Merge pull request #33 from livello/IS-ENC

lib_ignore, build_flags, DHT, counter, domoticz, WITH_PRINTEX_LIB, arduino_arch,
2026-01-28 17:19:06 +03:00 · 2018-10-18 23:05:57 +03:00
parent 02af69ba83 2ff511be35
commit 3e3d8e6d84
28 changed files with 380 additions and 313 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -3,3 +3,10 @@
 .clang_complete
 .gcc-flags.json
 CMakeListsPrivate.txt
+build_flags_due.sh
+build_flags_esp32.sh
+build_flags_esp8266.sh
+build_flags_stm32.sh
+build_flags_due-5500.sh
+build_flags_mega2560.sh
+build_flags_controllino.sh
--- a/README.md
+++ b/README.md
@@ -151,11 +151,11 @@ platformio device monitor -b 115200
 * ESP_WIFI_AP=MYAP // esp wifi access point name
 * ESP_WIFI_PWD=MYPWD // esp wifi access point password
 * WIFI_MANAGER_DISABLE //Disable wifi manager for esp8266
-* DHT_DISABLE //disable DHT Input support
+* DHT_COUNTER_DISABLE //disable DHT, Counter, Uptime input support (for RAM savings on mega2560)
 * RESTART_LAN_ON_MQTT_ERRORS //reinit LAN if many mqtt errors occured
-* WITH_STREAMING_LIB use streaming libriary for serial debug output otherwise use PrintEx library
 * DEVICE_NAME short handy device name which is used instead of mac for download config http://{MY_CONFIG_SERVER}/{DEVICE_NAME}_config.json
 * SYSLOG_ENABLE enable UDP SYSLOG support feature(under DEVELOPMENT) that must be configured through config file
+* WITH_PRINTEX_LIB use PrintEx library (develop experimental feature)



@@ -176,11 +176,11 @@ platformio device monitor -b 115200
 * Defailt MQTT input topic: /myhome/in
 * Default MQTT topic to publish device status: /myhome/s_out
 * Default Alarm output topic /alarm
-* DHT support enabled
+* DHT, Counter, Uptime support enabled
 * Wifi manager for esp8266 enabled
 * RESTART_LAN_ON_MQTT_ERRORS disabled
-* WITH_STREAMING_LIB disabled
 * DEVICE_NAME disabled
 * SYSLOG_ENABLE disabled
+* WITH_PRINTEX_LIB diabled, using Streaming library

 If you've using Arduino IDE to compile & flash firmware, it will use Default options above and you will not able to configure additional compilers options except edit "options.h" file
--- a/build_flags_due-5500.sh
+++ b/build_flags_due-5500.sh
@@ -1,31 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh build_flags_ENVNAME.sh
-# then edit, change or comment something
- export FLAGS="-DMY_CONFIG_SERVER=lazyhome.ru"
- #export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
- export FLAGS="$FLAGS -DWiz5500"
- #export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:ff"
-# export FLAGS="$FLAGS -DDMX_DISABLE"
-# export FLAGS="$FLAGS -DARTNET_ENABLE"
-# export FLAGS="$FLAGS -DMODBUS_DISABLE"
-# export FLAGS="$FLAGS -DOWIRE_DISABLE"
-# export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DESP_WIFI_AP=MYAP"
-# export FLAGS="$FLAGS -DESP_WIFI_PWD=MYPWD"
-# export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
-# export FLAGS="$FLAGS -DDHT_DISABLE"
-# export FLAGS="$FLAGS -DRESET_PIN=5"
-# export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
-# export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
-# export FLAGS="$FLAGS -DW5500_CS_PIN=53"
- export FLAGS="$FLAGS -DWITH_STREAMING_LIB"
- export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
- echo $FLAGS
--- a/build_flags_mega2560-net.sh
+++ b/build_flags_mega2560-net.sh
@@ -1,31 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh build_flags_ENVNAME.sh
-# then edit, change or comment something
- export FLAGS="-DMY_CONFIG_SERVER=lazyhome.ru"
- #export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
- #export FLAGS="$FLAGS -DWiz5500"
- #export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:fe"
-# export FLAGS="$FLAGS -DDMX_DISABLE"
-# export FLAGS="$FLAGS -DARTNET_ENABLE"
-# export FLAGS="$FLAGS -DMODBUS_DISABLE"
-# export FLAGS="$FLAGS -DOWIRE_DISABLE"
-# export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DESP_WIFI_AP=MYAP"
-# export FLAGS="$FLAGS -DESP_WIFI_PWD=MYPWD"
-# export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
- export FLAGS="$FLAGS -DDHT_DISABLE"
-# export FLAGS="$FLAGS -DRESET_PIN=5"
-# export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
-# export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
-# export FLAGS="$FLAGS -DW5500_CS_PIN=53"
- export FLAGS="$FLAGS -DWITH_STREAMING_LIB"
- export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
- echo $FLAGS
--- a/build_flags_mega2560.sh
+++ b/build_flags_mega2560.sh
@@ -1,32 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh build_flags_ENVNAME.sh
-# then edit, change or comment something
- export FLAGS="-DMY_CONFIG_SERVER=lazyhome.ru"
- #export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
- #export FLAGS="$FLAGS -DWiz5500"
- #export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:ed"
-# export FLAGS="$FLAGS -DDMX_DISABLE"
-# export FLAGS="$FLAGS -DARTNET_ENABLE"
-# export FLAGS="$FLAGS -DMODBUS_DISABLE"
- export FLAGS="$FLAGS -DOWIRE_DISABLE"
-# export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DESP_WIFI_AP=MYAP"
-# export FLAGS="$FLAGS -DESP_WIFI_PWD=MYPWD"
-# export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
- export FLAGS="$FLAGS -DDHT_DISABLE"
-# export FLAGS="$FLAGS -DRESET_PIN=5"
-# export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
-# export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
-# export FLAGS="$FLAGS -DW5500_CS_PIN=53"
-# export FLAGS="$FLAGS -DINTERVAL_CHECK_INPUT=20"
-# export FLAGS="$FLAGS -DMODBUS_DIMMER_PARAM=SERIAL_8N1"
- export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
- echo $FLAGS
--- a/check_custom_build_flags_controllino.sh
+++ b/check_custom_build_flags_controllino.sh
@@ -0,0 +1,8 @@
+#! /bin/bash
+export FLAGS="$FLAGS -DCONTROLLINO"
+export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:07"
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_controllino.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_due-5500.sh
+++ b/check_custom_build_flags_due-5500.sh
@@ -0,0 +1,8 @@
+#! /bin/bash
+export FLAGS="$FLAGS -DWiz5500"
+export FLAGS="$FLAGS -DARTNET_ENABLE"
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_due-5500.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_due.sh
+++ b/check_custom_build_flags_due.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_due.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_esp32.sh
+++ b/check_custom_build_flags_esp32.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_esp32.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_esp8266.sh
+++ b/check_custom_build_flags_esp8266.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_esp8266.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_mega2560-net.sh
+++ b/check_custom_build_flags_mega2560-net.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_mega2560-net.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_mega2560.sh
+++ b/check_custom_build_flags_mega2560.sh
@@ -0,0 +1,9 @@
+#! /bin/bash
+CUSTOM_BUILD_FLAGS_FILE="custom-build-flags/build_flags_mega2560.sh"
+#CUSTOM_BUILD_FLAGS_FILE="custom-build-flags/build_flags_$PIOENV.sh"
+#echo $PIOENV > custom-build-flags/1.txt
+#TODO: make one file for all envs
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/check_custom_build_flags_stm32.sh
+++ b/check_custom_build_flags_stm32.sh
@@ -0,0 +1,6 @@
+#! /bin/bash
+CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_stm32.sh
+if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
+    source $CUSTOM_BUILD_FLAGS_FILE
+fi
+ echo $FLAGS
--- a/custom-build-flags/build_flags_controllino.sh
+++ b/custom-build-flags/build_flags_controllino.sh
@@ -0,0 +1,31 @@
+#! /bin/bash
+# usage:
+# first make your own copy of template
+# cp build_flags_template.sh my_build_flags.sh
+# then edit, change or comment something
+# nano  my_build_flags.sh
+# and source it
+# source my_build_flags.sh
+ export FLAGS="-DMY_CONFIG_SERVER=lighthub.elistech.ru"
+ export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
+ #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
+ #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
+ export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
+# export FLAGS="$FLAGS -DWiz5500"
+ export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
+ export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=C2:3E:1f:03:1B:1E"
+# export FLAGS="$FLAGS -DDMX_DISABLE"
+# export FLAGS="$FLAGS -DMODBUS_DISABLE"
+# export FLAGS="$FLAGS -DOWIRE_DISABLE"
+ #export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
+ #export FLAGS="$FLAGS -DCONTROLLINO"
+# export FLAGS="$FLAGS -DRESET_PIN=8"
+ export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
+# export FLAGS="$FLAGS -DESP_WIFI_AP=vent"
+# export FLAGS="$FLAGS -DESP_WIFI_PWD=kk007remont"
+# export FLAGS="$FLAGS -DSYSLOG_ENABLE"
+ export FLAGS="$FLAGS -DDEVICE_NAME=kk007_mega2560"
+export FLAGS="$FLAGS -DDHT_COUNTER_DISABLE"
+#export FLAGS="$FLAGS -DWITH_DOMOTICZ"
+#export FLAGS="$FLAGS -DWITH_PRINTEX_LIB"
+ export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
--- a/custom-build-flags/build_flags_template.sh
+++ b/custom-build-flags/build_flags_template.sh
@@ -20,12 +20,13 @@
 # export FLAGS="$FLAGS -DESP_WIFI_AP=MYAP"
 # export FLAGS="$FLAGS -DESP_WIFI_PWD=MYPWD"
 # export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
-# export FLAGS="$FLAGS -DDHT_DISABLE"
 # export FLAGS="$FLAGS -DRESET_PIN=5"
 # export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
 # export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
 # export FLAGS="$FLAGS -DW5500_CS_PIN=53"
 #export FLAGS="$FLAGS -DSYSLOG_ENABLE"
 #export FLAGS="$FLAGS -DDEVICE_NAME=MYDEVICE"
+#export FLAGS="$FLAGS -DDHT_COUNTER_DISABLE"
+#export FLAGS="$FLAGS -DWITH_PRINTEX_LIB"
 export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
 echo $FLAGS
--- a/lighthub/dmx.cpp
+++ b/lighthub/dmx.cpp
@@ -23,7 +23,7 @@ e-mail    anklimov@gmail.com
 #include "options.h"

 #ifdef _dmxin
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 #include <DMXSerial.h>
 #endif
 #endif
@@ -207,7 +207,7 @@ void DMXinSetup(int channels)

 #if defined(_dmxin)
   DMXin = new uint8_t [channels];
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
   DMXSerial.init(DMXReceiver,0,channels);
    if (DMXSerial.getBuffer()) {Serial.print(F("Init in ch:"));Serial.println(channels);} else Serial.println(F("DMXin Buffer alloc err"));
   //DMXSerial.maxChannel(channels);
@@ -230,7 +230,7 @@ dmxin.begin();
 void DMXoutSetup(int channels)
 {
 #ifdef _dmxout
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 DmxSimple.usePin(AVR_DMXOUT_PIN);
 DmxSimple.maxChannel(channels);
 #endif
--- a/lighthub/dmx.h
+++ b/lighthub/dmx.h
@@ -33,7 +33,7 @@ e-mail    anklimov@gmail.com

 #if defined(_dmxout)

-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 #include <DmxSimple.h>
 #define DmxWrite DmxSimple.write
 #endif
@@ -56,7 +56,7 @@ extern Artnet *artnet;
 #endif

 #ifdef _dmxin
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 #include <DMXSerial.h>
 #endif
 #endif
--- a/lighthub/inputs.cpp
+++ b/lighthub/inputs.cpp
@@ -23,9 +23,10 @@ e-mail    anklimov@gmail.com
 #include "utils.h"
 #include <PubSubClient.h>

-#ifndef DHT_DISABLE
-#if defined(ESP8266) || defined(ARDUINO_ARCH_ESP32)
+#ifndef DHT_COUNTER_DISABLE
+#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
 #include <DHTesp.h>
+
 #else
 #include "DHT.h"
 #endif
@@ -33,14 +34,14 @@ e-mail    anklimov@gmail.com

 extern PubSubClient mqttClient;

+#ifndef DHT_COUNTER_DISABLE
 static volatile unsigned long nextPollMillisValue[5];
 static volatile int nextPollMillisPin[5] = {0,0,0,0,0};
-
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 static volatile long counter_value[6];
 #endif

-#if defined(ESP8266)
+#if defined(ARDUINO_ARCH_ESP8266)
 static volatile long counter_value[6];
 #endif

@@ -53,6 +54,9 @@ static short counter_irq_map[54];
    static long counter_value[54];
    static int counters_count;
 #endif
+#endif
+
+
 Input::Input(char * name) //Constructor
 {
  if (name)
@@ -87,31 +91,24 @@ void Input::Parse()
    store = NULL;
    inType = 0;
    pin = 0;
-
    if (inputObj && (inputObj->type == aJson_Object)) {
        aJsonObject *s;
-
        s = aJson.getObjectItem(inputObj, "T");
        if (s) inType = static_cast<uint8_t>(s->valueint);
-
        pin = static_cast<uint8_t>(atoi(inputObj->name));
-
        s = aJson.getObjectItem(inputObj, "S");
        if (!s) {
-            Serial.print(F("In: "));
-            Serial.print(pin);
-            Serial.print(F("/"));
-            Serial.println(inType);
+            debugSerial<<F("In: ")<<pin<<F("/")<<inType<<endl;
            aJson.addNumberToObject(inputObj, "S", 0);
            s = aJson.getObjectItem(inputObj, "S");
        }
-
        if (s) store = (inStore *) &s->valueint;
    }
 }

 int Input::poll() {
    if (!isValid()) return -1;
+    #ifndef DHT_COUNTER_DISABLE
    if (inType & IN_DHT22)
        dht22Poll();
    else if (inType & IN_COUNTER)
@@ -121,13 +118,16 @@ int Input::poll() {
    else
        contactPoll();
    return 0;
+    #endif
+    contactPoll();
 }

+#ifndef DHT_COUNTER_DISABLE
 void Input::counterPoll() {
    if(nextPollTime()>millis())
        return;
    if (store->logicState == 0) {
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 #define interrupt_number pin
        if (interrupt_number >= 0 && interrupt_number < 6) {
            const short mega_interrupt_array[6] = {2, 3, 21, 20, 19, 18};
@@ -150,7 +150,7 @@ void Input::counterPoll() {
        return;
    }
    long counterValue = counter_value[pin];
-    Serial.print(F("IN:"));Serial.print(pin);Serial.print(F(" Counter type. val="));Serial.print(counterValue);
+    debugSerial<<F("IN:")<<(pin)<<F(" Counter type. val=")<<counterValue;

    aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
    if (emit) {
@@ -160,16 +160,18 @@ void Input::counterPoll() {
        sprintf(valstr, "%d", counterValue);
        mqttClient.publish(addrstr, valstr);
        setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT);
-        Serial.print(F(" NextPollMillis="));Serial.println(nextPollTime());
+        debugSerial<<F(" NextPollMillis=")<<nextPollTime();
    }
    else
-        Serial.print(F(" No emit data!"));
+        debugSerial<<F(" No emit data!");
 }
+#endif

+#ifndef DHT_COUNTER_DISABLE
 void Input::attachInterruptPinIrq(int realPin, int irq) {
    pinMode(realPin, INPUT);
    int real_irq;
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
    real_irq = irq;
 #endif
 #if defined(__SAM3X8E__)
@@ -200,32 +202,39 @@ void Input::attachInterruptPinIrq(int realPin, int irq) {
        }
 }

+
 void Input::dht22Poll() {
-#ifndef DHT_DISABLE
-    if(nextPollTime()>millis())
+    if (nextPollTime() > millis())
        return;
-#if defined(ESP8266) || defined(ARDUINO_ARCH_ESP32)
+#if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
    DHTesp dhtSensor;
    dhtSensor.setup(pin, DHTesp::DHT22);
    TempAndHumidity dhtSensorData = dhtSensor.getTempAndHumidity();
-    float temp = dhtSensorData.temperature;
-    float humidity = dhtSensorData.humidity;
+    float temp = roundf(dhtSensorData.temperature * 10) / 10;
+    float humidity = roundf(dhtSensorData.humidity);
 #else
    DHT dht(pin, DHT22);
    float temp = dht.readTemperature();
    float humidity = dht.readHumidity();
 #endif
    aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
-    Serial.print(F("IN:"));
-    Serial.print(pin);
-    Serial.print(F(" DHT22 type. T="));
-    Serial.print(temp);
-    Serial.print(F("°C H="));
-    Serial.print(humidity);
-    Serial.print(F("%"));
+    debugSerial << F("IN:") << pin << F(" DHT22 type. T=") << temp << F("°C H=") << humidity << F("%");
    if (emit && temp && humidity && temp == temp && humidity == humidity) {
-        char valstr[10];
        char addrstr[100] = "";
+#ifdef WITH_DOMOTICZ
+        aJsonObject *idx = aJson.getObjectItem(inputObj, "idx");
+        if (idx && idx->valuestring) {//DOMOTICZ json format support
+            debugSerial << endl << idx->valuestring << F(" Domoticz valstr:");
+            char valstr[50];
+            sprintf(valstr, "{\"idx\":%s,\"svalue\":\"%.1f;%.0f;0\"}", idx->valuestring, temp, humidity);
+            debugSerial << valstr;
+            mqttClient.publish(emit->valuestring, valstr);
+            setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT);
+            debugSerial << F(" NextPollMillis=") << nextPollTime() << endl;
+            return;
+        }
+#endif
+        char valstr[10];
        strcat(addrstr, emit->valuestring);
        strcat(addrstr, "T");
        printFloatValueToStr(temp, valstr);
@@ -233,12 +242,11 @@ void Input::dht22Poll() {
        addrstr[strlen(addrstr) - 1] = 'H';
        printFloatValueToStr(humidity, valstr);
        mqttClient.publish(addrstr, valstr);
+
        setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT);
-        Serial.print(" NextPollMillis=");
-        Serial.println(nextPollTime());
+        debugSerial << F(" NextPollMillis=") << nextPollTime() << endl;
    } else
        setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT / 3);
-#endif
 }

 unsigned long Input::nextPollTime() const {
@@ -253,6 +261,7 @@ unsigned long Input::nextPollTime() const {
    return 0;
 }

+
 void Input::setNextPollTime(unsigned long pollTime) {
    for (int i = 0; i < 5; i++) {
        if (nextPollMillisPin[i] == pin) {
@@ -266,6 +275,50 @@ void Input::setNextPollTime(unsigned long pollTime) {
    }
 }

+void Input::uptimePoll() {
+    if(nextPollTime()>millis())
+        return;
+    aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
+    if (emit) {
+        char valstr[11];
+//        printUlongValueToStr(valstr,millis());
+        printUlongValueToStr(valstr,millis());
+        mqttClient.publish(emit->valuestring, valstr);
+    }
+    setNextPollTime(millis() +UPTIME_POLL_DELAY_DEFAULT);
+}
+
+void Input::onCounterChanged(int i) {
+#if defined(__SAM3X8E__)
+    counter_value[counter_irq_map[i]]++;
+#endif
+
+#if defined(ARDUINO_ARCH_AVR)
+    counter_value[i]++;
+#endif
+}
+
+void Input::onCounterChanged0() {
+    onCounterChanged(0);
+}
+void Input::onCounterChanged1() {
+    onCounterChanged(1);
+}
+void Input::onCounterChanged2() {
+    onCounterChanged(2);
+}
+void Input::onCounterChanged3() {
+    onCounterChanged(3);
+}
+void Input::onCounterChanged4() {
+    onCounterChanged(4);
+}
+void Input::onCounterChanged5() {
+    onCounterChanged(5);
+}
+
+#endif
+


 void Input::contactPoll() {
@@ -273,7 +326,7 @@ void Input::contactPoll() {
 #if defined(ARDUINO_ARCH_STM32F1)
     WiringPinMode inputPinMode;
 #endif
-#if defined(__SAM3X8E__)||defined(__AVR__)||defined(ESP8266)||defined(ARDUINO_ARCH_ESP32)
+#if defined(__SAM3X8E__)||defined(ARDUINO_ARCH_AVR)||defined(ARDUINO_ARCH_ESP8266)||defined(ARDUINO_ARCH_ESP32)
     uint32_t inputPinMode;
 #endif

@@ -307,85 +360,54 @@ void Input::contactPoll() {
        store->bounce = SAME_STATE_ATTEMPTS;
 }

-void Input::uptimePoll() {
-    if(nextPollTime()>millis())
-        return;
+
+
+void Input::onContactChanged(int newValue) {
+    debugSerial << F("IN:") << (pin) << F("=") << newValue << endl;
+    aJsonObject *item = aJson.getObjectItem(inputObj, "item");
+    aJsonObject *scmd = aJson.getObjectItem(inputObj, "scmd");
+    aJsonObject *rcmd = aJson.getObjectItem(inputObj, "rcmd");
    aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
    if (emit) {
-        char valstr[11];
-//        printUlongValueToStr(valstr,millis());
-        printUlongValueToStr(valstr,millis());
-        mqttClient.publish(emit->valuestring, valstr);
+#ifdef WITH_DOMOTICZ
+        aJsonObject *idx = aJson.getObjectItem(inputObj, "idx");
+        if (idx->valuestring) {
+            debugSerial << endl << idx->valuestring << F(" Domoticz valstr:");
+            char valstr[80];
+            char *switchCmd;
+            (newValue)? sprintf(valstr, "{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"On\"}", idx->valuestring)
+            : sprintf(valstr,"{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"Off\"}",idx->valuestring);
+            debugSerial << valstr;
+            mqttClient.publish(emit->valuestring, valstr);
+        } else
+#endif
+        if (newValue) {  //send set command
+            if (!scmd) mqttClient.publish(emit->valuestring, "ON", true);
+            else if (strlen(scmd->valuestring))
+                mqttClient.publish(emit->valuestring, scmd->valuestring, true);
+        } else {  //send reset command
+            if (!rcmd) mqttClient.publish(emit->valuestring, "OFF", true);
+            else if (strlen(rcmd->valuestring))mqttClient.publish(emit->valuestring, rcmd->valuestring, true);
+        }
    }
-    setNextPollTime(millis() +UPTIME_POLL_DELAY_DEFAULT);
-}

-void Input::onContactChanged(int val)
-{
-  Serial.print(F("IN:"));  Serial.print(pin);Serial.print(F("="));Serial.println(val);
-  aJsonObject * item = aJson.getObjectItem(inputObj,"item");
-  aJsonObject * scmd = aJson.getObjectItem(inputObj,"scmd");
-  aJsonObject * rcmd = aJson.getObjectItem(inputObj,"rcmd");
-  aJsonObject * emit = aJson.getObjectItem(inputObj,"emit");
-
-  if (emit)
-  {
-
-  if (val)
-            {  //send set command
-               if (!scmd) mqttClient.publish(emit->valuestring,"ON",true); else  if (strlen(scmd->valuestring)) mqttClient.publish(emit->valuestring,scmd->valuestring,true);
+    if (item) {
+        Item it(item->valuestring);
+        if (it.isValid()) {
+            if (newValue) {  //send set command
+                if (!scmd) it.Ctrl(CMD_ON, 0, NULL, true);
+                else if (strlen(scmd->valuestring))
+                    it.Ctrl(scmd->valuestring, true);
+            } else {  //send reset command
+                if (!rcmd) it.Ctrl(CMD_OFF, 0, NULL, true);
+                else if (strlen(rcmd->valuestring))
+                    it.Ctrl(rcmd->valuestring, true);
            }
-       else
-            {  //send reset command
-              if (!rcmd) mqttClient.publish(emit->valuestring,"OFF",true);  else  if (strlen(rcmd->valuestring)) mqttClient.publish(emit->valuestring,rcmd->valuestring,true);
-            }
-  }
-
-  if (item)
-  {
-  Item it(item->valuestring);
-  if (it.isValid())
-      {
-       if (val)
-            {  //send set command
-               if (!scmd) it.Ctrl(CMD_ON,0,NULL,true); else if   (strlen(scmd->valuestring))  it.Ctrl(scmd->valuestring,true);
-            }
-       else
-            {  //send reset command
-               if (!rcmd) it.Ctrl(CMD_OFF,0,NULL,true); else if  (strlen(rcmd->valuestring))  it.Ctrl(rcmd->valuestring,true);
-            }
-      }
-  }
+        }
+    }
 }

-void Input::onCounterChanged(int i) {
-#if defined(__SAM3X8E__)
-    counter_value[counter_irq_map[i]]++;
-#endif

-#if defined(__AVR__)
-    counter_value[i]++;
-#endif
-}
-
-void Input::onCounterChanged0() {
-    onCounterChanged(0);
-}
-void Input::onCounterChanged1() {
-    onCounterChanged(1);
-}
-void Input::onCounterChanged2() {
-    onCounterChanged(2);
-}
-void Input::onCounterChanged3() {
-    onCounterChanged(3);
-}
-void Input::onCounterChanged4() {
-    onCounterChanged(4);
-}
-void Input::onCounterChanged5() {
-    onCounterChanged(5);
-}

 void Input::printUlongValueToStr(char *valstr, unsigned long value) {
    char buf[11];
--- a/lighthub/inputs.h
+++ b/lighthub/inputs.h
@@ -91,7 +91,7 @@ public:

    boolean isValid();

-    void onContactChanged(int val);
+    void onContactChanged(int newValue);

    int poll();

--- a/lighthub/item.cpp
+++ b/lighthub/item.cpp
@@ -891,7 +891,7 @@ int Item::VacomSetHeat(int addr, int8_t val, int8_t cmd) {
 int Item::modbusDimmerSet(int addr, uint16_t _reg, int _regType, int _mask, uint16_t value) {

    if (_regType != MODBUS_COIL_REG_TYPE || _regType != MODBUS_HOLDING_REG_TYPE) {
-      
+
    }

    if (modbusBusy) {
@@ -933,7 +933,7 @@ int Item::modbusDimmerSet(int addr, uint16_t _reg, int _regType, int _mask, uint
        default:
            Serial.println(F("Not supported reg type"));
    }
-    
+
    modbusBusy = 0;
 }

@@ -1051,7 +1051,7 @@ boolean Item::checkModbusRetry() {
    if (cmd & CMD_RETRY) {   // if last sending attempt of command was failed
      int val = getVal();
      Serial.println(F("Retrying CMD"));
-      
+
      cmd &= ~CMD_RETRY;     // Clean retry flag
      Ctrl(cmd,1,&val);      // Execute command again
      return true;
@@ -1062,13 +1062,13 @@ return false;
 int Item::checkModbusDimmer() {
    if (modbusBusy) return -1;
    if (checkModbusRetry()) return -2;
-    
+
    short numpar = 0;
    if ((itemArg->type != aJson_Array) || ((numpar = aJson.getArraySize(itemArg)) < 2)) {
        Serial.println(F("Illegal arguments"));
        return -3;
    }
-    
+
    modbusBusy = 1;

    uint8_t result;
--- a/lighthub/main.cpp
+++ b/lighthub/main.cpp
@@ -68,20 +68,13 @@ PWM Out
 #include "main.h"
 #include "options.h"
 #include "utils.h"
-#ifdef WITH_STREAMING_LIB
-#include "Streaming.h"
-#else
-#include "PrintEx.h"
-using namespace ios;
-#endif
-

 #if defined(__SAM3X8E__)
 DueFlashStorage EEPROM;
 EthernetClient ethClient;
 #endif

-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 EthernetClient ethClient;
 #endif

@@ -209,20 +202,20 @@ void mqttCallback(char *topic, byte *payload, unsigned int length) {

 void printIPAddress(IPAddress ipAddress) {
    for (byte i = 0; i < 4; i++)
-#ifdef WITH_STREAMING_LIB
-            (i < 3) ? debugSerial << _DEC(ipAddress[i]) << F(".") : debugSerial << _DEC(ipAddress[i]) << F(", ");
-#else
+#ifdef WITH_PRINTEX_LIB
            (i < 3) ? debugSerial << (ipAddress[i]) << F(".") : debugSerial << (ipAddress[i])<<F(", ");
+#else
+            (i < 3) ? debugSerial << _DEC(ipAddress[i]) << F(".") : debugSerial << _DEC(ipAddress[i]) << F(", ");
 #endif
 }

 void printMACAddress() {
    debugSerial<<F("Configured MAC:");
    for (byte i = 0; i < 6; i++)
-#ifdef WITH_STREAMING_LIB
-        (i < 5) ?debugSerial<<_HEX(mac[i])<<F(":"):debugSerial<<_HEX(mac[i])<<endl;
-#else
+#ifdef WITH_PRINTEX_LIB
        (i < 5) ?debugSerial<<hex <<(mac[i])<<F(":"):debugSerial<<hex<<(mac[i])<<endl;
+#else
+        (i < 5) ?debugSerial<<_HEX(mac[i])<<F(":"):debugSerial<<_HEX(mac[i])<<endl;
 #endif
 }

@@ -299,7 +292,7 @@ lan_status lanLoop() {


    {
-#if defined(__AVR__) || defined(__SAM3X8E__)
+#if defined(ARDUINO_ARCH_AVR) || defined(__SAM3X8E__)
        wdt_dis();
        if (lanStatus > 0)
            switch (Ethernet.maintain()) {
@@ -445,17 +438,14 @@ void onInitialStateInitLAN() {
    if(!wifiInitialized) {
        WiFi.mode(WIFI_STA);
        WiFi.disconnect();
-        debugSerial<<F("WIFI AP/Password:"));
-        debugSerial<<QUOTE(ESP_WIFI_AP));
-        debugSerial<<F("/"));
-        debugSerial<<QUOTE(ESP_WIFI_PWD));
+        debugSerial<<F("WIFI AP/Password:")<<QUOTE(ESP_WIFI_AP)<<F("/")<<QUOTE(ESP_WIFI_PWD);
        WiFi.begin(QUOTE(ESP_WIFI_AP), QUOTE(ESP_WIFI_PWD));

        int wifi_connection_wait = 10000;
        while (WiFi.status() != WL_CONNECTED && wifi_connection_wait > 0) {
            delay(500);
            wifi_connection_wait -= 500;
-            debugSerial<<".");
+            debugSerial<<".";
        }
        wifiInitialized = true;
    }
@@ -463,18 +453,16 @@ void onInitialStateInitLAN() {

 #if defined(ARDUINO_ARCH_ESP32) || defined(ARDUINO_ARCH_ESP8266)
    if (WiFi.status() == WL_CONNECTED) {
-        debugSerial<<F("WiFi connected. IP address: ");
-        debugSerial<<WiFi.localIP();
+        debugSerial<<F("WiFi connected. IP address: ")<<WiFi.localIP();
        lanStatus = HAVE_IP_ADDRESS;//1;
    } else
    {
-
        debugSerial<<F("Problem with WiFi!");
        nextLanCheckTime = millis() + DHCP_RETRY_INTERVAL/5;
    }
 #endif

-#if defined(__AVR__) || defined(__SAM3X8E__)||defined(ARDUINO_ARCH_STM32F1)
+#if defined(ARDUINO_ARCH_AVR) || defined(__SAM3X8E__)||defined(ARDUINO_ARCH_STM32F1)
 #ifdef W5500_CS_PIN
    Ethernet.w5500_cspin = W5500_CS_PIN;
    debugSerial<<F("Use W5500 pin: ");
@@ -505,7 +493,7 @@ void onInitialStateInitLAN() {
    else {
        debugSerial<<"\nNo IP data found in flash\n";
        wdt_dis();
-#if defined(__AVR__) || defined(__SAM3X8E__)
+#if defined(ARDUINO_ARCH_AVR) || defined(__SAM3X8E__)
        res = Ethernet.begin(mac, 12000);
 #endif
 #if defined(ARDUINO_ARCH_STM32F1)
@@ -537,7 +525,7 @@ void softRebootFunc() {
 }
 #endif

-#if defined(__AVR__) || defined(__SAM3X8E__)
+#if defined(ARDUINO_ARCH_AVR) || defined(__SAM3X8E__)
 void (*softRebootFunc)(void) = 0;

 void printCurentLanConfig();
@@ -926,7 +914,7 @@ lan_status loadConfigFromHttp(int arg_cnt, char **args)
 #endif
    debugSerial<<F("Config URI: http://")<<configServer<<URI<<eol;

-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
    FILE *configStream;
    //byte hserver[] = { 192,168,88,2 };
    wdt_dis();
@@ -1171,10 +1159,10 @@ void printFirmwareVersionAndBuildOptions() {
 #else
    debugSerial<<F("\n(+)OWIRE");
 #endif
-#ifndef DHT_DISABLE
-    debugSerial<<F("\n(+)DHT");
+#ifndef DHT_COUNTER_DISABLE
+    debugSerial<<F("\n(+)DHT COUNTER");
 #else
-    debugSerial<<F("\n(-)DHT");
+    debugSerial<<F("\n(-)DHT COUNTER");
 #endif

 #ifdef SD_CARD_INSERTED
--- a/lighthub/main.h
+++ b/lighthub/main.h
@@ -34,7 +34,7 @@
 //#define wdt_en()
 //#define wdt_dis()
 //#endif
-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 #if defined(WATCH_DOG_TICKER_DISABLE)
 #define wdt_en() wdt_disable()
 #define wdt_dis() wdt_disable()
@@ -75,7 +75,7 @@
 #include <ArduinoHttpClient.h>
 #endif

-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 #include "HTTPClient.h"
 #include <avr/pgmspace.h>
 #include <avr/wdt.h>
@@ -104,7 +104,7 @@

 #endif

-#if defined(__AVR__) || defined(__SAM3X8E__) || defined(ESP8266)
+#if defined(ARDUINO_ARCH_AVR) || defined(__SAM3X8E__) || defined(ESP8266)
 #ifdef Wiz5500
 #include <Ethernet2.h>
 #else
--- a/lighthub/options.h
+++ b/lighthub/options.h
@@ -101,7 +101,7 @@
 #define LAN_INIT_DELAY 500
 #endif

-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 //All options available
 #ifdef CONTROLLINO
 #define modbusSerial Serial3
@@ -121,7 +121,6 @@
 #if defined(ARDUINO_ARCH_ESP8266)
 #undef _dmxin
 #undef _modbus
-#define WITH_STREAMING_LIB

 #ifndef DMX_DISABLE
 #define _espdmx
@@ -129,6 +128,9 @@
 #define modbusSerial Serial1
 #endif

+#if defined(ARDUINO_ARCH_ESP32)
+#endif
+
 #ifndef _dmxout
 #undef _artnet
 #endif
--- a/lighthub/utils.cpp
+++ b/lighthub/utils.cpp
@@ -86,7 +86,7 @@ unsigned long freeRam ()
 {return system_get_free_heap_size();}
 #endif

-#if defined(__AVR__)
+#if defined(ARDUINO_ARCH_AVR)
 unsigned long freeRam ()
 {
  extern int __heap_start, *__brkval;
@@ -141,7 +141,7 @@ void printFloatValueToStr(float value, char *valstr) {
    #if defined(ESP8266) || defined(ARDUINO_ARCH_ESP32)
    sprintf(valstr, "%2.1f", value);
    #endif
-    #if defined(__AVR__)
+    #if defined(ARDUINO_ARCH_AVR)
    sprintf(valstr, "%d", (int)value);
    int fractional = 10.0*((float)abs(value)-(float)abs((int)value));
    int val_len =strlen(valstr);
--- a/lighthub/utils.h
+++ b/lighthub/utils.h
@@ -24,6 +24,13 @@ e-mail    anklimov@gmail.com
 #define VAR_NAME_VALUE(var) #var "="  VALUE(var)

 #include <Arduino.h>
+#include "options.h"
+#ifdef WITH_PRINTEX_LIB
+#include "PrintEx.h"
+using namespace ios;
+#else
+#include "Streaming.h"
+#endif

 void PrintBytes(uint8_t* addr, uint8_t count, bool newline);
 void SetBytes(uint8_t* addr, uint8_t count, char * out);
--- a/mosquitto_examples.sh
+++ b/mosquitto_examples.sh
@@ -0,0 +1,2 @@
+#!/usr/bin/env bash
+mosquitto_pub -t 'domoticz/in' -h broker_url -p port -u user -P pass -m '{"command": "udevice", "idx": 20, "svalue": "15"}'
--- a/platformio.ini
+++ b/platformio.ini
@@ -9,8 +9,8 @@
 ; http://docs.platformio.org/page/projectconf.html
 [platformio]
 src_dir = lighthub
-env_default =
-    megaatmega2560
+;env_default =
+;    megaatmega2560
 ;    megaatmega2560-net
 ;    due
 ;    esp8266
@@ -20,19 +20,27 @@ env_default =
 ;    controllino
 ;    stm32

-;build_dir = !sh pioenvs.sh ${platformio.env_default}
-;libdeps_dir = !sh piolibdeps.sh ${platformio.env_default}
+;build_dir = /tmp/pioenvs
+;libdeps_dir = /tmp/piolibdeps

 [env:esp32]
 platform = espressif32
 framework = arduino
 board = pico32
-lib_ldf_mode = chain+
-build_flags = !sh build_flags_esp32.sh
+build_flags = !bash check_custom_build_flags_esp32.sh
+lib_ignore =
+    DmxSimple
+    DMXSerial
+    DmxDue
+    DueFlashStorage
+    SD
+    SdFat
+    httpClient
+    WifiManager
+    Ethernet
 lib_deps =
    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
    https://github.com/anklimov/DS2482_OneWire
-    ESP8266HTTPClient
    Ethernet3
    https://github.com/anklimov/aJson
    https://github.com/anklimov/CmdArduino
@@ -44,40 +52,20 @@ lib_deps =
    DHT sensor library for ESPx
    DHT sensor library
    Streaming
-    https://github.com/Chris--A/PrintEx.git
-
-[env:stm32]
-platform = ststm32
-framework = arduino
-board = nucleo_f103rb
-upload_protocol = stlink
-debug_tool = stlink
-extra_scripts = pre:!pre_stm32.sh
-;lib_ldf_mode = chain+
-build_flags = !sh build_flags_stm32.sh
-lib_deps =
-    DallasTemperature
-    https://github.com/anklimov/aJson
-    https://github.com/anklimov/CmdArduino
-    ArduinoHttpClient
-    https://github.com/anklimov/ModbusMaster
-;    https://github.com/Serasidis/Ethernet_STM.git
-;    https://github.com/livello/Ethernet_STM.git
-    https://github.com/knolleary/pubsubclient.git
-    Adafruit Unified Sensor
-    DHT sensor library
-;    https://github.com/anklimov/DMXSerial
-;    Syslog
-;    https://github.com/No3x/Syslog.git
-    https://github.com/arcao/Syslog.git
-;    UIPEthernet
+    https://github.com/livello/PrintEx#is-select-redecl

 [env:due]
 platform = atmelsam
 framework = arduino
 board = due
-lib_ldf_mode = chain+
-build_flags = !sh build_flags_due.sh
+build_flags = !bash check_custom_build_flags_due.sh
+lib_ignore =
+    DHT sensor library for ESPx
+    DMXSerial
+    DmxSimple
+    httpClient
+    ESPDMX
+    WifiManager
 lib_deps =
    https://github.com/sebnil/DueFlashStorage
    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
@@ -96,6 +84,7 @@ lib_deps =
    Adafruit Unified Sensor
    DHT sensor library
    https://github.com/arcao/Syslog.git
+    Streaming


 [env:megaatmega2560]
@@ -103,9 +92,15 @@ platform = atmelavr
 board = megaatmega2560
 ;upload_port = net:192.168.88.31:23
 framework = arduino
-;lib_ldf_mode = chain+
-build_flags = !sh build_flags_mega2560.sh
+build_flags = !bash check_custom_build_flags_mega2560.sh
+lib_ignore =
+    DHT sensor library for ESPx
+    DmxDue
+    DueFlashStorage
+    WifiManager
 lib_deps =
+    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+    https://github.com/anklimov/DS2482_OneWire
    https://github.com/anklimov/DmxSimple
    https://github.com/anklimov/httpClient
    https://github.com/anklimov/aJson
@@ -113,7 +108,6 @@ lib_deps =
    https://github.com/anklimov/ModbusMaster
    https://github.com/anklimov/DMXSerial
    https://github.com/anklimov/Ethernet
-    https://github.com/PaulStoffregen/SPI.git
    https://github.com/knolleary/pubsubclient.git
    https://github.com/anklimov/Artnet.git
    FastLED
@@ -122,14 +116,20 @@ lib_deps =
    DHT sensor library
    https://github.com/arcao/Syslog.git
    Streaming
-    https://github.com/Chris--A/PrintEx.git

 [env:esp8266]
 platform = espressif8266
 framework = arduino
 board = nodemcuv2
-lib_ldf_mode = chain+
-build_flags = !sh build_flags_esp8266.sh
+build_flags = !bash check_custom_build_flags_esp8266.sh
+lib_ignore =
+    DmxSimple
+    DMXSerial
+    DmxDue
+    DueFlashStorage
+    SD
+    SdFat
+    httpClient
 lib_deps =
    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
    https://github.com/anklimov/DS2482_OneWire
@@ -146,7 +146,6 @@ lib_deps =
    DHT sensor library
    WifiManager
    https://github.com/arcao/Syslog.git
-    https://github.com/livello/PrintEx.git#is-select-redecl
    Streaming

 [env:megaatmega2560-net]
@@ -154,8 +153,13 @@ platform = atmelavr
 board = megaatmega2560
 framework = arduino
 upload_port = net:192.168.88.2:23000
-build_flags = !sh build_flags_mega2560-net.sh
-;lib_ldf_mode = chain+
+build_flags = !bash check_custom_build_flags_mega2560-net.sh
+lib_ignore =
+    DHT sensor library for ESPx
+    DmxDue
+    DueFlashStorage
+    ESP-Dmx
+    WifiManager
 lib_deps =
    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
    https://github.com/anklimov/DS2482_OneWire
@@ -166,7 +170,6 @@ lib_deps =
    https://github.com/anklimov/ModbusMaster
    https://github.com/anklimov/DMXSerial
    https://github.com/anklimov/Ethernet
-    https://github.com/PaulStoffregen/SPI.git
    https://github.com/knolleary/pubsubclient.git
    https://github.com/anklimov/Artnet.git
    FastLED
@@ -180,9 +183,18 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
-;lib_ldf_mode = chain+
-build_flags = -D Wiz5500 -D ARTNET_ENABLE
-build_flags = !sh build_flags_due-5500.sh
+build_flags = !bash check_custom_build_flags_due-5500.sh
+lib_ignore =
+    DHT sensor library for ESPx
+    https://github.com/anklimov/Ethernet
+    ESP-Dmx
+    DMXSerial
+    ESPDMX
+    WifiManager
+    DmxSimple
+    httpClient
+    Ethernet
+
 lib_deps =
    https://github.com/sebnil/DueFlashStorage
    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
@@ -202,16 +214,19 @@ lib_deps =
    DHT sensor library
    https://github.com/arcao/Syslog.git
    Streaming
-;    PrintEx
-    https://github.com/livello/PrintEx.git#is-select-redecl
+    https://github.com/livello/PrintEx#is-select-redecl

 [env:controllino]
 platform = atmelavr
 board = megaatmega2560
 framework = arduino
-;lib_ldf_mode = chain+
-build_flags = !echo -n "-DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-build_flags = -D CONTROLLINO -D CUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:07
+build_flags = !bash check_custom_build_flags_controllino.sh
+lib_ignore =
+    DHT sensor library for ESPx
+    DmxDue
+    DueFlashStorage
+    ESP-Dmx
+    WifiManager
 lib_deps =
    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
    https://github.com/anklimov/DS2482_OneWire
@@ -222,10 +237,45 @@ lib_deps =
    https://github.com/anklimov/ModbusMaster
    https://github.com/anklimov/DMXSerial
    https://github.com/anklimov/Ethernet
-    https://github.com/PaulStoffregen/SPI.git
    https://github.com/knolleary/pubsubclient.git
    https://github.com/anklimov/Artnet.git
    FastLED
    EEPROM
    Adafruit Unified Sensor
    DHT sensor library
+    Streaming
+    https://github.com/livello/PrintEx#is-select-redecl
+
+;TODO:STM32 compilation problems
+;[env:stm32]
+;platform = ststm32
+;framework = arduino
+;board = nucleo_f103rb
+;upload_protocol = stlink
+;debug_tool = stlink
+;build_flags = !bash check_custom_build_flags_stm32.sh
+;lib_ignore =
+;    DHT sensor library for ESPx
+;    DmxDue
+;    DueFlashStorage
+;    ESP-Dmx
+;    WifiManager
+;    FastLED
+;    Ethernet
+;lib_deps =
+;    DallasTemperature
+;    https://github.com/anklimov/aJson
+;    https://github.com/anklimov/CmdArduino
+;    ArduinoHttpClient
+;    https://github.com/anklimov/ModbusMaster
+;;    https://github.com/Serasidis/Ethernet_STM.git
+;;    https://github.com/livello/Ethernet_STM.git
+;    https://github.com/knolleary/pubsubclient.git
+;    Adafruit Unified Sensor
+;    DHT sensor library
+;;    https://github.com/anklimov/DMXSerial
+;;    Syslog
+;;    https://github.com/No3x/Syslog.git
+;    https://github.com/arcao/Syslog.git
+;;    UIPEthernet
+;    Streaming
--- a/pre_stm32.sh
+++ b/pre_stm32.sh
@@ -1,4 +0,0 @@
-#! /bin/bash
-rm /tmp/piolibdeps -Rf
-mkdir /tmp/piolibdeps_stm32
-ln -s /tmp/piolibdeps_stm32 /tmp/piolibdeps