Merge pull request #2867 from proddy/dev

last minute 3.8 cleanup

CHANGELOG.md

@@ -5,92 +5,6 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [3.8.0]
-
-## Added
-
-- analogsensor types: NTC and RGB-Led
-- Flag for HMC310 [#2465](https://github.com/emsesp/EMS-ESP32/issues/2465)
-- boiler auxheatersource [#2489](https://github.com/emsesp/EMS-ESP32/discussions/2489)
-- thermostat last error for RC100/300 [#2501](https://github.com/emsesp/EMS-ESP32/issues/2501)
-- boiler 0xC6 telegram [#1963](https://github.com/emsesp/EMS-ESP32/issues/1963)
-- CS6800i changes [#2448](https://github.com/emsesp/EMS-ESP32/issues/2448), [#2449](https://github.com/emsesp/EMS-ESP32/issues/2449)
-- charging pump [#2544](https://github.com/emsesp/EMS-ESP32/issues/2544)
-- hybrid CSH5800iG [#2569](https://github.com/emsesp/EMS-ESP32/issues/2569)
-- added EMS Device details to Home Assistant MQTT Discovery
-- disinfection command [#2601](https://github.com/emsesp/EMS-ESP32/issues/2601)
-- added new board profile for upcoming BBQKees E32V2.2
-- set differential pressure entity in Mixer device
-- set set climate action cooling/heating in HA [#2583](https://github.com/emsesp/EMS-ESP32/issues/2583)
-- Internal sensors of E32V2_2
-- FW200 display options [#2610](https://github.com/emsesp/EMS-ESP32/discussions/2610)
-- CR11 mode settings OFF/MANUAL depends on selTemp [#2437](https://github.com/emsesp/EMS-ESP32/issues/2437)
-- implemented eFuse settings for BBQKees boards to store model type and ESP chipset
-- Analogsensors for pulse output [#2624](https://github.com/emsesp/EMS-ESP32/discussions/2624)
-- Analogsensors frequency input [#2631](https://github.com/emsesp/EMS-ESP32/discussions/2631)
-- SRC plus thermostats [#2636](https://github.com/emsesp/EMS-ESP32/issues/2636)
-- Greenstar 2000 [#2645](https://github.com/emsesp/EMS-ESP32/issues/2645)
-- RC3xx `dhw modetype` [#2659](https://github.com/emsesp/EMS-ESP32/discussions/2659)
-- new boiler entities VR0,VR1, compressor speed [#2669](https://github.com/emsesp/EMS-ESP32/issues/2669)
-- solar temperature TS16 [#2690](https://github.com/emsesp/EMS-ESP32/issues/2690)
-- pumpmode enum for HT3 boilers, add commands for manual defrost, chimneysweeper [#2727](https://github.com/emsesp/EMS-ESP32/issues/2727)
-- pid settings [#2735](https://github.com/emsesp/EMS-ESP32/issues/2735)
-- refresh MQTT button added to MQTT Settings page
-- heating assistance, rounding custum settings [#2763](https://github.com/emsesp/EMS-ESP32/discussions/2763)
-- added counter 0..2 for short pulses, high frequency [#2758](https://github.com/emsesp/EMS-ESP32/issues/2758)
-- added LWT (Last Will and Testament) to MQTT entities in Home Assistant
-- added api/metrics endpoint for prometheus integration by @gr3enk [#2774](https://github.com/emsesp/EMS-ESP32/pull/2774)
-- added RTL8201 to eth phy list [#2800](https://github.com/emsesp/EMS-ESP32/issues/2800)
-- added partitions to Web UI Version page, so previous firmware versions can be installed [#2837](https://github.com/emsesp/EMS-ESP32/issues/2837)
-- button pressures show LED. On a long press (10 seconds) the LED flashes for 5 seconds to indicate a factory reset is about to happen. [#2848](https://github.com/emsesp/EMS-ESP32/issues/2848)
-- added `txpause` command to pause the TX, by setting Txmode to 0 (disabled) [#2850](https://github.com/emsesp/EMS-ESP32/issues/2850)
-
-## Fixed
-
-- dhw/switchtime [#2490](https://github.com/emsesp/EMS-ESP32/issues/2490)
-- switch to secure mqtt [#2492](https://github.com/emsesp/EMS-ESP32/issues/2492)
-- update link buttons [#2497](https://github.com/emsesp/EMS-ESP32/issues/2497)
-- refresh scheduler states [#2502](https://github.com/emsesp/EMS-ESP32/discussions/2502)
-- also rebuild HA config on mqtt connect for scheduler, custom and shower
-- FB100 controls the hc, not the master [#2510](https://github.com/emsesp/EMS-ESP32/issues/2510)
-- IPM DHW module, [#2524](https://github.com/emsesp/EMS-ESP32/issues/2524)
-- charge optimization [#2543](https://github.com/emsesp/EMS-ESP32/issues/2543)
-- shower active state retained, shows correctly in HA
-- MQTT Command Topic with slashes [#2571](https://github.com/emsesp/EMS-ESP32/issues/2571)
-- Add pulsed water meter input to V1.3 gateway with Lilygo S3 [#2550](https://github.com/emsesp/EMS-ESP32/issues/2550)
-- fix missing long 10-second press of Button to perform a factory reset
-- fix wwMaxPower on Junkers ZBS14 [#2609](https://github.com/emsesp/EMS-ESP32/issues/2609)
-- ventilation bypass state from telegram 0x55C [#1197](https://github.com/emsesp/EMS-ESP32/issues/1197)
-- set selflowtemp for ems+ boilers [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
-- syslog timestamp [#2704](https://github.com/emsesp/EMS-ESP32/issues/2704)
-- fixed FS format command [#2720](https://github.com/emsesp/EMS-ESP32/discussions/2720)
-- dhw priority setting to boiler and mixer, telegrams 0x2CC, 0x2CD, etc.
-- check for valid GPIOs when board profile is changed [#2841](https://github.com/emsesp/EMS-ESP32/issues/2841)
-
-## Changed
-
-- show console log with ISO date/time [#2533](https://github.com/emsesp/EMS-ESP32/discussions/2533)
-- removed ESP32 CPU temperature
-- updated core libraries like AsyncTCP, AsyncWebServer and Modbus
-- remove command `scan deep`
-- ignore repeated `forceheatingoff` commands [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
-- optimized web for better performance by adding lazy loading and caching
-- internal system analog sensors (core_voltage, supply_voltage and gateway_temperature) cannot be accidentally removed
-- double click button reconnects EMS-ESP to AP
-- place system message command in side scheduler loop to reduce stack memory usage by 2KB
-- syslog mark interval set to 1 hour
-- handle process_telegram in oneloop
-- improved GPIO validation for Analog Sensors and System GPIOs
-- entities with no values are greyed out in the Web UI in the Customization page
-- added System Status to Web Status page
-- show number on entities and supported languages in log on boot
-- on tx read fail delay the 3rd. retry 2 sec
-- move vectors and lists to PSRAM
-- removed unused last topic/payload echo-check
-- added Home Assistant device details to MQTT Discovery for all devices
-- device_class and state_class changes for HA MQTT Discovery [#2825](https://github.com/emsesp/EMS-ESP32/issues/2825)
-
-
 ## [3.7.2] 22 March 2025
 
 ## Added

CHANGELOG_LATEST.md

@@ -1,3 +1,88 @@
 # Changelog
 
 For more details go to [emsesp.org](https://emsesp.org/).
+
+## [3.8.0]
+
+## Added
+
+- analogsensor types: NTC and RGB-Led
+- Flag for HMC310 [#2465](https://github.com/emsesp/EMS-ESP32/issues/2465)
+- boiler auxheatersource [#2489](https://github.com/emsesp/EMS-ESP32/discussions/2489)
+- thermostat last error for RC100/300 [#2501](https://github.com/emsesp/EMS-ESP32/issues/2501)
+- boiler 0xC6 telegram [#1963](https://github.com/emsesp/EMS-ESP32/issues/1963)
+- CS6800i changes [#2448](https://github.com/emsesp/EMS-ESP32/issues/2448), [#2449](https://github.com/emsesp/EMS-ESP32/issues/2449)
+- charging pump [#2544](https://github.com/emsesp/EMS-ESP32/issues/2544)
+- hybrid CSH5800iG [#2569](https://github.com/emsesp/EMS-ESP32/issues/2569)
+- added EMS Device details to Home Assistant MQTT Discovery
+- disinfection command [#2601](https://github.com/emsesp/EMS-ESP32/issues/2601)
+- added new board profile for upcoming BBQKees E32V2.2
+- set differential pressure entity in Mixer device
+- set set climate action cooling/heating in HA [#2583](https://github.com/emsesp/EMS-ESP32/issues/2583)
+- Internal sensors of E32V2_2
+- FW200 display options [#2610](https://github.com/emsesp/EMS-ESP32/discussions/2610)
+- CR11 mode settings OFF/MANUAL depends on selTemp [#2437](https://github.com/emsesp/EMS-ESP32/issues/2437)
+- implemented eFuse settings for BBQKees boards to store model type and ESP chipset
+- Analogsensors for pulse output [#2624](https://github.com/emsesp/EMS-ESP32/discussions/2624)
+- Analogsensors frequency input [#2631](https://github.com/emsesp/EMS-ESP32/discussions/2631)
+- SRC plus thermostats [#2636](https://github.com/emsesp/EMS-ESP32/issues/2636)
+- Greenstar 2000 [#2645](https://github.com/emsesp/EMS-ESP32/issues/2645)
+- RC3xx `dhw modetype` [#2659](https://github.com/emsesp/EMS-ESP32/discussions/2659)
+- new boiler entities VR0,VR1, compressor speed [#2669](https://github.com/emsesp/EMS-ESP32/issues/2669)
+- solar temperature TS16 [#2690](https://github.com/emsesp/EMS-ESP32/issues/2690)
+- pumpmode enum for HT3 boilers, add commands for manual defrost, chimneysweeper [#2727](https://github.com/emsesp/EMS-ESP32/issues/2727)
+- pid settings [#2735](https://github.com/emsesp/EMS-ESP32/issues/2735)
+- refresh MQTT button added to MQTT Settings page
+- heating assistance, rounding custum settings [#2763](https://github.com/emsesp/EMS-ESP32/discussions/2763)
+- added counter 0..2 for short pulses, high frequency [#2758](https://github.com/emsesp/EMS-ESP32/issues/2758)
+- added LWT (Last Will and Testament) to MQTT entities in Home Assistant
+- added api/metrics endpoint for prometheus integration by @gr3enk [#2774](https://github.com/emsesp/EMS-ESP32/pull/2774)
+- added RTL8201 to eth phy list [#2800](https://github.com/emsesp/EMS-ESP32/issues/2800)
+- added partitions to Web UI Version page, so previous firmware versions can be installed [#2837](https://github.com/emsesp/EMS-ESP32/issues/2837)
+- button pressures show LED. On a long press (10 seconds) the LED flashes for 5 seconds to indicate a factory reset is about to happen. [#2848](https://github.com/emsesp/EMS-ESP32/issues/2848)
+- added `txpause` command to pause the TX, by setting Txmode to 0 (disabled) [#2850](https://github.com/emsesp/EMS-ESP32/issues/2850)
+
+## Fixed
+
+- dhw/switchtime [#2490](https://github.com/emsesp/EMS-ESP32/issues/2490)
+- switch to secure mqtt [#2492](https://github.com/emsesp/EMS-ESP32/issues/2492)
+- update link buttons [#2497](https://github.com/emsesp/EMS-ESP32/issues/2497)
+- refresh scheduler states [#2502](https://github.com/emsesp/EMS-ESP32/discussions/2502)
+- also rebuild HA config on mqtt connect for scheduler, custom and shower
+- FB100 controls the hc, not the master [#2510](https://github.com/emsesp/EMS-ESP32/issues/2510)
+- IPM DHW module, [#2524](https://github.com/emsesp/EMS-ESP32/issues/2524)
+- charge optimization [#2543](https://github.com/emsesp/EMS-ESP32/issues/2543)
+- shower active state retained, shows correctly in HA
+- MQTT Command Topic with slashes [#2571](https://github.com/emsesp/EMS-ESP32/issues/2571)
+- Add pulsed water meter input to V1.3 gateway with Lilygo S3 [#2550](https://github.com/emsesp/EMS-ESP32/issues/2550)
+- fix missing long 10-second press of Button to perform a factory reset
+- fix wwMaxPower on Junkers ZBS14 [#2609](https://github.com/emsesp/EMS-ESP32/issues/2609)
+- ventilation bypass state from telegram 0x55C [#1197](https://github.com/emsesp/EMS-ESP32/issues/1197)
+- set selflowtemp for ems+ boilers [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
+- syslog timestamp [#2704](https://github.com/emsesp/EMS-ESP32/issues/2704)
+- fixed FS format command [#2720](https://github.com/emsesp/EMS-ESP32/discussions/2720)
+- dhw priority setting to boiler and mixer, telegrams 0x2CC, 0x2CD, etc.
+- check for valid GPIOs when board profile is changed [#2841](https://github.com/emsesp/EMS-ESP32/issues/2841)
+
+## Changed
+
+- show console log with ISO date/time [#2533](https://github.com/emsesp/EMS-ESP32/discussions/2533)
+- removed ESP32 CPU temperature
+- updated core libraries like AsyncTCP, AsyncWebServer and Modbus
+- remove command `scan deep`
+- ignore repeated `forceheatingoff` commands [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
+- optimized web for better performance by adding lazy loading and caching
+- internal system analog sensors (core_voltage, supply_voltage and gateway_temperature) cannot be accidentally removed
+- double click button reconnects EMS-ESP to AP
+- place system message command in side scheduler loop to reduce stack memory usage by 2KB
+- syslog mark interval set to 1 hour
+- handle process_telegram in oneloop
+- improved GPIO validation for Analog Sensors and System GPIOs
+- entities with no values are greyed out in the Web UI in the Customization page
+- added System Status to Web Status page
+- show number on entities and supported languages in log on boot
+- on tx read fail delay the 3rd. retry 2 sec
+- move vectors and lists to PSRAM
+- removed unused last topic/payload echo-check
+- added Home Assistant device details to MQTT Discovery for all devices
+- device_class and state_class changes for HA MQTT Discovery [#2825](https://github.com/emsesp/EMS-ESP32/issues/2825)

mock-api/pnpm-lock.yaml

@@ -0,0 +1,316 @@
+lockfileVersion: '9.0'
+
+settings:
+  autoInstallPeers: true
+  excludeLinksFromLockfile: false
+
+importers:
+
+  .:
+    dependencies:
+      '@msgpack/msgpack':
+        specifier: ^3.1.3
+        version: 3.1.3
+      '@trivago/prettier-plugin-sort-imports':
+        specifier: ^6.0.0
+        version: 6.0.0(prettier@3.7.4)
+      formidable:
+        specifier: ^3.5.4
+        version: 3.5.4
+      itty-router:
+        specifier: ^5.0.22
+        version: 5.0.22
+      prettier:
+        specifier: ^3.7.4
+        version: 3.7.4
+
+packages:
+
+  '@babel/code-frame@7.27.1':
+    resolution: {integrity: sha512-cjQ7ZlQ0Mv3b47hABuTevyTuYN4i+loJKGeV9flcCgIK37cCXRh+L1bd3iBHlynerhQ7BhCkn2BPbQUL+rGqFg==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/generator@7.28.5':
+    resolution: {integrity: sha512-3EwLFhZ38J4VyIP6WNtt2kUdW9dokXA9Cr4IVIFHuCpZ3H8/YFOl5JjZHisrn1fATPBmKKqXzDFvh9fUwHz6CQ==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-globals@7.28.0':
+    resolution: {integrity: sha512-+W6cISkXFa1jXsDEdYA8HeevQT/FULhxzR99pxphltZcVaugps53THCeiWA8SguxxpSp3gKPiuYfSWopkLQ4hw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-string-parser@7.27.1':
+    resolution: {integrity: sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-validator-identifier@7.28.5':
+    resolution: {integrity: sha512-qSs4ifwzKJSV39ucNjsvc6WVHs6b7S03sOh2OcHF9UHfVPqWWALUsNUVzhSBiItjRZoLHx7nIarVjqKVusUZ1Q==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/parser@7.28.5':
+    resolution: {integrity: sha512-KKBU1VGYR7ORr3At5HAtUQ+TV3SzRCXmA/8OdDZiLDBIZxVyzXuztPjfLd3BV1PRAQGCMWWSHYhL0F8d5uHBDQ==}
+    engines: {node: '>=6.0.0'}
+    hasBin: true
+
+  '@babel/template@7.27.2':
+    resolution: {integrity: sha512-LPDZ85aEJyYSd18/DkjNh4/y1ntkE5KwUHWTiqgRxruuZL2F1yuHligVHLvcHY2vMHXttKFpJn6LwfI7cw7ODw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/traverse@7.28.5':
+    resolution: {integrity: sha512-TCCj4t55U90khlYkVV/0TfkJkAkUg3jZFA3Neb7unZT8CPok7iiRfaX0F+WnqWqt7OxhOn0uBKXCw4lbL8W0aQ==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/types@7.28.5':
+    resolution: {integrity: sha512-qQ5m48eI/MFLQ5PxQj4PFaprjyCTLI37ElWMmNs0K8Lk3dVeOdNpB3ks8jc7yM5CDmVC73eMVk/trk3fgmrUpA==}
+    engines: {node: '>=6.9.0'}
+
+  '@jridgewell/gen-mapping@0.3.13':
+    resolution: {integrity: sha512-2kkt/7niJ6MgEPxF0bYdQ6etZaA+fQvDcLKckhy1yIQOzaoKjBBjSj63/aLVjYE3qhRt5dvM+uUyfCg6UKCBbA==}
+
+  '@jridgewell/resolve-uri@3.1.2':
+    resolution: {integrity: sha512-bRISgCIjP20/tbWSPWMEi54QVPRZExkuD9lJL+UIxUKtwVJA8wW1Trb1jMs1RFXo1CBTNZ/5hpC9QvmKWdopKw==}
+    engines: {node: '>=6.0.0'}
+
+  '@jridgewell/sourcemap-codec@1.5.5':
+    resolution: {integrity: sha512-cYQ9310grqxueWbl+WuIUIaiUaDcj7WOq5fVhEljNVgRfOUhY9fy2zTvfoqWsnebh8Sl70VScFbICvJnLKB0Og==}
+
+  '@jridgewell/trace-mapping@0.3.31':
+    resolution: {integrity: sha512-zzNR+SdQSDJzc8joaeP8QQoCQr8NuYx2dIIytl1QeBEZHJ9uW6hebsrYgbz8hJwUQao3TWCMtmfV8Nu1twOLAw==}
+
+  '@msgpack/msgpack@3.1.3':
+    resolution: {integrity: sha512-47XIizs9XZXvuJgoaJUIE2lFoID8ugvc0jzSHP+Ptfk8nTbnR8g788wv48N03Kx0UkAv559HWRQ3yzOgzlRNUA==}
+    engines: {node: '>= 18'}
+
+  '@noble/hashes@1.8.0':
+    resolution: {integrity: sha512-jCs9ldd7NwzpgXDIf6P3+NrHh9/sD6CQdxHyjQI+h/6rDNo88ypBxxz45UDuZHz9r3tNz7N/VInSVoVdtXEI4A==}
+    engines: {node: ^14.21.3 || >=16}
+
+  '@paralleldrive/cuid2@2.3.1':
+    resolution: {integrity: sha512-XO7cAxhnTZl0Yggq6jOgjiOHhbgcO4NqFqwSmQpjK3b6TEE6Uj/jfSk6wzYyemh3+I0sHirKSetjQwn5cZktFw==}
+
+  '@trivago/prettier-plugin-sort-imports@6.0.0':
+    resolution: {integrity: sha512-Xarx55ow0R8oC7ViL5fPmDsg1EBa1dVhyZFVbFXNtPPJyW2w9bJADIla8YFSaNG9N06XfcklA9O9vmw4noNxkQ==}
+    engines: {node: '>= 20'}
+    peerDependencies:
+      '@vue/compiler-sfc': 3.x
+      prettier: 2.x - 3.x
+      prettier-plugin-ember-template-tag: '>= 2.0.0'
+      prettier-plugin-svelte: 3.x
+      svelte: 4.x || 5.x
+    peerDependenciesMeta:
+      '@vue/compiler-sfc':
+        optional: true
+      prettier-plugin-ember-template-tag:
+        optional: true
+      prettier-plugin-svelte:
+        optional: true
+      svelte:
+        optional: true
+
+  asap@2.0.6:
+    resolution: {integrity: sha512-BSHWgDSAiKs50o2Re8ppvp3seVHXSRM44cdSsT9FfNEUUZLOGWVCsiWaRPWM1Znn+mqZ1OfVZ3z3DWEzSp7hRA==}
+
+  balanced-match@1.0.2:
+    resolution: {integrity: sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==}
+
+  brace-expansion@2.0.2:
+    resolution: {integrity: sha512-Jt0vHyM+jmUBqojB7E1NIYadt0vI0Qxjxd2TErW94wDz+E2LAm5vKMXXwg6ZZBTHPuUlDgQHKXvjGBdfcF1ZDQ==}
+
+  debug@4.4.3:
+    resolution: {integrity: sha512-RGwwWnwQvkVfavKVt22FGLw+xYSdzARwm0ru6DhTVA3umU5hZc28V3kO4stgYryrTlLpuvgI9GiijltAjNbcqA==}
+    engines: {node: '>=6.0'}
+    peerDependencies:
+      supports-color: '*'
+    peerDependenciesMeta:
+      supports-color:
+        optional: true
+
+  dezalgo@1.0.4:
+    resolution: {integrity: sha512-rXSP0bf+5n0Qonsb+SVVfNfIsimO4HEtmnIpPHY8Q1UCzKlQrDMfdobr8nJOOsRgWCyMRqeSBQzmWUMq7zvVig==}
+
+  formidable@3.5.4:
+    resolution: {integrity: sha512-YikH+7CUTOtP44ZTnUhR7Ic2UASBPOqmaRkRKxRbywPTe5VxF7RRCck4af9wutiZ/QKM5nME9Bie2fFaPz5Gug==}
+    engines: {node: '>=14.0.0'}
+
+  itty-router@5.0.22:
+    resolution: {integrity: sha512-9hmdGErWdYDOurGYxSbqLhy4EFReIwk71hMZTJ5b+zfa2zjMNV1ftFno2b8VjAQvX615gNB8Qxbl9JMRqHnIVA==}
+
+  javascript-natural-sort@0.7.1:
+    resolution: {integrity: sha512-nO6jcEfZWQXDhOiBtG2KvKyEptz7RVbpGP4vTD2hLBdmNQSsCiicO2Ioinv6UI4y9ukqnBpy+XZ9H6uLNgJTlw==}
+
+  js-tokens@4.0.0:
+    resolution: {integrity: sha512-RdJUflcE3cUzKiMqQgsCu06FPu9UdIJO0beYbPhHN4k6apgJtifcoCtT9bcxOpYBtpD2kCM6Sbzg4CausW/PKQ==}
+
+  jsesc@3.1.0:
+    resolution: {integrity: sha512-/sM3dO2FOzXjKQhJuo0Q173wf2KOo8t4I8vHy6lF9poUp7bKT0/NHE8fPX23PwfhnykfqnC2xRxOnVw5XuGIaA==}
+    engines: {node: '>=6'}
+    hasBin: true
+
+  lodash-es@4.17.22:
+    resolution: {integrity: sha512-XEawp1t0gxSi9x01glktRZ5HDy0HXqrM0x5pXQM98EaI0NxO6jVM7omDOxsuEo5UIASAnm2bRp1Jt/e0a2XU8Q==}
+
+  minimatch@9.0.5:
+    resolution: {integrity: sha512-G6T0ZX48xgozx7587koeX9Ys2NYy6Gmv//P89sEte9V9whIapMNF4idKxnW2QtCcLiTWlb/wfCabAtAFWhhBow==}
+    engines: {node: '>=16 || 14 >=14.17'}
+
+  ms@2.1.3:
+    resolution: {integrity: sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==}
+
+  once@1.4.0:
+    resolution: {integrity: sha512-lNaJgI+2Q5URQBkccEKHTQOPaXdUxnZZElQTZY0MFUAuaEqe1E+Nyvgdz/aIyNi6Z9MzO5dv1H8n58/GELp3+w==}
+
+  parse-imports-exports@0.2.4:
+    resolution: {integrity: sha512-4s6vd6dx1AotCx/RCI2m7t7GCh5bDRUtGNvRfHSP2wbBQdMi67pPe7mtzmgwcaQ8VKK/6IB7Glfyu3qdZJPybQ==}
+
+  parse-statements@1.0.11:
+    resolution: {integrity: sha512-HlsyYdMBnbPQ9Jr/VgJ1YF4scnldvJpJxCVx6KgqPL4dxppsWrJHCIIxQXMJrqGnsRkNPATbeMJ8Yxu7JMsYcA==}
+
+  picocolors@1.1.1:
+    resolution: {integrity: sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA==}
+
+  prettier@3.7.4:
+    resolution: {integrity: sha512-v6UNi1+3hSlVvv8fSaoUbggEM5VErKmmpGA7Pl3HF8V6uKY7rvClBOJlH6yNwQtfTueNkGVpOv/mtWL9L4bgRA==}
+    engines: {node: '>=14'}
+    hasBin: true
+
+  wrappy@1.0.2:
+    resolution: {integrity: sha512-l4Sp/DRseor9wL6EvV2+TuQn63dMkPjZ/sp9XkghTEbV9KlPS1xUsZ3u7/IQO4wxtcFB4bgpQPRcR3QCvezPcQ==}
+
+snapshots:
+
+  '@babel/code-frame@7.27.1':
+    dependencies:
+      '@babel/helper-validator-identifier': 7.28.5
+      js-tokens: 4.0.0
+      picocolors: 1.1.1
+
+  '@babel/generator@7.28.5':
+    dependencies:
+      '@babel/parser': 7.28.5
+      '@babel/types': 7.28.5
+      '@jridgewell/gen-mapping': 0.3.13
+      '@jridgewell/trace-mapping': 0.3.31
+      jsesc: 3.1.0
+
+  '@babel/helper-globals@7.28.0': {}
+
+  '@babel/helper-string-parser@7.27.1': {}
+
+  '@babel/helper-validator-identifier@7.28.5': {}
+
+  '@babel/parser@7.28.5':
+    dependencies:
+      '@babel/types': 7.28.5
+
+  '@babel/template@7.27.2':
+    dependencies:
+      '@babel/code-frame': 7.27.1
+      '@babel/parser': 7.28.5
+      '@babel/types': 7.28.5
+
+  '@babel/traverse@7.28.5':
+    dependencies:
+      '@babel/code-frame': 7.27.1
+      '@babel/generator': 7.28.5
+      '@babel/helper-globals': 7.28.0
+      '@babel/parser': 7.28.5
+      '@babel/template': 7.27.2
+      '@babel/types': 7.28.5
+      debug: 4.4.3
+    transitivePeerDependencies:
+      - supports-color
+
+  '@babel/types@7.28.5':
+    dependencies:
+      '@babel/helper-string-parser': 7.27.1
+      '@babel/helper-validator-identifier': 7.28.5
+
+  '@jridgewell/gen-mapping@0.3.13':
+    dependencies:
+      '@jridgewell/sourcemap-codec': 1.5.5
+      '@jridgewell/trace-mapping': 0.3.31
+
+  '@jridgewell/resolve-uri@3.1.2': {}
+
+  '@jridgewell/sourcemap-codec@1.5.5': {}
+
+  '@jridgewell/trace-mapping@0.3.31':
+    dependencies:
+      '@jridgewell/resolve-uri': 3.1.2
+      '@jridgewell/sourcemap-codec': 1.5.5
+
+  '@msgpack/msgpack@3.1.3': {}
+
+  '@noble/hashes@1.8.0': {}
+
+  '@paralleldrive/cuid2@2.3.1':
+    dependencies:
+      '@noble/hashes': 1.8.0
+
+  '@trivago/prettier-plugin-sort-imports@6.0.0(prettier@3.7.4)':
+    dependencies:
+      '@babel/generator': 7.28.5
+      '@babel/parser': 7.28.5
+      '@babel/traverse': 7.28.5
+      '@babel/types': 7.28.5
+      javascript-natural-sort: 0.7.1
+      lodash-es: 4.17.22
+      minimatch: 9.0.5
+      parse-imports-exports: 0.2.4
+      prettier: 3.7.4
+    transitivePeerDependencies:
+      - supports-color
+
+  asap@2.0.6: {}
+
+  balanced-match@1.0.2: {}
+
+  brace-expansion@2.0.2:
+    dependencies:
+      balanced-match: 1.0.2
+
+  debug@4.4.3:
+    dependencies:
+      ms: 2.1.3
+
+  dezalgo@1.0.4:
+    dependencies:
+      asap: 2.0.6
+      wrappy: 1.0.2
+
+  formidable@3.5.4:
+    dependencies:
+      '@paralleldrive/cuid2': 2.3.1
+      dezalgo: 1.0.4
+      once: 1.4.0
+
+  itty-router@5.0.22: {}
+
+  javascript-natural-sort@0.7.1: {}
+
+  js-tokens@4.0.0: {}
+
+  jsesc@3.1.0: {}
+
+  lodash-es@4.17.22: {}
+
+  minimatch@9.0.5:
+    dependencies:
+      brace-expansion: 2.0.2
+
+  ms@2.1.3: {}
+
+  once@1.4.0:
+    dependencies:
+      wrappy: 1.0.2
+
+  parse-imports-exports@0.2.4:
+    dependencies:
+      parse-statements: 1.0.11
+
+  parse-statements@1.0.11: {}
+
+  picocolors@1.1.1: {}
+
+  prettier@3.7.4: {}
+
+  wrappy@1.0.2: {}

scripts/run_executable.py

@@ -30,8 +30,6 @@ def run_with_streaming_input(program_path, test_command, output_file=None):
             stdout=subprocess.PIPE,
             stderr=subprocess.PIPE,
             text=True,
-            encoding='utf-8',
-            errors='replace',  # Replace invalid UTF-8 bytes instead of crashing
             bufsize=1  # Line buffered
         )
         
@@ -72,7 +70,7 @@ def run_with_streaming_input(program_path, test_command, output_file=None):
                 os.remove(output_file)
             
             # Export CSV output to file
-            with open(output_file, 'w', encoding='utf-8', errors='replace') as f:
+            with open(output_file, 'w') as f:
                 f.writelines(csv_output)
             print(f"CSV file created: {output_file} ({os.path.getsize(output_file)} bytes)")
 

scripts/update_modbus_registers.py

@@ -1,10 +1,7 @@
 #
 # Update modbus parameters from entity definitions.
 # This script generates c++ code for the modbus parameter definitions.
-#
-# Called by /scripts/generate_csv_and_headers.sh and pio build_modbus target.
-# can be called manually with:
-#   cat ./docs/dump_entities.csv | python3 ./scripts/update_modbus_registers.py > ./src/core/modbus_entity_parameters.hpp
+# Called by /scripts/generate_csv_and_headers.sh
 
 import fileinput
 import csv
@@ -162,22 +159,23 @@ cpp_entry_template = Template(
 listNames = {}
 transre = re.compile(r'^MAKE_TRANSLATION\(([^,\s]+)\s*,\s*\"([^\"]+)\"')
 try:
-    with open('./src/core/locale_translations.h', 'r', encoding='utf-8', errors='replace') as transf:
+    with open('./src/core/locale_translations.h', 'r') as transf:
         for line in transf:
             m = transre.match(line)
             if m is not None:
                 listNames[m.group(2)] = m.group(1)
 except FileNotFoundError:
     # Handle case where file doesn't exist
-    raise Exception('Error! locale_translations.h not found')
+    pass
 
 entities = []
 
-with fileinput.input(encoding='utf-8', errors='replace') as f_input:
+with fileinput.input() as f_input:
     entities_reader = csv.reader(f_input, delimiter=',', quotechar='"')
     headers = next(entities_reader)
 
     for row in entities_reader:
+        # Use dict comprehension for better performance
         entity = {headers[i]: val for i, val in enumerate(row)}
         entities.append(entity)
 
@@ -210,7 +208,7 @@ for entity in entities:
             (-string_sizes[entity_dev_name] // 2)  # divide and round up
 
     if int(entity["modbus count"]) <= 0:
-        raise Exception('Error! Entity "' + entity_dev_name + ' (' + entity_shortname + ')' +
+        raise Exception('Entity "' + entity_dev_name + ' (' + entity_shortname + ')' +
                         '" does not have a size - string sizes need to be added manually to update_modbus_registers.py/string_sizes[]')
 
     #    if entity["modbus count"] == "0":
@@ -269,16 +267,10 @@ for device_type_name in device_type_names:
                 sorted_entities = sorted(
                     entities.items(), key=lambda x: int(x[1]["modbus offset"]))
                 for entity_name, modbus_info in sorted_entities:
-                    # Strip device type prefix (e.g., "dhw.nrg" -> "nrg") for translation lookup
-                    lookup_name = entity_name.split('.')[-1] if '.' in entity_name else entity_name
-                    
-                    if lookup_name not in listNames:
-                        raise KeyError(f"Error! Translation not found for '{lookup_name}' (entity: '{entity_name}'). Please add it to locale_translations.h")
-                    
                     params = {
                         'devtype': "dt::" + device_type_name,
                         "tagtype": tag_to_tagtype[int(tag)],
-                        "shortname": 'FL_(' + listNames[lookup_name] + ")",
+                        "shortname": 'FL_(' + listNames[entity_name] + ")",
                         "entity_name": entity_name,
                         'registeroffset': modbus_info["modbus offset"],
                         'registercount': modbus_info["modbus count"]

src/ESP32React/UploadFileService.cpp

@@ -82,7 +82,7 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
             }
 #endif
             // it's firmware - initialize the ArduinoOTA updater
-            emsesp::EMSESP::logger().info("Uploading firmware file %s (size: %d KB). Please wait...", filename.c_str(), filesize / 1024);
+            emsesp::EMSESP::logger().info("Uploading firmware file %s (size: %d bytes)", filename.c_str(), filesize);
             // turn off UART to prevent interference with the upload
             emsesp::EMSuart::stop();
 

src/core/emsesp.cpp

@@ -1747,13 +1747,11 @@ void EMSESP::start() {
 
     webSettingsService.begin(); // load EMS-ESP Application settings
 
-    // perform any system upgrades
-    if (!factory_settings) {
-        if (system_.check_upgrade()) {
-            LOG_WARNING("System needs a restart to apply new settings. Please wait.");
-            system_.system_restart();
-        };
-    }
+    // do any system upgrades
+    if (system_.check_upgrade(factory_settings)) {
+        LOG_WARNING("System needs a restart to apply new settings. Please wait.");
+        system_.system_restart();
+    };
 
     // Load our library of known devices into stack mem. Names are stored in Flash memory
     device_library_ = {
@@ -1833,7 +1831,7 @@ void EMSESP::loop() {
 
     // run the loop, unless we're in the middle of an OTA upload
     if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_NORMAL || EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
-        // check for GPIO Errors - this is called once when booting
+        // check for GPIO Errors
         if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
             static bool only_once = false;
             if (!only_once) {

src/core/system.cpp

@@ -1412,49 +1412,58 @@ bool System::check_restore() {
 // handle upgrades from previous versions
 // this function will not be called on a clean install, with no settings files yet created
 // returns true if we need a reboot
-bool System::check_upgrade() {
+bool System::check_upgrade(bool factory_settings) {
     bool        missing_version = true;
     std::string settingsVersion;
 
-    // fetch current version from settings file
-    EMSESP::webSettingsService.read([&](WebSettings const & settings) { settingsVersion = settings.version.c_str(); });
+    if (!factory_settings) {
+        // fetch current version from settings file
+        EMSESP::webSettingsService.read([&](WebSettings const & settings) { settingsVersion = settings.version.c_str(); });
 
-    // see if we're missing a version, will be < 3.5.0b13 from Dec 23 2022
-    missing_version = (settingsVersion.empty() || (settingsVersion.length() < 5));
-    if (missing_version) {
-        LOG_WARNING("No version information found");
-        settingsVersion = "3.5.0"; // this was the last stable version without version info
+        // see if we're missing a version, will be < 3.5.0b13 from Dec 23 2022
+        missing_version = (settingsVersion.empty() || (settingsVersion.length() < 5));
+        if (missing_version) {
+            LOG_WARNING("No version information found");
+            settingsVersion = "3.5.0"; // this was the last stable version without version info
+        }
+    } else {
+        settingsVersion = EMSESP_APP_VERSION; // use the current version
     }
 
     version::Semver200_version settings_version(settingsVersion);
+
+    if (!missing_version) {
+        LOG_DEBUG("Checking for version upgrades (settings file is v%d.%d.%d-%s)",
+                  settings_version.major(),
+                  settings_version.minor(),
+                  settings_version.patch(),
+                  settings_version.prerelease().c_str());
+    }
+
+    if (factory_settings) {
+        return true; // fresh install, do nothing, no reboot required
+    }
+
     version::Semver200_version this_version(EMSESP_APP_VERSION);
 
-    std::string settings_version_type = settings_version.prerelease().empty() ? "" : ("-" + settings_version.prerelease());
-    std::string this_version_type     = this_version.prerelease().empty() ? "" : ("-" + this_version.prerelease());
-    bool        save_version          = true;
-    bool        reboot_required       = false;
-
-    LOG_DEBUG("Checking for version upgrades (settings file is v%d.%d.%d%s)",
-              settings_version.major(),
-              settings_version.minor(),
-              settings_version.patch(),
-              settings_version_type.c_str());
+    bool save_version    = true;
+    bool reboot_required = false;
 
     // compare versions
     if (this_version > settings_version) {
         // we need to do an upgrade
         if (missing_version) {
-            LOG_NOTICE("Upgrading to version %d.%d.%d%s", this_version.major(), this_version.minor(), this_version.patch(), this_version_type);
+            LOG_NOTICE("Upgrading to version %d.%d.%d-%s", this_version.major(), this_version.minor(), this_version.patch(), this_version.prerelease().c_str());
         } else {
-            LOG_NOTICE("Upgrading from version %d.%d.%d%s to %d.%d.%d%s",
+            LOG_NOTICE("Upgrading from version %d.%d.%d-%s to %d.%d.%d-%s",
                        settings_version.major(),
                        settings_version.minor(),
                        settings_version.patch(),
-                       settings_version_type.c_str(),
+                       settings_version.prerelease().c_str(),
                        this_version.major(),
                        this_version.minor(),
                        this_version.patch(),
-                       this_version_type.c_str());
+                       this_version.prerelease().c_str());
         }
 
         // if we're coming from 3.4.4 or 3.5.0b14 which had no version stored then we need to apply new settings
@@ -1509,9 +1518,11 @@ bool System::check_upgrade() {
             }
             return StateUpdateResult::UNCHANGED;
         });
+
+
     } else if (this_version < settings_version) {
         // downgrading
-        LOG_NOTICE("Downgrading to version %d.%d.%d%s", this_version.major(), this_version.minor(), this_version.patch(), this_version_type.c_str());
+        LOG_NOTICE("Downgrading to version %d.%d.%d-%s", this_version.major(), this_version.minor(), this_version.patch(), this_version.prerelease().c_str());
     } else {
         save_version = false; // same version, do nothing
     }
@@ -2675,29 +2686,23 @@ bool System::uploadFirmwareURL(const char * url) {
         return false; // error
     }
 
-    int firmware_size = http.getSize();
-
-    // check we have a valid size
-    if (firmware_size < 2097152) { // 2MB or greater is required
-        LOG_ERROR("Firmware upload failed - invalid size");
-        http.end();
-        return false; // error
-    }
-
     // check we have enough space for the upload in the ota partition
+    int firmware_size = http.getSize();
+    LOG_INFO("Firmware uploading (size: %d bytes). Please wait...", firmware_size);
     if (!Update.begin(firmware_size)) {
         LOG_ERROR("Firmware upload failed - no space");
         http.end();
         return false; // error
     }
 
-    LOG_INFO("Firmware uploading (size: %d KB). Please wait...", firmware_size / 1024);
-
     Shell::loop_all(); // flush log buffers so latest messages are shown in console
 
     // we're about to start the upload, set the status so the Web System Monitor spots it
     EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_UPLOADING);
 
+    // set a callback so we can monitor progress in the WebUI
+    Update.onProgress([](size_t progress, size_t total) { EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_UPLOADING + (progress * 100 / total)); });
+
     // get tcp stream and send it to Updater
     WiFiClient * stream = http.getStreamPtr();
     if (Update.writeStream(*stream) != firmware_size) {
@@ -2787,10 +2792,8 @@ bool System::command_read(const char * value, const int8_t id) {
 
 // set the system status code - SYSTEM_STATUS in system.h
 void System::systemStatus(uint8_t status_code) {
-    if (systemStatus_ != status_code) {
-        systemStatus_ = status_code;
-        LOG_DEBUG("Setting System status code %d", status_code);
-    }
+    systemStatus_ = status_code;
+    LOG_DEBUG("Setting System status code %d", status_code);
 }
 
 uint8_t System::systemStatus() {

src/core/system.h

@@ -122,7 +122,7 @@ class System {
     void show_mem(const char * note);
     void store_settings(class WebSettings & settings);
     void syslog_init();
-    bool check_upgrade();
+    bool check_upgrade(bool factory_settings);
     bool check_restore();
     void heartbeat_json(JsonObject output);
 

src/devices/thermostat.cpp

@@ -1226,14 +1226,13 @@ void Thermostat::process_RC300Summer(std::shared_ptr<const Telegram> telegram) {
         has_update(telegram, hc->summersetmode, 7);
     }
 
-    if (hc->heatingtype != 3) {
+    if (hc->heatingtype < 3) {
         has_update(telegram, hc->designtemp, 4);
-        has_update(telegram, hc->minflowtemp, 13);
     } else {
         has_update(telegram, hc->designtemp, 5);
-        has_update(telegram, hc->minflowtemp, 8);
     }
 
+    has_update(telegram, hc->minflowtemp, 8);
     has_update(telegram, hc->fastHeatup, 10);
 }
 
@@ -4020,14 +4019,18 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
         case HeatingCircuit::Mode::MINFLOW:
             set_typeid      = summer_typeids[hc->hc()];
             validate_typeid = set_typeid;
-            offset          = hc->heatingtype == 3 ? 8 : 13;
+            offset          = 8;
             factor          = 1;
             break;
         case HeatingCircuit::Mode::MAXFLOW:
             set_typeid      = curve_typeids[hc->hc()];
             validate_typeid = set_typeid;
-            offset          = hc->heatingtype == 3 ? 7 : 8;
-            factor          = 1;
+            if (hc->heatingtype == 3) {
+                offset = 7;
+            } else {
+                offset = 8;
+            }
+            factor = 1;
             break;
         case HeatingCircuit::Mode::NOFROST:
             set_typeid      = curve_typeids[hc->hc()];

src/emsesp_version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.8.0"
+#define EMSESP_APP_VERSION "3.8.0-dev.1"