Merge pull request #2871 from proddy/dev

overcome strange chars in header files

CHANGELOG.md

@@ -5,92 +5,6 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [3.8.0]
-
-## Added
-
-- analogsensor types: NTC and RGB-Led
-- Flag for HMC310 [#2465](https://github.com/emsesp/EMS-ESP32/issues/2465)
-- boiler auxheatersource [#2489](https://github.com/emsesp/EMS-ESP32/discussions/2489)
-- thermostat last error for RC100/300 [#2501](https://github.com/emsesp/EMS-ESP32/issues/2501)
-- boiler 0xC6 telegram [#1963](https://github.com/emsesp/EMS-ESP32/issues/1963)
-- CS6800i changes [#2448](https://github.com/emsesp/EMS-ESP32/issues/2448), [#2449](https://github.com/emsesp/EMS-ESP32/issues/2449)
-- charging pump [#2544](https://github.com/emsesp/EMS-ESP32/issues/2544)
-- hybrid CSH5800iG [#2569](https://github.com/emsesp/EMS-ESP32/issues/2569)
-- added EMS Device details to Home Assistant MQTT Discovery
-- disinfection command [#2601](https://github.com/emsesp/EMS-ESP32/issues/2601)
-- added new board profile for upcoming BBQKees E32V2.2
-- set differential pressure entity in Mixer device
-- set set climate action cooling/heating in HA [#2583](https://github.com/emsesp/EMS-ESP32/issues/2583)
-- Internal sensors of E32V2_2
-- FW200 display options [#2610](https://github.com/emsesp/EMS-ESP32/discussions/2610)
-- CR11 mode settings OFF/MANUAL depends on selTemp [#2437](https://github.com/emsesp/EMS-ESP32/issues/2437)
-- implemented eFuse settings for BBQKees boards to store model type and ESP chipset
-- Analogsensors for pulse output [#2624](https://github.com/emsesp/EMS-ESP32/discussions/2624)
-- Analogsensors frequency input [#2631](https://github.com/emsesp/EMS-ESP32/discussions/2631)
-- SRC plus thermostats [#2636](https://github.com/emsesp/EMS-ESP32/issues/2636)
-- Greenstar 2000 [#2645](https://github.com/emsesp/EMS-ESP32/issues/2645)
-- RC3xx `dhw modetype` [#2659](https://github.com/emsesp/EMS-ESP32/discussions/2659)
-- new boiler entities VR0,VR1, compressor speed [#2669](https://github.com/emsesp/EMS-ESP32/issues/2669)
-- solar temperature TS16 [#2690](https://github.com/emsesp/EMS-ESP32/issues/2690)
-- pumpmode enum for HT3 boilers, add commands for manual defrost, chimneysweeper [#2727](https://github.com/emsesp/EMS-ESP32/issues/2727)
-- pid settings [#2735](https://github.com/emsesp/EMS-ESP32/issues/2735)
-- refresh MQTT button added to MQTT Settings page
-- heating assistance, rounding custum settings [#2763](https://github.com/emsesp/EMS-ESP32/discussions/2763)
-- added counter 0..2 for short pulses, high frequency [#2758](https://github.com/emsesp/EMS-ESP32/issues/2758)
-- added LWT (Last Will and Testament) to MQTT entities in Home Assistant
-- added api/metrics endpoint for prometheus integration by @gr3enk [#2774](https://github.com/emsesp/EMS-ESP32/pull/2774)
-- added RTL8201 to eth phy list [#2800](https://github.com/emsesp/EMS-ESP32/issues/2800)
-- added partitions to Web UI Version page, so previous firmware versions can be installed [#2837](https://github.com/emsesp/EMS-ESP32/issues/2837)
-- button pressures show LED. On a long press (10 seconds) the LED flashes for 5 seconds to indicate a factory reset is about to happen. [#2848](https://github.com/emsesp/EMS-ESP32/issues/2848)
-- added `txpause` command to pause the TX, by setting Txmode to 0 (disabled) [#2850](https://github.com/emsesp/EMS-ESP32/issues/2850)
-
-## Fixed
-
-- dhw/switchtime [#2490](https://github.com/emsesp/EMS-ESP32/issues/2490)
-- switch to secure mqtt [#2492](https://github.com/emsesp/EMS-ESP32/issues/2492)
-- update link buttons [#2497](https://github.com/emsesp/EMS-ESP32/issues/2497)
-- refresh scheduler states [#2502](https://github.com/emsesp/EMS-ESP32/discussions/2502)
-- also rebuild HA config on mqtt connect for scheduler, custom and shower
-- FB100 controls the hc, not the master [#2510](https://github.com/emsesp/EMS-ESP32/issues/2510)
-- IPM DHW module, [#2524](https://github.com/emsesp/EMS-ESP32/issues/2524)
-- charge optimization [#2543](https://github.com/emsesp/EMS-ESP32/issues/2543)
-- shower active state retained, shows correctly in HA
-- MQTT Command Topic with slashes [#2571](https://github.com/emsesp/EMS-ESP32/issues/2571)
-- Add pulsed water meter input to V1.3 gateway with Lilygo S3 [#2550](https://github.com/emsesp/EMS-ESP32/issues/2550)
-- fix missing long 10-second press of Button to perform a factory reset
-- fix wwMaxPower on Junkers ZBS14 [#2609](https://github.com/emsesp/EMS-ESP32/issues/2609)
-- ventilation bypass state from telegram 0x55C [#1197](https://github.com/emsesp/EMS-ESP32/issues/1197)
-- set selflowtemp for ems+ boilers [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
-- syslog timestamp [#2704](https://github.com/emsesp/EMS-ESP32/issues/2704)
-- fixed FS format command [#2720](https://github.com/emsesp/EMS-ESP32/discussions/2720)
-- dhw priority setting to boiler and mixer, telegrams 0x2CC, 0x2CD, etc.
-- check for valid GPIOs when board profile is changed [#2841](https://github.com/emsesp/EMS-ESP32/issues/2841)
-
-## Changed
-
-- show console log with ISO date/time [#2533](https://github.com/emsesp/EMS-ESP32/discussions/2533)
-- removed ESP32 CPU temperature
-- updated core libraries like AsyncTCP, AsyncWebServer and Modbus
-- remove command `scan deep`
-- ignore repeated `forceheatingoff` commands [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
-- optimized web for better performance by adding lazy loading and caching
-- internal system analog sensors (core_voltage, supply_voltage and gateway_temperature) cannot be accidentally removed
-- double click button reconnects EMS-ESP to AP
-- place system message command in side scheduler loop to reduce stack memory usage by 2KB
-- syslog mark interval set to 1 hour
-- handle process_telegram in oneloop
-- improved GPIO validation for Analog Sensors and System GPIOs
-- entities with no values are greyed out in the Web UI in the Customization page
-- added System Status to Web Status page
-- show number on entities and supported languages in log on boot
-- on tx read fail delay the 3rd. retry 2 sec
-- move vectors and lists to PSRAM
-- removed unused last topic/payload echo-check
-- added Home Assistant device details to MQTT Discovery for all devices
-- device_class and state_class changes for HA MQTT Discovery [#2825](https://github.com/emsesp/EMS-ESP32/issues/2825)
-
-
 ## [3.7.2] 22 March 2025
 
 ## Added

CHANGELOG_LATEST.md

@@ -1,3 +1,88 @@
 # Changelog
 
 For more details go to [emsesp.org](https://emsesp.org/).
+
+## [3.8.0]
+
+## Added
+
+- analogsensor types: NTC and RGB-Led
+- Flag for HMC310 [#2465](https://github.com/emsesp/EMS-ESP32/issues/2465)
+- boiler auxheatersource [#2489](https://github.com/emsesp/EMS-ESP32/discussions/2489)
+- thermostat last error for RC100/300 [#2501](https://github.com/emsesp/EMS-ESP32/issues/2501)
+- boiler 0xC6 telegram [#1963](https://github.com/emsesp/EMS-ESP32/issues/1963)
+- CS6800i changes [#2448](https://github.com/emsesp/EMS-ESP32/issues/2448), [#2449](https://github.com/emsesp/EMS-ESP32/issues/2449)
+- charging pump [#2544](https://github.com/emsesp/EMS-ESP32/issues/2544)
+- hybrid CSH5800iG [#2569](https://github.com/emsesp/EMS-ESP32/issues/2569)
+- added EMS Device details to Home Assistant MQTT Discovery
+- disinfection command [#2601](https://github.com/emsesp/EMS-ESP32/issues/2601)
+- added new board profile for upcoming BBQKees E32V2.2
+- set differential pressure entity in Mixer device
+- set set climate action cooling/heating in HA [#2583](https://github.com/emsesp/EMS-ESP32/issues/2583)
+- Internal sensors of E32V2_2
+- FW200 display options [#2610](https://github.com/emsesp/EMS-ESP32/discussions/2610)
+- CR11 mode settings OFF/MANUAL depends on selTemp [#2437](https://github.com/emsesp/EMS-ESP32/issues/2437)
+- implemented eFuse settings for BBQKees boards to store model type and ESP chipset
+- Analogsensors for pulse output [#2624](https://github.com/emsesp/EMS-ESP32/discussions/2624)
+- Analogsensors frequency input [#2631](https://github.com/emsesp/EMS-ESP32/discussions/2631)
+- SRC plus thermostats [#2636](https://github.com/emsesp/EMS-ESP32/issues/2636)
+- Greenstar 2000 [#2645](https://github.com/emsesp/EMS-ESP32/issues/2645)
+- RC3xx `dhw modetype` [#2659](https://github.com/emsesp/EMS-ESP32/discussions/2659)
+- new boiler entities VR0,VR1, compressor speed [#2669](https://github.com/emsesp/EMS-ESP32/issues/2669)
+- solar temperature TS16 [#2690](https://github.com/emsesp/EMS-ESP32/issues/2690)
+- pumpmode enum for HT3 boilers, add commands for manual defrost, chimneysweeper [#2727](https://github.com/emsesp/EMS-ESP32/issues/2727)
+- pid settings [#2735](https://github.com/emsesp/EMS-ESP32/issues/2735)
+- refresh MQTT button added to MQTT Settings page
+- heating assistance, rounding custum settings [#2763](https://github.com/emsesp/EMS-ESP32/discussions/2763)
+- added counter 0..2 for short pulses, high frequency [#2758](https://github.com/emsesp/EMS-ESP32/issues/2758)
+- added LWT (Last Will and Testament) to MQTT entities in Home Assistant
+- added api/metrics endpoint for prometheus integration by @gr3enk [#2774](https://github.com/emsesp/EMS-ESP32/pull/2774)
+- added RTL8201 to eth phy list [#2800](https://github.com/emsesp/EMS-ESP32/issues/2800)
+- added partitions to Web UI Version page, so previous firmware versions can be installed [#2837](https://github.com/emsesp/EMS-ESP32/issues/2837)
+- button pressures show LED. On a long press (10 seconds) the LED flashes for 5 seconds to indicate a factory reset is about to happen. [#2848](https://github.com/emsesp/EMS-ESP32/issues/2848)
+- added `txpause` command to pause the TX, by setting Txmode to 0 (disabled) [#2850](https://github.com/emsesp/EMS-ESP32/issues/2850)
+
+## Fixed
+
+- dhw/switchtime [#2490](https://github.com/emsesp/EMS-ESP32/issues/2490)
+- switch to secure mqtt [#2492](https://github.com/emsesp/EMS-ESP32/issues/2492)
+- update link buttons [#2497](https://github.com/emsesp/EMS-ESP32/issues/2497)
+- refresh scheduler states [#2502](https://github.com/emsesp/EMS-ESP32/discussions/2502)
+- also rebuild HA config on mqtt connect for scheduler, custom and shower
+- FB100 controls the hc, not the master [#2510](https://github.com/emsesp/EMS-ESP32/issues/2510)
+- IPM DHW module, [#2524](https://github.com/emsesp/EMS-ESP32/issues/2524)
+- charge optimization [#2543](https://github.com/emsesp/EMS-ESP32/issues/2543)
+- shower active state retained, shows correctly in HA
+- MQTT Command Topic with slashes [#2571](https://github.com/emsesp/EMS-ESP32/issues/2571)
+- Add pulsed water meter input to V1.3 gateway with Lilygo S3 [#2550](https://github.com/emsesp/EMS-ESP32/issues/2550)
+- fix missing long 10-second press of Button to perform a factory reset
+- fix wwMaxPower on Junkers ZBS14 [#2609](https://github.com/emsesp/EMS-ESP32/issues/2609)
+- ventilation bypass state from telegram 0x55C [#1197](https://github.com/emsesp/EMS-ESP32/issues/1197)
+- set selflowtemp for ems+ boilers [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
+- syslog timestamp [#2704](https://github.com/emsesp/EMS-ESP32/issues/2704)
+- fixed FS format command [#2720](https://github.com/emsesp/EMS-ESP32/discussions/2720)
+- dhw priority setting to boiler and mixer, telegrams 0x2CC, 0x2CD, etc.
+- check for valid GPIOs when board profile is changed [#2841](https://github.com/emsesp/EMS-ESP32/issues/2841)
+
+## Changed
+
+- show console log with ISO date/time [#2533](https://github.com/emsesp/EMS-ESP32/discussions/2533)
+- removed ESP32 CPU temperature
+- updated core libraries like AsyncTCP, AsyncWebServer and Modbus
+- remove command `scan deep`
+- ignore repeated `forceheatingoff` commands [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
+- optimized web for better performance by adding lazy loading and caching
+- internal system analog sensors (core_voltage, supply_voltage and gateway_temperature) cannot be accidentally removed
+- double click button reconnects EMS-ESP to AP
+- place system message command in side scheduler loop to reduce stack memory usage by 2KB
+- syslog mark interval set to 1 hour
+- handle process_telegram in oneloop
+- improved GPIO validation for Analog Sensors and System GPIOs
+- entities with no values are greyed out in the Web UI in the Customization page
+- added System Status to Web Status page
+- show number on entities and supported languages in log on boot
+- on tx read fail delay the 3rd. retry 2 sec
+- move vectors and lists to PSRAM
+- removed unused last topic/payload echo-check
+- added Home Assistant device details to MQTT Discovery for all devices
+- device_class and state_class changes for HA MQTT Discovery [#2825](https://github.com/emsesp/EMS-ESP32/issues/2825)

mock-api/pnpm-lock.yaml

@@ -0,0 +1,316 @@
+lockfileVersion: '9.0'
+
+settings:
+  autoInstallPeers: true
+  excludeLinksFromLockfile: false
+
+importers:
+
+  .:
+    dependencies:
+      '@msgpack/msgpack':
+        specifier: ^3.1.3
+        version: 3.1.3
+      '@trivago/prettier-plugin-sort-imports':
+        specifier: ^6.0.0
+        version: 6.0.0(prettier@3.7.4)
+      formidable:
+        specifier: ^3.5.4
+        version: 3.5.4
+      itty-router:
+        specifier: ^5.0.22
+        version: 5.0.22
+      prettier:
+        specifier: ^3.7.4
+        version: 3.7.4
+
+packages:
+
+  '@babel/code-frame@7.27.1':
+    resolution: {integrity: sha512-cjQ7ZlQ0Mv3b47hABuTevyTuYN4i+loJKGeV9flcCgIK37cCXRh+L1bd3iBHlynerhQ7BhCkn2BPbQUL+rGqFg==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/generator@7.28.5':
+    resolution: {integrity: sha512-3EwLFhZ38J4VyIP6WNtt2kUdW9dokXA9Cr4IVIFHuCpZ3H8/YFOl5JjZHisrn1fATPBmKKqXzDFvh9fUwHz6CQ==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-globals@7.28.0':
+    resolution: {integrity: sha512-+W6cISkXFa1jXsDEdYA8HeevQT/FULhxzR99pxphltZcVaugps53THCeiWA8SguxxpSp3gKPiuYfSWopkLQ4hw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-string-parser@7.27.1':
+    resolution: {integrity: sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-validator-identifier@7.28.5':
+    resolution: {integrity: sha512-qSs4ifwzKJSV39ucNjsvc6WVHs6b7S03sOh2OcHF9UHfVPqWWALUsNUVzhSBiItjRZoLHx7nIarVjqKVusUZ1Q==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/parser@7.28.5':
+    resolution: {integrity: sha512-KKBU1VGYR7ORr3At5HAtUQ+TV3SzRCXmA/8OdDZiLDBIZxVyzXuztPjfLd3BV1PRAQGCMWWSHYhL0F8d5uHBDQ==}
+    engines: {node: '>=6.0.0'}
+    hasBin: true
+
+  '@babel/template@7.27.2':
+    resolution: {integrity: sha512-LPDZ85aEJyYSd18/DkjNh4/y1ntkE5KwUHWTiqgRxruuZL2F1yuHligVHLvcHY2vMHXttKFpJn6LwfI7cw7ODw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/traverse@7.28.5':
+    resolution: {integrity: sha512-TCCj4t55U90khlYkVV/0TfkJkAkUg3jZFA3Neb7unZT8CPok7iiRfaX0F+WnqWqt7OxhOn0uBKXCw4lbL8W0aQ==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/types@7.28.5':
+    resolution: {integrity: sha512-qQ5m48eI/MFLQ5PxQj4PFaprjyCTLI37ElWMmNs0K8Lk3dVeOdNpB3ks8jc7yM5CDmVC73eMVk/trk3fgmrUpA==}
+    engines: {node: '>=6.9.0'}
+
+  '@jridgewell/gen-mapping@0.3.13':
+    resolution: {integrity: sha512-2kkt/7niJ6MgEPxF0bYdQ6etZaA+fQvDcLKckhy1yIQOzaoKjBBjSj63/aLVjYE3qhRt5dvM+uUyfCg6UKCBbA==}
+
+  '@jridgewell/resolve-uri@3.1.2':
+    resolution: {integrity: sha512-bRISgCIjP20/tbWSPWMEi54QVPRZExkuD9lJL+UIxUKtwVJA8wW1Trb1jMs1RFXo1CBTNZ/5hpC9QvmKWdopKw==}
+    engines: {node: '>=6.0.0'}
+
+  '@jridgewell/sourcemap-codec@1.5.5':
+    resolution: {integrity: sha512-cYQ9310grqxueWbl+WuIUIaiUaDcj7WOq5fVhEljNVgRfOUhY9fy2zTvfoqWsnebh8Sl70VScFbICvJnLKB0Og==}
+
+  '@jridgewell/trace-mapping@0.3.31':
+    resolution: {integrity: sha512-zzNR+SdQSDJzc8joaeP8QQoCQr8NuYx2dIIytl1QeBEZHJ9uW6hebsrYgbz8hJwUQao3TWCMtmfV8Nu1twOLAw==}
+
+  '@msgpack/msgpack@3.1.3':
+    resolution: {integrity: sha512-47XIizs9XZXvuJgoaJUIE2lFoID8ugvc0jzSHP+Ptfk8nTbnR8g788wv48N03Kx0UkAv559HWRQ3yzOgzlRNUA==}
+    engines: {node: '>= 18'}
+
+  '@noble/hashes@1.8.0':
+    resolution: {integrity: sha512-jCs9ldd7NwzpgXDIf6P3+NrHh9/sD6CQdxHyjQI+h/6rDNo88ypBxxz45UDuZHz9r3tNz7N/VInSVoVdtXEI4A==}
+    engines: {node: ^14.21.3 || >=16}
+
+  '@paralleldrive/cuid2@2.3.1':
+    resolution: {integrity: sha512-XO7cAxhnTZl0Yggq6jOgjiOHhbgcO4NqFqwSmQpjK3b6TEE6Uj/jfSk6wzYyemh3+I0sHirKSetjQwn5cZktFw==}
+
+  '@trivago/prettier-plugin-sort-imports@6.0.0':
+    resolution: {integrity: sha512-Xarx55ow0R8oC7ViL5fPmDsg1EBa1dVhyZFVbFXNtPPJyW2w9bJADIla8YFSaNG9N06XfcklA9O9vmw4noNxkQ==}
+    engines: {node: '>= 20'}
+    peerDependencies:
+      '@vue/compiler-sfc': 3.x
+      prettier: 2.x - 3.x
+      prettier-plugin-ember-template-tag: '>= 2.0.0'
+      prettier-plugin-svelte: 3.x
+      svelte: 4.x || 5.x
+    peerDependenciesMeta:
+      '@vue/compiler-sfc':
+        optional: true
+      prettier-plugin-ember-template-tag:
+        optional: true
+      prettier-plugin-svelte:
+        optional: true
+      svelte:
+        optional: true
+
+  asap@2.0.6:
+    resolution: {integrity: sha512-BSHWgDSAiKs50o2Re8ppvp3seVHXSRM44cdSsT9FfNEUUZLOGWVCsiWaRPWM1Znn+mqZ1OfVZ3z3DWEzSp7hRA==}
+
+  balanced-match@1.0.2:
+    resolution: {integrity: sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==}
+
+  brace-expansion@2.0.2:
+    resolution: {integrity: sha512-Jt0vHyM+jmUBqojB7E1NIYadt0vI0Qxjxd2TErW94wDz+E2LAm5vKMXXwg6ZZBTHPuUlDgQHKXvjGBdfcF1ZDQ==}
+
+  debug@4.4.3:
+    resolution: {integrity: sha512-RGwwWnwQvkVfavKVt22FGLw+xYSdzARwm0ru6DhTVA3umU5hZc28V3kO4stgYryrTlLpuvgI9GiijltAjNbcqA==}
+    engines: {node: '>=6.0'}
+    peerDependencies:
+      supports-color: '*'
+    peerDependenciesMeta:
+      supports-color:
+        optional: true
+
+  dezalgo@1.0.4:
+    resolution: {integrity: sha512-rXSP0bf+5n0Qonsb+SVVfNfIsimO4HEtmnIpPHY8Q1UCzKlQrDMfdobr8nJOOsRgWCyMRqeSBQzmWUMq7zvVig==}
+
+  formidable@3.5.4:
+    resolution: {integrity: sha512-YikH+7CUTOtP44ZTnUhR7Ic2UASBPOqmaRkRKxRbywPTe5VxF7RRCck4af9wutiZ/QKM5nME9Bie2fFaPz5Gug==}
+    engines: {node: '>=14.0.0'}
+
+  itty-router@5.0.22:
+    resolution: {integrity: sha512-9hmdGErWdYDOurGYxSbqLhy4EFReIwk71hMZTJ5b+zfa2zjMNV1ftFno2b8VjAQvX615gNB8Qxbl9JMRqHnIVA==}
+
+  javascript-natural-sort@0.7.1:
+    resolution: {integrity: sha512-nO6jcEfZWQXDhOiBtG2KvKyEptz7RVbpGP4vTD2hLBdmNQSsCiicO2Ioinv6UI4y9ukqnBpy+XZ9H6uLNgJTlw==}
+
+  js-tokens@4.0.0:
+    resolution: {integrity: sha512-RdJUflcE3cUzKiMqQgsCu06FPu9UdIJO0beYbPhHN4k6apgJtifcoCtT9bcxOpYBtpD2kCM6Sbzg4CausW/PKQ==}
+
+  jsesc@3.1.0:
+    resolution: {integrity: sha512-/sM3dO2FOzXjKQhJuo0Q173wf2KOo8t4I8vHy6lF9poUp7bKT0/NHE8fPX23PwfhnykfqnC2xRxOnVw5XuGIaA==}
+    engines: {node: '>=6'}
+    hasBin: true
+
+  lodash-es@4.17.22:
+    resolution: {integrity: sha512-XEawp1t0gxSi9x01glktRZ5HDy0HXqrM0x5pXQM98EaI0NxO6jVM7omDOxsuEo5UIASAnm2bRp1Jt/e0a2XU8Q==}
+
+  minimatch@9.0.5:
+    resolution: {integrity: sha512-G6T0ZX48xgozx7587koeX9Ys2NYy6Gmv//P89sEte9V9whIapMNF4idKxnW2QtCcLiTWlb/wfCabAtAFWhhBow==}
+    engines: {node: '>=16 || 14 >=14.17'}
+
+  ms@2.1.3:
+    resolution: {integrity: sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==}
+
+  once@1.4.0:
+    resolution: {integrity: sha512-lNaJgI+2Q5URQBkccEKHTQOPaXdUxnZZElQTZY0MFUAuaEqe1E+Nyvgdz/aIyNi6Z9MzO5dv1H8n58/GELp3+w==}
+
+  parse-imports-exports@0.2.4:
+    resolution: {integrity: sha512-4s6vd6dx1AotCx/RCI2m7t7GCh5bDRUtGNvRfHSP2wbBQdMi67pPe7mtzmgwcaQ8VKK/6IB7Glfyu3qdZJPybQ==}
+
+  parse-statements@1.0.11:
+    resolution: {integrity: sha512-HlsyYdMBnbPQ9Jr/VgJ1YF4scnldvJpJxCVx6KgqPL4dxppsWrJHCIIxQXMJrqGnsRkNPATbeMJ8Yxu7JMsYcA==}
+
+  picocolors@1.1.1:
+    resolution: {integrity: sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA==}
+
+  prettier@3.7.4:
+    resolution: {integrity: sha512-v6UNi1+3hSlVvv8fSaoUbggEM5VErKmmpGA7Pl3HF8V6uKY7rvClBOJlH6yNwQtfTueNkGVpOv/mtWL9L4bgRA==}
+    engines: {node: '>=14'}
+    hasBin: true
+
+  wrappy@1.0.2:
+    resolution: {integrity: sha512-l4Sp/DRseor9wL6EvV2+TuQn63dMkPjZ/sp9XkghTEbV9KlPS1xUsZ3u7/IQO4wxtcFB4bgpQPRcR3QCvezPcQ==}
+
+snapshots:
+
+  '@babel/code-frame@7.27.1':
+    dependencies:
+      '@babel/helper-validator-identifier': 7.28.5
+      js-tokens: 4.0.0
+      picocolors: 1.1.1
+
+  '@babel/generator@7.28.5':
+    dependencies:
+      '@babel/parser': 7.28.5
+      '@babel/types': 7.28.5
+      '@jridgewell/gen-mapping': 0.3.13
+      '@jridgewell/trace-mapping': 0.3.31
+      jsesc: 3.1.0
+
+  '@babel/helper-globals@7.28.0': {}
+
+  '@babel/helper-string-parser@7.27.1': {}
+
+  '@babel/helper-validator-identifier@7.28.5': {}
+
+  '@babel/parser@7.28.5':
+    dependencies:
+      '@babel/types': 7.28.5
+
+  '@babel/template@7.27.2':
+    dependencies:
+      '@babel/code-frame': 7.27.1
+      '@babel/parser': 7.28.5
+      '@babel/types': 7.28.5
+
+  '@babel/traverse@7.28.5':
+    dependencies:
+      '@babel/code-frame': 7.27.1
+      '@babel/generator': 7.28.5
+      '@babel/helper-globals': 7.28.0
+      '@babel/parser': 7.28.5
+      '@babel/template': 7.27.2
+      '@babel/types': 7.28.5
+      debug: 4.4.3
+    transitivePeerDependencies:
+      - supports-color
+
+  '@babel/types@7.28.5':
+    dependencies:
+      '@babel/helper-string-parser': 7.27.1
+      '@babel/helper-validator-identifier': 7.28.5
+
+  '@jridgewell/gen-mapping@0.3.13':
+    dependencies:
+      '@jridgewell/sourcemap-codec': 1.5.5
+      '@jridgewell/trace-mapping': 0.3.31
+
+  '@jridgewell/resolve-uri@3.1.2': {}
+
+  '@jridgewell/sourcemap-codec@1.5.5': {}
+
+  '@jridgewell/trace-mapping@0.3.31':
+    dependencies:
+      '@jridgewell/resolve-uri': 3.1.2
+      '@jridgewell/sourcemap-codec': 1.5.5
+
+  '@msgpack/msgpack@3.1.3': {}
+
+  '@noble/hashes@1.8.0': {}
+
+  '@paralleldrive/cuid2@2.3.1':
+    dependencies:
+      '@noble/hashes': 1.8.0
+
+  '@trivago/prettier-plugin-sort-imports@6.0.0(prettier@3.7.4)':
+    dependencies:
+      '@babel/generator': 7.28.5
+      '@babel/parser': 7.28.5
+      '@babel/traverse': 7.28.5
+      '@babel/types': 7.28.5
+      javascript-natural-sort: 0.7.1
+      lodash-es: 4.17.22
+      minimatch: 9.0.5
+      parse-imports-exports: 0.2.4
+      prettier: 3.7.4
+    transitivePeerDependencies:
+      - supports-color
+
+  asap@2.0.6: {}
+
+  balanced-match@1.0.2: {}
+
+  brace-expansion@2.0.2:
+    dependencies:
+      balanced-match: 1.0.2
+
+  debug@4.4.3:
+    dependencies:
+      ms: 2.1.3
+
+  dezalgo@1.0.4:
+    dependencies:
+      asap: 2.0.6
+      wrappy: 1.0.2
+
+  formidable@3.5.4:
+    dependencies:
+      '@paralleldrive/cuid2': 2.3.1
+      dezalgo: 1.0.4
+      once: 1.4.0
+
+  itty-router@5.0.22: {}
+
+  javascript-natural-sort@0.7.1: {}
+
+  js-tokens@4.0.0: {}
+
+  jsesc@3.1.0: {}
+
+  lodash-es@4.17.22: {}
+
+  minimatch@9.0.5:
+    dependencies:
+      brace-expansion: 2.0.2
+
+  ms@2.1.3: {}
+
+  once@1.4.0:
+    dependencies:
+      wrappy: 1.0.2
+
+  parse-imports-exports@0.2.4:
+    dependencies:
+      parse-statements: 1.0.11
+
+  parse-statements@1.0.11: {}
+
+  picocolors@1.1.1: {}
+
+  prettier@3.7.4: {}
+
+  wrappy@1.0.2: {}

src/emsesp_version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.8.0"
+#define EMSESP_APP_VERSION "3.8.0-dev.1"