andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-06 07:49:52 +03:00
Code Issues Packages Projects Releases Wiki Activity
Files
cbecebd80a4b10406ebf2266b203f395017e78d6
EMS-ESP32/CHANGELOG.md

25 KiB
Raw Blame History

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[3.5.0] February 6 2023

IMPORTANT! BREAKING CHANGES

  • When upgrading to v3.5 for the first time from v3.4 on a BBQKees Gateway board you will need to use the EMS-EPS Flasher to correctly re-partition the flash. Make sure you backup the settings and customizations from the WebUI (System->Upload/Download) and restore after the upgrade.

Added

  • Translations in Web UI and all device entity names (DE, NL, SV, PL, NO, FR) #22
  • Add support for Lolin C3 mini #620
  • Add support for ESP32-S2 #667
  • Add devices: Greenstar 30Ri boiler, Junkers FW500 thermostat, Buderus BC30 controller
  • Add program memory info
  • Add mqtt queue and connection infos
  • Adapt min/max if ems-value is not in this range
  • Add heat pump settings for inputs and limits #600
  • Add hybrid heatpump #500
  • Add translated tags
  • Add min/max to customization table #686
  • Add MD5 check #637
  • Add more bus-ids #673
  • Use HA connectivity device class for Status, added boot time #751
  • Add commands for analog sensors outputs
  • Support for multiple EMS-ESPs with MQTT and HA [#759]
  • Settings for heatpump silent mode and additional heater [#802] [#803]
  • Zone module MZ100 #826
  • Default MQTT hostname is blank #829
  • wwCurFlow for ems+ devices #829
  • Add Rego 3000, TR120RF thermostats #917
  • Add config for ESP32-S3
  • Add heatpump silent mode and other entities #896
  • Allow reboot to other partition (factory or asymetric OTA)
  • Blacklist entities to remove from memory #891
  • Add boiler pump operating mode #944

Fixed

  • Factory Reset not working #628
  • Valid 4 byte values #820
  • Commands for multiple thermostats #826
  • API queries for multiple devices #865
  • Console crash when using call with command hcx only. #841
  • heatingPump2Mod was wrong, changed to absBurnPow [#908
  • Rounding of web input values
  • Analog sensor with single gpio number #915
  • HA dallas and analog configs: remove/rebuild on change #888
  • Modes and set seltemp for RC30 and RC20 #932

Changed

  • Discovery in HomeAssistant don't work with custom base topic. #596 Base topic containing / are changed to _
  • RF room temperature sensor are shown as thermostat
  • Render mqtt float json values with trailing zero
  • Removed flash strings, to increase available heap memory
  • Reload page after restart button is pressed
  • Analog/dallas values command as list like ems-devices
  • Analog/dallas HA-entities based on id
  • MQTT Base is a mandatory field. Removed MQTT topic length from settings
  • HA duration class for time entities [#822
  • AM200 alternative heatsource as class heatsource [#857

[3.4.2] September 18 2022

Added

  • RC310 additions #520
    • damping
    • wwprio for RC310 heating circuits
    • switchonoptimization for RC310 heating circuits
    • enum_controlmode for RC310 (new enum list)
    • nofrostmode, reducemode, reducetemp & noreducetemp for RC310
    • emergencyops and emergencytemp, wwmaxtemp, wwflowtempoffset and wwcomfort1 for RC310
    • HM200 hybrid module #500
    • AM200 alternative heatsource module #573
    • EM10 error module as gateway #575

Fixed

  • fix Table resizing in WebUI #519
  • allow larger customization files #570
  • losing entitiy wwcomfort #581

Changed

  • Shorten "friendly names" in Home Assistant #555
  • platformio 2.3.0 (IDF 4, Arduino 2)
  • remove master-thermostat, support multiple thermostats
  • merge up- and download in webui #577

[3.4.1] May 29 2022

Fixed

  • Fix memory leak in api #524

Changed

  • Controller data in web-ui only for IVT #522
  • Rename hidden climate to a more explaining name #523
  • Minor changes to the Customizations web page #527

[3.4.0] May 23 2022

Added

  • WebUI optimizations, updated look&feel and better performance #124
  • Auto refresh of WebUI after successful firmware upload #178
  • New Customization Service in WebUI. First feature is the ability to enable/disabled Enitites (device values) from EMS devices #206
  • Option to disable Telnet Console #209
  • Added Hide SSID, Max Clients and Preferred Channel to Access Point
  • Merged in MichaelDvP's changes like Fahrenheit conversion, publish single (for IOBroker) and a few other critical optimizations
  • Enabled bi-directional read/write with Home Assistant, so values can be changed automatically from the UI without scripting #265
  • Added GC7000F Boiler #270
  • Revised LED flash sequence on boot up to show system health (1 flash=no ems, 2 flashes=no wifi) #224
  • Analog Sensor support #271
  • Solar cylinder priority #247
  • Read only mode in Settings, where EMS Tx/Write commands are blocked #286
  • Added 8700i Boiler device
  • Added Cascade CM10 Controller device
  • Add Olimex ESP32-POE-ISO to board profiles plus settings to customize Ethernet modules #301
  • Help text for string commands in WebUI #320
  • Germany translations (at compile time)
  • #entities added to system/info` endpoint #322
  • analog outputs digital/pwm/dac
  • remove MQTT retained configs if discovery is disabled
  • timeout 10 min for MQTT-QoS wait
  • Moduline 300 auto-temperatures T1-T4, RC300 romminfluencefactor
  • RC35 parameters #392, #398
  • sync time with thermostat #386, #408
  • set mode has immediate effect #395
  • min/max in web value setting
  • Extend customization to select if an entity is to be shown in the WebUI or forced as read-only #317
  • Added Moduline 400 installation parameters PR #449 by @kwertie01
  • Read time from IVT-controller #439
  • Hybrid Heatpump product-id 168 #459, thermostat settings
  • Junkers ISM2 and IPM in warm water mode #437
  • Added Shower Alert trigger time and cold shot time #436
  • Improved Table layout in Web UI (searching, filtering, sorting, exporting to CSV)
  • API fetch individual attributes from an entity #462
  • Option to disable mDNS
  • Option for rendering booleans on dashboard #456
  • Upload customization settings from a file #256

Fixed

  • lastcode broke MQTT JSON structure #228
  • fixed issue with overlapping while reading sequence of EMS1.0 telegrams
  • fixed redundant telegram readings (because of offset overflow)
  • added missing RC30/Moduline 400 #243
  • Correct modes for RC25 #106
  • Clean up old HA config's in MQTT before publishing data. This will prevent HA giving the 'dict' warnings #229
  • RC25 temperature setting #272
  • Buderus RC25 - "hc1 mode type" incorrect value #273
  • Increased number of Mixers and Heating Circuits #294
  • Check receive status before removing a telegram fetch #268, #282
  • Fix uploading firmware on OSX #345
  • Non-nested MQTT would corrupt the json #354
  • Burner selected max power can have a value higher than 100% #314
  • some missing fahrenheit calculations
  • limited number of exclusions #339
  • MQTT sometimes would not reconnect after a WiFi outage

Changed

  • Use flash system to show system health (1 flash=no ems, 2 flashes=no wifi) #224
  • Renamed Dallas Sensor to Temperature Sensor in UI
  • Dallas Format removed. Use the name to give each sensor an alias
  • No longer MQTT subscribes to topic /thermostat_hc<n> as it supports a path similar to the API endpoint construct
  • Show Sensors quality in WebUI
  • Controller not shown in WebUI dashboard
  • renamed "Home Assistant Integration" to "MQTT Discovery" in MQTT Settings #290
  • Show ems tx reads and writes separately
  • Show ems device handlers separated for received, fetched and pending handlers.
  • Wired renamed to Ethernet
  • removed system/pin command, new commands in analogsensors
  • system/info device-info split to name/version/brand
  • exclude list uses short-names, possible flags for web/api/mqtt excludes, readonly and favorite (selection not yet implemented)
  • thermostat clock formate date-time: dd.mm.yyyy hh:mm
  • RC300 summermode as other thermostats winter/summer instead of off/on

BREAKING CHANGES:

  • Settings:
    • order of Boolean Format has changed in Application Settings - check your settings
    • Dallas Format setting removed. Now customize name of each Dallas sensor via the UI
  • MQTT/API
    • Boiler wwheat renamed to ww3wayon #211
    • Boiler ww tag renamed to dhw. Any custom Home Assistant lovelace dashboards will need updating.
    • Renamed description of wwtapactivated to "turn on/off DHW". Otherwise would have looked like "boiler_dhw_turn_on_off_dhw" in HA.
    • /api/system/info endpoint has updated keys. Now lowercase, no underscores and not capitalized. Replace "handlers" with "handlers received", "handlers fetched" and "handlers pending".

[3.3.1] January 20 2022

  • lastcode broke MQTT JSON structure #228
  • overlapping while reading sequence of EMS1.0 telegrams
  • redundant telegram readings (because of offset overflow)
  • added missing RC30/Moduline400 #243
  • check received status before toggling fetch on empty telegram [#268][#282]

[3.3.0] November 28 2021

Added

  • Add system commands for syslog level and watch #98
  • Added pool data to telegrams 0x494 & 0x495 #102
  • Add RC300 second summermode telegram #108
  • Add support for the RC25 thermostat #106
  • Add new command 'entities' for a device, e.g. http://ems-esp/api/boiler/entities to show the shortname, description and HA Entity name (if HA enabled) #116
  • Support for Junkers program and remote (fb10/fb110) temperature
  • Home Assistant state_class attribute for Wh, kWh, W and KW #129
  • Add current room influence for RC300 #136
  • Added Home Assistant device_class to sensor entities
  • Added another Buderus RC10 thermostat with Product ID 65 #160
  • Added support for mDNS #161
  • Added last system ESP32 reset code to log (and system info output)
  • Firmware Checker in WebUI #168
  • Added new MQTT setting for enabling 'response' topic
  • Support for non-standard Thermostats like Tado #174
  • Include MQTT connection status in 'api/system/info'
  • Include Network status in 'api/system/info' and also the MQTT topic info #202
  • Added Ethernet PHY module as an option in the Board Profile #210

Fixed

  • MQTT reconnecting after WiFi reconnect #99
  • Manually Controlling Solar Circuit #107
  • Fix thermostat commands not defaulting to the master thermostat #110
  • Enlarge parse-buffer for long names like cylinderpumpmodulation
  • MQTT not subscribing to all device entities #166
  • Help fix issues with WebUI unable to fully load UI over Ethernet #177
  • Shower alert never reset after limit reached when enabled [(PR #185)]
  • Remove HA entity entries when a device value goes dormant #196
  • deciphering last error code dates on 0xC2 telegram #204

Changed

  • Syslog BOM only for utf-8 messages #91
  • Check for KM200 by device-id 0x48, remove tx-delay #90
  • rename fastheatupfactor to fastheatup and add percent #122
  • "unit" renamed to "uom" in API call to recall a Device Value
  • initial backend React changes to replace the class components (HOCs) with React Hooks
  • Use program-names instead of numbers
  • Boiler's maintenancemessage always published in MQTT (to prevent HA missing entity)
  • Unit of Measure 'times' added to MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
  • Improved API. Restful HTTP API works in the same way as MQTT calls
  • Removed settings for MQTT subscribe format #173
  • Improve Nefit Moduline 200 functionality #183
  • status in the MQTT heartbeat renamed to bus_status
  • Layout changes in the WebUI, showing stripped table rows in Dashboard
  • Alternative font for log window #219

BREAKING CHANGES

  • API: "unit" renamed to "uom" in API call to recall a Device Value
  • HA: sensor.boiler_boiler_temperature renamed to sensor.actual_boiler_temperature
  • HA: binary_sensor.boiler_ww_disinfecting renamed to binary_sensor.boiler_ww_disinfection
  • HA: # removed from counts in MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
  • txread renamed to txreads and txwrite renamed to txwrites in MQTT heartbeat payload
  • 'dallas sensors' in api/system/info moved to the "System" section. Renamed "uptime (seconds)" and "reset reason"
  • status in the MQTT heartbeat renamed to bus_status

[3.2.1] August 8 2021

Added

  • json body in API can now take device, name, cmd, hc and id
  • added example of how to use API directly to control values from Home Assistant
  • API calls are shown in debug log (For troubleshooting)

Fixed

  • fixed issue with Home Assistant entity naming where boiler's ww was duplicated in entity name
  • fixed issue where wwSetTemp was written too instead of wwSelTemp

Changed

  • fixed case on mqtt names, like 'wwtankmiddletemp'
  • renamed Product ID to 'EMS Product ID' in Home Assistant
  • removed brackets around tags, e.g. (hc1) selected room temperature" is now just "hc1 selected room temperature"

[3.2.0] August 6 2021

Added

  • support for IPv6 (web/api/mqtt, not syslog yet) #83
  • System Log in Web UI will show current time if the NTP Service is enabled #82
  • Network settings for Tx-power, WiFi-bandwidth, WiFi-sleepmode #83
  • optional low CPU clockrate (160 MHz) #83
  • select format for enumerated values in web
  • settings for water hysteresis on/off
  • dallas sensor name editable. sensorname console-command, replace sensorid with a unique name #84
  • 'restart' system command. Can be invoked via API with authentication. #87
  • add Download button in Web UI for log

Fixed

  • set mode allow numbers
  • Junkers thermostat shows mode as selected by set_mode
  • HA thermostat mode if bool-format: numbers is selected
  • Web UI System Log sometimes skipped a few log messages when watching real-time
  • fix wwactivated #89
  • don't show commands (like reset) as Device values in the Web or Console

Changed

  • removed Rx echo failures counting as incomplete telegrams. Bad telegrams show as Warning and not Errors. #80
  • add upload_sec to api/system/info and removed # from some names to keep consistent with MQTT heartbeat
  • added debug target to PlatformIO build to help hunt down system crashes
  • enumerated values always start at zero
  • maintenance settings for time/date as extra setting
  • move api/mqtt formats to settings, add enum format
  • UI improvements for editing Dallas Sensor details
  • RESTful GET commands can also require authentication (via bearer access token) for better security
  • Updated AsyncMqttClient to 0.9.0 and ArduinoJson to 6.18.3
  • Download buttons for settings and info under the Help tab

[3.1.1] June 26 2021

Added

  • new command called commands which lists all available commands. ems-esp/api/{device}/commands
  • More Home Assistant icons to match the UOMs
  • new API. Using secure access tokens and OpenAPI standard. See doc/EMS-ESP32 API.md and #50
  • show log messages in Web UI #71

Fixed

  • HA thermostat mode was not in sync with actual mode #66
  • Don't publish rssi if Wifi is disabled and ethernet is being used
  • Booleans are shown as true/false in API GETs

Changed

  • info command always shows full names in API. For short names query the device or name directly, e.g. http://ems-esp/api/boiler
  • free memory is shown in kilobytes
  • boiler's warm water entities have ww added to the Home Assistant entity name #67
  • improved layout and rendering of device values in the WebUI, also the edit value screen

[3.1.0] May 4 2021

Added

  • Mock API to simulate an ESP, for testing web
  • Able to write values from the Web UI
  • check values with "cmd":<valuename> and data empty or ?
  • set hc for values and commands by id or prefix hc<x>+separator, separator can be any char

Fixed

  • Don't create Home Assistant MQTT discovery entries for device values that don't exists (#756 on EMS-ESP repo)
  • Update shower MQTT when a shower start is detected
  • S32 board profile

Changed

  • Icon for Network
  • MQTT Formatting payload (nested vs single) is a pull-down option
  • moved mqtt-topics and texts to local_EN, all topics lower case
  • Re-enabled Shower Alert (still experimental)
  • lowercased Flow temp in commands
  • system console commands to main

[3.0.1] March 30 2021

Added

  • individual mqtt commands (#31)
  • board Profiles (#11)

Fixed

  • Rx and Tx quality % would sometimes show > 100

Changed

  • invert LED changed to Hide LED. Default is off.
  • renamed Scan Network to Scan WiFi Network
  • added version to cmd=settings
  • Allow both WiFi and Ethernet together, fall back to AP when Ethernet disconnects

Removed

  • Shower Alert (disabled for now)

[3.0.0] March 18 2021

Added

  • Power settings, disabling BLE and turning off Wifi sleep
  • Rx and Tx counts to Heartbeat MQTT payload
  • Ethernet support
  • id to info command to show only a heatingcircuit
  • add sending devices that are not listed to 0x07
  • extra MQTT boolean option for "ON" and "OFF"
  • Support for chunked MQTT payloads to allow large data sets > 2kb
  • External Button support (#708) for resetting to factory defaults and other actions
  • new console set command in system, set ethernet <profile> for quickly enabling cabled ethernet connections without using the captive wifi portal
  • Added in MQTT nested mode, for thermostat and mixer, like we had back in v2
  • Cascade MC400 (product-id 210) (3.0.0b6)
  • values for wwMaxPower, wwFlowtempOffset
  • RC300 thermostat temp -1 to clear temporary setpoint in auto mode
  • Syslog port selectable (#744)

Fixed

  • telegrams matched to masterthermostat 0x18
  • multiple roomcontrollers
  • readback after write with delay (give ems-devices time to set the value)
  • Thermostat ES72/RC20 device 66 to command-set RC20_2
  • MQTT payloads not adding to queue when MQTT is re-connecting (fixes #369)
  • fix for HA topics with invalid command formats (#728)
  • wrong position of values #723, #732
  • OTA Upload via Web on OSX

Changed

  • changed how telegram parameters are rendered for mqtt, console and web (#632)
  • split show values in smaller packages (edited)
  • extended length of IP/hostname from 32 to 48 chars (#676)
  • check flowsensor for tap_water_active
  • mqtt prefixed with Base
  • count Dallas sensor fails
  • switch from SPIFFS to LITTLEFS
  • Added ID to MQTT payloads which is the Device's product ID and used in HA to identify a unique HA device
  • Increased MQTT buffer and reduced wait time between publishes
  • Updated to the latest ArduinoJson library
  • some names of mqtt-tags like in v2.2.1
  • new ESP32 partition side to allow for smoother OTA and fallback
  • Network Gateway IP is optional (#682)emsesp/EMS-ESP
  • moved to a new GitHub repo https://github.com/emsesp/EMS-ESP32