
+                     telegram->message_data[pos],
+                     telegram->message_data[pos + 1],
+                     telegram->message_data[pos + 2] + 2000,
+                     telegram->message_data[pos + 3],
+                     telegram->message_data[pos + 4],
+                     telegram->message_data[pos + 5] + 2000);
+            has_update(hc->vacation, data, sizeof(hc->vacation));
+        }
     }
 
-    if (telegram->message_length + telegram->offset >= 98 && telegram->offset <= 93) {
-        char data[sizeof(hc->holiday) + 4]; // avoid compiler warning
-        snprintf(data,
-                 sizeof(data),
-                 "%02d.%02d.%04d-%02d.%02d.%04d",
-                 telegram->message_data[93 - telegram->offset],
-                 telegram->message_data[94 - telegram->offset],
-                 telegram->message_data[95 - telegram->offset] + 2000,
-                 telegram->message_data[96 - telegram->offset],
-                 telegram->message_data[97 - telegram->offset],
-                 telegram->message_data[98 - telegram->offset] + 2000);
-        has_update(hc->holiday, data, sizeof(hc->holiday));
+    // holiday dates are in positions 93 to 98
+    if (telegram->offset <= 93 && (telegram->offset + telegram->message_length) > 98) {
+        const uint8_t pos = 93 - telegram->offset;
+        if ((pos + 5) < EMS_MAX_TELEGRAM_MESSAGE_LENGTH) {
+            char data[sizeof(hc->holiday) + 4]; // avoid compiler warning
+            snprintf(data,
+                     sizeof(data),
+                     "%02d.%02d.%04d-%02d.%02d.%04d",
+                     telegram->message_data[pos],
+                     telegram->message_data[pos + 1],
+                     telegram->message_data[pos + 2] + 2000,
+                     telegram->message_data[pos + 3],
+                     telegram->message_data[pos + 4],
+                     telegram->message_data[pos + 5] + 2000);
+            has_update(hc->holiday, data, sizeof(hc->holiday));
+        }
     }
 }
 
@@ -1862,7 +1870,7 @@ void Thermostat::process_RCErrorMessage(const std::shared_ptr<const Telegram> &
 }
 
 // 0xBF
-void Thermostat::process_ErrorMessageBF(const std::shared_ptr<const Telegram> & telegram) {
+void Thermostat::process_ErrorMessageBF(const std::shared_ptr<const Telegram> &) {
     EMSESP::send_read_request(0xC0, device_id(), 0, 20); // read last errorcode
 }
 
@@ -2338,7 +2346,7 @@ bool Thermostat::set_damping(const char * value, const int8_t id) {
 }
 
 // 0x0241- Set solar
-bool Thermostat::set_solar(const char * value, const int8_t id) {
+bool Thermostat::set_solar(const char * value, const int8_t) {
     bool b;
     if (Helpers::value2bool(value, b)) {
         if (model() == EMSdevice::EMS_DEVICE_FLAG_RC100) {
@@ -3034,7 +3042,7 @@ bool Thermostat::set_party(const char * value, const int8_t id) {
     return true;
 }
 
-bool Thermostat::set_absent(const char * value, const int8_t id) {
+bool Thermostat::set_absent(const char * value, const int8_t) {
     bool b;
     if (Helpers::value2bool(value, b)) {
         write_command(0x16E, 0, b ? 0xFF : 0, 0x16E);
@@ -5172,7 +5180,7 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
             register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control2), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
         } else if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
             register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control3), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
-        } else {
+        } else if (device_id() == 0x10) { // only master thermostats have control by remote
             register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control1), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
         }
         if (model != EMSdevice::EMS_DEVICE_FLAG_RC100 && model != EMSdevice::EMS_DEVICE_FLAG_CR120) {
@@ -5476,7 +5484,9 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
                               FL_(nofrosttemp),
                               DeviceValueUOM::DEGREES,
                               MAKE_CF_CB(set_nofrosttemp));
-        register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_j_control), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
+        if (device_id() == 0x10) { // only master thermostats have control by remote
+            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_j_control), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
+        }
         register_device_value(tag, &hc->program, DeviceValueType::ENUM, FL_(enum_progMode4), FL_(program), DeviceValueUOM::NONE, MAKE_CF_CB(set_program));
         register_device_value(tag,
                               &hc->remotetemp,

src/devices/ventilation.cpp

@@ -87,7 +87,7 @@ void Ventilation::process_ModeMessage(const std::shared_ptr<const Telegram> & te
 }
 
 // message 0x0587, data: 00 00 64 00 64 0A 00 01 54 01 00 01 00 00 00 46 00 00 00 02 00 A3 00 A3
-void Ventilation::process_BypassMessage(const std::shared_ptr<const Telegram> & telegram) {
+void Ventilation::process_BypassMessage(const std::shared_ptr<const Telegram> &) {
     // has_update(telegram, bypass_closing, 0);
     // has_update(telegram, bypass_opening, 1);
 }

src/emsesp_version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.9.0-dev.0"
+#define EMSESP_APP_VERSION "3.9.0-dev.1"

src/web/WebCommandService.cpp

@@ -195,7 +195,7 @@ StateUpdateResult WebCommands::update(JsonObject root, WebCommands & webCommands
         Command::add(
             EMSdevice::DeviceType::COMMAND,
             webCommands.commandItems.back().name,
-            [name = std::string(webCommands.commandItems.back().name)](const char * value, const int8_t id, JsonObject output) {
+            [name = std::string(webCommands.commandItems.back().name)](const char * value, const int8_t, JsonObject) {
                 return EMSESP::webCommandService.dispatchCommand(name.c_str(), value); // value is optional
             },
             FL_(command_cmd),
@@ -448,7 +448,7 @@ void WebCommandService::load_test_data() {
                 Command::add(
                     EMSdevice::DeviceType::COMMAND,
                     item.name,
-                    [name = std::string(item.name)](const char * value, const int8_t id, JsonObject output) {
+                    [name = std::string(item.name)](const char * value, const int8_t, JsonObject) {
                         return EMSESP::webCommandService.dispatchCommand(name.c_str(), value);
                     },
                     FL_(command_cmd),

src/web/WebCustomEntityService.cpp

@@ -147,7 +147,7 @@ StateUpdateResult WebCustomEntity::update(JsonObject root, WebCustomEntity & web
                 Command::add(
                     EMSdevice::DeviceType::CUSTOM,
                     webCustomEntity.customEntityItems.back().name,
-                    [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject output) {
+                    [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject) {
                         return EMSESP::webCustomEntityService.command_setvalue(value, id, name.c_str());
                     },
                     FL_(entity_cmd),
@@ -798,7 +798,7 @@ void WebCustomEntityService::load_test_data() {
         Command::add(
             EMSdevice::DeviceType::CUSTOM,
             webCustomEntity.customEntityItems.back().name,
-            [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject output) {
+            [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject) {
                 return EMSESP::webCustomEntityService.command_setvalue(value, id, name.c_str());
             },
             FL_(entity_cmd),
@@ -834,7 +834,7 @@ void WebCustomEntityService::load_test_data() {
         Command::add(
             EMSdevice::DeviceType::CUSTOM,
             webCustomEntity.customEntityItems.back().name,
-            [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject output) {
+            [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject) {
                 return EMSESP::webCustomEntityService.command_setvalue(value, id, name.c_str());
             },
             FL_(entity_cmd),
@@ -857,7 +857,7 @@ void WebCustomEntityService::load_test_data() {
         Command::add(
             EMSdevice::DeviceType::CUSTOM,
             webCustomEntity.customEntityItems.back().name,
-            [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject output) {
+            [name = std::string(webCustomEntity.customEntityItems.back().name)](const char * value, const int8_t id, JsonObject) {
                 return EMSESP::webCustomEntityService.command_setvalue(value, id, name.c_str());
             },
             FL_(entity_cmd),

src/web/WebSchedulerService.cpp

@@ -98,7 +98,7 @@ StateUpdateResult WebScheduler::update(JsonObject root, WebScheduler & webSchedu
         Command::add(
             EMSdevice::DeviceType::SCHEDULER,
             webScheduler.scheduleItems.back().name,
-            [name = std::string(webScheduler.scheduleItems.back().name)](const char * value, const int8_t id, JsonObject output) {
+            [name = std::string(webScheduler.scheduleItems.back().name)](const char * value, const int8_t id, JsonObject) {
                 return EMSESP::webSchedulerService.command_setvalue(value, id, name.c_str());
             },
             FL_(schedule_cmd),
@@ -464,7 +464,7 @@ void WebSchedulerService::load_test_data() {
                 Command::add(
                     EMSdevice::DeviceType::SCHEDULER,
                     item.name,
-                    [name = std::string(item.name)](const char * value, const int8_t id, JsonObject output) {
+                    [name = std::string(item.name)](const char * value, const int8_t id, JsonObject) {
                         return EMSESP::webSchedulerService.command_setvalue(value, id, name.c_str());
                     },
                     FL_(schedule_cmd),