andry/lighthub
1
0
Fork 0
mirror of https://github.com/anklimov/lighthub synced 2025-12-07 20:29:50 +03:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'develop' of https://github.com/anklimov/lighthub into develop

Browse Source
This commit is contained in:
Andrey Klimov
2019-03-04 04:50:39 +03:00
parent 141bb9c657 8d779c4581
commit ed0330307e
1 changed files with 17 additions and 94 deletions
Download Patch File Download Diff File Expand all files Collapse all files

111
README.md
View File

@@ -7,11 +7,14 @@ It may operate both:
Lighthub allows connecting together:
* Contact sensors (switches, buttons etc)
* Analog sensors (Leak detectors, Knobs etc)
* 1-Wire temperature sensors (up to 20 on single bus)
* Standard nonexpensive Relay board with TTL inputs, [like this](https://aliexpress.com/item/16-Channel-20A-Relay-Control-Module-for-Arduino-UNO-MEGA2560-R3-Raspberry-Pi/32747887693.html) to control AC powered lamps, floor heaters, boilers etc
* [Standard nonexpensive LED dimmers](https://aliexpress.com/item/30-channel-27channel-Easy-DMX-LED-controller-dmx-decoder-driver-rgb-led-controller/2015743918.html) and [AC DMX-512 dimmers](https://aliexpress.com/item/DMX302-led-DMX-triac-dimmer-brightness-controller-AC90V-240V-Output-3channels-1A-CH-High-voltage-led/32822841266.html)
* Standard nonexpensive Relay board with TTL inputs, [like this](http://ali.pub/2zlosh) to control AC powered lamps, floor heaters, boilers etc
* [Standard nonexpensive LED dimmers](http://ali.pub/2zlokp) and [AC DMX-512 dimmers](http://ali.pub/2zlont)
* Modbus RTU devices (Currently, are deployed two types of Modbus devices: AC Dimmer and Ventilation set (Based on [Vacon 10 controller](http://files.danfoss.com/download/Drives/Vacon-10-Quick-Guide-DPD00714F1-UK.pdf))
* Simple DMX wall sensor panel [like this](https://aliexpress.com/item/New-Ltech-D8-LED-rgb-RGBW-touch-panel-controller-DMX512-controller-DC12-24V-4-zones-4/32800199589.html)
* Simple DMX wall sensor panel [like this](http://ali.pub/2zlohe)
[List of non-expensive compatible components from AliExpress here](http://ppv.alipromo.com/custom/promo.php?hash=pjagwaovaero6vkeabjpkpvy4gznbgkc&landing_id=39661)
![alt text](docs/LightHubAppDiagram.png "LightHub application diagram")
@@ -30,106 +33,27 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
* [Channel commands](https://github.com/anklimov/lighthub/wiki/Channel-commands)
* [OpenHab integration](https://github.com/anklimov/lighthub/wiki/OpenHab--integration)
Finished portation of project to Arduino DUE and ESP8266 (ESP32 not tested).
Compiled image has been added to [compiled/](https://github.com/anklimov/lighthub/tree/master/compiled) folder. Flash your Mega 2560
```bash
avrdude -v -V -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i
```
or flash your DUE (need to correct path and port, of course)
```bash
/Users/<user>/Library/Arduino15/packages/arduino/tools/bossac/1.6.1-arduino/bossac -i -d --port=cu.usbmodem1451 -U false -e -w -v -b firmware.bin -R
```
Note: binary images usually not up-to-date with recent code. The preferred way, to compile and upload firmware to your controller.
# Dependencies
(quite big number of libs required. Use git clone to have your local copy in your Arduino libs folder)
Please check updates for all dependences.
For patched libraries, appropriate GitHub repo URL provided:
* Arduino-Temperature-Control-Library https://github.com/anklimov/Arduino-Temperature-Control-Library
* DS2482_OneWire https://github.com/anklimov/DS2482_OneWire
* FastLED
* Wire (standard)
* Artnet https://github.com/anklimov/Artnet.git
* DmxSimple https://github.com/anklimov/DmxSimple (for AVR) or https://github.com/anklimov/ESP-Dmx (for ESP) or https://github.com/anklimov/DmxDue (for DUE)
* HTTPClient (for AVR) https://github.com/anklimov/HTTPClient or https://github.com/arduino-libraries/ArduinoHttpClient for other platforms
* aJson https://github.com/anklimov/aJson
* CmdArduino https://github.com/anklimov/CmdArduino
* EEPROM (standard for AVR) or DueFlashStorage for DUE: https://github.com/sebnil/DueFlashStorage
* ModbusMaster https://github.com/anklimov/ModbusMaster
* pubsubclient-2.6
* DMXSerial-master (for AVR) https://github.com/anklimov/DMXSerial
* Ethernet https://github.com/anklimov/Ethernet
* SPI (standard)
Portation from AVR Mega 2560 to SAM3X8E (Arduino DUE) done since v 0.96 and tested against Wiznet 5100 Ethernet shield and Wiznet 5500 Ethernet module
# Platforms specific details:
AVR version is basic, long time in production and have all functions
*DMX-out is software (DMXSimple) on pin3
**AVR** version (Arduino Mega) is basic, long time in production and have all functions
* DMX-out is software (DMXSimple) on pin3, can be re-defined to PIN 18 (USART1 TX)
* DMX-in - hardware
* WIZNET 5100 and 5500 Ethernets are supported
* Modbus on USART2
**SAM3X8E**: (Tested. In production. Recomended hardware at current moment)
**SAM3X8E** (Arduino DUE): (Tested. In production. Recomended hardware at current moment)
* default PWM out frequency
* both, DMX-in and DMX-out are hardware USART based. Use USART1 (pins 18 and 19) for DMX-out and DMX-in
* WIZNET 5100 and 5500 Ethernets are supported
* Modbus on USART2
**ESP8266**: (Developed but not tested in production)
**ESP8266**: (Developed, working, but not tested in production)
* DMX-OUT on USART1 TX
* DMX-IN - not possible to deploy in ESP8266
* DMX-IN - disabled - not possible to deploy in ESP8266
* Modbus - disabled. Might be configured in future on USART0 instead CLI/DEBUG
since v. 0.97:
Mega and DUE:
Need to use compiler directive -D Wiz5500 and https://github.com/anklimov/Ethernet2 library to compile with Wiznet 5500 instead 5100
Prefered way to compile project is using platformio toolchain, suitable for Arduino Due, and Arduino Mega2560
# Due compilation issue "USART0_Handler redefinition"
Please, open /variants/arduino_due_x/variant.cpp file, then add USART0_Handler method definition like this
```
void USART0_Handler(void) __attribute__((weak));
```
The normal path to find this file in platformio is:
.platformio/packages/framework-arduinosam/variants/arduino_due_x
# Platformio command line build instructions
[First of all install platformio framework.]( http://docs.platformio.org/en/latest/installation.html) [Good tutorial for fast start in RUSSIAN.](https://geektimes.ru/post/273852/)
In linux\OSX you can open terminal, navigate to your programming directory, then
```bash
git clone https://github.com/anklimov/lighthub.git
cd lighthub
```
now prepare project files for your IDE
```bash
pio init --ide [atom|clion|codeblocks|eclipse|emacs|netbeans|qtcreator|sublimetext|vim|visualstudio|vscode]
```
Set custom build flags. first make your own copy of template
```bash
cp build_flags_template.sh my_build_flags.sh
```
then edit, change or comment unnecessary sections and source it
```bash
source my_build_flags.sh
```
build and upload firmware for due|megaatmega2560|esp8266 board
```bash
pio run -e due|megaatmega2560|esp8266 -t upload
```
Clean pio libraries folder. Try it if you have compilation problem:
```bash
rm -Rf .piolibdeps
```
open COM-port monitor with specified baud rate
```bash
platformio device monitor -b 115200
```
**ESP32**, **NRF52840** : Still early development stage
# Custom build flags
@@ -183,4 +107,3 @@ platformio device monitor -b 115200
* SYSLOG_ENABLE disabled
* WITH_PRINTEX_LIB diabled, using Streaming library
If you've using Arduino IDE to compile & flash firmware, it will use Default options above and you will not able to configure additional compilers options except edit "options.h" file