mirror of
https://github.com/anklimov/lighthub
synced 2025-12-06 11:49:51 +03:00
23 lines
1.1 KiB
Markdown
23 lines
1.1 KiB
Markdown
# LightHub
|
|
is Flexible, Arduino-Mega based SmartHome controller
|
|
|
|
It allow to connect together:
|
|
|
|
* Contact sensors (switches, buttons etc)
|
|
* 1-Wire temperature sensors (up to 20 on single bus)
|
|
* Standard nonexpensive Relay board with TTL inputs, (like this) to control AC powered lamps, floor heaters, boilers etc
|
|
* Standard LED and AC DMX-512 dimmer boards
|
|
* Modbus RTU devices (Currently, are deployed two types of Modbus devices: AC Dimmer and Ventilation set (Based on Vacon 10 controller)
|
|
* Simple DMX wall sensor panel
|
|
|
|
Where is possible both, to configure local control/mapping between inputs and outputs (light, floor heating thermostats) and remote control from Openhab or Openhab2 Smarthome software
|
|
|
|
Scalability is virtually unlimited: Setup so many controllers you needed in most convenient places of your house - MQTT broker will allow controllers communicate each other and with Openhab and propagate commands across network
|
|
|
|
Prease refer our Wiki for insructions.
|
|
|
|
Compiled image has been added to compiled/ folder
|
|
use
|
|
avrdude -v -V -patmega2560 -cwiring -b115200 -D -Uflash:w:lighthub.ino.hex:i
|
|
to flash your Mega 2560
|