Merge pull request #3226 from proddy/dev

don't use Eth if not on ESP32

CHANGELOG_LATEST.md

@@ -12,13 +12,20 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 - Commands Service that can be called via MQTT or API or used in the Scheduler Service
 - option to disable factory reset [#3150](https://github.com/emsesp/EMS-ESP32/issues/3150)
 - TLS support with 4MB boards without PSRAM
+- added eth_10mbit to Network Settings, which forces 10BASE-T half-duplex & autonegotiation off, halving the PHY’s power draw. It’s off by default as it will cause issues on managed switches with a port forced to 100Mb [#3213](https://github.com/emsesp/EMS-ESP32/pull/3213)
+- cleaner MD5 and firmware uploading in WebUI [#3222](https://github.com/emsesp/EMS-ESP32/issues/3222)
 
 ## Fixed
 
 - shunting yard show json
+- `system/sendmail` called from a Command or the Scheduler computed its value twice, which stripped the quotes from literal text and then failed on characters like `!`. Also shunting yard treated a `?` inside a quoted string as a ternary, so text like `"too hot?"` returned nothing
+- memory leak when using different timezones for ems-esp and thermostat[#3184](https://github.com/emsesp/EMS-ESP32/issues/3184)
 - LED stayed off on a healthy system when "Disable LED" was unchecked
 - Ethernet MAC address changed with the new SDK, breaking DHCP reservations (currently disabled)
 - "IPv4 nameserver" showed an IPv6 address when IPv6 was in use
+- HA Discovery warning on Uptime after EMS-ESP boot due to NTP not ready
+- hc/control setting for UI800 thermostats [#3181](https://github.com/emsesp/EMS-ESP32/discussions/3181)
+- solar module switches [#3223](https://github.com/emsesp/EMS-ESP32/issues/3223)
 
 ## Changed
 
@@ -29,4 +36,8 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 - Gateway and Connect devices are shown in the Devices page, but disabled [3126](https://github.com/emsesp/EMS-ESP32/discussions/3126)
 - show control setting only for master thermostats (0x10) [#3173](https://github.com/emsesp/EMS-ESP32/issues/3173)
 - remove devices without entities not listed in 0x07 telegram
+- changes to the Dialogs in Dashboard page, removed the run icon in the Commands page. Renamed Execute to Run.
+- set `None` for undefined values in HA `val_tpl`
+- changes in WebUI - remove multiple calls systemInfo endpoint, Vewrsion pages checks for internet connection [#3195](https://github.com/emsesp/EMS-ESP32/pull/3195)
+- multiple optimization in network, power down WiFi when Ethernet and WiFi nosleep is instant when selected [#3213](https://github.com/emsesp/EMS-ESP32/pull/3213)
 

Makefile

@@ -113,7 +113,7 @@ CPPFLAGS  += $(DEFINES) $(DEFAULTS) $(INCLUDE)
 CPPFLAGS  += -ggdb -g3 -MMD
 CPPFLAGS  += -flto=auto
 CPPFLAGS  += -Wall -Wextra -Werror
-CPPFLAGS  += -Wno-unused-parameter -Wno-missing-braces -Wno-vla-cxx-extension -Wno-switch-enum -Wno-unused-lambda-capture
+CPPFLAGS  += -Wno-unused-parameter -Wno-missing-braces -Wno-vla-cxx-extension -Wno-switch-enum
 CPPFLAGS  += -ffunction-sections -fdata-sections -fno-exceptions -fno-rtti -fno-threadsafe-statics
 CPPFLAGS  += -Os -DNDEBUG
 

data/pre_load.json

@@ -16,7 +16,8 @@
         "enableMDNS": true,
         "enableCORS": false,
         "CORSOrigin": "*",
-        "tx_power": 0
+        "tx_power": 0,
+        "eth_10mbit": false
       },
       "AP": {
         "provision_mode": 2,

interface/package.json

@@ -23,40 +23,40 @@
     "standalone-devcontainer": "concurrently -c \"auto\" \"typesafe-i18n\" \"pnpm:mock-rest\" \"vite --host\""
   },
   "dependencies": {
-    "@alova/adapter-xhr": "2.3.1",
+    "@alova/adapter-xhr": "2.3.3",
     "@emotion/react": "^11.14.0",
     "@emotion/styled": "^11.14.1",
-    "@mui/icons-material": "^9.3.0",
-    "@mui/material": "^9.3.0",
+    "@mui/icons-material": "^9.4.0",
+    "@mui/material": "^9.4.0",
     "@table-library/react-table-library": "4.1.15",
-    "alova": "^3.5.3",
+    "alova": "^3.5.5",
     "jwt-decode": "^4.0.0",
     "preact": "^10.29.8",
     "react": "^19.2.8",
     "react-dom": "^19.2.8",
     "react-icons": "^5.7.0",
-    "react-router": "^8.3.0",
+    "react-router": "^8.3.1",
     "typesafe-i18n": "^5.27.1"
   },
   "devDependencies": {
     "@eslint/js": "^10.0.1",
     "@preact/preset-vite": "^2.10.6",
     "@trivago/prettier-plugin-sort-imports": "^6.0.2",
-    "@types/node": "^26.1.2",
+    "@types/node": "^26.5.0",
     "@types/react": "^19.2.18",
-    "@types/react-dom": "^19.2.4",
-    "concurrently": "^10.0.4",
-    "eslint": "^10.8.0",
+    "@types/react-dom": "^19.2.7",
+    "concurrently": "^10.0.5",
+    "eslint": "^10.10.0",
     "eslint-config-prettier": "^10.1.8",
     "etag": "^1.8.1",
     "mime-types": "^3.0.2",
     "prettier": "^3.9.6",
-    "rollup-plugin-visualizer": "^7.0.1",
-    "terser": "^5.49.1",
+    "rollup-plugin-visualizer": "^7.1.1",
+    "terser": "^5.51.2",
     "typescript": "^6.0.3",
-    "typescript-eslint": "^8.66.0",
-    "vite": "^8.2.0",
+    "typescript-eslint": "^8.70.0",
+    "vite": "^8.2.2",
     "vite-plugin-imagemin": "^0.6.1"
   },
-  "packageManager": "pnpm@11.20.0+sha512.9a6f330a95b66446ea088faf1521405a8a01f07fde7124cc9958dfed52d4bb436737e65b08f85f37b46fcba375092558ac51262b816844b22f63406ed166bfee"
+  "packageManager": "pnpm@12.3.4+sha512.961aa41fb077da3a04a441d9f8e15ebc0c96da8ef710b2eb67bf9ee7cb0610eabd48f1fd85f51cffe73846785fa0f87c56a3a872a1d893f8446741b5cce45457"
 }

interface/src/SignIn.tsx

@@ -1,4 +1,4 @@
-import { memo, useCallback, useContext, useEffect, useMemo, useState } from 'react';
+import { memo, useContext, useEffect, useState } from 'react';
 
 import ForwardIcon from '@mui/icons-material/Forward';
 import { Box, Button, Paper, Typography } from '@mui/material';
@@ -43,17 +43,13 @@ const SignIn = memo(() => {
     }
   });
 
-  const updateLoginRequestValue = useMemo(
-    () =>
-      updateValue((updater) =>
-        setSignInRequest(
-          updater as unknown as (prevState: SignInRequest) => SignInRequest
-        )
-      ),
-    []
+  const updateLoginRequestValue = updateValue((updater) =>
+    setSignInRequest(
+      updater as unknown as (prevState: SignInRequest) => SignInRequest
+    )
   );
 
-  const signIn = useCallback(async () => {
+  const signIn = async () => {
     await callSignIn(signInRequest).catch((event: Error) => {
       if (event.message === 'Unauthorized') {
         toast.warning(LL.INVALID_LOGIN());
@@ -62,7 +58,7 @@ const SignIn = memo(() => {
       }
       setProcessing(false);
     });
-  }, [callSignIn, signInRequest, LL]);
+  };
 
   const validateAndSignIn = async () => {
     setProcessing(true);
@@ -78,7 +74,7 @@ const SignIn = memo(() => {
     }
   };
 
-  const submitOnEnter = useMemo(() => onEnterCallback(signIn), [signIn]);
+  const submitOnEnter = onEnterCallback(signIn);
 
   // get rid of scrollbar
   useEffect(() => {

interface/src/api/system.ts

@@ -2,7 +2,7 @@ import type { LogSettings, SystemStatus } from 'types';
 
 import { alovaInstance } from './endpoints';
 
-// systemStatus - also used to ping in System Monitor for pinging
+// systemStatus - also used in System Monitor to ping the ESP
 export const readSystemStatus = () =>
   alovaInstance.Get<SystemStatus>('/rest/systemStatus');
 
@@ -19,6 +19,7 @@ export const uploadFile = (file: File) => {
   const formData = new FormData();
   formData.append('file', file);
   return alovaInstance.Post('/rest/uploadFile', formData, {
-    timeout: UPLOAD_TIMEOUT
+    timeout: UPLOAD_TIMEOUT,
+    enableUpload: true
   });
 };

interface/src/app/main/Commands.tsx

@@ -3,11 +3,9 @@ import { useBlocker } from 'react-router';
 
 import AddIcon from '@mui/icons-material/Add';
 import CancelIcon from '@mui/icons-material/Cancel';
-import PlayArrowIcon from '@mui/icons-material/PlayArrow';
 import WarningIcon from '@mui/icons-material/Warning';
-import { Box, Button, IconButton, Typography } from '@mui/material';
+import { Box, Button, Typography } from '@mui/material';
 
-import { callAction } from '@/api/app';
 import {
   Body,
   Cell,
@@ -48,7 +46,7 @@ const DEFAULT_COMMAND_ITEM: Omit<CommandItem, 'id'> = {
 
 const commandsTheme = {
   Table: `
-    --data-table-library_grid-template-columns: repeat(1, minmax(100px, 1fr)) repeat(1, minmax(100px, 1fr)) 160px 32px;
+    --data-table-library_grid-template-columns: repeat(1, minmax(100px, 1fr)) repeat(1, minmax(100px, 1fr)) 160px;
   `,
   BaseRow: `
     font-size: 14px;
@@ -143,21 +141,6 @@ const Commands = () => {
     }
   };
 
-  const { send: executeCommand } = useRequest(
-    (id: string) => callAction({ action: 'executeCommand', param: id }),
-    { immediate: false }
-  )
-    .onSuccess(() => {
-      toast.success(LL.EXECUTE_COMMAND_SENT());
-    })
-    .onError((error) => {
-      toast.error(String(error.error?.message || 'An error occurred'));
-    });
-
-  const execute = async (name: string) => {
-    await executeCommand(name);
-  };
-
   const editItem = (ci: CommandItem) => {
     setCreating(false);
     setSelectedItem(ci);
@@ -222,7 +205,6 @@ const Commands = () => {
                 <HeaderCell stiff>{LL.COMMAND(0)}</HeaderCell>
                 <HeaderCell stiff>{LL.VALUE(0)}</HeaderCell>
                 <HeaderCell stiff>{LL.NAME(0)}</HeaderCell>
-                <HeaderCell></HeaderCell>
               </HeaderRow>
             </Header>
             <Body>
@@ -231,16 +213,6 @@ const Commands = () => {
                   <Cell>{ci.cmd}</Cell>
                   <Cell>{ci.value}</Cell>
                   <Cell>{ci.name}</Cell>
-                  <Cell>
-                    {numChanges === 0 && (
-                      <IconButton
-                        onClick={() => execute(ci.name)}
-                        style={{ backgroundColor: 'transparent' }}
-                      >
-                        <PlayArrowIcon color="primary" sx={{ fontSize: 16 }} />
-                      </IconButton>
-                    )}
-                  </Cell>
                 </Row>
               ))}
             </Body>

interface/src/app/main/CommandsDialog.tsx

@@ -95,7 +95,7 @@ const CommandsDialog = ({
     { immediate: false }
   )
     .onSuccess(() => {
-      toast.success(LL.EXECUTE_COMMAND_SENT());
+      toast.success(LL.COMMAND_EXECUTED());
     })
     .onError((error) => {
       toast.error(String(error.error?.message || 'An error occurred'));
@@ -121,8 +121,8 @@ const CommandsDialog = ({
   return (
     <Dialog sx={dialogStyle} open={open} onClose={handleClose}>
       <DialogTitle>
-        {creating ? `${LL.ADD(1)} ${LL.NEW(0)}` : LL.EDIT()}&nbsp;
-        {LL.COMMAND(1)}
+        {creating ? `${LL.ADD(1)} ` : LL.UPDATE() + '/' + LL.RUN()}&nbsp;
+        {LL.COMMAND(0)}
       </DialogTitle>
       <DialogContent dividers>
         <ValidatedTextField
@@ -195,7 +195,7 @@ const CommandsDialog = ({
             onClick={execute}
             color="success"
           >
-            {LL.EXECUTE()}
+            {LL.RUN()}
           </Button>
         )}
       </DialogActions>

interface/src/app/main/Dashboard.tsx

@@ -334,7 +334,7 @@ const Dashboard = memo(() => {
                                 (di.dv.v === '' || di.dv.v === undefined ? (
                                   <IconButton
                                     size="small"
-                                    aria-label={LL.RUN_COMMAND()}
+                                    aria-label={LL.RUN()}
                                     onClick={() => editDashboardValue(di)}
                                     style={{ backgroundColor: 'transparent' }}
                                   >
@@ -402,7 +402,10 @@ const Dashboard = memo(() => {
       {selectedDashboardItem && selectedDashboardItem.dv && (
         <DevicesDialog
           open={deviceValueDialogOpen}
-          onClose={() => setDeviceValueDialogOpen(false)}
+          onClose={() => {
+            setDeviceValueDialogOpen(false);
+            setSelectedDashboardItem(undefined);
+          }}
           onSave={deviceValueDialogSave}
           selectedItem={selectedDashboardItem.dv}
           writeable={true}

interface/src/app/main/Devices.tsx

@@ -592,6 +592,7 @@ const Devices = memo(() => {
 
   const deviceValueDialogClose = () => {
     setDeviceValueDialogOpen(false);
+    setSelectedDeviceValue(undefined);
     if (selectedDevice !== undefined) {
       void sendDeviceData(selectedDevice);
     }

interface/src/app/main/DevicesDialog.tsx

@@ -30,7 +30,7 @@ import { ValidationError, validate } from 'validators';
 import type Schema from 'validators/schema';
 import type { ValidateFieldsError } from 'validators/schema';
 
-import { DeviceValueUOM, DeviceValueUOM_s } from './types';
+import { DeviceValueUOM, DeviceValueUOM_s, getDeviceValueKind } from './types';
 import type { DeviceValue } from './types';
 
 interface DevicesDialogProps {
@@ -70,7 +70,7 @@ const DevicesDialog = ({
     { immediate: false }
   )
     .onSuccess(() => {
-      toast.success(LL.EXECUTE_COMMAND_SENT());
+      toast.success(LL.COMMAND_EXECUTED());
     })
     .onError((error) => {
       toast.error(String(error.error?.message || 'An error occurred'));
@@ -119,18 +119,20 @@ const DevicesDialog = ({
     return undefined;
   };
 
-  const isCommand =
-    (selectedItem.v === '' || selectedItem.v === undefined) &&
-    Boolean(selectedItem.c);
-  const isSchedulerImmediate = selectedItem.v === undefined;
-  const dialogTitle = isCommand
-    ? isSchedulerImmediate
-      ? LL.EXECUTE() + ' ' + LL.SCHEDULE(0)
-      : LL.RUN_COMMAND()
-    : writeable
-      ? LL.CHANGE_VALUE()
-      : LL.VALUE(0);
-  const buttonLabel = isCommand ? LL.EXECUTE() : LL.UPDATE();
+  const kind = getDeviceValueKind(selectedItem);
+
+  const dialogTitle =
+    kind === 'command' || kind === 'deviceCommand'
+      ? LL.RUN() + ' ' + LL.COMMAND(0)
+      : kind === 'scheduler'
+        ? LL.UPDATE() + ' ' + LL.SCHEDULE(0)
+        : writeable
+          ? LL.CHANGE_VALUE()
+          : LL.VALUE(0);
+
+  const buttonLabel =
+    kind === 'command' || kind === 'deviceCommand' ? LL.RUN() : LL.UPDATE();
+
   const helperText = showHelperText(editItem);
 
   const valueLabel = LL.VALUE(0);
@@ -142,7 +144,7 @@ const DevicesDialog = ({
         <Typography sx={{ mb: 2 }} color="warning" variant="body2">
           {editItem.id.slice(2)}
         </Typography>
-        {!isSchedulerImmediate && (
+        {kind !== 'command' && (
           <Grid container>
             <Grid size={12}>
               {editItem.l ? (
@@ -227,11 +229,15 @@ const DevicesDialog = ({
             </Button>
             <Button
               startIcon={
-                isCommand ? <PlayArrowIcon /> : <WarningIcon color="warning" />
+                kind === 'command' ? (
+                  <PlayArrowIcon />
+                ) : kind === 'deviceEntity' || kind === 'deviceCommand' ? (
+                  <WarningIcon color="warning" />
+                ) : undefined
               }
               variant="outlined"
               onClick={doAction}
-              color={isCommand ? 'success' : 'primary'}
+              color={kind !== 'value' ? 'success' : 'primary'}
             >
               {buttonLabel}
             </Button>

interface/src/app/main/types.ts

@@ -210,6 +210,18 @@ export enum DeviceValueUOM {
   HERTZ
 }
 
+export type DeviceValueKind =
+  'value' | 'scheduler' | 'command' | 'deviceCommand' | 'deviceEntity';
+
+export function getDeviceValueKind(item: DeviceValue): DeviceValueKind {
+  if (!item.c) return 'value';
+  if (item.v !== undefined && item.l !== undefined && item.u === undefined)
+    return 'scheduler';
+  if (item.v === undefined && item.l === undefined) return 'command';
+  if (item.u === DeviceValueUOM.NONE) return 'deviceCommand';
+  return 'deviceEntity';
+}
+
 export const DeviceValueUOM_s = [
   '',
   '°C',
@@ -295,6 +307,7 @@ export const BOARD_PROFILES = {
   LOLIN: 'Lolin D32',
   OLIMEX: 'Olimex ESP32-EVB',
   OLIMEXPOE: 'Olimex ESP32-POE',
+  OLIMEXPOEW: 'Olimex ESP32-POE-ISO WROVER (PSRAM)',
   C3MINI: 'Wemos C3 Mini',
   S2MINI: 'Wemos S2 Mini',
   S3MINI: 'Liligo S3'

interface/src/app/settings/ApplicationSettings.tsx

@@ -1,4 +1,4 @@
-import { useState } from 'react';
+import { useContext, useEffect, useState } from 'react';
 
 import CancelIcon from '@mui/icons-material/Cancel';
 import PowerSettingsNewIcon from '@mui/icons-material/PowerSettingsNew';
@@ -31,6 +31,7 @@ import {
   useLayoutTitle
 } from 'components';
 import { toast } from 'components/toast';
+import { AuthenticatedContext } from 'contexts/authentication';
 import { useI18nContext } from 'i18n/i18n-react';
 import { numberValue, updateValueDirty, useRest } from 'utils';
 import { ValidationError, validate } from 'validators';
@@ -68,6 +69,14 @@ const ApplicationSettings = () => {
     update: writeSettings
   });
 
+  // the menu drawer reads the system name from the authentication context
+  const { setSystemName } = useContext(AuthenticatedContext);
+  useEffect(() => {
+    if (origData?.system_name !== undefined) {
+      setSystemName(origData.system_name);
+    }
+  }, [origData?.system_name, setSystemName]);
+
   const [restarting, setRestarting] = useState<boolean>();
 
   const { LL } = useI18nContext();
@@ -168,7 +177,7 @@ const ApplicationSettings = () => {
     await sendAPI({
       device: 'system',
       cmd: 'sendmail',
-      data: 'Email notification test successful!',
+      data: '"Email notification test successful!"',
       id: 0
     })
       .then(() => {

interface/src/app/settings/DownloadUpload.tsx

@@ -165,11 +165,7 @@ const DownloadUpload = () => {
         {LL.UPLOAD()}
       </Typography>
 
-      <Typography sx={{ pb: 2 }} color="warning" variant="body1">
-        {LL.UPLOAD_TEXT()}:
-      </Typography>
-
-      <SingleUpload doRestart={doRestart} />
+      <SingleUpload text={LL.UPLOAD_BACKUP_TEXT()} doRestart={doRestart} />
     </SectionContent>
   );
 };

interface/src/app/settings/Version.tsx

@@ -1,4 +1,4 @@
-import { memo, useContext, useMemo, useState } from 'react';
+import { memo, useContext, useEffect, useState } from 'react';
 import { Link } from 'react-router';
 
 import CancelIcon from '@mui/icons-material/Cancel';
@@ -412,7 +412,7 @@ const getPlatform = (data: VersionData): string => {
 
 const Version = () => {
   const { LL, locale } = useI18nContext();
-  const { me, versions } = useContext(AuthenticatedContext);
+  const { me, versions, refreshVersions } = useContext(AuthenticatedContext);
 
   const [restarting, setRestarting] = useState<boolean>(false);
   const [confirmFactoryReset, setConfirmFactoryReset] = useState<boolean>(false);
@@ -430,25 +430,27 @@ const Version = () => {
   const [showVersionInfo, setShowVersionInfo] = useState<number>(0); // 1 = stable, 2 = dev, 3 = partition
   const [firmwareSize, setFirmwareSize] = useState<number>(0);
 
-  const latestVersion = useMemo<VersionInfo | undefined>(
-    () =>
-      versions?.stable
-        ? { version: versions.stable.version, date: versions.stable.date }
-        : undefined,
-    [versions?.stable]
-  );
-  const latestDevVersion = useMemo<VersionInfo | undefined>(
-    () =>
-      versions?.dev
-        ? { version: versions.dev.version, date: versions.dev.date }
-        : undefined,
-    [versions?.dev]
-  );
+  const latestVersion: VersionInfo | undefined = versions?.stable
+    ? { version: versions.stable.version, date: versions.stable.date }
+    : undefined;
+  const latestDevVersion: VersionInfo | undefined = versions?.dev
+    ? { version: versions.dev.version, date: versions.dev.date }
+    : undefined;
   const usingDevVersion = versions?.current?.type === 'dev';
   const stableUpgradeAvailable = versions?.stable?.upgradeable ?? false;
   const devUpgradeAvailable = versions?.dev?.upgradeable ?? false;
   const internetLive = Boolean(versions?.stable || versions?.dev);
 
+  useEffect(() => {
+    if (internetLive) {
+      return;
+    }
+    const interval = setInterval(() => {
+      void refreshVersions();
+    }, 3000);
+    return () => clearInterval(interval);
+  }, [internetLive, refreshVersions]);
+
   const { send: sendSetPartition } = useRequest(
     (partition: string) => callAction({ action: 'setPartition', param: partition }),
     { immediate: false }
@@ -805,8 +807,7 @@ const Version = () => {
           </>
         ) : (
           <Typography sx={{ mt: 2 }} color="warning">
-            <WarningIcon color="warning" sx={{ verticalAlign: 'middle', mr: 2 }} />
-            {LL.INTERNET_CONNECTION_REQUIRED()}
+            {LL.INTERNET_CONNECTION_CHECK()}&hellip;
           </Typography>
         )}
         {me.admin && (
@@ -845,7 +846,7 @@ const Version = () => {
             <Typography sx={{ pt: 2, pb: 2 }} variant="h6" color="primary">
               {LL.UPLOAD()}
             </Typography>
-            <SingleUpload doRestart={doRestart} />
+            <SingleUpload text={LL.UPLOAD_FIRMWARE_TEXT()} doRestart={doRestart} />
           </>
         )}
       </Box>
@@ -899,7 +900,7 @@ const Version = () => {
                 startIcon={<PowerSettingsNewIcon />}
                 variant="outlined"
                 onClick={doRestart}
-                color="error"
+                color="success"
               >
                 {LL.RESTART()}
               </Button>
@@ -910,20 +911,13 @@ const Version = () => {
             sx={{
               mt: 2,
               display: 'flex',
-              justifyContent: 'flex-end',
+              justifyContent: 'space-between',
+              alignItems: 'center',
               flexWrap: 'nowrap',
               whiteSpace: 'nowrap',
               gap: 1
             }}
           >
-            <Button
-              startIcon={<PowerSettingsNewIcon />}
-              variant="outlined"
-              onClick={handleRestartClick}
-              color="error"
-            >
-              {LL.RESTART()}
-            </Button>
             {!data.disable_reset && (
               <Button
                 startIcon={<SettingsBackupRestoreIcon />}
@@ -934,6 +928,14 @@ const Version = () => {
                 {LL.FACTORY_RESET()}
               </Button>
             )}
+            <Button
+              startIcon={<PowerSettingsNewIcon />}
+              variant="outlined"
+              onClick={handleRestartClick}
+              color="success"
+            >
+              {LL.RESTART()}
+            </Button>
           </Box>
         </>
       )}

interface/src/app/settings/network/NetworkSettings.tsx

@@ -22,6 +22,7 @@ import {
 
 import * as NetworkApi from 'api/network';
 import { API } from 'api/app';
+import { readSystemStatus } from 'api/system';
 
 import { updateState, useRequest } from 'alova/client';
 import type { APIcall } from 'app/main/types';
@@ -50,6 +51,8 @@ import { isNetworkOpen, networkSecurityMode } from './WiFiNetworkSelector';
 const NetworkSettings = () => {
   const { LL } = useI18nContext();
 
+  const { data: hardwareData } = useRequest(readSystemStatus);
+
   const { selectedNetwork, deselectNetwork } = useContext(WiFiConnectionContext);
 
   const [initialized, setInitialized] = useState(false);
@@ -92,7 +95,8 @@ const NetworkSettings = () => {
             nosleep: true,
             enableMDNS: true,
             enableCORS: false,
-            CORSOrigin: '*'
+            CORSOrigin: '*',
+            eth_10mbit: current_data ? current_data.eth_10mbit : false
           })
         );
       }
@@ -136,7 +140,7 @@ const NetworkSettings = () => {
   };
 
   const content = () => {
-    if (!data) {
+    if (!data || !hardwareData) {
       return <FormLoader onRetry={loadData} errorMessage={errorMessage || ''} />;
     }
 
@@ -246,6 +250,23 @@ const NetworkSettings = () => {
           }
           label={LL.NETWORK_LOW_BAND()}
         />
+        {hardwareData.esp_platform === 'ESP32' && (
+          <>
+            <Typography sx={{ pt: 2 }} variant="h6" color="primary">
+              Ethernet
+            </Typography>
+            <BlockFormControlLabel
+              control={
+                <Checkbox
+                  name="eth_10mbit"
+                  checked={data.eth_10mbit}
+                  onChange={updateFormValue}
+                />
+              }
+              label="Force 10Mbit half-duplex"
+            />
+          </>
+        )}
         <Typography sx={{ pt: 2 }} variant="h6" color="primary">
           {LL.GENERAL_OPTIONS()}
         </Typography>

interface/src/app/status/SystemLog.tsx

@@ -369,7 +369,7 @@ const SystemLog = () => {
           ) : (
             <>
               {data.developer_mode && (
-                <IconButton onClick={sendReadCommand} aria-label={LL.EXECUTE()}>
+                <IconButton onClick={sendReadCommand} aria-label={LL.RUN()}>
                   <PlayArrowIcon color="primary" />
                 </IconButton>
               )}

interface/src/components/layout/LayoutDrawer.tsx

@@ -1,10 +1,8 @@
-import { memo } from 'react';
+import { memo, useContext } from 'react';
 
 import { Box, Divider, Drawer, Toolbar, Typography, styled } from '@mui/material';
 
-import { readSettings } from 'api/app';
-
-import { useRequest } from 'alova/client';
+import { AuthenticatedContext } from 'contexts/authentication';
 import { PROJECT_NAME } from 'env';
 
 import { DRAWER_WIDTH } from './Layout';
@@ -27,8 +25,7 @@ interface LayoutDrawerProps {
 }
 
 const LayoutDrawerComponent = ({ mobileOpen, onClose }: LayoutDrawerProps) => {
-  const { data: settings } = useRequest(readSettings);
-  const system_name = settings?.system_name;
+  const { systemName } = useContext(AuthenticatedContext);
 
   const drawer = (
     <>
@@ -43,9 +40,9 @@ const LayoutDrawerComponent = ({ mobileOpen, onClose }: LayoutDrawerProps) => {
             }}
           >
             <Typography>{PROJECT_NAME}</Typography>
-            {system_name && (
+            {systemName && (
               <Typography color="secondary" variant="body2">
-                {system_name}
+                {systemName}
               </Typography>
             )}
           </Box>

interface/src/components/upload/SingleUpload.tsx

@@ -14,9 +14,10 @@ import { LinearProgressWithLabel } from './LinearProgressWithLabel';
 
 interface SingleUploadProps {
   doRestart: () => void;
+  text: string;
 }
 
-const SingleUpload = ({ doRestart }: SingleUploadProps) => {
+const SingleUpload = ({ doRestart, text }: SingleUploadProps) => {
   const [md5, setMd5] = useState<string>();
   const [file, setFile] = useState<File>();
   const { LL } = useI18nContext();
@@ -29,11 +30,22 @@ const SingleUpload = ({ doRestart }: SingleUploadProps) => {
   } = useRequest(SystemApi.uploadFile, {
     immediate: false
   }).onSuccess(({ data }) => {
-    if (data && typeof data === 'object' && 'md5' in data) {
-      setMd5((data as { md5: string }).md5);
-      toast.success(LL.UPLOAD() + ' MD5 ' + LL.SUCCESSFUL());
+    let payload = data;
+    if (typeof payload === 'string' && payload.length > 0) {
+      try {
+        payload = JSON.parse(payload);
+      } catch {
+        payload = data;
+      }
+    }
+    if (payload && typeof payload === 'object' && 'md5' in payload) {
+      setMd5((payload as { md5: string }).md5);
+      toast.success(LL.UPLOAD_MD5_RECEIVED());
       setFile(undefined);
     } else {
+      if (payload && typeof payload === 'object' && 'md5_ok' in payload) {
+        toast.success(LL.UPLOAD_MD5_MATCHED());
+      }
       doRestart();
     }
   });
@@ -80,12 +92,17 @@ const SingleUpload = ({ doRestart }: SingleUploadProps) => {
           </Button>
         </>
       ) : (
-        <DragNdrop text={LL.UPLOAD_DROP_TEXT()} onFileSelected={setFile} />
+        <DragNdrop
+          text={(md5 ? LL.UPLOAD_MD5_RECEIVED() : text) + '...'}
+          onFileSelected={setFile}
+        />
       )}
 
       {md5 && (
         <Box sx={{ mt: 2 }}>
-          <Typography variant="body2">{'MD5: ' + md5}</Typography>
+          <Typography variant="body2" color="success">
+            {'MD5: ' + md5}
+          </Typography>
         </Box>
       )}
     </>

interface/src/contexts/authentication/Authentication.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useMemo, useState } from 'react';
+import { useCallback, useEffect, useState } from 'react';
 import type { FC } from 'react';
 import { useNavigate } from 'react-router';
 
@@ -23,6 +23,7 @@ const Authentication: FC<RequiredChildrenProps> = ({ children }) => {
   const [initialized, setInitialized] = useState<boolean>(false);
   const [me, setMe] = useState<Me>();
   const [versions, setVersions] = useState<VersionsResponse>();
+  const [systemName, setSystemName] = useState<string>();
 
   const { send: sendVerifyAuthorization } = useRequest(verifyAuthorization(), {
     immediate: false
@@ -33,7 +34,9 @@ const Authentication: FC<RequiredChildrenProps> = ({ children }) => {
     { immediate: false }
   )
     .onSuccess((event) => {
-      setVersions(event.data as VersionsResponse);
+      const response = event.data as VersionsResponse;
+      setVersions(response);
+      setSystemName(response.system_name);
     })
     .onError(() => {
       setVersions(undefined);
@@ -60,6 +63,7 @@ const Authentication: FC<RequiredChildrenProps> = ({ children }) => {
     AuthenticationApi.clearAccessToken();
     setMe(undefined);
     setVersions(undefined);
+    setSystemName(undefined);
     if (doRedirect) {
       void navigate('/', { replace: true });
     }
@@ -88,21 +92,20 @@ const Authentication: FC<RequiredChildrenProps> = ({ children }) => {
     void refresh();
   }, [refresh]);
 
-  const obj = useMemo(
-    () => ({
-      signIn,
-      signOut,
-      refresh,
-      refreshVersions,
-      ...(me && { me }),
-      ...(versions && { versions })
-    }),
-    [signIn, signOut, me, refresh, refreshVersions, versions]
-  );
-
   if (initialized) {
     return (
-      <AuthenticationContext.Provider value={obj}>
+      <AuthenticationContext.Provider
+        value={{
+          signIn,
+          signOut,
+          refresh,
+          refreshVersions,
+          setSystemName,
+          ...(me && { me }),
+          ...(versions && { versions }),
+          ...(systemName !== undefined && { systemName })
+        }}
+      >
         {children}
       </AuthenticationContext.Provider>
     );

interface/src/contexts/authentication/context.ts

@@ -9,6 +9,8 @@ export interface AuthenticationContextValue {
   me?: Me;
   versions?: VersionsResponse;
   refreshVersions: () => Promise<void>;
+  systemName?: string;
+  setSystemName: (systemName: string) => void;
 }
 
 const AuthenticationContextDefaultValue = {} as AuthenticationContextValue;

interface/src/i18n/cs/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const cs: Translation = {
   LANGUAGE: 'Jazyk',
   RETRY: 'Zkusit znovu',
-  LOADING: 'Načítání',
   IS_REQUIRED: '{0} je vyžadováno',
   SIGN_IN: 'Přihlásit se',
   SIGN_OUT: 'Odhlásit se',
@@ -37,13 +36,11 @@ const cs: Translation = {
   VALUE: '{{value|Value}}',
   DEVICES: 'Zařízení',
   SENSORS: 'Senzory',
-  RUN_COMMAND: 'Zavolat příkaz',
   CHANGE_VALUE: 'Změnit hodnotu',
   CANCEL: 'Zrušit',
   REMOVE_ALL: 'Odebrat vše',
   APPLY_CHANGES: 'Použít změny ({0})',
   UPDATE: 'Aktualizovat',
-  EXECUTE: 'Provést',
   REMOVE: 'Odebrat',
   PROBLEM_UPDATING: 'Problém s aktualizací',
   PROBLEM_LOADING: 'Problém s načítáním',
@@ -52,8 +49,6 @@ const cs: Translation = {
   SETTINGS: 'Nastavení',
   UPDATED_OF: '{0} Aktualizováno',
   UPDATE_OF: '{0} Aktualizace',
-  REMOVED_OF: '{0} Odebráno',
-  DELETION_OF: '{0} Smazání',
   OFFSET: 'Offset',
   FACTOR: 'Faktor',
   FREQ: 'Frekvence',
@@ -66,17 +61,14 @@ const cs: Translation = {
   TEMP_SENSORS: 'Teplotní senzory',
   WRITE_CMD_SENT: 'Zapisovací příkaz odeslán',
   EMS_BUS_WARNING: 'EMS sběrnice je odpojena. Pokud toto varování přetrvává i po několika sekundách, zkontrolujte nastavení a profil desky',
-  EMS_BUS_SCANNING: 'Prohledávání zařízení na EMS sběrnici...',
   CONNECTED: 'Připojeno',
   TX_ISSUES: 'Problémy s Tx - zkontrolujte režim Tx',
   DISCONNECTED: 'Odpojeno',
-  EMS_SCAN: 'Opravdu chcete zahájit úplné skenování zařízení na EMS sběrnici?',
   DATA_TRAFFIC: 'Datový provoz',
   EMS_DEVICE: 'EMS zařízení',
   SUCCESS: 'ÚSPĚCH',
   FAIL: 'SELHÁNÍ',
   QUALITY: 'KVALITA',
-  SCAN: 'Skenovat',
   STATUS_NAMES: [
     'Přijaté EMS telegramy (Rx)',
     'Čtení EMS (Tx)',
@@ -127,7 +119,6 @@ const cs: Translation = {
   ENUM_FORMAT: 'Formát enum v API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Povolit 1-Wire parazitní napájení',
-  LOGGING: 'Protokolování',
   LOG_HEX: 'Protokolovat EMS telegramy v hexadecimálním formátu',
   ENABLE_SYSLOG: 'Povolit Syslog',
   LOG_LEVEL: 'Úroveň protokolování',
@@ -172,7 +163,6 @@ const cs: Translation = {
   CLOSE: 'Zavřít',
   USE: 'Použít',
   FACTORY_RESET: 'Obnovení továrního nastavení',
-  SYSTEM_FACTORY_TEXT: 'Zařízení bylo obnoveno do továrního nastavení a nyní se restartuje',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Opravdu chcete resetovat zařízení EMS-ESP do továrního nastavení?',
   AVAILABLE_VERSION: 'Nejnovější dostupné verze',
   STABLE: 'Stabilní',
@@ -188,8 +178,6 @@ const cs: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Vytvořte zálohu svého nastavení a konfigurace',
   DOWNLOAD_SETTINGS_TEXT2: 'Exportovat všechny hodnoty',
   DOWNLOAD_SYSTEM_BACKUP: 'Systémová záloha',
-  UPLOAD_TEXT: 'Nahrajte nový soubor firmwaru (.bin) nebo záložní soubor (.json)',
-  UPLOAD_DROP_TEXT: 'Přetáhněte soubor sem nebo klikněte pro výběr',
   ERROR: 'Neočekávaná chyba, zkuste to prosím znovu',
   TIME_SET: 'Čas nastaven',
   MANAGE_USERS: 'Spravovat uživatele',
@@ -257,9 +245,7 @@ const cs: Translation = {
   NETWORK_SCAN: 'Skenovat WiFi sítě',
   IDLE: 'Nečinný',
   LOST: 'Ztraceno',
-  SCANNING: 'Skenování',
   SCAN_AGAIN: 'Skenovat znovu',
-  NETWORK_SCANNER: 'Síťový skener',
   NETWORK_NO_WIFI: 'Nenalezeny žádné WiFi sítě',
   NETWORK_BLANK_BSSID: 'ponechte prázdné pokud použijete jen SSID',
   TX_POWER: 'Vysílací výkon',
@@ -294,9 +280,6 @@ const cs: Translation = {
   ONCHANGE: 'Při změně',
   CONDITION: 'Podmínka',
   SCHEDULE_UPDATED: 'Harmonogram aktualizován',
-  SCHEDULE_TIMER_1: 'při startu',
-  SCHEDULE_TIMER_2: 'každou minutu',
-  SCHEDULE_TIMER_3: 'každou hodinu',
   CUSTOM_ENTITIES: 'Vlastní entity',
   ENTITIES_HELP_1: 'Definujte vlastní EMS entity nebo dynamické uživatelské proměnné',
   ENTITIES_UPDATED: 'Entity aktualizovány',
@@ -312,9 +295,7 @@ const cs: Translation = {
   ACTIVELOW: 'Aktivní nízká',
   UNCHANGED: 'Beze změny',
   ALWAYS: 'Vždy',
-  ACTIVITY: 'Aktivita',
   CONFIGURE: '{0} Konfigurovat',
-  SYSTEM_MEMORY: 'Paměť systému',
   APPLICATION_SETTINGS_1: 'Upravit nastavení aplikace EMS-ESP',
   SECURITY_1: 'Přidat nebo odebrat uživatele',
   DOWNLOAD_UPLOAD_1: 'Stáhnout a nahrát nastavení a firmware',
@@ -326,7 +307,6 @@ const cs: Translation = {
   RENAME: 'Přejmenovat',
   ENABLE_MODBUS: 'Povolit Modbus',
   VIEW_LOG: 'Zobrazit záznam pro diagnostiku problémů',
-  UPLOAD_DRAG: 'přetáhněte soubor sem nebo klikněte pro výběr',
   SERVICES: 'Služby',
   ALLVALUES: 'Všechny hodnoty',
   SPECIAL_FUNCTIONS: 'Speciální funkce',
@@ -352,10 +332,8 @@ const cs: Translation = {
   THIS_VERSION: 'Tato verze',
   PLATFORM: 'Platforma',
   RELEASE_TYPE: 'Typ sestavení',
-  INTERNET_CONNECTION_REQUIRED: 'Pro automatickou kontrolu a instalaci aktualizací je třeba internetové připojení',
   SWITCH_RELEASE_TYPE: 'Přepnout na {0} verzi',
   FIRMWARE_VERSION_INFO: 'Informace o verzi firmwaru',
-  NO_DATA: 'žádné údaje',
   USER_PROFILE: 'Uživatelský profil',
   STORED_VERSIONS: 'Uložené verze',
   ONLINE_HELP: 'online nápověda',
@@ -366,9 +344,14 @@ const cs: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email byl úspěšně odeslán',
   SYSTEM_NAME: 'Název systému',
   COMMANDS: 'Příkazy',
-  COMMANDS_UPDATED: 'Příkazy byly aktualizovány',
   COMMANDS_HELP_1: 'Definujte vlastní příkazy pro magistrali EMS',
-  EXECUTE_COMMAND_SENT: 'Příkaz odeslán',
+  COMMAND_EXECUTED: 'Příkaz úspěšně spuštěn',
+  RUN: 'Spustit příkaz',
+  INTERNET_CONNECTION_CHECK: 'Kontrola online pro dostupné verze',
+  UPLOAD_BACKUP_TEXT: 'Klikněte, abyste vybrali nebo přetáhli a pustili soubor zálohy (.json) sem',
+  UPLOAD_FIRMWARE_TEXT: 'Klikněte, abyste vybrali nebo přetáhli a pustili soubor firmware .bin/.md5 sem',
+  UPLOAD_MD5_RECEIVED: 'Digest přijat, nyní nahrajte firmware .bin',
+  UPLOAD_MD5_MATCHED: 'MD5 souhlasí, firmware se instaluje...'
 };
 
 export default cs;

interface/src/i18n/de/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const de: Translation = {
   LANGUAGE: 'Sprache',
   RETRY: 'Neuer Versuch',
-  LOADING: 'Laden',
   IS_REQUIRED: '{0} ist erforderlich',
   SIGN_IN: 'Einloggen',
   SIGN_OUT: 'Ausloggen',
@@ -37,13 +36,11 @@ const de: Translation = {
   VALUE: '{{wert|Wert}}',
   DEVICES: 'Geräte',
   SENSORS: 'Sensoren',
-  RUN_COMMAND: 'Befehl ausführen',
   CHANGE_VALUE: 'Wert ändern',
   CANCEL: 'Abbrechen',
   REMOVE_ALL: 'Alles entfernen',
   APPLY_CHANGES: 'Änderungen anwenden ({0})',
   UPDATE: 'Aktualisieren',
-  EXECUTE: 'Ausführen',
   REMOVE: 'Entfernen',
   PROBLEM_UPDATING: 'Problem beim Aktualisieren',
   PROBLEM_LOADING: 'Problem beim Laden',
@@ -52,8 +49,6 @@ const de: Translation = {
   SETTINGS: 'Einstellungen',
   UPDATED_OF: '{0} Aktualisiert',
   UPDATE_OF: '{0} Aktualisieren',
-  REMOVED_OF: '{0} Entfernt',
-  DELETION_OF: '{0} Löschung',
   OFFSET: 'Position',
   FACTOR: 'Faktor',
   FREQ: 'Frequenz',
@@ -66,17 +61,14 @@ const de: Translation = {
   TEMP_SENSORS: 'Temperatursensoren',
   WRITE_CMD_SENT: 'Befehl schreiben wurde gesendet',
   EMS_BUS_WARNING: 'EMS-Bus getrennt. Wenn diese Warnung nach einigen Sekunden immer noch besteht, überprüfen Sie bitte die Einstellungen und das Board-Profil.',
-  EMS_BUS_SCANNING: 'Suche nach EMS Geräten...',
   CONNECTED: 'Verbunden',
   TX_ISSUES: 'Tx-Probleme - Versuchen Sie einen anderen Tx-Modus',
   DISCONNECTED: 'Getrennt',
-  EMS_SCAN: 'Möchten Sie wirklich eine vollständige Gerätesuche des EMS-Busses starten?',
   DATA_TRAFFIC: 'Datenverkehr',
   EMS_DEVICE: 'EMS Gerät',
   SUCCESS: 'ERFOLG',
   FAIL: 'FEHLER',
   QUALITY: 'QUALITÄT',
-  SCAN: 'Suche',
   STATUS_NAMES: [
     'EMS-Telegramme empfangen (Rx)',
     'EMS-Telegramme gelesen (Tx)',
@@ -127,7 +119,6 @@ const de: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: '1-Wire parasitäre Stomversorgung',
-  LOGGING: 'Protokollierung',
   LOG_HEX: 'EMS-Telegramme hexadezimal protokollieren',
   ENABLE_SYSLOG: 'Syslog aktivieren',
   LOG_LEVEL: 'Protokollebene',
@@ -172,7 +163,6 @@ const de: Translation = {
   CLOSE: 'Schließen',
   USE: 'Verwenden Sie',
   FACTORY_RESET: 'Werkseinstellung',
-  SYSTEM_FACTORY_TEXT: 'EMS-ESP wurde auf Werkseinstellung gesetzt und startet als Zugangspunkt neu.',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Sind Sie sicher, alle Einstellungen auf Werkseinstellung zu setzen?',
   AVAILABLE_VERSION: 'Neuesten verfügbaren Versionen',
   STABLE: 'Stabil',
@@ -188,8 +178,6 @@ const de: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Erstellen Sie eine Sicherung Ihrer Konfigurationen und Einstellungen',
   DOWNLOAD_SETTINGS_TEXT2: 'Exportiere alle Werte',
   DOWNLOAD_SYSTEM_BACKUP: 'Systemsicherung',
-  UPLOAD_TEXT: 'Laden Sie eine neue Firmware-Datei (.bin) oder eine Sicherungsdatei (.json) hoch',
-  UPLOAD_DROP_TEXT: 'Legen Sie eine Firmware-Datei (.bin) ab oder klicken Sie hier',
   ERROR: 'Unerwarteter Fehler, bitte versuchen Sie es erneut.',
   TIME_SET: 'Zeit gesetzt',
   MANAGE_USERS: 'Nutzerverwaltung',
@@ -257,9 +245,7 @@ const de: Translation = {
   NETWORK_SCAN: 'Suche nach WiFi-Netzwerken',
   IDLE: 'Leerlauf',
   LOST: 'Verloren',
-  SCANNING: 'Suche',
   SCAN_AGAIN: 'Erneute Suche',
-  NETWORK_SCANNER: 'Netzwerksuche',
   NETWORK_NO_WIFI: 'Keine WiFi-Netzwerke gefunden',
   NETWORK_BLANK_BSSID: 'Freilassen, um nur SSID für die Verbindung zu nutzen.',
   TX_POWER: 'Tx Leistung',
@@ -294,9 +280,6 @@ const de: Translation = {
   ONCHANGE: 'Bei Änderung',
   CONDITION: 'Zustand',
   SCHEDULE_UPDATED: 'Zeitplan aktualisiert',
-  SCHEDULE_TIMER_1: 'beim Start',
-  SCHEDULE_TIMER_2: 'jede Minute',
-  SCHEDULE_TIMER_3: 'jede Stunde',
   CUSTOM_ENTITIES: 'Individuelle Entitäten',
   ENTITIES_HELP_1: 'Definition eigener EMS-Werte oder dynamischer Variablen',
   ENTITIES_UPDATED: 'Entitäten gespeichert',
@@ -312,9 +295,7 @@ const de: Translation = {
   ACTIVELOW: 'Aktiv Negativ',
   UNCHANGED: 'Unverändert',
   ALWAYS: 'Immer',
-  ACTIVITY: 'Aktivität',
   CONFIGURE: 'Konfiguriere {0}',
-  SYSTEM_MEMORY: 'Systemspeicher',
   APPLICATION_SETTINGS_1: 'Ändern Sie die EMS-ESP-Anwendungseinstellungen.',
   SECURITY_1: 'Benutzer hinzufügen oder entfernen',
   DOWNLOAD_UPLOAD_1: 'Einstellungen und Firmware herunterladen/hochladen',
@@ -326,7 +307,6 @@ const de: Translation = {
   RENAME: 'Umbenennen',
   ENABLE_MODBUS: 'Modbus aktivieren',
   VIEW_LOG: 'Sehen Sie sich das Protokoll an, um Probleme zu diagnostizieren.',
-  UPLOAD_DRAG: 'Ziehen Sie eine Datei hierher oder klicken Sie, um eine auszuwählen.',
   SERVICES: 'Dienste',
   ALLVALUES: 'Alle Werte',
   SPECIAL_FUNCTIONS: 'Sonderfunktionen',
@@ -352,10 +332,8 @@ const de: Translation = {
   THIS_VERSION: 'Diese Version',
   PLATFORM: 'Plattform',
   RELEASE_TYPE: 'Release Typ',
-  INTERNET_CONNECTION_REQUIRED: 'Für die automatische Versionsprüfung und Aktualisierung ist eine Internetverbindung erforderlich',
   SWITCH_RELEASE_TYPE: 'Zum {0}-Release wechseln',
   FIRMWARE_VERSION_INFO: 'Firmware-Versionsinformation',
-  NO_DATA: 'Keine Daten',
   USER_PROFILE: 'Benutzerprofil',
   STORED_VERSIONS: 'Gespeicherte Versionen',
   ONLINE_HELP: 'Online-Hilfe',
@@ -366,9 +344,14 @@ const de: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email erfolgreich gesendet',
   SYSTEM_NAME: 'Systemname',
   COMMANDS: 'Befehle',
-  COMMANDS_UPDATED: 'Befehle wurden aktualisiert',
   COMMANDS_HELP_1: 'Definieren Sie eigene Befehle für die EMS-Magistral',
-  EXECUTE_COMMAND_SENT: 'Befehl gesendet',
+  COMMAND_EXECUTED: 'Befehl erfolgreich ausgeführt',
+  RUN: 'Befehl ausführen',
+  INTERNET_CONNECTION_CHECK: 'Online-Prüfung auf verfügbare Versionen',
+  UPLOAD_BACKUP_TEXT: 'Klicken Sie, um eine Sicherungsdatei (.json) auszuwählen oder zu ziehen und abzulegen',
+  UPLOAD_FIRMWARE_TEXT: 'Klicken Sie, um eine Firmware-Datei (.bin/.md5) auszuwählen oder zu ziehen und abzulegen',
+  UPLOAD_MD5_RECEIVED: 'Prüfsumme empfangen, jetzt die Firmware-Datei (.bin) hochladen',
+  UPLOAD_MD5_MATCHED: 'MD5 stimmt überein, Firmware wird installiert...'
 };
 
 export default de;

interface/src/i18n/en/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const en: Translation = {
   LANGUAGE: 'Language',
   RETRY: 'Retry',
-  LOADING: 'Loading',
   IS_REQUIRED: '{0} is required',
   SIGN_IN: 'Sign In',
   SIGN_OUT: 'Sign Out',
@@ -37,13 +36,11 @@ const en: Translation = {
   VALUE: '{{value|Value}}',
   DEVICES: 'Devices',
   SENSORS: 'Sensors',
-  RUN_COMMAND: 'Call Command',
   CHANGE_VALUE: 'Change Value',
   CANCEL: 'Cancel',
   REMOVE_ALL: 'Remove All',
   APPLY_CHANGES: 'Apply Changes ({0})',
   UPDATE: 'Update',
-  EXECUTE: 'Execute',
   REMOVE: 'Remove',
   PROBLEM_UPDATING: 'Problem updating',
   PROBLEM_LOADING: 'Problem loading',
@@ -52,8 +49,6 @@ const en: Translation = {
   SETTINGS: 'Settings',
   UPDATED_OF: '{0} Updated',
   UPDATE_OF: '{0} Update',
-  REMOVED_OF: '{0} Removed',
-  DELETION_OF: '{0} Deletion',
   OFFSET: 'Offset',
   FACTOR: 'Factor',
   FREQ: 'Frequency',
@@ -66,17 +61,14 @@ const en: Translation = {
   TEMP_SENSORS: 'Temperature Sensors',
   WRITE_CMD_SENT: 'Write command sent',
   EMS_BUS_WARNING: 'EMS bus disconnected. If this warning still persists after a few seconds please check settings and board profile',
-  EMS_BUS_SCANNING: 'Scanning for EMS devices...',
   CONNECTED: 'Connected',
   TX_ISSUES: 'Tx issues - check Tx Mode',
   DISCONNECTED: 'Disconnected',
-  EMS_SCAN: 'Are you sure you want to initiate a full device scan of the EMS bus?',
   DATA_TRAFFIC: 'Data Traffic',
   EMS_DEVICE: 'EMS Device',
   SUCCESS: 'SUCCESS',
   FAIL: 'FAIL',
   QUALITY: 'QUALITY',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'EMS Telegrams Received (Rx)',
     'EMS Reads (Tx)',
@@ -127,7 +119,6 @@ const en: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Enable 1-Wire Parasite-Power',
-  LOGGING: 'Logging',
   LOG_HEX: 'Log EMS telegrams in hexadecimal',
   ENABLE_SYSLOG: 'Enable Syslog',
   LOG_LEVEL: 'Log Level',
@@ -172,7 +163,6 @@ const en: Translation = {
   CLOSE: 'Close',
   USE: 'Use',
   FACTORY_RESET: 'Factory Reset',
-  SYSTEM_FACTORY_TEXT: 'Device has been factory reset and will now restart',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Are you sure you want to reset EMS-ESP to its factory defaults?',
   AVAILABLE_VERSION: 'Latest Available Versions',
   STABLE: 'Stable',
@@ -188,8 +178,6 @@ const en: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings',
   DOWNLOAD_SETTINGS_TEXT2: 'Export all values',
   DOWNLOAD_SYSTEM_BACKUP: 'System Backup',
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)',
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here',
   ERROR: 'Unexpected Error, please try again',
   TIME_SET: 'Time set',
   MANAGE_USERS: 'Manage Users',
@@ -257,9 +245,7 @@ const en: Translation = {
   NETWORK_SCAN: 'Scan WiFi Networks',
   IDLE: 'Idle',
   LOST: 'Lost',
-  SCANNING: 'Scanning',
   SCAN_AGAIN: 'Scan again',
-  NETWORK_SCANNER: 'Network Scanner',
   NETWORK_NO_WIFI: 'No WiFi networks found',
   NETWORK_BLANK_BSSID: 'leave blank to use only SSID',
   TX_POWER: 'Tx Power',
@@ -294,9 +280,6 @@ const en: Translation = {
   ONCHANGE: 'On Change',
   CONDITION: 'Condition',
   SCHEDULE_UPDATED: 'Schedule updated',
-  SCHEDULE_TIMER_1: 'on startup',
-  SCHEDULE_TIMER_2: 'every minute',
-  SCHEDULE_TIMER_3: 'every hour',
   CUSTOM_ENTITIES: 'Custom Entities',
   ENTITIES_HELP_1: 'Define custom EMS entities or dynamic user variables',
   ENTITIES_UPDATED: 'Entities updated',
@@ -312,9 +295,7 @@ const en: Translation = {
   ACTIVELOW: 'Active Low',
   UNCHANGED: 'Unchanged',
   ALWAYS: 'Always',
-  ACTIVITY: 'Activity',
   CONFIGURE: 'Configure {0}',
-  SYSTEM_MEMORY: 'System Memory',
   APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
   SECURITY_1: 'Add or remove users',
   DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
@@ -326,7 +307,6 @@ const en: Translation = {
   RENAME: 'Rename',
   ENABLE_MODBUS: 'Enable Modbus',
   VIEW_LOG: 'View log to diagnose issues',
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one',
   SERVICES: 'Services',
   ALLVALUES: 'All Values',
   SPECIAL_FUNCTIONS: 'Special Functions',
@@ -352,10 +332,8 @@ const en: Translation = {
   THIS_VERSION: 'This Version',
   PLATFORM: 'Platform',
   RELEASE_TYPE: 'Release Type',
-  INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading',
   SWITCH_RELEASE_TYPE: 'Switch to {0} release',
   FIRMWARE_VERSION_INFO: 'Firmware Version Information',
-  NO_DATA: 'No data',
   USER_PROFILE: 'User Profile',
   STORED_VERSIONS: 'Stored Versions',
   ONLINE_HELP: 'online help',
@@ -366,9 +344,14 @@ const en: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email sent successfully',
   SYSTEM_NAME: 'System Name',
   COMMANDS: 'Commands',
-  COMMANDS_UPDATED: 'Commands updated',
   COMMANDS_HELP_1: 'Define reusable named commands below. These can be executed from the console, API/MQTT, or referenced by the Scheduler',
-  EXECUTE_COMMAND_SENT: 'Command sent',
+  COMMAND_EXECUTED: 'Command executed successfully',
+  RUN: 'Run',
+  INTERNET_CONNECTION_CHECK: 'Checking online for available versions',
+  UPLOAD_BACKUP_TEXT: 'Click to select or Drag&Drop a backup file (.json) here',
+  UPLOAD_FIRMWARE_TEXT: 'Click to select or Drag&Drop a firmware .bin/.md5 file',
+  UPLOAD_MD5_RECEIVED: 'Digest received, now upload the firmware .bin file',
+  UPLOAD_MD5_MATCHED: 'MD5 matches, installing firmware...'
 };
 
 export default en;

interface/src/i18n/fr/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const fr: Translation = {
   LANGUAGE: 'Langue',
   RETRY: 'Réessayer',
-  LOADING: 'Chargement',
   IS_REQUIRED: '{0} est requis',
   SIGN_IN: 'Se connecter',
   SIGN_OUT: 'Se déconnecter',
@@ -37,13 +36,11 @@ const fr: Translation = {
   VALUE: 'Valeur',
   DEVICES: 'Appareils',
   SENSORS: 'Capteurs',
-  RUN_COMMAND: 'Lancer une commande',
   CHANGE_VALUE: 'Changer la valeur',
   CANCEL: 'Annuler',
   REMOVE_ALL: 'Supprimer tout',
   APPLY_CHANGES: 'Appliquer les changements ({0})',
   UPDATE: 'Update',
-  EXECUTE: 'Execute',
   REMOVE: 'Enlever',
   PROBLEM_UPDATING: 'Problème lors de la mise à jour',
   PROBLEM_LOADING: 'Problème lors du chargement',
@@ -52,8 +49,6 @@ const fr: Translation = {
   SETTINGS: 'Paramètres',
   UPDATED_OF: '{0} mis à jour',
   UPDATE_OF: 'Mise à jour de {0}',
-  REMOVED_OF: '{0} enlevé',
-  DELETION_OF: '{0} supprimé',
   OFFSET: 'Offset',
   FACTOR: 'Facteur',
   FREQ: 'Fréquence',
@@ -66,17 +61,14 @@ const fr: Translation = {
   TEMP_SENSORS: 'Capteurs de température',
   WRITE_CMD_SENT: 'Envoyer la commande sent',
   EMS_BUS_WARNING: 'Bus EMS déconnecté. Si ce message persiste après quelques secondes, vérifiez les paramètres et la configuration de la carte.',
-  EMS_BUS_SCANNING: 'Scan des appareils EMS...',
   CONNECTED: 'Connecté',
   TX_ISSUES: 'Problèmes de transmission (Tx) - Essayez un autre mode Tx',
   DISCONNECTED: 'Déconnecté',
-  EMS_SCAN: 'Etes-vous sûr de vouloir lancer un scan complet du bus EMS ?',
   DATA_TRAFFIC: 'Traffic des données',
   EMS_DEVICE: 'Appareils EMS',
   SUCCESS: 'SUCCÈS',
   FAIL: 'ÉCHEC',
   QUALITY: 'QUALITÉ',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'Télégrammes EMS reçus (Rx)',
     'Lectures EMS (Tx)',
@@ -127,7 +119,6 @@ const fr: Translation = {
   ENUM_FORMAT: 'Format enum API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Activer la puissance 1-wire parasite',
-  LOGGING: 'Journal',
   LOG_HEX: 'Enregistrer les télégrammes EMS en hexadécimal',
   ENABLE_SYSLOG: 'Activer les logs système',
   LOG_LEVEL: 'Niveau de log',
@@ -172,7 +163,6 @@ const fr: Translation = {
   CLOSE: 'Fermer',
   USE: 'Utiliser',
   FACTORY_RESET: 'Réinitialisation',
-  SYSTEM_FACTORY_TEXT: "L'appareil a été réinitialisé et va maintenant redémarrer",
   SYSTEM_FACTORY_TEXT_DIALOG: "Êtes-vous sûr de vouloir réinitialiser l'appareil à ses paramètres d'usine ?",
   AVAILABLE_VERSION: 'Versions disponibles',
   STABLE: 'Stable',
@@ -188,8 +178,6 @@ const fr: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Créer une sauvegarde de vos paramètres et configurations',
   DOWNLOAD_SETTINGS_TEXT2: 'Exporter toutes les valeurs',
   DOWNLOAD_SYSTEM_BACKUP: 'Sauvegarde système',
-  UPLOAD_TEXT: 'Télécharger un nouveau fichier firmware (.bin) ou une sauvegarde (.json)',
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here',
   ERROR: 'Erreur inattendue, veuillez réessayer',
   TIME_SET: 'Time set',
   MANAGE_USERS: 'Gérer les utilisateurs',
@@ -257,9 +245,7 @@ const fr: Translation = {
   NETWORK_SCAN: 'Scanner les réseaux WiFi',
   IDLE: 'Inactif',
   LOST: 'Perdu',
-  SCANNING: 'Scan en cours',
   SCAN_AGAIN: 'Rescanner',
-  NETWORK_SCANNER: 'Scan réseau',
   NETWORK_NO_WIFI: 'Pas de réseau WiFi trouvé',
   NETWORK_BLANK_BSSID: 'laisser vide pour utiliser uniquement le SSID',
   TX_POWER: 'Puissance Tx',
@@ -294,9 +280,6 @@ const fr: Translation = {
   ONCHANGE: 'Sur le changement',
   CONDITION: 'Condition',
   SCHEDULE_UPDATED: 'Programme mis à jour',
-  SCHEDULE_TIMER_1: 'au démarrage',
-  SCHEDULE_TIMER_2: 'toutes les minutes',
-  SCHEDULE_TIMER_3: 'toutes les heures',
   CUSTOM_ENTITIES: 'Entités personnalisées',
   ENTITIES_HELP_1: 'Récupérer les entités personnalisées du bus EMS',
   ENTITIES_UPDATED: 'Entités mises à jour',
@@ -312,9 +295,7 @@ const fr: Translation = {
   ACTIVELOW: 'Actif bas',
   UNCHANGED: 'Inchangé',
   ALWAYS: 'Toujours',
-  ACTIVITY: 'Activité',
   CONFIGURE: 'Configurer {0}',
-  SYSTEM_MEMORY: 'Mémoire système',
   APPLICATION_SETTINGS_1: 'Modifier les paramètres de l\'application EMS-ESP',
   SECURITY_1: 'Ajouter ou supprimer des utilisateurs',
   DOWNLOAD_UPLOAD_1: 'Télécharger et mettre à jour les paramètres et le firmware',
@@ -326,7 +307,6 @@ const fr: Translation = {
   RENAME: 'Renommer',
   ENABLE_MODBUS: 'Activer Modbus',
   VIEW_LOG: 'Voir le journal pour diagnostiquer les problèmes',
-  UPLOAD_DRAG: 'glisser-déposer un fichier ici ou cliquer pour en sélectionner un',
   SERVICES: 'Services',
   ALLVALUES: 'Toutes les valeurs',
   SPECIAL_FUNCTIONS: 'Fonctions spéciales',
@@ -352,10 +332,8 @@ const fr: Translation = {
   THIS_VERSION: 'Cette version',
   PLATFORM: 'Plateforme',
   RELEASE_TYPE: 'Type de version',
-  INTERNET_CONNECTION_REQUIRED: 'Connexion Internet requise pour la vérification automatique des versions et la mise à niveau',
   SWITCH_RELEASE_TYPE: 'Passer à la version {0}',
   FIRMWARE_VERSION_INFO: 'Informations sur la version du firmware',
-  NO_DATA: 'Aucune donnée',
   USER_PROFILE: 'Profil utilisateur',
   STORED_VERSIONS: 'Versions stockées',
   ONLINE_HELP: 'aide en ligne',
@@ -366,9 +344,14 @@ const fr: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email envoyé avec succès',
   SYSTEM_NAME: 'Nom du système',
   COMMANDS: 'Commandes',
-  COMMANDS_UPDATED: 'Commandes mises à jour',
   COMMANDS_HELP_1: 'Définir des commandes personnalisées pour la magistral EMS',
-  EXECUTE_COMMAND_SENT: 'Commande envoyée',
+  COMMAND_EXECUTED: 'Commande exécutée avec succès',
+  RUN: 'Exécuter une commande',
+  INTERNET_CONNECTION_CHECK: 'Vérification en ligne pour les versions disponibles',
+  UPLOAD_BACKUP_TEXT: 'Cliquez pour sélectionner ou faites glisser et déposez un fichier de sauvegarde (.json) ici',
+  UPLOAD_FIRMWARE_TEXT: 'Cliquez pour sélectionner ou faites glisser et déposez un fichier firmware .bin/.md5 ici',
+  UPLOAD_MD5_RECEIVED: 'Empreinte reçue, téléversez maintenant le fichier firmware .bin',
+  UPLOAD_MD5_MATCHED: 'MD5 concordant, installation du firmware...'
 };
 
 export default fr;

interface/src/i18n/it/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const it: Translation = {
   LANGUAGE: 'Lingua',
   RETRY: 'Riprovare',
-  LOADING: 'Caricamento',
   IS_REQUIRED: '{0} é richiesto',
   SIGN_IN: 'Connettersi',
   SIGN_OUT: 'Disconnettersi',
@@ -37,13 +36,11 @@ const it: Translation = {
   VALUE: '{{valore|Valore}}',
   DEVICES: 'Dispositivi',
   SENSORS: 'Sensori',
-  RUN_COMMAND: 'Esegui',
   CHANGE_VALUE: 'Cambia Valore',
   CANCEL: 'Annulla',
   REMOVE_ALL: 'Rimuovi tutto',
   APPLY_CHANGES: 'Applica Cambiamenti ({0})',
   UPDATE: 'Update',
-  EXECUTE: 'Execute',
   REMOVE: 'Elimina',
   PROBLEM_UPDATING: 'Problema aggiornamento',
   PROBLEM_LOADING: 'Problema caricamento',
@@ -52,8 +49,6 @@ const it: Translation = {
   SETTINGS: 'Settings',
   UPDATED_OF: '{0} Aggiornati',
   UPDATE_OF: 'Aggiorna {0}',
-  REMOVED_OF: '{0} Rimossi',
-  DELETION_OF: '{0} Cancellati',
   OFFSET: 'Offset',
   FACTOR: 'Fattore',
   FREQ: 'Frequenza',
@@ -66,17 +61,14 @@ const it: Translation = {
   TEMP_SENSORS: 'Sensori Temperatura',
   WRITE_CMD_SENT: 'Scrittura comando inviata',
   EMS_BUS_WARNING: 'EMS bus disconnesso. Se questo avvertimento persiste dopo alcuni secondi prego verificare impostazioni scheda',
-  EMS_BUS_SCANNING: 'Scansione dispositivi EMS ...',
   CONNECTED: 'Connesso',
   TX_ISSUES: 'Problema di Tx - prova una modalità differente',
   DISCONNECTED: 'Disconnesso',
-  EMS_SCAN: 'Sei sicuro di voler iniziare una scansione completa del bus EMS ?',
   DATA_TRAFFIC: 'Traffico dati',
   EMS_DEVICE: 'Dispositivo EMS ',
   SUCCESS: 'SUCCESSO',
   FAIL: 'FALLITO',
   QUALITY: 'QUALITÂ',
-  SCAN: 'Scansione',
   STATUS_NAMES: [
     'Telegrammi EMS Ricevuti (Rx)',
     'EMS Letti (Tx)',
@@ -127,7 +119,6 @@ const it: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Indice',
   ENABLE_PARASITE: 'Abilita potenza 1-wire parassita',
-  LOGGING: 'Registrazione',
   LOG_HEX: 'Registra telegrammi EMS in esadecimale',
   ENABLE_SYSLOG: 'Abilita Syslog',
   LOG_LEVEL: 'Livello registrazione',
@@ -172,7 +163,6 @@ const it: Translation = {
   CLOSE: 'Chiudere',
   USE: 'Usa',
   FACTORY_RESET: 'Impostazioni di fabbrica',
-  SYSTEM_FACTORY_TEXT: 'Il dispositivo è stato ripristinato alle impostazioni di fabbrica e ora verrà riavviato',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Sei sicuro di voler ripristinare il dispositivo alle impostazioni di fabbrica??',
   AVAILABLE_VERSION: 'Versioni disponibili',
   STABLE: 'Stabile',
@@ -188,8 +178,6 @@ const it: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings',
   DOWNLOAD_SETTINGS_TEXT2: 'Esporta tutti i valori',
   DOWNLOAD_SYSTEM_BACKUP: 'Backup sistema',
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)',
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here',
   ERROR: 'Errore Inaspettato, prego tenta ancora',
   TIME_SET: 'Imposta Ora',
   MANAGE_USERS: 'Gestione Utenti',
@@ -257,9 +245,7 @@ const it: Translation = {
   NETWORK_SCAN: 'Scansione reti WiFi',
   IDLE: 'Inattivo',
   LOST: 'Perso',
-  SCANNING: 'Scansione',
   SCAN_AGAIN: 'Scansiona ancora',
-  NETWORK_SCANNER: 'Scansione Rete',
   NETWORK_NO_WIFI: 'Nessuana rete WiFi trovata',
   NETWORK_BLANK_BSSID: 'lasciare vuoto per usare solo SSID',
   TX_POWER: 'Potenza Tx',
@@ -294,9 +280,6 @@ const it: Translation = {
   ONCHANGE: 'Sul cambiamento',
   CONDITION: 'Condizione',
   SCHEDULE_UPDATED: 'Calendario aggiornato',
-  SCHEDULE_TIMER_1: 'All avvio',
-  SCHEDULE_TIMER_2: 'Ogni minuto',
-  SCHEDULE_TIMER_3: 'Ogni ora',
   CUSTOM_ENTITIES: 'Entità personalizzate',
   ENTITIES_HELP_1: 'Recupera entità personalizzate dal BUS EMS',
   ENTITIES_UPDATED: 'Entità aggiornate',
@@ -312,9 +295,7 @@ const it: Translation = {
   ACTIVELOW: 'Active Low',
   UNCHANGED: 'Unchanged',
   ALWAYS: 'Always',
-  ACTIVITY: 'Activity',
   CONFIGURE: 'Configure {0}',
-  SYSTEM_MEMORY: 'System Memory',
   APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
   SECURITY_1: 'Add or remove users',
   DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
@@ -326,7 +307,6 @@ const it: Translation = {
   RENAME: 'Rename',
   ENABLE_MODBUS: 'Abilita Modbus',
   VIEW_LOG: 'Visualizza log per diagnosticare problemi',
-  UPLOAD_DRAG: 'trascina e rilascia un file qui o clicca per selezionare uno',
   SERVICES: 'Servizi',
   ALLVALUES: 'Tutti i valori',
   SPECIAL_FUNCTIONS: 'Funzioni speciali',
@@ -352,10 +332,8 @@ const it: Translation = {
   THIS_VERSION: 'Questa versione',
   PLATFORM: 'Piattaforma',
   RELEASE_TYPE: 'Tipo di rilascio',
-  INTERNET_CONNECTION_REQUIRED: 'Connessione internet richiesta per il controllo automatico delle versioni e l\'aggiornamento',
   SWITCH_RELEASE_TYPE: 'Cambia in {0} rilascio',
   FIRMWARE_VERSION_INFO: 'Informazioni sulla versione del firmware',
-  NO_DATA: 'Nessun dato',
   USER_PROFILE: 'Profilo utente',
   STORED_VERSIONS: 'Versioni memorizzate',
   ONLINE_HELP: 'aiuto online',
@@ -366,9 +344,14 @@ const it: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email inviata con successo',
   SYSTEM_NAME: 'Nome del sistema',
   COMMANDS: 'Comandi',
-  COMMANDS_UPDATED: 'Comandi aggiornati',
   COMMANDS_HELP_1: 'Definisci comandi personalizzati per la magistrali EMS',
-  EXECUTE_COMMAND_SENT: 'Comando inviato',
+  COMMAND_EXECUTED: 'Comando eseguito con successo',
+  RUN: 'Esegui comando',
+  INTERNET_CONNECTION_CHECK: 'Controllo online per le versioni disponibili',
+  UPLOAD_BACKUP_TEXT: 'Klik per selezionare o trascinare e rilasciare un file di backup (.json) qui',
+  UPLOAD_FIRMWARE_TEXT: 'Klik per selezionare o trascinare e rilasciare un file firmware .bin/.md5 qui',
+  UPLOAD_MD5_RECEIVED: 'Digest ricevuto, ora caricare il file firmware .bin',
+  UPLOAD_MD5_MATCHED: 'MD5 corrispondente, installazione firmware...'
 };
 
 export default it;

interface/src/i18n/nl/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const nl: Translation = {
   LANGUAGE: 'Taal',
   RETRY: 'Opnieuw proberen',
-  LOADING: 'Laden',
   IS_REQUIRED: '{0} is verplicht',
   SIGN_IN: 'Inloggen',
   SIGN_OUT: 'Uitloggen',
@@ -37,13 +36,11 @@ const nl: Translation = {
   VALUE: '{{waarde|Waarde}}',
   DEVICES: 'Apparaten',
   SENSORS: 'Sensoren',
-  RUN_COMMAND: 'Call commando',
   CHANGE_VALUE: 'Wijzig waarde',
   CANCEL: 'Annuleren',
   REMOVE_ALL: 'Verwijderen alles',
   APPLY_CHANGES: 'Aanpassen ({0})',
   UPDATE: 'Update',
-  EXECUTE: 'Uitvoeren',
   REMOVE: 'Verwijderen',
   PROBLEM_UPDATING: 'Probleem met updaten',
   PROBLEM_LOADING: 'Probleem met laden',
@@ -52,8 +49,6 @@ const nl: Translation = {
   SETTINGS: 'Instellingen',
   UPDATED_OF: '{0} Bijgewerkt',
   UPDATE_OF: '{0} Bijwerken',
-  REMOVED_OF: '{0} Verwijderd',
-  DELETION_OF: '{0} Verwijder',
   OFFSET: 'Offset',
   FACTOR: 'Factor',
   FREQ: 'Frequentie',
@@ -66,17 +61,14 @@ const nl: Translation = {
   TEMP_SENSORS: 'Temperatuur Sensoren',
   WRITE_CMD_SENT: 'Schrijf commando gestuurd',
   EMS_BUS_WARNING: 'EMS bus niet gevonden. Als deze waarschuwing blijft staan na een paar seconden loop dan de instellingen na en in het bijzonder het apparaat type profiel.',
-  EMS_BUS_SCANNING: 'Scannen naar EMS apparaten...',
   CONNECTED: 'Verbonden',
   TX_ISSUES: 'Tx bus probleem. Probeer een andere Tx verzendmodus',
   DISCONNECTED: 'Niet verbonden',
-  EMS_SCAN: 'Weet je zeker dat je een volledige EMS bus scan uit wilt voeren?',
   DATA_TRAFFIC: 'Dataverkeer',
   EMS_DEVICE: 'EMS Apparaat',
   SUCCESS: 'SUCCESS',
   FAIL: 'MISLUKT',
   QUALITY: 'KWALITEIT',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'EMS Telegrammen ontvangen (Rx)',
     'EMS Leesopdrachten (Tx)',
@@ -127,7 +119,6 @@ const nl: Translation = {
   ENUM_FORMAT: 'Enum formaat API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Activeer 1-wire parasitaire modus',
-  LOGGING: 'Logging',
   LOG_HEX: 'Log EMS telegrammen in hexadecimaal',
   ENABLE_SYSLOG: 'Activeer Syslog',
   LOG_LEVEL: 'Log Level',
@@ -172,7 +163,6 @@ const nl: Translation = {
   CLOSE: 'Sluiten',
   USE: 'Gebruik',
   FACTORY_RESET: 'Fabrieksinstellingen',
-  SYSTEM_FACTORY_TEXT: 'Gateway is gereset en start nu weer op met fabrieksinstellingen',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Weet je zeker dat je een reset naar fabrieksinstellingen uit wilt voeren?',
   AVAILABLE_VERSION: 'Nieuwste beschikbare versies',
   STABLE: 'Stable',
@@ -188,8 +178,6 @@ const nl: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Maak een back-up van uw configuratie en instellingen',
   DOWNLOAD_SETTINGS_TEXT2: 'Exporteer alle waarden',
   DOWNLOAD_SYSTEM_BACKUP: 'Systeem Backup',
-  UPLOAD_TEXT: 'Upload een nieuw firmwarebestand (.bin) of een back-upbestand (.json)',
-  UPLOAD_DROP_TEXT: 'Sleep en firmware .bin bestand hierheen of klik hier',
   ERROR: 'Onverwachte fout, probeer opnieuw',
   TIME_SET: 'Tijd ingesteld',
   MANAGE_USERS: 'Gebruikersbeheer',
@@ -257,9 +245,7 @@ const nl: Translation = {
   NETWORK_SCAN: 'Scan WiFi Netwerken',
   IDLE: 'Inactief',
   LOST: 'Verloren',
-  SCANNING: 'Scannen',
   SCAN_AGAIN: 'Opnieuw scannen',
-  NETWORK_SCANNER: 'Netwerk Scannen',
   NETWORK_NO_WIFI: 'Geen WiFi netwerken gevonden',
   NETWORK_BLANK_BSSID: 'laat leeg om alleen SSID te bebruiken',
   TX_POWER: 'Tx Vermogen',
@@ -294,9 +280,6 @@ const nl: Translation = {
   ONCHANGE: 'Op verandering',
   CONDITION: 'Voorwaarde',
   SCHEDULE_UPDATED: 'Schema bijgewerkt',
-  SCHEDULE_TIMER_1: 'bij het opstarten',
-  SCHEDULE_TIMER_2: 'elke minuut',
-  SCHEDULE_TIMER_3: 'elke huur',
   CUSTOM_ENTITIES: 'Eigen entiteiten',
   ENTITIES_HELP_1: 'Eigen entiteiten ophalen uit de EMS-bus',
   ENTITIES_UPDATED: 'Entiteiten bijgewerkt',
@@ -312,9 +295,7 @@ const nl: Translation = {
   ACTIVELOW: 'Actiev Laag',
   UNCHANGED: 'Ongewijzigd',
   ALWAYS: 'Altijd',
-  ACTIVITY: 'Activiteit',
   CONFIGURE: '{0} Configureren',
-  SYSTEM_MEMORY: 'System Geheugen',
   APPLICATION_SETTINGS_1: 'Applicatie-instellingen wijzigen',
   SECURITY_1: 'Gebruikers toevoegen of verwijderen',
   DOWNLOAD_UPLOAD_1: 'Download en upload instellingen en firmware',
@@ -326,7 +307,6 @@ const nl: Translation = {
   RENAME: 'Hernoemen',
   ENABLE_MODBUS: 'Activeer Modbus',
   VIEW_LOG: 'Log weergeven om problemen te diagnosticeren',
-  UPLOAD_DRAG: 'sleep hier een bestand en zet het neer of klik om er een te selecteren',
   SERVICES: 'Services',
   ALLVALUES: 'All waarden',
   SPECIAL_FUNCTIONS: 'Speciale functies',
@@ -352,10 +332,8 @@ const nl: Translation = {
   THIS_VERSION: 'Deze Versie',
   PLATFORM: 'Platform',
   RELEASE_TYPE: 'Release Typ',
-  INTERNET_CONNECTION_REQUIRED: 'Internetverbinding vereist voor automatische versiecontrole en -upgrade',
   SWITCH_RELEASE_TYPE: 'Switch naar {0} release',
   FIRMWARE_VERSION_INFO: 'Informatie over firmwareversie',
-  NO_DATA: 'Geen data',
   USER_PROFILE: 'Gebruikersprofiel',
   STORED_VERSIONS: 'Opgeslagen versies',
   ONLINE_HELP: 'online help',
@@ -366,9 +344,14 @@ const nl: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email verzonden succesvol',
   SYSTEM_NAME: 'Systeemnaam',
   COMMANDS: 'Commando\'s',
-  COMMANDS_UPDATED: 'Commando\'s bijgewerkt',
   COMMANDS_HELP_1: 'Definieer hergebruikbare benoemde commando\'s hieronder. Deze kunnen worden uitgevoerd vanuit de console, API/MQTT, of worden aangeroepen door de Scheduler',
-  EXECUTE_COMMAND_SENT: 'Commando verzonden',
+  COMMAND_EXECUTED: 'Commando uitgevoerd succesvol',
+  RUN: 'Commando uitvoeren',
+  INTERNET_CONNECTION_CHECK: 'Controleren op online beschikbare versies',
+  UPLOAD_BACKUP_TEXT: 'Klik voor selecteren of sleep en drop een back-upbestand (.json) hier',
+  UPLOAD_FIRMWARE_TEXT: 'Klik voor selecteren of sleep en drop een firmware .bin/.md5 bestand hier',
+  UPLOAD_MD5_RECEIVED: 'Digest ontvangen, upload nu het firmware .bin-bestand',
+  UPLOAD_MD5_MATCHED: 'MD5 komt overeen, firmware wordt geïnstalleerd...'
 };
 
 export default nl;

interface/src/i18n/no/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const no: Translation = {
   LANGUAGE: 'Språk',
   RETRY: 'Forsøk igjen',
-  LOADING: 'Laster',
   IS_REQUIRED: '{0} er nødvendig',
   SIGN_IN: 'Logg inn',
   SIGN_OUT: 'Logg ut',
@@ -37,13 +36,11 @@ const no: Translation = {
   VALUE: '{{verdi|Verdi}}',
   DEVICES: 'Enheter',
   SENSORS: 'Sensorer',
-  RUN_COMMAND: 'Kjør kommando',
   CHANGE_VALUE: 'Endre Verdi',
   CANCEL: 'Avbryt',
   REMOVE_ALL: 'Fjern alles',
   APPLY_CHANGES: 'Utfør endringer({0})',
   UPDATE: 'Oppdater',
-  EXECUTE: 'Utfør',
   REMOVE: 'Fjern',
   PROBLEM_UPDATING: 'Problem med oppdatering',
   PROBLEM_LOADING: 'Problem med opplasting',
@@ -52,8 +49,6 @@ const no: Translation = {
   SETTINGS: 'Innstillinger',
   UPDATED_OF: '{0} Oppdatert',
   UPDATE_OF: '{0} Oppdater',
-  REMOVED_OF: '{0} Slettet',
-  DELETION_OF: '{0} Sletting',
   OFFSET: 'Kompensering',
   FACTOR: 'Faktor',
   FREQ: 'Frekvens',
@@ -66,17 +61,14 @@ const no: Translation = {
   TEMP_SENSORS: 'Temperaturesensorer',
   WRITE_CMD_SENT: 'Skriv kommando sent',
   EMS_BUS_WARNING: 'EMS bussen koblet ned. Hvis denne advarselen fortsetter etter noen f¨sekunder sjekk instillinger og  prosessorkort',
-  EMS_BUS_SCANNING: 'Søker etter EMS enheter...',
   CONNECTED: 'Tilkoblet',
   TX_ISSUES: 'Tx problemer - prøv en annen Tx Modus',
   DISCONNECTED: 'Frakoblet',
-  EMS_SCAN: 'Er du sikker på du vil starte full søking av EMS bussen?',
   DATA_TRAFFIC: 'Data trafikk',
   EMS_DEVICE: 'EMS Enhet',
   SUCCESS: 'VELLYKKET',
   FAIL: 'MISLYKKET',
   QUALITY: 'KVALITET',
-  SCAN: 'Søk',
   STATUS_NAMES: [
     'EMS Telegrammer Mottatt (Rx)',
     'EMS Lest (Tx)',
@@ -127,7 +119,6 @@ const no: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Indeks',
   ENABLE_PARASITE: 'Aktiver 1-wire parasitt strømforsyning',
-  LOGGING: 'Logging',
   LOG_HEX: 'Logg EMS telegrammer i hexadesimal',
   ENABLE_SYSLOG: 'Aktiver Syslog',
   LOG_LEVEL: 'Log Level',
@@ -172,7 +163,6 @@ const no: Translation = {
   CLOSE: 'Steng',
   USE: 'Bruk',
   FACTORY_RESET: 'Sett tilbake til fabrikkinstilling',
-  SYSTEM_FACTORY_TEXT: 'Enhet har blitt satt tilbake til fabrikkinstilling og vil restarte',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Er du sikker på at du vil resette enheten til fabrikkinstillinger?',
   AVAILABLE_VERSION: 'Tilgjengelige versjoner',
   STABLE: 'Stabil',
@@ -188,8 +178,6 @@ const no: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Lag en sikkerhetskopi av dine konfigurasjon og innstillinger',
   DOWNLOAD_SETTINGS_TEXT2: 'Eksporter alle verdier',
   DOWNLOAD_SYSTEM_BACKUP: 'System Sikkerhetskopi',
-  UPLOAD_TEXT: 'Last opp en ny firmware fil (.bin) eller en sikkerhetskopi fil (.json)',
-  UPLOAD_DROP_TEXT: 'Dropp en firmware fil (.bin) eller klikk her',
   ERROR: 'Ukjent feil, prøv igjen',
   TIME_SET: 'Still in tid',
   MANAGE_USERS: 'Administrer Brukere',
@@ -257,9 +245,7 @@ const no: Translation = {
   NETWORK_SCAN: 'Søk etter trådløst nettverk',
   IDLE: 'Klar',
   LOST: 'Mistet',
-  SCANNING: 'Søker',
   SCAN_AGAIN: 'Søk igjen',
-  NETWORK_SCANNER: 'Nettverk Scanner',
   NETWORK_NO_WIFI: 'Ingen trådløse nett funnet',
   NETWORK_BLANK_BSSID: 'la feltet være blankt for å bruke kun SSID',
   TX_POWER: 'Tx Effekt',
@@ -294,9 +280,6 @@ const no: Translation = {
   ONCHANGE: 'På endring',
   CONDITION: 'Betingelse',
   SCHEDULE_UPDATED: 'Planlegger er oppdatert',
-  SCHEDULE_TIMER_1: 'ved oppstart',
-  SCHEDULE_TIMER_2: 'hvert minutt',
-  SCHEDULE_TIMER_3: 'hver time',
   CUSTOM_ENTITIES: 'Personlige entiteter',
   ENTITIES_HELP_1: 'Hent personlige entiteter fra EMS bussen',
   ENTITIES_UPDATED: 'Entiteter oppdatert',
@@ -312,9 +295,7 @@ const no: Translation = {
   ACTIVELOW: 'Active Low',
   UNCHANGED: 'Unchanged',
   ALWAYS: 'Always',
-  ACTIVITY: 'Aktivitet',
   CONFIGURE: 'Konfigurer {0}',
-  SYSTEM_MEMORY: 'System Memory',
   APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
   SECURITY_1: 'Add or remove users',
   DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
@@ -326,7 +307,6 @@ const no: Translation = {
   RENAME: 'Gi nytt navn',
   ENABLE_MODBUS: 'Aktiver Modbus',
   VIEW_LOG: 'Se logg for å diagnostisere problemer',
-  UPLOAD_DRAG: 'dra og slippe en fil her eller klikk for å velge en',
   SERVICES: 'Tjenester',
   ALLVALUES: 'Alle verdier',
   SPECIAL_FUNCTIONS: 'Spesielle funksjoner',
@@ -352,10 +332,8 @@ const no: Translation = {
   THIS_VERSION: 'Denne versjonen',
   PLATFORM: 'Plattform',
   RELEASE_TYPE: 'Utgivelses type',
-  INTERNET_CONNECTION_REQUIRED: 'Internettilkobling kreves for automatisk versjonskontroll og oppgradering',
   SWITCH_RELEASE_TYPE: 'Bytt til {0} utgivelse',
   FIRMWARE_VERSION_INFO: 'Informasjon om firmwareversjon',
-  NO_DATA: 'Ingen data',
   USER_PROFILE: 'Brukerprofil',
   STORED_VERSIONS: 'Lagret versjoner',
   ONLINE_HELP: 'online hjelp',
@@ -366,9 +344,14 @@ const no: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email sendt suksessfullt',
   SYSTEM_NAME: 'Systemnavn',
   COMMANDS: 'Kommandoer',
-  COMMANDS_UPDATED: 'Kommandoer oppdatert',
   COMMANDS_HELP_1: 'Definer egne kommandoer for EMS-Magistral',
-  EXECUTE_COMMAND_SENT: 'Kommando sendt',
+  COMMAND_EXECUTED: 'Kommando kjørt lykkes',
+  RUN: 'Kjør',
+  INTERNET_CONNECTION_CHECK: 'Kontrollerer online for tilgjengelige versjoner',
+  UPLOAD_BACKUP_TEXT: 'Klikk for å velge eller dra og slipp en sikkerhetskopi (.json) her',
+  UPLOAD_FIRMWARE_TEXT: 'Klikk for å velge eller dra og slipp en firmware .bin/.md5 her',
+  UPLOAD_MD5_RECEIVED: 'MD5 mottatt, last nå opp firmware .bin-filen',
+  UPLOAD_MD5_MATCHED: 'MD5 stemmer, firmware installeres...'
 };
 
 export default no;

interface/src/i18n/pl/index.ts

@@ -3,7 +3,6 @@ import type { BaseTranslation } from '../i18n-types';
 const pl: BaseTranslation = {
   LANGUAGE: 'Język',
   RETRY: 'Ponów',
-  LOADING: 'Ładowanie',
   IS_REQUIRED: 'Pole {0} nie może być puste!',
   SIGN_IN: 'Zaloguj się',
   SIGN_OUT: 'Wyloguj się',
@@ -37,13 +36,11 @@ const pl: BaseTranslation = {
   VALUE: '{{W|w|w}}artość',
   DEVICES: 'Urządzenia',
   SENSORS: 'Czujniki',
-  RUN_COMMAND: 'Wykonaj komendę',
   CHANGE_VALUE: 'Zmiana wartości',
   CANCEL: 'Anuluj',
   REMOVE_ALL: 'Usuń wszystko',
   APPLY_CHANGES: 'Zapisz zmiany ({0})',
   UPDATE: 'Zmień',
-  EXECUTE: 'Wykonaj',
   REMOVE: 'Usuń',
   PROBLEM_UPDATING: 'Problem z uaktualnieniem!',
   PROBLEM_LOADING: 'Problem z załadowaniem!',
@@ -52,8 +49,6 @@ const pl: BaseTranslation = {
   SETTINGS: '{{U|u|}}stawienia',
   UPDATED_OF: 'Zaktualizowano {0}.',
   UPDATE_OF: 'Aktualizacja {0}',
-  REMOVED_OF: 'Usunięto ustawienia {0}.',
-  DELETION_OF: 'Kasowanie {0}',
   OFFSET: 'Korekta ±',
   FACTOR: 'Mnożnik',
   FREQ: 'Częstotliwość',
@@ -66,17 +61,14 @@ const pl: BaseTranslation = {
   TEMP_SENSORS: 'Czujniki temperatury 1-Wire®',
   WRITE_CMD_SENT: 'Komenda zapisu została wysłana.',
   EMS_BUS_WARNING: 'Brak połączenia z magistralą EMS. Jeśli ten błąd występuje dłużej niż kilka sekund, sprawdź ustawienia oraz profil płytki interfejsu.',
-  EMS_BUS_SCANNING: 'Trwa skanowanie urządzeń na magistrali EMS...',
   CONNECTED: '{{połączono|połączenie|}}',
   TX_ISSUES: 'problem z zapisem na magistralę EMS, spróbuj wybrać inny "Tryb transmisji (Tx)"',
   DISCONNECTED: 'brak połączenia',
-  EMS_SCAN: 'Czy na pewno wykonać pełne skanowanie magistrali EMS?',
   DATA_TRAFFIC: 'Ruch Danych',
   EMS_DEVICE: 'Urządzenie EMS',
   SUCCESS: 'Udane',
   FAIL: 'Nieudane',
   QUALITY: 'Jakość',
-  SCAN: 'Skanuj',
   STATUS_NAMES: [
     'EMS, telegramy odebrane (Rx)',
     'EMS, wysłane telegramy "odczyt" (Tx)',
@@ -127,7 +119,6 @@ const pl: BaseTranslation = {
   ENUM_FORMAT: 'Wartości z listy w API/MQTT',
   INDEX: 'indeks',
   ENABLE_PARASITE: 'Aktywuj zasilanie 1-wire pasożytnicze',
-  LOGGING: 'Logowanie',
   LOG_HEX: 'Loguj telegramy EMS w systemie szesnastkowym (hex)',
   ENABLE_SYSLOG: 'Aktywuj SysLog',
   LOG_LEVEL: 'Poziom logowania',
@@ -172,7 +163,6 @@ const pl: BaseTranslation = {
   CLOSE: 'Zamknij',
   USE: 'Aby zaktualizować firmware skorzystaj z funkcji',
   FACTORY_RESET: 'Ustawienia fabryczne',
-  SYSTEM_FACTORY_TEXT: 'Interfejs EMS-ESP został przywrócony do ustawień fabrycznych i zostanie teraz ponownie uruchomiony.',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Na pewno chcesz przywrócić ustawienia fabryczne interfejsu EMS-ESP?',
   AVAILABLE_VERSION: 'Najnowsze dostępne wersje',
   STABLE: 'Stabilna',
@@ -188,8 +178,6 @@ const pl: BaseTranslation = {
   DOWNLOAD_SETTINGS_TEXT: 'Utwórz kopię swoich ustawień i konfiguracji',
   DOWNLOAD_SETTINGS_TEXT2: 'Eksportuj wszystkie wartości',
   DOWNLOAD_SYSTEM_BACKUP: 'Kopia zapasowa systemu',
-  UPLOAD_TEXT: 'Wgraj nowy plik firmware (.bin) lub kopię ustawień (.json)',
-  UPLOAD_DROP_TEXT: 'Upuść plik firmware .bin lub kliknij tutaj',
   ERROR: 'Nieoczekiwany błąd, spróbuj ponownie!',
   TIME_SET: 'Zegar został ustawiony.',
   MANAGE_USERS: 'Zarządzanie użytkownikami',
@@ -257,9 +245,7 @@ const pl: BaseTranslation = {
   NETWORK_SCAN: 'Skanowanie sieci WiFi',
   IDLE: 'bezczynna',
   LOST: 'zostało utracone.',
-  SCANNING: 'Skanuję',
   SCAN_AGAIN: 'Skanuj ponownie',
-  NETWORK_SCANNER: 'Skaner sieci WiFi',
   NETWORK_NO_WIFI: 'Brak sieci WiFi w zasięgu',
   NETWORK_BLANK_BSSID: 'pozostaw puste aby używać tylko SSID',
   TX_POWER: 'Moc nadawania',
@@ -294,9 +280,6 @@ const pl: BaseTranslation = {
   ONCHANGE: 'O zmianie',
   CONDITION: 'Stan',
   SCHEDULE_UPDATED: 'Harmonogram został uaktualniony.',
-  SCHEDULE_TIMER_1: 'przy starcie',
-  SCHEDULE_TIMER_2: 'co minutę',
-  SCHEDULE_TIMER_3: 'co godzinę',
   CUSTOM_ENTITIES: '{{N|n|}}iestandardowe{{|j|}} encj{{e|i|}}',
   ENTITIES_HELP_1: 'Zdefiniuj niestandardowe encje dla magistrali EMS',
   ENTITIES_UPDATED: 'Niestandardowe encje zostały uaktualnione.',
@@ -312,9 +295,7 @@ const pl: BaseTranslation = {
   ACTIVELOW: 'Wyzwalany stanem niskim',
   UNCHANGED: 'Zachowaj stan',
   ALWAYS: 'Zawsze',
-  ACTIVITY: 'Aktywność',
   CONFIGURE: 'Konfiguracja {0}',
-  SYSTEM_MEMORY: 'Pamięć systemowa',
   APPLICATION_SETTINGS_1: 'Modyfikacja ustawień aplikacji EMS-ESP',
   SECURITY_1: 'Dodawanie i usuwanie użytkowników',
   DOWNLOAD_UPLOAD_1: 'Pobieranie/wysyłanie ustawień i firmware',
@@ -326,7 +307,6 @@ const pl: BaseTranslation = {
   RENAME: 'Zmień nazwę',
   ENABLE_MODBUS: 'Aktywuj Modbus',
   VIEW_LOG: 'Zdiagnozuj problemy',
-  UPLOAD_DRAG: 'przeciągnij i upuść plik lub kliknij tutaj',
   SERVICES: 'Usługi',
   ALLVALUES: 'Wszystkie wartości',
   SPECIAL_FUNCTIONS: 'Specjalne funkcje',
@@ -352,10 +332,8 @@ const pl: BaseTranslation = {
   THIS_VERSION: 'Ta wersja',
   PLATFORM: 'Platforma',
   RELEASE_TYPE: 'Typ wydania',
-  INTERNET_CONNECTION_REQUIRED: 'Połączenie internetowe jest wymagane do automatycznej kontroli wersji i aktualizacji',
   SWITCH_RELEASE_TYPE: 'Zmień na {0} wydanie',
   FIRMWARE_VERSION_INFO: 'Informacje o wersji firmware',
-  NO_DATA: 'Brak danych',
   USER_PROFILE: 'Profil użytkownika',
   STORED_VERSIONS: 'Zapisane wersje',
   ONLINE_HELP: 'pomoc online',
@@ -366,9 +344,14 @@ const pl: BaseTranslation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email wysłany pomyślnie',
   SYSTEM_NAME: 'Nazwa systemu',
   COMMANDS: 'Komendy',
-  COMMANDS_UPDATED: 'Komendy zostały zaktualizowane',
   COMMANDS_HELP_1: 'Zdefiniuj niestandardowe komendy dla magistrali EMS',
-  EXECUTE_COMMAND_SENT: 'Komenda wysłana',
+  COMMAND_EXECUTED: 'Komenda wykonana pomyślnie',
+  RUN: 'Wykonaj',
+  INTERNET_CONNECTION_CHECK: 'Sprawdzanie online dla dostępnych wersji',
+  UPLOAD_BACKUP_TEXT: 'Kliknij, aby wybrać lub przeciągnij i upuść plik kopii zapasowej (.json) tutaj',
+  UPLOAD_FIRMWARE_TEXT: 'Kliknij, aby wybrać lub przeciągnij i upuść plik firmware .bin/.md5',
+  UPLOAD_MD5_RECEIVED: 'Suma MD5 odebrana, teraz wgraj plik firmware .bin',
+  UPLOAD_MD5_MATCHED: 'MD5 zgodne, instalowanie firmware...'
 };
 
 export default pl;

interface/src/i18n/sk/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const sk: Translation = {
   LANGUAGE: 'Jazyk',
   RETRY: 'Opakovať',
-  LOADING: 'Načítanie',
   IS_REQUIRED: '{0} je požadovaná',
   SIGN_IN: 'Prihlásiť sa',
   SIGN_OUT: 'Odhlásiť sa',
@@ -37,13 +36,11 @@ const sk: Translation = {
   VALUE: '{{hodnota|Hodnota}}',
   DEVICES: 'Zariadenia',
   SENSORS: 'Snímače',
-  RUN_COMMAND: 'Volať príkaz',
   CHANGE_VALUE: 'Zmena hodnoty',
   CANCEL: 'Zrušiť',
   REMOVE_ALL: 'Odstrániť všetko',
   APPLY_CHANGES: 'Aplikovať zmeny ({0})',
   UPDATE: 'Aktualizovať',
-  EXECUTE: 'Spustiť',
   REMOVE: 'Odstrániť',
   PROBLEM_UPDATING: 'Problém s aktualizáciou',
   PROBLEM_LOADING: 'Problém s načítaním',
@@ -52,8 +49,6 @@ const sk: Translation = {
   SETTINGS: 'Nastavenia',
   UPDATED_OF: '{0} aktualizovaných',
   UPDATE_OF: '{0} aktualizované',
-  REMOVED_OF: '{0} odstránených',
-  DELETION_OF: '{0} zmazaných',
   OFFSET: 'Ofset',
   FACTOR: 'Faktor',
   FREQ: 'Frekvencia',
@@ -66,17 +61,14 @@ const sk: Translation = {
   TEMP_SENSORS: 'Snímače teploty',
   WRITE_CMD_SENT: 'Príkaz zápisu bol odoslaný',
   EMS_BUS_WARNING: 'Zbernica EMS odpojená. Ak toto upozornenie pretrváva aj po niekoľkých sekundách, skontrolujte nastavenia a profil dosky',
-  EMS_BUS_SCANNING: 'Zisťovanie EMS zariadení...',
   CONNECTED: 'Pripojené',
   TX_ISSUES: 'Problémy s Tx – skontrolujte Tx režim',
   DISCONNECTED: 'Odpojené',
-  EMS_SCAN: 'Naozaj chcete spustiť úplnú kontrolu zariadenia zbernice EMS?',
   DATA_TRAFFIC: 'Dátová prevádzka',
   EMS_DEVICE: 'EMS zariadenie',
   SUCCESS: 'ÚSPEŠNÉ',
   FAIL: 'ZLYHANIE',
   QUALITY: 'KVALITA',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'EMS Telegramy prijaté (Rx)',
     'EMS Čítania (Tx)',
@@ -127,7 +119,6 @@ const sk: Translation = {
   ENUM_FORMAT: 'Enum formát API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Povoliť 1-wire parazitné napájanie DS18B20',
-  LOGGING: 'Logovanie',
   LOG_HEX: 'Záznam telegramov EMS v hexadecimálnej sústave',
   ENABLE_SYSLOG: 'Povoliť Syslog',
   LOG_LEVEL: 'Log úroveň',
@@ -172,7 +163,6 @@ const sk: Translation = {
   CLOSE: 'Zatvoriť',
   USE: 'Použiť',
   FACTORY_RESET: 'Továrenské nastavenia',
-  SYSTEM_FACTORY_TEXT: 'Zariadenie bolo obnovené z výroby a teraz sa reštartuje',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Naozaj chcete resetovať EMS-ESP na predvolené výrobné nastavenia?',
   AVAILABLE_VERSION: 'Najnovšie dostupné verzie',
   STABLE: 'Stabilná',
@@ -188,8 +178,6 @@ const sk: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Vytvorte zálohu svojej konfigurácie a nastavení',
   DOWNLOAD_SETTINGS_TEXT2: 'Exportovať všetky hodnoty',
   DOWNLOAD_SYSTEM_BACKUP: 'Systémová záloha',
-  UPLOAD_TEXT: 'Nahrajte nový súbor firmvéru (.bin) alebo súbor zálohy (.json)',
-  UPLOAD_DROP_TEXT: 'Presuňte súbor .bin firmvéru alebo kliknite sem',
   ERROR: 'Neočakávaná chyba, prosím skúste to znova',
   TIME_SET: 'Nastavený čas',
   MANAGE_USERS: 'Správa používateľov',
@@ -257,9 +245,7 @@ const sk: Translation = {
   NETWORK_SCAN: 'Scan WiFi siete',
   IDLE: 'Nečinné',
   LOST: 'Stratené',
-  SCANNING: 'Skenovanie',
   SCAN_AGAIN: 'Skenovať znova',
-  NETWORK_SCANNER: 'Sieťový skener',
   NETWORK_NO_WIFI: 'WiFi siete nenájdené',
   NETWORK_BLANK_BSSID: 'ponechajte prázdne, ak chcete používať iba SSID',
   TX_POWER: 'Tx výkon',
@@ -294,9 +280,6 @@ const sk: Translation = {
   ONCHANGE: 'Pri zmene',
   CONDITION: 'Podmienka',
   SCHEDULE_UPDATED: 'Plánovanie aktualizované',
-  SCHEDULE_TIMER_1: 'pri spustení',
-  SCHEDULE_TIMER_2: 'každú minútu',
-  SCHEDULE_TIMER_3: 'každú hodinu',
   CUSTOM_ENTITIES: 'Vlastné entity',
   ENTITIES_HELP_1: 'Získavanie vlastných entít zo zbernice EMS',
   ENTITIES_UPDATED: 'Aktualizované entity',
@@ -312,9 +295,7 @@ const sk: Translation = {
   ACTIVELOW: 'Aktívny Nízky',
   UNCHANGED: 'Nezmenené',
   ALWAYS: 'Vždy',
-  ACTIVITY: 'Aktivita',
   CONFIGURE: 'Konfigurácia {0}',
-  SYSTEM_MEMORY: 'Systémová pamäť',
   APPLICATION_SETTINGS_1: 'Zmeniť nastavenia aplikácie EMS-ESP',
   SECURITY_1: 'Pridať, alebo odstrániť používateľov',
   DOWNLOAD_UPLOAD_1: 'Stiahnuť a nahrať nastavenia a firmware',
@@ -326,7 +307,6 @@ const sk: Translation = {
   RENAME: 'Premenovať',
   ENABLE_MODBUS: 'Povoliť Modbus',
   VIEW_LOG: 'Zobrazte log na diagnostiku problémov',
-  UPLOAD_DRAG: 'presuňte sem súbor alebo ho kliknutím vyberte',
   SERVICES: 'Služby',
   ALLVALUES: 'Všetky hodnoty',
   SPECIAL_FUNCTIONS: 'Špeciálne funkcie',
@@ -352,10 +332,8 @@ const sk: Translation = {
   THIS_VERSION: 'Táto verzia',
   PLATFORM: 'Platforma',
   RELEASE_TYPE: 'Typ vydania',
-  INTERNET_CONNECTION_REQUIRED: 'Internetové pripojenie je potrebné pre automatickú kontrolu a aktualizáciu',
   SWITCH_RELEASE_TYPE: 'Prepnúť na {0} verziu',
   FIRMWARE_VERSION_INFO: 'Informácie o verzii firmware',
-  NO_DATA: 'Žiadne dáta',
   USER_PROFILE: 'Profil používateľa',
   STORED_VERSIONS: 'Uložené verzie',
   ONLINE_HELP: 'online pomoc',
@@ -366,9 +344,14 @@ const sk: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email bol úspešne odoslaný',
   SYSTEM_NAME: 'Názov systému',
   COMMANDS: 'Príkazy',
-  COMMANDS_UPDATED: 'Príkazy aktualizované',
   COMMANDS_HELP_1: 'Definujte vlastné príkazy pre magistrali EMS',
-  EXECUTE_COMMAND_SENT: 'Príkaz odoslaný',
+  COMMAND_EXECUTED: 'Príkaz vykonaný úspešne',
+  RUN: 'Volať príkaz',
+  INTERNET_CONNECTION_CHECK: 'Kontrola online pre dostupné verzie',
+  UPLOAD_BACKUP_TEXT: 'Kliknite, aby ste vybrali alebo presuňte a upustili súbor zálohy (.json) sem',
+  UPLOAD_FIRMWARE_TEXT: 'Kliknite, aby ste vybrali alebo presuňte a upustili súbor firmware .bin/.md5',
+  UPLOAD_MD5_RECEIVED: 'Suma MD5 prijatá, teraz nahrajte firmware .bin',
+  UPLOAD_MD5_MATCHED: 'MD5 súhlasí, firmvér sa inštaluje...'
 };
 
 export default sk;

interface/src/i18n/sv/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const sv: Translation = {
   LANGUAGE: 'Språk',
   RETRY: 'Försök igen',
-  LOADING: 'Laddar',
   IS_REQUIRED: '{0} Krävs',
   SIGN_IN: 'Logga in',
   SIGN_OUT: 'Logga ut',
@@ -37,13 +36,11 @@ const sv: Translation = {
   VALUE: '{{värde|Värde}}',
   DEVICES: 'Enheter',
   SENSORS: 'Sensorer',
-  RUN_COMMAND: 'Kör kommando',
   CHANGE_VALUE: 'Ändra värde',
   CANCEL: 'Avbryt',
   REMOVE_ALL: 'Ta bort allt',
   APPLY_CHANGES: 'Utför ändringar ({0})',
   UPDATE: 'Uppdatera',
-  EXECUTE: 'Utför',
   REMOVE: 'Ta bort',
   PROBLEM_UPDATING: 'Problem vid uppdatering',
   PROBLEM_LOADING: 'Problem vid hämtning',
@@ -52,8 +49,6 @@ const sv: Translation = {
   SETTINGS: 'Inställningar',
   UPDATED_OF: '{0} Uppdaterad',
   UPDATE_OF: '{0} Uppdatera',
-  REMOVED_OF: '{0} Raderad',
-  DELETION_OF: '{0} Radering',
   OFFSET: 'Offset',
   FACTOR: 'Faktor',
   FREQ: 'Frekvens',
@@ -66,17 +61,14 @@ const sv: Translation = {
   TEMP_SENSORS: 'Temperatursensorer',
   WRITE_CMD_SENT: 'Skrivkommandon skickade',
   EMS_BUS_WARNING: 'EMS-buss nedkopplad. Om denna varning kvarstår efter några sekunder, kontrollera inställningar och enhets-profil.',
-  EMS_BUS_SCANNING: 'Söker efter EMS-enheter...',
   CONNECTED: 'Ansluten',
   TX_ISSUES: 'Sändfel - Prova ett annat TX-läge',
   DISCONNECTED: 'Nedkopplad',
-  EMS_SCAN: 'Är du säker på att du vill starta en full genomsökning av EMS-bussen?',
   DATA_TRAFFIC: 'Datatrafik',
   EMS_DEVICE: 'EMS enhet',
   SUCCESS: 'Lyckades',
   FAIL: 'Misslyckades',
   QUALITY: 'Kvalitet',
-  SCAN: 'Sök',
   STATUS_NAMES: [
     'EMS-telegram (Rx)',
     'EMS-läsningar (Tx)',
@@ -127,7 +119,6 @@ const sv: Translation = {
   ENUM_FORMAT: 'Enum-format API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Aktivera 1-wire parasitström',
-  LOGGING: 'Loggning',
   LOG_HEX: 'Logga EMS-telegram i hexadecimalformat',
   ENABLE_SYSLOG: 'Aktivera Syslog',
   LOG_LEVEL: 'Loggnivå',
@@ -172,7 +163,6 @@ const sv: Translation = {
   CLOSE: 'Stäng',
   USE: 'Använd',
   FACTORY_RESET: 'Fabriksåterställning',
-  SYSTEM_FACTORY_TEXT: 'Enheten har blivit fabriksåterställd och startar nu om',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Är du säker på att du vill fabriksåterställa enheten?',
   AVAILABLE_VERSION: 'Senaste tillgängliga versioner',
   STABLE: 'Stabil',
@@ -188,8 +178,6 @@ const sv: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Skapa en säkerhetskopia av din konfiguration och inställningar',
   DOWNLOAD_SETTINGS_TEXT2: 'Exportera alla värden',
   DOWNLOAD_SYSTEM_BACKUP: 'System säkerhetskopia',
-  UPLOAD_TEXT: 'Ladda upp en ny firmwarefil (.bin) eller en säkerhetskopiafil (.json)',
-  UPLOAD_DROP_TEXT: 'Droppa en firmware .bin fil eller klicka här',
   ERROR: 'Okänt fel, var god försök igen',
   TIME_SET: 'Ställ in tid',
   MANAGE_USERS: 'Användare',
@@ -257,9 +245,7 @@ const sv: Translation = {
   NETWORK_SCAN: 'Sök efter WiFi-nätverk',
   IDLE: 'Vilande',
   LOST: 'Förlorad',
-  SCANNING: 'Söker',
   SCAN_AGAIN: 'Sök igen',
-  NETWORK_SCANNER: 'Hittade nätverk',
   NETWORK_NO_WIFI: 'Inga WiFi-nätverk hittades',
   NETWORK_BLANK_BSSID: 'lämna blankt för att bara använda SSID',
   TX_POWER: 'Tx effekt',
@@ -294,9 +280,6 @@ const sv: Translation = {
   ONCHANGE: 'Vid förändring',
   CONDITION: 'Villkor',
   SCHEDULE_UPDATED: 'Schema uppdaterat',
-  SCHEDULE_TIMER_1: 'vid uppstart',
-  SCHEDULE_TIMER_2: 'varje minut',
-  SCHEDULE_TIMER_3: 'varje timme',
   CUSTOM_ENTITIES: 'Anpassade entiteter',
   ENTITIES_HELP_1: 'Hämta anpassade entiteter från EMS bussen',
   ENTITIES_UPDATED: 'Entiteter uppdaterade',
@@ -312,9 +295,7 @@ const sv: Translation = {
   ACTIVELOW: 'Aktivt låg',
   UNCHANGED: 'Oändrad',
   ALWAYS: 'Alltid',
-  ACTIVITY: 'Aktivitet',
   CONFIGURE: 'Konfigurera {0}',
-  SYSTEM_MEMORY: 'Systemminne',
   APPLICATION_SETTINGS_1: 'Ändra EMS-ESP Applikationsinställningar',
   SECURITY_1: 'Lägg till eller ta bort användare',
   DOWNLOAD_UPLOAD_1: 'Ladda ner eller ladda upp inställningar och firmware',
@@ -326,7 +307,6 @@ const sv: Translation = {
   RENAME: 'Byt namn',
   ENABLE_MODBUS: 'Aktivera Modbus',
   VIEW_LOG: 'Titta i loggen för att felsöka problem',
-  UPLOAD_DRAG: 'dra och släpp en fil här eller klicka för att välja en',
   SERVICES: 'Tjänster',
   ALLVALUES: 'Alla värden',
   SPECIAL_FUNCTIONS: 'Specialfunktioner',
@@ -352,10 +332,8 @@ const sv: Translation = {
   THIS_VERSION: 'Denna version',
   PLATFORM: 'Plattform',
   RELEASE_TYPE: 'Utgivelsestyp',
-  INTERNET_CONNECTION_REQUIRED: 'Internetanslutning krävs för automatisk version kontroll och uppdatering',
   SWITCH_RELEASE_TYPE: 'Byt till {0} utgåva',
   FIRMWARE_VERSION_INFO: 'Information om firmwareversion',
-  NO_DATA: 'Ingen data',
   USER_PROFILE: 'Användarprofil',
   STORED_VERSIONS: 'Lagrad versioner',
   ONLINE_HELP: 'online hjälp',
@@ -366,9 +344,14 @@ const sv: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email skickad lyckades',
   SYSTEM_NAME: 'Systemnamn',
   COMMANDS: 'Kommandon',
-  COMMANDS_UPDATED: 'Kommandon uppdaterade',
   COMMANDS_HELP_1: 'Definiera egna kommandon för EMS-Magistral',
-  EXECUTE_COMMAND_SENT: 'Kommando skickat',
+  COMMAND_EXECUTED: 'Kommando kört lyckades',
+  RUN: 'Kör kommando',
+  INTERNET_CONNECTION_CHECK: 'Kontrollerar online för tillgängliga versioner',
+  UPLOAD_BACKUP_TEXT: 'Klicka för att välja eller dra och släpp en säkerhetskopia (.json) här',
+  UPLOAD_FIRMWARE_TEXT: 'Klicka för att välja eller dra och släpp en firmware .bin/.md5 här',
+  UPLOAD_MD5_RECEIVED: 'MD5 mottagen, ladda nu upp firmware .bin-filen',
+  UPLOAD_MD5_MATCHED: 'MD5 stämmer, firmware installeras...'
 };
 
 export default sv;

interface/src/i18n/tr/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const tr: Translation = {
   LANGUAGE: 'Dil',
   RETRY: 'Tekrar Dene',
-  LOADING: 'Yükleniyor',
   IS_REQUIRED: '{0} gerekiyor',
   SIGN_IN: 'Giriş Yap',
   SIGN_OUT: 'Çıkış Yap',
@@ -37,13 +36,11 @@ const tr: Translation = {
   VALUE: '{{değer|Değer}}',
   DEVICES: 'Cihazlar',
   SENSORS: 'Sensörler',
-  RUN_COMMAND: 'Çalıştırma Komutu',
   CHANGE_VALUE: 'Değeri Değiştir',
   CANCEL: 'İptal',
   REMOVE_ALL: 'Tümünü Kaldır',
   APPLY_CHANGES: 'Değişiklikleri Uygula ({0})',
   UPDATE: 'Update',
-  EXECUTE: 'Uygulamak',
   REMOVE: 'Kaldır',
   PROBLEM_UPDATING: 'Güncelleme Sorunu',
   PROBLEM_LOADING: 'Yükleme Sorunu',
@@ -52,8 +49,6 @@ const tr: Translation = {
   SETTINGS: 'Ayarlar',
   UPDATED_OF: '{0} Güncellendi',
   UPDATE_OF: '{0} Güncelleme',
-  REMOVED_OF: '{0} Kaldırıldı',
-  DELETION_OF: '{0} Silindi',
   OFFSET: 'Fark',
   FACTOR: 'Etmen',
   FREQ: 'Frekans',
@@ -66,17 +61,14 @@ const tr: Translation = {
   TEMP_SENSORS: 'Sıcaklık Sensörleri',
   WRITE_CMD_SENT: 'Yazma komutu gönderildi',
   EMS_BUS_WARNING: 'EMS hat bağlantısı kesildi. Eğer bu uyarı birkaç saniye sonra devam ediyorsa lütfen ayarları ve kart tipini kontrol edin',
-  EMS_BUS_SCANNING: 'EMS cihazları aranıyor...',
   CONNECTED: 'Bağlandı',
   TX_ISSUES: 'Tx sorunu - başka bir Tx Modu deneyin',
   DISCONNECTED: 'Bağlantı kesildi',
-  EMS_SCAN: 'EMS Hattında tam bir cihaz taraması başlatmak istediğinizden emin misiniz?',
   DATA_TRAFFIC: 'Veri trafiği',
   EMS_DEVICE: 'EMS Cihazı',
   SUCCESS: 'BAŞARILI',
   FAIL: 'HATA',
   QUALITY: 'KALİTE',
-  SCAN: 'Tara',
   STATUS_NAMES: [
     'EMS Telegramlar Alındı (Rx)',
     'EMS Okuması (Tx)',
@@ -127,7 +119,6 @@ const tr: Translation = {
   ENUM_FORMAT: 'Enum Biçimleme API/MQTT',
   INDEX: 'İndeks',
   ENABLE_PARASITE: '1-wire parazit gücü devreye al',
-  LOGGING: 'Kayıt ediliyor',
   LOG_HEX: 'EMS telegramlarını hexadecimal olarak kayıt et',
   ENABLE_SYSLOG: 'Sistem Kaydını Devreye Al',
   LOG_LEVEL: 'Kayıt Seviyesi',
@@ -172,7 +163,6 @@ const tr: Translation = {
   CLOSE: 'Kapat',
   USE: 'KUllan',
   FACTORY_RESET: 'Fabrika ayarına dönme',
-  SYSTEM_FACTORY_TEXT: 'Cihaz fabrika ayarlarına döndü ve şimdi yendiden başlatılacak',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Cihazı fabrika ayarlarına döndürmek istediğinize emin misiniz?',
   AVAILABLE_VERSION: 'En son kullanılabilir sürümler',
   STABLE: 'Kararlı',
@@ -188,8 +178,6 @@ const tr: Translation = {
   DOWNLOAD_SETTINGS_TEXT: 'Yapılandırma ve ayarlarınızın yedekleme yapın',
   DOWNLOAD_SETTINGS_TEXT2: 'Tüm değerleri dışarı al',
   DOWNLOAD_SYSTEM_BACKUP: 'Sistem yedekleme',
-  UPLOAD_TEXT: 'Yeni bir firmware dosyası (.bin) veya yedek dosyası (.json) yükle',
-  UPLOAD_DROP_TEXT: 'Bir firmware .bin dosyası veya buraya tıklayın',
   ERROR: 'Beklenemedik hata, lütfen tekrar deneyin.',
   TIME_SET: 'Zaman ayarı',
   MANAGE_USERS: 'Kullanıcıları yönet',
@@ -257,9 +245,7 @@ const tr: Translation = {
   NETWORK_SCAN: 'Kablosuz Ağları Tara',
   IDLE: 'Serbest',
   LOST: 'Kayıp',
-  SCANNING: 'Tarıyor',
   SCAN_AGAIN: 'Tekrar tara',
-  NETWORK_SCANNER: 'Ağ Tarayıcısı',
   NETWORK_NO_WIFI: 'Hiçbir Kablosuz Ağ bulunamadı',
   NETWORK_BLANK_BSSID: 'sadece SSID kullanmak için boş bırakın',
   TX_POWER: 'Aktarım gücü',
@@ -294,9 +280,6 @@ const tr: Translation = {
   ONCHANGE: 'Değişimde',
   CONDITION: 'Durum',
   SCHEDULE_UPDATED: 'Zamanlama güncellendi',
-  SCHEDULE_TIMER_1: 'Başlangıçta',
-  SCHEDULE_TIMER_2: 'her dakikada',
-  SCHEDULE_TIMER_3: 'her saatte',
   CUSTOM_ENTITIES: 'Özel Varlıklar',
   ENTITIES_HELP_1: 'Özel varlıkları EMS hattından alın',
   ENTITIES_UPDATED: 'Varlıklar güncellendi',
@@ -312,9 +295,7 @@ const tr: Translation = {
   ACTIVELOW: 'Aktif Düşük',
   UNCHANGED: 'Değiştirilmedi',
   ALWAYS: 'Her zaman',
-  ACTIVITY: 'Faaliyet',
   CONFIGURE: 'Yapılandır {0}',
-  SYSTEM_MEMORY: 'Sistem Belleği',
   APPLICATION_SETTINGS_1: 'EMS-ESP Uygulama Ayarlarını Değiştir',
   SECURITY_1: 'Kullanıcıları ekle veya kaldır',
   DOWNLOAD_UPLOAD_1: 'Ayarları ve firmware dosyasını indir ve yükle',
@@ -326,7 +307,6 @@ const tr: Translation = {
   RENAME: 'Yeniden Adlandır',
   ENABLE_MODBUS: 'Modbus\'ı etkinleştir',
   VIEW_LOG: 'Sorunu tanımlamak için günlüğü görüntüleyin',
-  UPLOAD_DRAG: 'Bir dosya buraya sürükleyip bırakın veya seçmek için tıklayın',
   SERVICES: 'Hizmetler',
   ALLVALUES: 'Tüm Değerler',
   SPECIAL_FUNCTIONS: 'Özel Fonksiyonlar',
@@ -352,10 +332,8 @@ const tr: Translation = {
   THIS_VERSION: 'Bu Sürüm',
   PLATFORM: 'Platforma',
   RELEASE_TYPE: 'Sürüm Tipi',
-  INTERNET_CONNECTION_REQUIRED: 'Otomatik sürüm kontrolü ve güncelleme için internet bağlantısı gereklidir',
   SWITCH_RELEASE_TYPE: '{0} sürümüne geç',
   FIRMWARE_VERSION_INFO: 'Firmware Sürüm Bilgisi',
-  NO_DATA: 'Hiçbir veri yok',
   USER_PROFILE: 'Kullanıcı Profili',
   STORED_VERSIONS: 'Kaydedilmiş Sürümler',
   ONLINE_HELP: 'online yardım',
@@ -366,9 +344,14 @@ const tr: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email başarıyla gönderildi',
   SYSTEM_NAME: 'Sistem Adı',
   COMMANDS: 'Komutlar',
-  COMMANDS_UPDATED: 'Komutlar güncellendi',
   COMMANDS_HELP_1: 'Özel komutları EMS hattına tanımlayın',
-  EXECUTE_COMMAND_SENT: 'Komut gönderildi',
+  COMMAND_EXECUTED: 'Komut başarıyla çalıştırıldı',
+  RUN: 'Komutu çalıştır',
+  INTERNET_CONNECTION_CHECK: 'Online bağlantısı kontrol ediliyor',
+  UPLOAD_BACKUP_TEXT: 'Yeni bir firmware dosyası (.bin) veya yedek dosyası (.json) yükle',
+  UPLOAD_FIRMWARE_TEXT: 'Bir firmware .bin dosyası veya buraya tıklayın',
+  UPLOAD_MD5_RECEIVED: 'Özet alındı, şimdi firmware .bin dosyasını yükleyin',
+  UPLOAD_MD5_MATCHED: 'MD5 eşleşti, firmware yükleniyor...'
 };
 
 export default tr;

interface/src/types/network.ts

@@ -54,6 +54,7 @@ export interface NetworkSettingsType {
   enableMDNS: boolean;
   enableCORS: boolean;
   CORSOrigin: string;
+  eth_10mbit: boolean;
   [key: string]: unknown;
 }
 

interface/src/types/versions.ts

@@ -1,6 +1,7 @@
 // Types for the `getVersions` action response coming from the device.
 // The device proxies the request to emsesp.org/versions.json. If the device
-// is offline the `stable` and `dev` fields are omitted.
+// is offline the `stable` and `dev` fields are omitted, but `system_name` is
+// always sent as it comes from the device itself.
 
 export interface VersionInfo {
   version: string;
@@ -20,4 +21,5 @@ export interface VersionsResponse {
   current: CurrentVersionInfo;
   stable?: RemoteVersionInfo;
   dev?: RemoteVersionInfo;
+  system_name?: string;
 }

interface/tsconfig.json

@@ -57,6 +57,7 @@
     "assumeChangesOnlyAffectDirectDependencies": true,
 
     // Path mapping for cleaner imports
+    "ignoreDeprecations": "6.0",
     "baseUrl": ".",
     "paths": {
       "@/*": ["src/*"],

interface/vite.config.ts

@@ -207,9 +207,6 @@ export default defineConfig(
   async ({ command, mode }: { command: string; mode: string }) => {
     if (command === 'serve') {
       console.log(`Preparing for standalone build with server, mode=${mode}`);
-      // Imported through a computed URL so the config bundler leaves it as a real
-      // runtime import: mock-api is a separate package with its own node_modules,
-      // and inlining it here would drag its dependencies into every build.
       const mockServerUrl = pathToFileURL(
         path.resolve(import.meta.dirname, '../mock-api/mockServer.js')
       ).href;
@@ -257,6 +254,9 @@ export default defineConfig(
           minify: 'terser' as const,
           terserOptions: createHostedTerserOptions(),
           rollupOptions: {
+            checks: {
+              pluginTimings: false
+            },
             treeshake: {
               moduleSideEffects: false
             },
@@ -292,6 +292,9 @@ export default defineConfig(
         minify: 'terser' as const,
         terserOptions: createProductionTerserOptions(),
         rollupOptions: {
+          checks: {
+            pluginTimings: false
+          },
           treeshake: {
             moduleSideEffects: false,
             propertyReadSideEffects: false as const,

lib_standalone/Arduino.cpp

@@ -29,6 +29,7 @@
 
 NativeConsole Serial;
 
+EspClass  ESP;
 ETHClass  ETH;
 WiFiClass WiFi;
 

lib_standalone/Arduino.h

@@ -34,6 +34,15 @@
 #include "WString.h"
 #include "Network.h"
 
+// stub of Arduino-ESP32's EspClass, holding only what is called outside of #ifndef EMSESP_STANDALONE
+class EspClass {
+  public:
+    size_t getPsramSize() {
+        return 0; // standalone has no PSRAM
+    }
+};
+
+extern EspClass  ESP;
 extern ETHClass  ETH;
 extern WiFiClass WiFi;
 

lib_standalone/ESP32React.h

@@ -22,11 +22,16 @@
 #define NTP_SETTINGS_FILE "/config/ntpSettings.json"
 #define EMSESP_SETTINGS_FILE "/config/emsespSettings.json"
 
+// AP provision modes, mirrors src/ESP32React/APSettingsService.h
+#define AP_MODE_DISCONNECTED 1
+#define AP_MODE_NEVER 2
+
 class DummySettings {
   public:
     // SYSTEM
     bool bandwidth20 = false;
     bool nosleep     = true;
+    bool eth_10mbit  = false;
 
     // MQTT
     uint16_t publish_time       = 10;
@@ -81,7 +86,7 @@ class DummySettings {
     String password  = "ems-esp";
 
     // AP
-    uint8_t provisionMode = 0;
+    uint8_t provisionMode = AP_MODE_DISCONNECTED; // always
 
     // NTP
     String  server          = "pool.ntp.org";

lib_standalone/ESP_SSLClient.h

@@ -64,9 +64,11 @@ class ESP_SSLClient : public Stream {
     }
     void flush() override {
     }
-
     void stop() {
     }
+    void setTimeout(uint32_t) {
+
+    }
 };
 
 #endif // ESP_SSLClient_h

lib_standalone/WiFiClient.h

@@ -39,7 +39,11 @@ class WiFiClient {
     }
     void stop() {
     }
-
+    void setTimeout(uint32_t){
+        
+    }
+    void setConnectionTimeout(uint32_t) {
+    }
     // ESP32 socket option passthrough (e.g. TCP_NODELAY)
     int setSocketOption(int, int, const void *, size_t) {
         return 0;

mock-api/mockServer.js

@@ -1,27 +1,11 @@
-// Mock server for development
-// Simulates file uploads and EventSource (SSE) for log messages
-import formidable from 'formidable';
-
-// Constants reused across requests
-const VALID_EXTENSIONS = new Set(['bin', 'json', 'md5']);
+// EMS-ESP standalone mode to simulate
+//  a REST server for file uploads
+//  an EventSource (Server-Sent Events) for log messages in EMS-ESP standalone mode
 const ONE_SECOND_MS = 1000;
-const TEN_PERCENT = 10;
 
 // padding function
 const pad = (number) => String(number).padStart(2, '0');
 
-// Simple throttle helper (time-based)
-const throttle = (fn, intervalMs) => {
-  let last = 0;
-  return (...args) => {
-    const now = Date.now();
-    if (now - last >= intervalMs) {
-      last = now;
-      fn(...args);
-    }
-  };
-};
-
 // Cached date formatter to avoid prototype pollution
 const formatDate = (date) => {
   const year = date.getUTCFullYear();
@@ -38,108 +22,115 @@ const formatDate = (date) => {
   return `${year}-${month}-${day} ${hours}:${minutes}:${seconds}.${milliseconds}`;
 };
 
+const MOCK_REST_ORIGIN = 'http://localhost:3080';
+const UPLOAD_SIMULATED_KB_PER_SEC = 256;
+const UPLOAD_SLICE_BYTES = 16 * 1024;
+
+const sleep = (ms) => new Promise((resolve) => setTimeout(resolve, ms));
+
+const readRequestThrottled = (req) =>
+  new Promise((resolve, reject) => {
+    const chunks = [];
+    let ended = false;
+    let settled = false;
+
+    const settle = (settler, value) => {
+      if (settled) {
+        return;
+      }
+      settled = true;
+      settler(value);
+    };
+
+    req.on('error', (error) => settle(reject, error));
+    req.on('end', () => {
+      ended = true;
+      void step();
+    });
+
+    const step = async () => {
+      if (settled) {
+        return;
+      }
+      try {
+        const chunk = req.read(UPLOAD_SLICE_BYTES);
+        if (chunk) {
+          chunks.push(chunk);
+          await sleep((chunk.length / (UPLOAD_SIMULATED_KB_PER_SEC * 1024)) * 1000);
+          void step();
+          return;
+        }
+        if (ended || req.readableEnded) {
+          settle(resolve, Buffer.concat(chunks));
+          return;
+        }
+        req.once('readable', () => {
+          void step();
+        });
+      } catch (error) {
+        settle(reject, error);
+      }
+    };
+
+    void step();
+  });
+
+const forwardThrottledUpload = async (req, res) => {
+  const startedAt = Date.now();
+  try {
+    const body = await readRequestThrottled(req);
+    console.log(
+      `Upload received: ${body.length} bytes in ${((Date.now() - startedAt) / 1000).toFixed(1)}s`
+    );
+    const headers = {};
+    if (req.headers['content-type']) {
+      headers['content-type'] = req.headers['content-type'];
+    }
+    if (req.headers.authorization) {
+      headers.authorization = req.headers.authorization;
+    }
+    headers['content-length'] = String(body.length);
+
+    const bunRes = await fetch(`${MOCK_REST_ORIGIN}${req.url}`, {
+      method: 'POST',
+      headers,
+      body
+    });
+    const buf = Buffer.from(await bunRes.arrayBuffer());
+    res.statusCode = bunRes.status;
+    bunRes.headers.forEach((value, key) => {
+      if (key !== 'transfer-encoding' && key !== 'content-encoding') {
+        res.setHeader(key, value);
+      }
+    });
+    res.end(buf);
+  } catch (error) {
+    if (error?.code === 'ECONNRESET' || req.destroyed) {
+      console.log('Upload cancelled by the client');
+    } else {
+      console.error('Throttled upload proxy failed', error);
+    }
+    if (!res.headersSent) {
+      res.statusCode = 502;
+    }
+    if (!res.writableEnded) {
+      res.end();
+    }
+  }
+};
+
 export default () => {
   return {
-    name: 'vite:mockserver',
+    name: 'vite:mockServer',
     configureServer: async (server) => {
       server.middlewares.use(async (req, res, next) => {
-        // Handle file uploads
-        if (req.url.startsWith('/rest/uploadFile')) {
-          // CORS preflight support
-          if (req.method === 'OPTIONS') {
-            res.writeHead(204, {
-              'Access-Control-Allow-Origin': '*',
-              'Access-Control-Allow-Methods': 'POST, OPTIONS',
-              'Access-Control-Allow-Headers': 'Content-Type, Cache-Control',
-              'Access-Control-Max-Age': '600'
-            });
-            res.end();
-            return;
-          }
-
-          if (req.method !== 'POST') {
-            res.statusCode = 405;
-            res.setHeader('Allow', 'POST, OPTIONS');
-            res.end('Method Not Allowed');
-            return;
-          }
-
-          const fileSize = parseInt(req.headers['content-length'] || '0', 10);
-          let progress = 0;
-
-          // Track upload progress
-          const logThrottled = throttle((percentage) => {
-            console.log(`Upload progress: ${percentage}%`);
-          }, ONE_SECOND_MS);
-
-          req.on('data', (chunk) => {
-            progress += chunk.length;
-            if (fileSize > 0) {
-              const percentage = Math.round((progress / fileSize) * 100);
-              // Only log every ~1s and for meaningful changes (>=10%)
-              if (percentage % TEN_PERCENT === 0) {
-                logThrottled(percentage);
-              }
-            }
-          });
-
-          try {
-            const form = formidable({
-              maxFileSize: 50 * 1024 * 1024, // 50MB limit
-              keepExtensions: true,
-              multiples: false,
-              allowEmptyFiles: false
-            });
-
-            const [fields, files] = await form.parse(req);
-
-            if (Object.keys(files).length === 0) {
-              res.statusCode = 400;
-              res.end('No file uploaded');
-              return;
-            }
-
-            const uploadedFile = Array.isArray(files.file)
-              ? files.file[0]
-              : files.file;
-            const fileName = uploadedFile.originalFilename;
-            const fileExtension = fileName
-              .substring(fileName.lastIndexOf('.') + 1)
-              .toLowerCase();
-
-            console.log(
-              `File uploaded: ${fileName} (${fileExtension}, ${fileSize} bytes)`
-            );
-
-            // Validate file extension
-            if (!VALID_EXTENSIONS.has(fileExtension)) {
-              res.statusCode = 406;
-              res.end('Invalid file extension');
-              return;
-            }
-
-            // Handle different file types
-            if (fileExtension === 'md5') {
-              res.setHeader('Content-Type', 'application/json');
-              res.end(
-                JSON.stringify({
-                  md5: 'ef4304fc4d9025a58dcf25d71c882d2c'
-                })
-              );
-            } else {
-              console.log('File uploaded successfully!');
-              res.end();
-            }
-          } catch (err) {
-            console.error('Upload error:', err && err.message ? err.message : err);
-            res.statusCode = err.httpCode || 400;
-            res.setHeader('Content-Type', 'text/plain');
-            res.end(err && err.message ? err.message : 'Upload error');
-          }
+        if (req.url.startsWith('/rest/uploadFile') && req.method === 'POST') {
+          await forwardThrottledUpload(req, res);
+          return;
         }
 
         // Handle Server-Sent Events (SSE) for log streaming
-        else if (req.url.startsWith('/es/log')) {
+        if (req.url.startsWith('/es/log')) {
           // Set SSE headers
           res.writeHead(200, {
             Connection: 'keep-alive',
@@ -210,7 +201,7 @@ export default () => {
           res.on('error', cleanup);
           res.on('finish', cleanup);
         } else {
-          next(); // Continue to next middleware
+          next(); // Continue to next middleware (Vite proxy → restServer)
         }
       });
     }

mock-api/package.json

@@ -11,12 +11,11 @@
   },
   "dependencies": {
     "@msgpack/msgpack": "^3.1.3",
-    "formidable": "^3.5.4",
     "itty-router": "^5.0.24"
   },
   "devDependencies": {
     "@trivago/prettier-plugin-sort-imports": "^6.0.2",
     "prettier": "^3.9.6"
   },
-  "packageManager": "pnpm@11.20.0+sha512.9a6f330a95b66446ea088faf1521405a8a01f07fde7124cc9958dfed52d4bb436737e65b08f85f37b46fcba375092558ac51262b816844b22f63406ed166bfee"
+  "packageManager": "pnpm@12.3.4+sha512.961aa41fb077da3a04a441d9f8e15ebc0c96da8ef710b2eb67bf9ee7cb0610eabd48f1fd85f51cffe73846785fa0f87c56a3a872a1d893f8446741b5cce45457"
 }

mock-api/pnpm-lock.yaml

@@ -1,3 +1,104 @@
+---
+lockfileVersion: '9.0'
+
+importers:
+
+  .:
+    configDependencies: {}
+    packageManagerDependencies:
+      pnpm:
+        specifier: 12.3.4
+        version: 12.3.4
+
+packages:
+
+  '@pnpm/exe.darwin-arm64@12.3.4':
+    resolution: {integrity: sha512-PAyUol8T1+/+ViOiXAt51ECA+QnfXCqz6foL4bW+LsoX0NcVd5XVEM2mRQu+LV4oc7uRz9zf9U0P+XFfuQeDAw==}
+    cpu: [arm64]
+    os: [darwin]
+
+  '@pnpm/exe.darwin-x64@12.3.4':
+    resolution: {integrity: sha512-fxP9JCk0Cdye+ePuj+GJJLMUMTqHGWRdb1dtv4How876uQ2ehxvenpgiYAir/ceO9PsYUZkFTtyZdx+rRu5QOA==}
+    cpu: [x64]
+    os: [darwin]
+
+  '@pnpm/exe.linux-arm64-musl@12.3.4':
+    resolution: {integrity: sha512-FBOt0/7ye6O6q4AllVV5QMviB6qE6fqkeczV/+MDWQsmo+QJrlfsh6X7CpH/tClVpBZEyIbjpUoT8bNhCYBxEg==}
+    cpu: [arm64]
+    os: [linux]
+    libc: [musl]
+
+  '@pnpm/exe.linux-arm64@12.3.4':
+    resolution: {integrity: sha512-t71AVA7LRqiKTyZ5xMYaZc2n5DfdpMbfokZuiIOXHBOM03ECnF0t4iYwaBDqJgVjlKYUOwaF/bRQajGNA4cJ4w==}
+    cpu: [arm64]
+    os: [linux]
+    libc: [glibc]
+
+  '@pnpm/exe.linux-x64-musl@12.3.4':
+    resolution: {integrity: sha512-RPmk7Jb/aYaFvL2iyDN/AtMY+hUEsue732WmXpcuQ9tBpMnGyA5py7Z3+e+qmQaJ0zY/4ni9jJiyPBQHujmv6w==}
+    cpu: [x64]
+    os: [linux]
+    libc: [musl]
+
+  '@pnpm/exe.linux-x64@12.3.4':
+    resolution: {integrity: sha512-2ZqOlSPkfwX1h5cR+FPiWf8+F+2hZT/3TvhUK5sigHqwaQCIiq8R7CGxhndKs63JtcLi2a1Qpo+wX/EoyfjyJQ==}
+    cpu: [x64]
+    os: [linux]
+    libc: [glibc]
+
+  '@pnpm/exe.win32-arm64@12.3.4':
+    resolution: {integrity: sha512-ANyrHqyqco6SXBysUTRF74itDyyraea7IbFsKFdNXTjcFnfycTDx37EwuhdpPYFNSIh2JhUG4fByclsRfiHX7w==}
+    cpu: [arm64]
+    os: [win32]
+
+  '@pnpm/exe.win32-x64@12.3.4':
+    resolution: {integrity: sha512-WH/KqBPY/hq2Tb7SgQltEZytimcjgKRaCRL/aM9CI0c67iKc5TVmHUhIiL3Ux9FB4bWn36i6XewUcScQI+zG8w==}
+    cpu: [x64]
+    os: [win32]
+
+  pnpm@12.3.4:
+    resolution: {integrity: sha512-lhqkH7B32joEpEHZ+OFevAyW2o73ELLrZ7+e58sGEOq9SPH9hfUc/+c4RnhfoPh8VqOocqHYk/hEZ0G1zORUVw==}
+    engines: {node: '>=18.*'}
+    hasBin: true
+
+snapshots:
+
+  '@pnpm/exe.darwin-arm64@12.3.4':
+    optional: true
+
+  '@pnpm/exe.darwin-x64@12.3.4':
+    optional: true
+
+  '@pnpm/exe.linux-arm64-musl@12.3.4':
+    optional: true
+
+  '@pnpm/exe.linux-arm64@12.3.4':
+    optional: true
+
+  '@pnpm/exe.linux-x64-musl@12.3.4':
+    optional: true
+
+  '@pnpm/exe.linux-x64@12.3.4':
+    optional: true
+
+  '@pnpm/exe.win32-arm64@12.3.4':
+    optional: true
+
+  '@pnpm/exe.win32-x64@12.3.4':
+    optional: true
+
+  pnpm@12.3.4:
+    optionalDependencies:
+      '@pnpm/exe.darwin-arm64': 12.3.4
+      '@pnpm/exe.darwin-x64': 12.3.4
+      '@pnpm/exe.linux-arm64': 12.3.4
+      '@pnpm/exe.linux-arm64-musl': 12.3.4
+      '@pnpm/exe.linux-x64': 12.3.4
+      '@pnpm/exe.linux-x64-musl': 12.3.4
+      '@pnpm/exe.win32-arm64': 12.3.4
+      '@pnpm/exe.win32-x64': 12.3.4
+
+---
 lockfileVersion: '9.0'
 
 settings:
@@ -11,9 +112,6 @@ importers:
       '@msgpack/msgpack':
         specifier: ^3.1.3
         version: 3.1.3
-      formidable:
-        specifier: ^3.5.4
-        version: 3.5.4
       itty-router:
         specifier: ^5.0.24
         version: 5.0.24
@@ -71,8 +169,8 @@ packages:
     resolution: {integrity: sha512-bRISgCIjP20/tbWSPWMEi54QVPRZExkuD9lJL+UIxUKtwVJA8wW1Trb1jMs1RFXo1CBTNZ/5hpC9QvmKWdopKw==}
     engines: {node: '>=6.0.0'}
 
-  '@jridgewell/sourcemap-codec@1.5.5':
-    resolution: {integrity: sha512-cYQ9310grqxueWbl+WuIUIaiUaDcj7WOq5fVhEljNVgRfOUhY9fy2zTvfoqWsnebh8Sl70VScFbICvJnLKB0Og==}
+  '@jridgewell/sourcemap-codec@1.6.0':
+    resolution: {integrity: sha512-T7jf+5zgsZHwNJ4lvQ7/aezbyk0nNX+zJVWpmHA7VYsEx7a7qr5Rg5IbtJFqkgze5Y2sruq1RUY8Q837Od7iFw==}
 
   '@jridgewell/trace-mapping@0.3.31':
     resolution: {integrity: sha512-zzNR+SdQSDJzc8joaeP8QQoCQr8NuYx2dIIytl1QeBEZHJ9uW6hebsrYgbz8hJwUQao3TWCMtmfV8Nu1twOLAw==}
@@ -81,13 +179,6 @@ packages:
     resolution: {integrity: sha512-47XIizs9XZXvuJgoaJUIE2lFoID8ugvc0jzSHP+Ptfk8nTbnR8g788wv48N03Kx0UkAv559HWRQ3yzOgzlRNUA==}
     engines: {node: '>= 18'}
 
-  '@noble/hashes@1.8.0':
-    resolution: {integrity: sha512-jCs9ldd7NwzpgXDIf6P3+NrHh9/sD6CQdxHyjQI+h/6rDNo88ypBxxz45UDuZHz9r3tNz7N/VInSVoVdtXEI4A==}
-    engines: {node: ^14.21.3 || >=16}
-
-  '@paralleldrive/cuid2@2.3.1':
-    resolution: {integrity: sha512-XO7cAxhnTZl0Yggq6jOgjiOHhbgcO4NqFqwSmQpjK3b6TEE6Uj/jfSk6wzYyemh3+I0sHirKSetjQwn5cZktFw==}
-
   '@trivago/prettier-plugin-sort-imports@6.0.2':
     resolution: {integrity: sha512-3DgfkukFyC/sE/VuYjaUUWoFfuVjPK55vOFDsxD56XXynFMCZDYFogH2l/hDfOsQAm1myoU/1xByJ3tWqtulXA==}
     engines: {node: '>= 20'}
@@ -107,9 +198,6 @@ packages:
       svelte:
         optional: true
 
-  asap@2.0.6:
-    resolution: {integrity: sha512-BSHWgDSAiKs50o2Re8ppvp3seVHXSRM44cdSsT9FfNEUUZLOGWVCsiWaRPWM1Znn+mqZ1OfVZ3z3DWEzSp7hRA==}
-
   balanced-match@1.0.2:
     resolution: {integrity: sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==}
 
@@ -125,13 +213,6 @@ packages:
       supports-color:
         optional: true
 
-  dezalgo@1.0.4:
-    resolution: {integrity: sha512-rXSP0bf+5n0Qonsb+SVVfNfIsimO4HEtmnIpPHY8Q1UCzKlQrDMfdobr8nJOOsRgWCyMRqeSBQzmWUMq7zvVig==}
-
-  formidable@3.5.4:
-    resolution: {integrity: sha512-YikH+7CUTOtP44ZTnUhR7Ic2UASBPOqmaRkRKxRbywPTe5VxF7RRCck4af9wutiZ/QKM5nME9Bie2fFaPz5Gug==}
-    engines: {node: '>=14.0.0'}
-
   itty-router@5.0.24:
     resolution: {integrity: sha512-PXij1qGKtE6jg3dLgrTRdh/Frovl5Wc4Av67sD2xfhDPrgNt4u79++/il8/c/OfZGkhD/8uYJub8tjo+H165rA==}
 
@@ -156,9 +237,6 @@ packages:
   ms@2.1.3:
     resolution: {integrity: sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==}
 
-  once@1.4.0:
-    resolution: {integrity: sha512-lNaJgI+2Q5URQBkccEKHTQOPaXdUxnZZElQTZY0MFUAuaEqe1E+Nyvgdz/aIyNi6Z9MzO5dv1H8n58/GELp3+w==}
-
   parse-imports-exports@0.2.4:
     resolution: {integrity: sha512-4s6vd6dx1AotCx/RCI2m7t7GCh5bDRUtGNvRfHSP2wbBQdMi67pPe7mtzmgwcaQ8VKK/6IB7Glfyu3qdZJPybQ==}
 
@@ -173,9 +251,6 @@ packages:
     engines: {node: '>=14'}
     hasBin: true
 
-  wrappy@1.0.2:
-    resolution: {integrity: sha512-l4Sp/DRseor9wL6EvV2+TuQn63dMkPjZ/sp9XkghTEbV9KlPS1xUsZ3u7/IQO4wxtcFB4bgpQPRcR3QCvezPcQ==}
-
 snapshots:
 
   '@babel/code-frame@7.29.7':
@@ -227,26 +302,20 @@ snapshots:
 
   '@jridgewell/gen-mapping@0.3.13':
     dependencies:
-      '@jridgewell/sourcemap-codec': 1.5.5
+      '@jridgewell/sourcemap-codec': 1.6.0
       '@jridgewell/trace-mapping': 0.3.31
 
   '@jridgewell/resolve-uri@3.1.2': {}
 
-  '@jridgewell/sourcemap-codec@1.5.5': {}
+  '@jridgewell/sourcemap-codec@1.6.0': {}
 
   '@jridgewell/trace-mapping@0.3.31':
     dependencies:
       '@jridgewell/resolve-uri': 3.1.2
-      '@jridgewell/sourcemap-codec': 1.5.5
+      '@jridgewell/sourcemap-codec': 1.6.0
 
   '@msgpack/msgpack@3.1.3': {}
 
-  '@noble/hashes@1.8.0': {}
-
-  '@paralleldrive/cuid2@2.3.1':
-    dependencies:
-      '@noble/hashes': 1.8.0
-
   '@trivago/prettier-plugin-sort-imports@6.0.2(prettier@3.9.6)':
     dependencies:
       '@babel/generator': 7.29.8
@@ -261,8 +330,6 @@ snapshots:
     transitivePeerDependencies:
       - supports-color
 
-  asap@2.0.6: {}
-
   balanced-match@1.0.2: {}
 
   brace-expansion@2.1.4:
@@ -273,17 +340,6 @@ snapshots:
     dependencies:
       ms: 2.1.3
 
-  dezalgo@1.0.4:
-    dependencies:
-      asap: 2.0.6
-      wrappy: 1.0.2
-
-  formidable@3.5.4:
-    dependencies:
-      '@paralleldrive/cuid2': 2.3.1
-      dezalgo: 1.0.4
-      once: 1.4.0
-
   itty-router@5.0.24: {}
 
   javascript-natural-sort@0.7.1: {}
@@ -300,10 +356,6 @@ snapshots:
 
   ms@2.1.3: {}
 
-  once@1.4.0:
-    dependencies:
-      wrappy: 1.0.2
-
   parse-imports-exports@0.2.4:
     dependencies:
       parse-statements: 1.0.11
@@ -313,5 +365,3 @@ snapshots:
   picocolors@1.1.1: {}
 
   prettier@3.9.6: {}
-
-  wrappy@1.0.2: {}

mock-api/restServer.ts

@@ -65,7 +65,16 @@ let settings = {
   modbus_max_clients: 10,
   modbus_timeout: 10000,
   developer_mode: true,
-  disable_reset: false
+  disable_reset: false,
+  email_enabled: false,
+  email_security: 2,
+  email_server: 'smtp.gmail.com',
+  email_port: 587,
+  email_login: 'test@emsesp.org',
+  email_pass: 'password',
+  email_sender: 'test@emsesp.org',
+  email_recp: 'test@emsesp.org',
+  email_subject: 'ems-esp notification'
 };
 
 // EMS-ESP System Settings
@@ -86,9 +95,9 @@ let system_status = {
   // network_status: 10, // ethernet connected
   // network_status: 6, // wifi disconnected
   wifi_rssi: -41,
-  esp_platform: 'ESP32S3',
+  esp_platform: 'ESP32',
   build_flags: 'DEMO',
-  cpu_type: 'ESP32-S3',
+  cpu_type: 'ESP32',
   cpu_rev: 0,
   cpu_cores: 2,
   cpu_freq_mhz: 240,
@@ -193,8 +202,8 @@ system_status.partitions[0].version = THIS_VERSION; // app0
 
 // set the ESP platform - using ESP32 will disable OTA and automatic version downloading
 let emulate_esp: string;
-emulate_esp = 'ESP32S3';
-// emulate_esp = 'ESP32';
+// emulate_esp = 'ESP32S3';
+emulate_esp = 'ESP32';
 
 switch (emulate_esp) {
   // ESP32 4MB
@@ -230,6 +239,17 @@ switch (emulate_esp) {
 // GLOBAL VARIABLES
 let countWifiScanPoll = 0; // wifi network scan
 let countHardwarePoll = 0; // for during an upload
+let pendingFirmwareMd5 = false; // set by a .md5 upload, cleared by the next .bin
+
+const VALID_UPLOAD_EXTENSIONS = new Set(['bin', 'json', 'md5']);
+
+function parseMd5Digest(text: string): string | null {
+  const token = text.trim().split(/\s+/)[0];
+  if (/^[0-9a-fA-F]{32}$/.test(token)) {
+    return token.toLowerCase();
+  }
+  return null;
+}
 
 // DeviceTypes
 const enum ScheduleFlag {
@@ -425,16 +445,20 @@ function upgradeImportantMessages(version: string) {
   // 0 is do nothing
   // 1 means 3.9 and factory reset required
   // 2 means a major version upgrade
+
   let upgradeImportantMessageType_n = 0;
 
-  // see if its a filename with a .bin extension
-  if (version.endsWith('.bin')) {
-    upgradeImportantMessageType_n = 1; // make it 1, for testing, meaning factory reset required
-  } else if (version.endsWith('.md')) {
-    upgradeImportantMessageType_n = 0; // use default 0, no message
+  // check file extensions
+  if (version.endsWith('.md5') || version.endsWith('.json')) {
+    upgradeImportantMessageType_n = 0; // digest / backup restore: no upgrade warning
+  } else if (version.endsWith('.bin')) {
+    // extract the version number from the filename and if its going from 3.8.x to 3.9.x, then set upgradeImportantMessageType_n to 1
+    const versionNumber = version.split('.');
+    if (versionNumber[0] === '3' && versionNumber[1] === '8') {
+      upgradeImportantMessageType_n = 1; // make it 1, factory reset required
+    }
   } else {
     // this is a version string like "3.9.0"
-    // upgradeImportantMessageType_n = 2; // make it 2, for testing, meaning a major version upgrade
     upgradeImportantMessageType_n = 1; // make it 1, for testing, meaning a factory reset is required
   }
 
@@ -450,6 +474,8 @@ function upgradeImportantMessages(version: string) {
 // called by Action endpoint getVersions
 // Set MOCK_OFFLINE = true to simulate a device with no internet (omits stable/dev).
 const MOCK_OFFLINE = false;
+// const MOCK_OFFLINE = true;
+
 function get_versions() {
   const isDev = THIS_VERSION.includes('dev');
   const currentUpgradeable =
@@ -457,6 +483,7 @@ function get_versions() {
     (isDev ? DEV_VERSION_IS_UPGRADEABLE : STABLE_VERSION_IS_UPGRADEABLE);
 
   const data: {
+    system_name: string;
     current: {
       version: string;
       type: 'stable' | 'dev';
@@ -466,6 +493,7 @@ function get_versions() {
     stable?: { version: string; date: string; upgradeable: boolean };
     dev?: { version: string; date: string; upgradeable: boolean };
   } = {
+    system_name: settings.system_name,
     current: {
       version: THIS_VERSION,
       type: isDev ? 'dev' : 'stable',
@@ -569,6 +597,7 @@ let network_settings = {
   enableMDNS: true,
   enableCORS: false,
   CORSOrigin: '*',
+  eth_10mbit: false,
   local_ip: '',
   gateway_ip: '',
   subnet_mask: '',
@@ -760,6 +789,7 @@ const EMSESP_COMMANDS_ENDPOINT = REST_ENDPOINT_ROOT + 'commands';
 const EMSESP_CUSTOMENTITIES_ENDPOINT = REST_ENDPOINT_ROOT + 'customEntities';
 const EMSESP_MODULES_ENDPOINT = REST_ENDPOINT_ROOT + 'modules';
 const EMSESP_ACTION_ENDPOINT = REST_ENDPOINT_ROOT + 'action';
+const EMSESP_UPLOAD_FILE_ENDPOINT = REST_ENDPOINT_ROOT + 'uploadFile';
 
 // these are used in the API calls only
 const EMSESP_SYSTEM_INFO_ENDPOINT = API_ENDPOINT_ROOT + 'system/info';
@@ -4623,6 +4653,47 @@ router
 
 // SYSTEM and SETTINGS
 router
+  .post(EMSESP_UPLOAD_FILE_ENDPOINT, async (request: Request) => {
+    const formData = await request.formData();
+    const uploaded = formData.get('file');
+    if (!uploaded || typeof uploaded === 'string') {
+      return status(400);
+    }
+
+    const fileName = uploaded.name || '';
+    const fileExtension = fileName.includes('.')
+      ? fileName.substring(fileName.lastIndexOf('.') + 1).toLowerCase()
+      : '';
+    console.log(
+      `File uploaded: ${fileName} (${fileExtension}, ${uploaded.size} bytes)`
+    );
+
+    if (!VALID_UPLOAD_EXTENSIONS.has(fileExtension)) {
+      console.log('Invalid file extension');
+      return status(406);
+    }
+
+    if (fileExtension === 'md5') {
+      const digest = parseMd5Digest(await uploaded.text());
+      if (!digest) {
+        console.log('Invalid MD5 digest file');
+        return status(406);
+      }
+      pendingFirmwareMd5 = true;
+      console.log('MD5 digest received', digest);
+      return { md5: digest };
+    }
+
+    if (fileExtension === 'bin' && pendingFirmwareMd5) {
+      pendingFirmwareMd5 = false;
+      console.log('Firmware MD5 matches');
+      return { md5_ok: true };
+    }
+
+    pendingFirmwareMd5 = false;
+    console.log('File uploaded successfully!');
+    return status(200);
+  })
   .get(ACTIVITY_ENDPOINT, () => activity)
   .get(SYSTEM_STATUS_ENDPOINT, async () => {
     if (countHardwarePoll >= 2) {

platformio.ini

@@ -196,9 +196,10 @@ lib_ldf_mode = off
 lib_deps =
 
 ; unit tests
-;  The test code is in ./test/test_api.cpp and the test_api.h file is created by the native-test-create environment.
+;  The test code is in ./test/test_api.cpp and the test_api.h file is generated by the native-test-create environment.
 ;  to run use `platformio run -e native-test -t exec`. All tests should PASS.
 ;  tip: use https://jsondiff.com/ to compare the expected and actual responses.
+;  to update the test output run `python3 scripts/generate_test_api.py`
 [env:native-test]
 platform = native
 test_build_src = true

project-words.txt

@@ -744,7 +744,7 @@ mlongcalls
 mmio
 mmode
 mmplus
-mockserver
+mockServer
 modbus
 modee
 modetype
@@ -1343,4 +1343,10 @@ optimisations
 IILE
 Sumr
 eraseap
-roomtempoffset
+roomtempoffset
+dhcpc
+wifioff
+autonegotiation
+Mbit
+WROVER
+OLIMEXPOEW

scripts/generate_test_api.py

@@ -7,7 +7,7 @@ Workflow:
   3. Write that block to test/test_api/test_api.h.
   4. Run `pio run -e native-test -t exec`.
   
-run with `python3 scripts/generate_test_api.py`
+run with `python3 ./scripts/generate_test_api.py`
 """
 
 import subprocess

src/ESP32React/APSettingsService.cpp

@@ -31,7 +31,8 @@ StateUpdateResult APSettings::update(JsonObject root, APSettings & settings) {
     APSettings newSettings{};
     newSettings.provisionMode = static_cast<uint8_t>(root["provision_mode"] | FACTORY_AP_PROVISION_MODE);
 
-    switch (settings.provisionMode) {
+    // coerce removed/invalid modes (e.g. legacy AP_MODE_ALWAYS = 0) to the current default
+    switch (newSettings.provisionMode) {
     case AP_MODE_DISCONNECTED:
     case AP_MODE_NEVER:
         break;
@@ -53,11 +54,17 @@ StateUpdateResult APSettings::update(JsonObject root, APSettings & settings) {
         return StateUpdateResult::UNCHANGED;
     }
 
-    settings = newSettings;
+    const uint8_t previousProvisionMode = settings.provisionMode;
+    settings                            = newSettings;
 
-    // if the AP mode has changed, force a disconnect and reconnect
-    if (settings.provisionMode != newSettings.provisionMode) {
-        emsesp::EMSESP::network_.reconnect();
+    // FS load at boot uses this updater before Network::begin(); skip reconnect on that first apply.
+    // Subsequent provision-mode changes (UI/API) must reload Network's cached AP settings.
+    static bool appliedOnce = false;
+    const bool  modeChanged = previousProvisionMode != settings.provisionMode;
+    if (appliedOnce && modeChanged) {
+        emsesp::EMSESP::network_.schedule_reconnect();
     }
+    appliedOnce = true;
+
     return StateUpdateResult::CHANGED;
 }

src/ESP32React/APSettingsService.h

@@ -51,7 +51,7 @@ enum APNetworkStatus { ACTIVE = 0, INACTIVE };
 
 class APSettings {
   public:
-    uint8_t provisionMode = FACTORY_AP_PROVISION_MODE; // 0 = on, 2 = off
+    uint8_t provisionMode = FACTORY_AP_PROVISION_MODE; // 1 = on disconnect, 2 = off
     String  ssid          = FACTORY_AP_SSID;
     String  password      = FACTORY_AP_PASSWORD;
     uint8_t channel       = FACTORY_AP_CHANNEL;

src/ESP32React/MqttSettingsService.cpp

@@ -7,7 +7,7 @@ MqttSettingsService::MqttSettingsService(AsyncWebServer * server, FS * fs, Secur
     , _fsPersistence(MqttSettings::read, MqttSettings::update, this, fs, MQTT_SETTINGS_FILE)
     , _reconfigureMqtt(false)
     , _disconnectedAt(0)
-    , _disconnectReason(espMqttClientTypes::DisconnectReason::TCP_DISCONNECTED)
+    , _disconnectReason(espMqttClientTypes::DisconnectReason::USER_OK)
     , _mqttClient(nullptr) {
     addUpdateHandler([this] { onConfigUpdated(); }, false);
 }
@@ -41,6 +41,7 @@ void MqttSettingsService::startClient() {
         delete _mqttClient;
         _mqttClient = nullptr;
     }
+
     if (_state.enableTLS) {
         isSecure = true;
         if (emsesp::EMSESP::system_.PSram() == 0) {
@@ -82,7 +83,10 @@ void MqttSettingsService::loop() {
         _mqttClient->disconnect(true);
     }
     if (_reconfigureMqtt || (_disconnectedAt && static_cast<uint32_t>(uuid::get_uptime() - _disconnectedAt) >= MQTT_RECONNECTION_DELAY)) {
-        // reconfigure MQTT client
+        // configure MQTT client
+        if (_reconfigureMqtt && _state.enabled) {
+            emsesp::EMSESP::logger().info("Starting MQTT service");
+        }
         _disconnectedAt  = configureMqtt() ? 0 : uuid::get_uptime();
         _reconfigureMqtt = false;
     }
@@ -126,14 +130,18 @@ MqttClient * MqttSettingsService::getMqttClient() {
 void MqttSettingsService::onMqttConnect(bool sessionPresent) {
     (void)sessionPresent;
     emsesp::EMSESP::mqtt_.on_connect();
+    _disconnectReason = espMqttClientTypes::DisconnectReason::USER_OK;
 }
 
 void MqttSettingsService::onMqttDisconnect(espMqttClientTypes::DisconnectReason reason) {
-    _disconnectReason = reason;
+    if (reason != _disconnectReason) {
+        emsesp::EMSESP::mqtt_.on_disconnect(reason);
+        _disconnectReason = reason;
+    }
+
     if (!_disconnectedAt) {
         _disconnectedAt = uuid::get_uptime();
     }
-    emsesp::EMSESP::mqtt_.on_disconnect(reason);
 }
 
 void MqttSettingsService::onConfigUpdated() {
@@ -147,8 +155,13 @@ void MqttSettingsService::onConfigUpdated() {
 bool MqttSettingsService::configureMqtt() {
     // disconnect if already connected
     if (_mqttClient->connected()) {
-        // emsesp::EMSESP::logger().info("Disconnecting to configure");
+#if defined(EMSESP_DEBUG)
+        emsesp::EMSESP::logger().debug("Disconnecting to configure");
+#endif
         _mqttClient->disconnect(true);
+        if (!_state.enabled) {
+            emsesp::EMSESP::logger().info("Stopping MQTT client");
+        }
     }
 
     // only connect if WiFi is connected and MQTT is enabled
@@ -184,7 +197,7 @@ bool MqttSettingsService::configureMqtt() {
             static_cast<espMqttClientSecure *>(_mqttClient)->setKeepAlive(_state.keepAlive);
             static_cast<espMqttClientSecure *>(_mqttClient)->setCleanSession(_state.cleanSession);
             static_cast<espMqttClientSecure *>(_mqttClient)->setWill(will_topic, 1, true, "offline"); // QOS 1, retain
-            return _mqttClient->connect();
+            return (_mqttClient->connect());
         }
         static_cast<espMqttClient *>(_mqttClient)->setServer(_state.host.c_str(), _state.port);
         if (_state.username.length() > 0) {
@@ -194,7 +207,7 @@ bool MqttSettingsService::configureMqtt() {
         static_cast<espMqttClient *>(_mqttClient)->setKeepAlive(_state.keepAlive);
         static_cast<espMqttClient *>(_mqttClient)->setCleanSession(_state.cleanSession);
         static_cast<espMqttClient *>(_mqttClient)->setWill(will_topic, 1, true, "offline"); // QOS 1, retain
-        return _mqttClient->connect();
+        return (_mqttClient->connect());
     }
 
     return false;

src/ESP32React/NTPSettingsService.cpp

@@ -77,13 +77,15 @@ void NTPSettings::read(NTPSettings & settings, JsonObject root) {
     root["enabled"]         = settings.enabled;
     root["server"]          = settings.server;
     root["tz_label"]        = settings.tzLabel;
-    root["tz_format"]       = settings.tzFormat;
+    root["tz_format"]       = settings.tzFormat.substring(0, settings.tzFormat.indexOf(" "));
     root["thermostat_sync"] = settings.thermostat_sync;
     root["tz_label_t"]      = settings.tzLabelT;
-    root["tz_format_t"]     = settings.tzFormatT;
+    root["tz_format_t"]     = settings.tzFormatT.substring(0, settings.tzFormatT.indexOf(" "));
 }
 
 StateUpdateResult NTPSettings::update(JsonObject root, NTPSettings & settings) {
+    settings.tzFormat.reserve(40);
+    settings.tzFormatT.reserve(40);
     settings.enabled         = root["enabled"] | FACTORY_NTP_ENABLED;
     settings.server          = root["server"] | FACTORY_NTP_SERVER;
     settings.tzLabel         = root["tz_label"] | FACTORY_NTP_TIME_ZONE_LABEL;
@@ -91,5 +93,12 @@ StateUpdateResult NTPSettings::update(JsonObject root, NTPSettings & settings) {
     settings.thermostat_sync = root["thermostat_sync"] | FACTORY_NTP_THERMOSTAT_SYNC;
     settings.tzLabelT        = root["tz_label_t"] | FACTORY_NTP_TIME_ZONE_LABEL;
     settings.tzFormatT       = root["tz_format_t"] | FACTORY_NTP_TIME_ZONE_FORMAT;
+    // The format string must have same length to avoid memory leak, #3184
+    while (settings.tzFormat.length() < 40) {
+        settings.tzFormat += " ";
+    }
+    while (settings.tzFormatT.length() < 40) {
+        settings.tzFormatT += " ";
+    }
     return StateUpdateResult::CHANGED;
 }

src/ESP32React/NetworkSettingsService.cpp

@@ -24,6 +24,7 @@ void NetworkSettings::read(NetworkSettings & settings, JsonObject root) {
     root["enableCORS"]       = settings.enableCORS;
     root["CORSOrigin"]       = settings.CORSOrigin;
     root["tx_power"]         = settings.tx_power;
+    root["eth_10mbit"]       = settings.eth_10mbit;
 
     // extended settings
     JsonUtils::writeIP(root, "local_ip", settings.localIP);
@@ -51,6 +52,7 @@ StateUpdateResult NetworkSettings::update(JsonObject root, NetworkSettings & set
     settings.enableMDNS     = root["enableMDNS"] | true;
     settings.enableCORS     = root["enableCORS"];
     settings.CORSOrigin     = root["CORSOrigin"] | "*";
+    settings.eth_10mbit     = root["eth_10mbit"];
 
     // extended settings
     JsonUtils::readIP(root, "local_ip", settings.localIP);

src/ESP32React/NetworkSettingsService.h

@@ -39,6 +39,7 @@ class NetworkSettings {
     bool    enableMDNS     = true;
     bool    enableCORS     = false;
     String  CORSOrigin     = "*";
+    bool    eth_10mbit     = false; // force 10BASE-T half-duplex, no auto-negotiation
 
     // optional configuration for static IP address
     IPAddress localIP;

src/ESP32React/UploadFileService.cpp

@@ -13,10 +13,32 @@ static String getFilenameExtension(const String & filename) {
     return {};
 }
 
+// Accepts a raw 32-char hex digest, optionally with trailing newline or a GNU "hash  filename" suffix.
+static bool parseMd5Digest(const uint8_t * data, size_t len, std::array<char, 33> & out) {
+    size_t i = 0;
+    while (i < len && (data[i] == ' ' || data[i] == '\t' || data[i] == '\r' || data[i] == '\n')) {
+        ++i;
+    }
+    if (len - i < 32) {
+        return false;
+    }
+    for (size_t n = 0; n < 32; n++) {
+        const char c   = static_cast<char>(data[i + n]);
+        const bool hex = (c >= '0' && c <= '9') || (c >= 'a' && c <= 'f') || (c >= 'A' && c <= 'F');
+        if (!hex) {
+            return false;
+        }
+        out[n] = (c >= 'A' && c <= 'F') ? static_cast<char>(c - 'A' + 'a') : c;
+    }
+    out[32] = '\0';
+    return true;
+}
+
 UploadFileService::UploadFileService(AsyncWebServer * server, SecurityManager * securityManager)
     : _securityManager(securityManager)
     , _is_firmware(false)
     , _is_filesystem(false)
+    , _md5_applied(false)
     , _md5() {
     server->on(
         UPLOAD_FILE_PATH,
@@ -48,18 +70,23 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
             // LittleFS filesystem image
             _is_filesystem = true;
             _md5[0]        = '\0'; // clear any stale md5 so Update.end() doesn't compare against it
+            _md5_applied   = false;
         } else if ((extension == "bin") && (filesize > 1000000)) {
             _is_firmware = true;
         } else if (extension == "json") {
-            _md5[0] = '\0'; // clear md5
+            _md5[0]      = '\0'; // clear md5
+            _md5_applied = false;
         } else if (extension == "md5") {
-            if (len == _md5.size() - 1) {
-                std::memcpy(_md5.data(), data, _md5.size() - 1);
-                _md5.back() = '\0';
+            if (!parseMd5Digest(data, len, _md5)) {
+                emsesp::EMSESP::logger().err("Invalid MD5 digest file");
+                handleError(request, 406); // Not Acceptable
+            } else {
+                emsesp::EMSESP::logger().info("MD5 digest received (%s). Now upload the firmware BIN", _md5.data());
             }
             return;
         } else {
             _md5.front() = '\0';
+            _md5_applied = false;
             emsesp::EMSESP::logger().err("Unsupported file type: %s, size: %u", filename.c_str(), filesize);
             handleError(request, 406); // Not Acceptable - unsupported file type
             return;
@@ -94,15 +121,20 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
             }
 #endif
             // it's firmware - initialize the ArduinoOTA updater
-            emsesp::EMSESP::logger().info("Uploading firmware file %s (size: %d KB). Please wait...", filename.c_str(), filesize / 1024);
+            emsesp::EMSESP::logger().info("Firmware uploading (file %s, size: %dKB). Please wait...", filename.c_str(), filesize / 1024);
 
             // turn off UART to prevent interference with the upload
             emsesp::EMSuart::stop();
 
+            // tell main loop we're uploading so services as paused (e.g. MQTT)
+            emsesp::EMSESP::system_.systemStatus(emsesp::SYSTEM_STATUS::SYSTEM_STATUS_UPLOADING);
+
             if (Update.begin(filesize - sizeof(esp_image_header_t))) {
+                _md5_applied = false;
                 if (strlen(_md5.data()) == _md5.size() - 1) {
                     Update.setMD5(_md5.data());
-                    _md5.front() = '\0';
+                    _md5_applied = true;
+                    emsesp::EMSESP::logger().info("Firmware MD5 check enabled (%s)", _md5.data());
                 }
                 request->onDisconnect([this] { handleDisconnect(); }); // success, let's make sure we end the update if the client hangs up
             } else {
@@ -111,7 +143,7 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
             }
         } else if (_is_filesystem) {
             // LittleFS filesystem image - flash directly to the spiffs/littlefs partition
-            emsesp::EMSESP::logger().info("Uploading filesystem image %s (size: %u KB). Please wait...", filename.c_str(), static_cast<unsigned>(filesize / 1024));
+            emsesp::EMSESP::logger().info("Uploading filesystem file %s (size: %uKB). Please wait...", filename.c_str(), static_cast<unsigned>(filesize / 1024));
             emsesp::EMSuart::stop();
             LittleFS.end(); // unmount LittleFS before we overwrite the partition under it
 
@@ -180,8 +212,19 @@ void UploadFileService::uploadComplete(AsyncWebServerRequest * request) {
             emsesp::EMSESP::nvs_.putBool(emsesp::EMSESP_NVS_BOOT_NEW_FIRMWARE, true);
         }
 
-        AsyncWebServerResponse * response = request->beginResponse(200);
-        request->send(response);
+        if (_is_firmware && _md5_applied) {
+            emsesp::EMSESP::logger().info("Firmware MD5 matches");
+            auto *     response = new emsesp::PsramAsyncJsonResponse(false);
+            JsonObject root     = response->getRoot();
+            root["md5_ok"]      = true;
+            response->setLength();
+            request->send(response);
+            _md5.front() = '\0';
+            _md5_applied = false;
+        } else {
+            AsyncWebServerResponse * response = request->beginResponse(200);
+            request->send(response);
+        }
         emsesp::EMSESP::system_.systemStatus(
             emsesp::SYSTEM_STATUS::SYSTEM_STATUS_PENDING_RESTART); // will be handled by the main loop. We use pending for the Web's SystemMonitor
         return;

src/ESP32React/UploadFileService.h

@@ -23,6 +23,7 @@ class UploadFileService {
     SecurityManager *    _securityManager;
     bool                 _is_firmware;
     bool                 _is_filesystem;
+    bool                 _md5_applied; // true if an MD5 digest was applied to the current firmware upload
     std::array<char, 33> _md5;
 
     void handleUpload(AsyncWebServerRequest * request, const String & filename, size_t index, uint8_t * data, size_t len, bool final);

src/core/analogsensor.cpp

@@ -102,7 +102,7 @@ void AnalogSensor::start(const bool factory_settings) {
     Command::add(
         EMSdevice::DeviceType::ANALOGSENSOR,
         F_(setvalue),
-        [&](const char * value, const int8_t id, JsonObject) { return command_setvalue(value, id); },
+        [this](const char * value, const int8_t id, JsonObject) { return command_setvalue(value, id); },
         FL_(setiovalue_cmd),
         CommandFlag::ADMIN_ONLY);
 
@@ -111,6 +111,12 @@ void AnalogSensor::start(const bool factory_settings) {
     Mqtt::subscribe(EMSdevice::DeviceType::ANALOGSENSOR, topic, nullptr); // use empty function callback
 }
 
+void AnalogSensor::ha_reset() {
+    for (const auto & sensor : sensors_) {
+        remove_ha_topic(sensor.type(), sensor.gpio());
+    }
+}
+
 // load settings from the customization file, sorts them and initializes the GPIOs
 void AnalogSensor::reload(bool get_nvs) {
     exclude_types_.clear();
@@ -195,7 +201,7 @@ void AnalogSensor::reload(bool get_nvs) {
                 Command::add(
                     EMSdevice::DeviceType::ANALOGSENSOR,
                     sensor.name,
-                    [&](const char * value, const int8_t, JsonObject) { return command_setvalue(value, sensor.gpio); },
+                    [this, gpio = sensor.gpio](const char * value, const int8_t, JsonObject) { return command_setvalue(value, gpio); },
                     sensor.type == AnalogType::COUNTER || (sensor.type >= AnalogType::CNT_0 && sensor.type <= AnalogType::CNT_2) ? FL_(counter)
                     : sensor.type == AnalogType::DIGITAL_OUT                                                                     ? FL_(digital_out)
                     : sensor.type == AnalogType::RGB                                                                             ? FL_(RGB)
@@ -729,7 +735,7 @@ void AnalogSensor::publish_values(const bool force) {
             }
             // don't bother with value template conditions if using Domoticz which doesn't fully support MQTT Discovery
             if (Mqtt::discovery_type() == Mqtt::discoveryType::HOMEASSISTANT) {
-                config["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + "}}";
+                config["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + " else 'None'}}";
             } else {
                 config["val_tpl"] = (std::string) "{{" + val_obj + "}}";
             }

src/core/analogsensor.h

@@ -144,6 +144,7 @@ class AnalogSensor {
     void publish_values(const bool force);
     void reload(bool get_nvs = false);
     bool updated_values();
+    void ha_reset();
 
     // return back reference to the sensor list, used by other classes
     const std::vector<Sensor, AllocatorPSRAM<Sensor>> & sensors() const {

src/core/command.cpp

@@ -492,7 +492,7 @@ uint8_t Command::call(const uint8_t device_type, const char * command, const cha
 }
 
 // add a command to the list, which does not return json
-void Command::add(const uint8_t device_type, const uint8_t device_id, const char * cmd, const cmd_function_p cb, const char * const * description, uint8_t flags) {
+void Command::add(const uint8_t device_type, const uint8_t device_id, const char * cmd, const cmd_function_p & cb, const char * const * description, uint8_t flags) {
     // if the command already exists for that device type don't add it
     if (find_command(device_type, device_id, cmd, flags) != nullptr) {
         return;
@@ -508,13 +508,13 @@ void Command::add(const uint8_t device_type, const uint8_t device_id, const char
 
 // add a command with no json output
 // system/temperature/analog devices uses device_id 0
-void Command::add(const uint8_t device_type, const char * cmd, const cmd_function_p cb, const char * const * description, uint8_t flags) {
+void Command::add(const uint8_t device_type, const char * cmd, const cmd_function_p & cb, const char * const * description, uint8_t flags) {
     add(device_type, 0, cmd, cb, description, flags);
 }
 
 // add a command to the list, which does return a json object as output
 // these commands bypass the readonly check (they are actions, not entity setters)
-void Command::add_json(const uint8_t device_type, const char * cmd, const cmd_function_p cb, const char * const * description, uint8_t flags) {
+void Command::add_json(const uint8_t device_type, const char * cmd, const cmd_function_p & cb, const char * const * description, uint8_t flags) {
     // if the command already exists for that device type don't add it
     if (find_command(device_type, 0, cmd, flags) != nullptr) {
         return;
@@ -828,7 +828,7 @@ uint8_t Command::json_message(uint8_t error_code, const char * message, const Js
 // e.g. //one/two////three/// becomes /one/two/three
 std::string SUrlParser::path() {
     std::string s = "/"; // set up the beginning slash
-    for (const std::string & f : m_folders) {
+    for (const auto & f : m_folders) {
         s += f;
         s += "/";
     }

src/core/command.h

@@ -67,13 +67,13 @@ class Command {
         cmd_function_p       cmdfunction_;
         const char * const * description_;
 
-        CmdFunction(const uint8_t        device_type,
-                    const uint8_t        device_id,
-                    const uint8_t        flags,
-                    const bool           has_json_output,
-                    const char *         cmd,
-                    const cmd_function_p cmdfunction,
-                    const char * const * description)
+        CmdFunction(const uint8_t          device_type,
+                    const uint8_t          device_id,
+                    const uint8_t          flags,
+                    const bool             has_json_output,
+                    const char *           cmd,
+                    const cmd_function_p & cmdfunction,
+                    const char * const *   description)
             : device_type_(device_type)
             , device_id_(device_id)
             , flags_(flags)
@@ -105,22 +105,22 @@ class Command {
     static uint8_t call(const uint8_t device_type, const char * cmd, const char * value, const int8_t id = -1);
 
     // with normal call back function taking a value and id
-    static void add(const uint8_t        device_type,
-                    const uint8_t        device_id,
-                    const char *         cmd,
-                    const cmd_function_p cb,
-                    const char * const * description,
-                    uint8_t              flags = CommandFlag::CMD_FLAG_DEFAULT);
+    static void add(const uint8_t          device_type,
+                    const uint8_t          device_id,
+                    const char *           cmd,
+                    const cmd_function_p & cb,
+                    const char * const *   description,
+                    uint8_t                flags = CommandFlag::CMD_FLAG_DEFAULT);
 
     // same for system/temperature/analog devices
     static void
-    add(const uint8_t device_type, const char * cmd, const cmd_function_p cb, const char * const * description, uint8_t flags = CommandFlag::CMD_FLAG_DEFAULT);
+    add(const uint8_t device_type, const char * cmd, const cmd_function_p & cb, const char * const * description, uint8_t flags = CommandFlag::CMD_FLAG_DEFAULT);
     // command that writes a JSON object as its output; bypasses the readonly check
-    static void add_json(const uint8_t        device_type,
-                         const char *         cmd,
-                         const cmd_function_p cb,
-                         const char * const * description,
-                         uint8_t              flags = CommandFlag::CMD_FLAG_DEFAULT);
+    static void add_json(const uint8_t          device_type,
+                         const char *           cmd,
+                         const cmd_function_p & cb,
+                         const char * const *   description,
+                         uint8_t                flags = CommandFlag::CMD_FLAG_DEFAULT);
 
     static void reserve(size_t num) {
         cmdfunctions_.reserve(num);

src/core/console.cpp

@@ -199,10 +199,9 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
                               }
                           });
 
-    commands->add_command(ShellContext::MAIN,
-                          CommandFlags::ADMIN,
-                          string_vector{F_(wifi), F_(reconnect)},
-                          [](Shell &, const std::vector<std::string> &) { EMSESP::network_.reconnect(); });
+    commands->add_command(ShellContext::MAIN, CommandFlags::ADMIN, string_vector{F_(wifi), F_(reconnect)}, [](Shell &, const std::vector<std::string> &) {
+        EMSESP::network_.reconnect();
+    });
 
     //
     // SET commands
@@ -296,36 +295,35 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
                           });
 
 
-    commands->add_command(
-        ShellContext::MAIN,
-        CommandFlags::ADMIN,
-        string_vector{F_(set), F_(board_profile)},
-        {F_(name_mandatory)},
-        [](Shell & shell, const std::vector<std::string> & arguments) {
-            std::vector<int8_t> data; // led, dallas, rx, tx, button, phy_type, eth_power, eth_phy_addr, eth_clock_mode
-            std::string         board_profile = Helpers::toUpper(arguments.front());
-            if (!EMSESP::system_.load_board_profile(data, board_profile)) {
-                shell.println(
-                    "Invalid board profile (S32, E32, E32V2, E32V2_2, MH-ET, NODEMCU, LOLIN, OLIMEX, OLIMEXPOE, C3MINI, S2MINI, S3MINI, S32S3, CUSTOM)");
-                return;
-            }
+    commands->add_command(ShellContext::MAIN,
+                          CommandFlags::ADMIN,
+                          string_vector{F_(set), F_(board_profile)},
+                          {F_(name_mandatory)},
+                          [](Shell & shell, const std::vector<std::string> & arguments) {
+                              std::vector<int8_t> data; // led, dallas, rx, tx, button, phy_type, eth_power, eth_phy_addr, eth_clock_mode
+                              std::string         board_profile = Helpers::toUpper(arguments.front());
+                              if (!EMSESP::system_.load_board_profile(data, board_profile)) {
+                                  shell.println("Invalid board profile (S32, E32, E32V2, E32V2_2, MH-ET, NODEMCU, LOLIN, OLIMEX, OLIMEXPOE, OLIMEXPOEW, "
+                                                "C3MINI, S2MINI, S3MINI, S32S3, CUSTOM)");
+                                  return;
+                              }
 
-            EMSESP::webSettingsService.update([&](WebSettings & settings) {
-                settings.board_profile  = board_profile.c_str();
-                settings.led_gpio       = data[0];
-                settings.dallas_gpio    = data[1];
-                settings.rx_gpio        = data[2];
-                settings.tx_gpio        = data[3];
-                settings.pbutton_gpio   = data[4];
-                settings.phy_type       = data[5];
-                settings.eth_power      = data[6]; // can be -1
-                settings.eth_phy_addr   = data[7];
-                settings.eth_clock_mode = data[8];
-                return StateUpdateResult::CHANGED;
-            });
-            shell.printfln("Loaded board profile %s. Restarting...", board_profile.c_str());
-            EMSESP::system_.system_restart();
-        });
+                              EMSESP::webSettingsService.update([&](WebSettings & settings) {
+                                  settings.board_profile  = board_profile.c_str();
+                                  settings.led_gpio       = data[0];
+                                  settings.dallas_gpio    = data[1];
+                                  settings.rx_gpio        = data[2];
+                                  settings.tx_gpio        = data[3];
+                                  settings.pbutton_gpio   = data[4];
+                                  settings.phy_type       = data[5];
+                                  settings.eth_power      = data[6]; // can be -1
+                                  settings.eth_phy_addr   = data[7];
+                                  settings.eth_clock_mode = data[8];
+                                  return StateUpdateResult::CHANGED;
+                              });
+                              shell.printfln("Loaded board profile %s. Restarting...", board_profile.c_str());
+                              EMSESP::system_.system_restart();
+                          });
 
     commands->add_command(
         ShellContext::MAIN,
@@ -367,9 +365,7 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
     // EMS device commands
     //
 
-    commands->add_command(ShellContext::MAIN, CommandFlags::ADMIN, {F_(scan)}, [](Shell &, const std::vector<std::string> &) {
-        EMSESP::scan_devices();
-    });
+    commands->add_command(ShellContext::MAIN, CommandFlags::ADMIN, {F_(scan)}, [](Shell &, const std::vector<std::string> &) { EMSESP::scan_devices(); });
 
     /* removed scan deep
     commands->add_command(ShellContext::MAIN, CommandFlags::ADMIN, {F_(scan)}, {F_(deep_optional)}, [](Shell & shell, const std::vector<std::string> & arguments) {

src/core/emsdevice.cpp

@@ -52,7 +52,7 @@ bool EMSdevice::has_entities() const {
     }
     bool found = false;
     EMSESP::webCustomizationService.read([&](WebCustomization & settings) {
-        for (EntityCustomization entityCustomization : settings.entityCustomizations) {
+        for (const auto & entityCustomization : settings.entityCustomizations) {
             if (entityCustomization.device_id == device_id() && entityCustomization.entity_ids.size()) {
                 found = true;
                 break;
@@ -564,17 +564,17 @@ void EMSdevice::register_telegram_type(const uint16_t telegram_type_id, const ch
 
 // add to device value library, also know now as a "device entity"
 // this function will also apply any customizations to the entity
-void EMSdevice::add_device_value(int8_t                tag,              // to be used to group mqtt together, either as separate topics as a nested object
-                                 void *                value_p,          // pointer to the value from the .h file
-                                 uint8_t               type,             // one of DeviceValueType
-                                 const char * const ** options,          // options for enum, which are translated as a list of lists
-                                 const char * const *  options_single,   // list of names
-                                 int8_t                numeric_operator, // to divide or multiply, see DeviceValueNumOps::
-                                 const char * const *  name,             // list of names, including shortname and translations
-                                 uint8_t               uom,              // unit of measure from DeviceValueUOM
-                                 const cmd_function_p  f,                // command function pointer
-                                 int16_t               min,              // min allowed value
-                                 uint32_t              max               // max allowed value
+void EMSdevice::add_device_value(int8_t                 tag,              // to be used to group mqtt together, either as separate topics as a nested object
+                                 void *                 value_p,          // pointer to the value from the .h file
+                                 uint8_t                type,             // one of DeviceValueType
+                                 const char * const **  options,          // options for enum, which are translated as a list of lists
+                                 const char * const *   options_single,   // list of names
+                                 int8_t                 numeric_operator, // to divide or multiply, see DeviceValueNumOps::
+                                 const char * const *   name,             // list of names, including shortname and translations
+                                 uint8_t                uom,              // unit of measure from DeviceValueUOM
+                                 const cmd_function_p & f,                // command function pointer
+                                 int16_t                min,              // min allowed value
+                                 uint32_t               max               // max allowed value
 ) {
     uint8_t state           = DeviceValueState::DV_DEFAULT; // determine state
     auto    custom_fullname = std::string("");              // custom fullname
@@ -636,7 +636,7 @@ void EMSdevice::add_device_value(int8_t                tag,              // to b
 
     // scan through customizations to see if it's on the exclusion list by matching the productID and deviceID
     EMSESP::webCustomizationService.read([&](WebCustomization & settings) {
-        for (EntityCustomization entityCustomization : settings.entityCustomizations) {
+        for (const auto & entityCustomization : settings.entityCustomizations) {
             if ((entityCustomization.product_id == product_id()) && (entityCustomization.device_id == device_id())) {
                 char entity[70];
                 if (tag < DeviceValueTAG::TAG_HC1) {
@@ -645,7 +645,7 @@ void EMSdevice::add_device_value(int8_t                tag,              // to b
                     snprintf(entity, sizeof(entity), "%s/%s", tag_to_mqtt(tag), short_name);
                 }
 
-                for (const std::string & entity_id : entityCustomization.entity_ids) {
+                for (const auto & entity_id : entityCustomization.entity_ids) {
                     // if there is an appended custom name, strip it to get the true entity name
                     // and extract the new custom name
                     auto        custom_name_pos = entity_id.find('|');
@@ -700,93 +700,93 @@ void EMSdevice::erase_device_values() {
 }
 
 // single list of options
-void EMSdevice::register_device_value(int8_t               tag,
-                                      void *               value_p,
-                                      uint8_t              type,
-                                      const char * const * options_single,
-                                      const char * const * name,
-                                      uint8_t              uom,
-                                      const cmd_function_p f) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      const char * const *   options_single,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f) {
     // create a multi-list from the options
     add_device_value(tag, value_p, type, nullptr, options_single, 0, name, uom, f, 0, 0);
 };
 
 // single list of options, with no translations, with min and max
-void EMSdevice::register_device_value(int8_t               tag,
-                                      void *               value_p,
-                                      uint8_t              type,
-                                      const char * const * options_single,
-                                      const char * const * name,
-                                      uint8_t              uom,
-                                      const cmd_function_p f,
-                                      int16_t              min,
-                                      uint32_t             max) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      const char * const *   options_single,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f,
+                                      int16_t                min,
+                                      uint32_t               max) {
     // create a multi-list from the options
     add_device_value(tag, value_p, type, nullptr, options_single, 0, name, uom, f, min, max);
 };
 
-void EMSdevice::register_device_value(int8_t               tag,
-                                      void *               value_p,
-                                      uint8_t              type,
-                                      int8_t               numeric_operator,
-                                      const char * const * name,
-                                      uint8_t              uom,
-                                      const cmd_function_p f) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      int8_t                 numeric_operator,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f) {
     add_device_value(tag, value_p, type, nullptr, nullptr, numeric_operator, name, uom, f, 0, 0);
 }
 
-void EMSdevice::register_device_value(int8_t               tag,
-                                      void *               value_p,
-                                      uint8_t              type,
-                                      int8_t               numeric_operator,
-                                      const char * const * name,
-                                      uint8_t              uom,
-                                      const cmd_function_p f,
-                                      int16_t              min,
-                                      uint32_t             max) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      int8_t                 numeric_operator,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f,
+                                      int16_t                min,
+                                      uint32_t               max) {
     add_device_value(tag, value_p, type, nullptr, nullptr, numeric_operator, name, uom, f, min, max);
 }
 
 // no options, no function
-void EMSdevice::register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const * name, uint8_t uom, const cmd_function_p f) {
+void EMSdevice::register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const * name, uint8_t uom, const cmd_function_p & f) {
     add_device_value(tag, value_p, type, nullptr, nullptr, 0, name, uom, f, 0, 0);
 };
 
 // no options, with min/max
-void EMSdevice::register_device_value(int8_t               tag,
-                                      void *               value_p,
-                                      uint8_t              type,
-                                      const char * const * name,
-                                      uint8_t              uom,
-                                      const cmd_function_p f,
-                                      int16_t              min,
-                                      uint32_t             max) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f,
+                                      int16_t                min,
+                                      uint32_t               max) {
     add_device_value(tag, value_p, type, nullptr, nullptr, 0, name, uom, f, min, max);
 };
 
 // function with min and max values
 // adds a new command to the command list
 // in this function we separate out the short and long names and take any translations
-void EMSdevice::register_device_value(int8_t                tag,
-                                      void *                value_p,
-                                      uint8_t               type,
-                                      const char * const ** options,
-                                      const char * const *  name,
-                                      uint8_t               uom,
-                                      const cmd_function_p  f,
-                                      int16_t               min,
-                                      uint32_t              max) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      const char * const **  options,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f,
+                                      int16_t                min,
+                                      uint32_t               max) {
     add_device_value(tag, value_p, type, options, nullptr, 0, name, uom, f, min, max);
 }
 
 // function with no min and max values (set to 0)
-void EMSdevice::register_device_value(int8_t                tag,
-                                      void *                value_p,
-                                      uint8_t               type,
-                                      const char * const ** options,
-                                      const char * const *  name,
-                                      uint8_t               uom,
-                                      const cmd_function_p  f) {
+void EMSdevice::register_device_value(int8_t                 tag,
+                                      void *                 value_p,
+                                      uint8_t                type,
+                                      const char * const **  options,
+                                      const char * const *   name,
+                                      uint8_t                uom,
+                                      const cmd_function_p & f) {
     add_device_value(tag, value_p, type, options, nullptr, 0, name, uom, f, 0, 0);
 }
 
@@ -1210,10 +1210,10 @@ void EMSdevice::generate_values_web_customization(JsonArray output) {
     // this is when the mask has it's high bit (0x80) set
     // https://github.com/emsesp/EMS-ESP32/issues/891
     EMSESP::webCustomizationService.read([&](WebCustomization & settings) {
-        for (EntityCustomization entityCustomization : settings.entityCustomizations) {
+        for (const auto & entityCustomization : settings.entityCustomizations) {
             if (entityCustomization.device_id == device_id()) {
                 // entity_ids is a list of all entities with the mask prefixed in the string
-                for (const std::string & entity_id : entityCustomization.entity_ids) {
+                for (const auto & entity_id : entityCustomization.entity_ids) {
                     uint8_t mask = Helpers::hextoint(entity_id.substr(0, 2).c_str());
                     if (mask & 0x80) {
                         JsonObject obj = output.add<JsonObject>();

src/core/emsdevice.h

@@ -290,78 +290,79 @@ class EMSdevice {
     void generate_values_web(JsonObject output, const bool is_dashboard = false);
     void generate_values_web_customization(JsonArray output);
 
-    void add_device_value(int8_t                tag,
-                          void *                value_p,
-                          uint8_t               type,
-                          const char * const ** options,
-                          const char * const *  options_single,
-                          int8_t                numeric_operator,
-                          const char * const *  name,
-                          uint8_t               uom,
-                          const cmd_function_p  f,
-                          int16_t               min,
-                          uint32_t              max);
+    void add_device_value(int8_t                 tag,
+                          void *                 value_p,
+                          uint8_t                type,
+                          const char * const **  options,
+                          const char * const *   options_single,
+                          int8_t                 numeric_operator,
+                          const char * const *   name,
+                          uint8_t                uom,
+                          const cmd_function_p & f,
+                          int16_t                min,
+                          uint32_t               max);
 
-    void register_device_value(int8_t                tag,
-                               void *                value_p,
-                               uint8_t               type,
-                               const char * const ** options,
-                               const char * const *  name,
-                               uint8_t               uom,
-                               const cmd_function_p  f,
-                               int16_t               min,
-                               uint32_t              max);
+    void register_device_value(int8_t                 tag,
+                               void *                 value_p,
+                               uint8_t                type,
+                               const char * const **  options,
+                               const char * const *   name,
+                               uint8_t                uom,
+                               const cmd_function_p & f,
+                               int16_t                min,
+                               uint32_t               max);
 
     void erase_device_values();
 
     void
-    register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const ** options, const char * const * name, uint8_t uom, const cmd_function_p f);
+    register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const ** options, const char * const * name, uint8_t uom, const cmd_function_p & f);
 
     void register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const ** options, const char * const * name, uint8_t uom);
 
-    void register_device_value(int8_t               tag,
-                               void *               value_p,
-                               uint8_t              type,
-                               int8_t               numeric_operator,
-                               const char * const * name,
-                               uint8_t              uom,
-                               const cmd_function_p f = nullptr);
+    void register_device_value(int8_t                 tag,
+                               void *                 value_p,
+                               uint8_t                type,
+                               int8_t                 numeric_operator,
+                               const char * const *   name,
+                               uint8_t                uom,
+                               const cmd_function_p & f = nullptr);
 
-    void register_device_value(int8_t               tag,
-                               void *               value_p,
-                               uint8_t              type,
-                               int8_t               numeric_operator,
-                               const char * const * name,
-                               uint8_t              uom,
-                               const cmd_function_p f,
-                               int16_t              min,
-                               uint32_t             max);
+    void register_device_value(int8_t                 tag,
+                               void *                 value_p,
+                               uint8_t                type,
+                               int8_t                 numeric_operator,
+                               const char * const *   name,
+                               uint8_t                uom,
+                               const cmd_function_p & f,
+                               int16_t                min,
+                               uint32_t               max);
 
     // single list of options
-    void register_device_value(int8_t               tag,
-                               void *               value_p,
-                               uint8_t              type,
-                               const char * const * options_single,
-                               const char * const * name,
-                               uint8_t              uom,
-                               const cmd_function_p f = nullptr);
+    void register_device_value(int8_t                 tag,
+                               void *                 value_p,
+                               uint8_t                type,
+                               const char * const *   options_single,
+                               const char * const *   name,
+                               uint8_t                uom,
+                               const cmd_function_p & f = nullptr);
 
     // single list of options, with no translations, with min and max
-    void register_device_value(int8_t               tag,
-                               void *               value_p,
-                               uint8_t              type,
-                               const char * const * options_single,
-                               const char * const * name,
-                               uint8_t              uom,
-                               const cmd_function_p f,
-                               int16_t              min,
-                               uint32_t             max);
+    void register_device_value(int8_t                 tag,
+                               void *                 value_p,
+                               uint8_t                type,
+                               const char * const *   options_single,
+                               const char * const *   name,
+                               uint8_t                uom,
+                               const cmd_function_p & f,
+                               int16_t                min,
+                               uint32_t               max);
 
     // no options, optional function f
-    void register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const * name, uint8_t uom, const cmd_function_p f = nullptr);
+    void register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const * name, uint8_t uom, const cmd_function_p & f = nullptr);
 
     // no options, with min/max
-    void register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const * name, uint8_t uom, const cmd_function_p f, int16_t min, uint32_t max);
+    void
+    register_device_value(int8_t tag, void * value_p, uint8_t type, const char * const * name, uint8_t uom, const cmd_function_p & f, int16_t min, uint32_t max);
 
     void write_command(const uint16_t type_id, const uint8_t offset, uint8_t * message_data, const uint8_t message_length, const uint16_t validate_typeid) const;
     void write_command(const uint16_t type_id, const uint8_t offset, const uint8_t value, const uint16_t validate_typeid) const;

src/core/emsdevicevalue.h

@@ -192,6 +192,11 @@ class DeviceValue {
     int16_t  min; // min range
     uint32_t max; // max range
 
+    // optional custom name from customization. Allocated on heap only when actually set,
+    // so unnamed entities (the vast majority) don't pay for an inline std::string.
+    // Prefer custom_fullname() / set_custom_fullname() / has_custom_fullname() over direct access.
+    std::unique_ptr<std::string> custom_fullname_;
+
     DeviceValue(uint8_t               device_type,    // EMSdevice::DeviceType
                 int8_t                tag,            // DeviceValueTAG::*
                 void *                value_p,        // pointer to variable of any type
@@ -245,11 +250,6 @@ class DeviceValue {
     static const char * const * DeviceValueTAG_s[];
     static const char * const   DeviceValueTAG_mqtt[];
     static uint8_t              NUM_TAGS; // # tags
-
-  private:
-    // optional custom name from customization. Allocated on heap only when actually set,
-    // so unnamed entities (the vast majority) don't pay for an inline std::string.
-    std::unique_ptr<std::string> custom_fullname_;
 };
 
 }; // namespace emsesp

src/core/emsesp.cpp

@@ -54,19 +54,19 @@ bool     EMSESP::entity_compaction_pending_ = false;
 AsyncWebServer webServer(80);
 
 #if defined(EMSESP_STANDALONE)
-FS     dummyFS;
-auto & fsRef = dummyFS;
+FS         dummyFS;
+FS * const fsRef = &dummyFS;
 #else
-auto & fsRef = LittleFS;
+FS * const fsRef = &LittleFS;
 #endif
 
-ESP32React              EMSESP::esp32React(&webServer, &fsRef);
-WebSettingsService      EMSESP::webSettingsService      = WebSettingsService(&webServer, &fsRef, EMSESP::esp32React.getSecurityManager());
-WebCustomizationService EMSESP::webCustomizationService = WebCustomizationService(&webServer, &fsRef, EMSESP::esp32React.getSecurityManager());
-WebSchedulerService     EMSESP::webSchedulerService     = WebSchedulerService(&webServer, &fsRef, EMSESP::esp32React.getSecurityManager());
-WebCommandService       EMSESP::webCommandService       = WebCommandService(&webServer, &fsRef, EMSESP::esp32React.getSecurityManager());
-WebCustomEntityService  EMSESP::webCustomEntityService  = WebCustomEntityService(&webServer, &fsRef, EMSESP::esp32React.getSecurityManager());
-WebModulesService       EMSESP::webModulesService       = WebModulesService(&webServer, &fsRef, EMSESP::esp32React.getSecurityManager());
+ESP32React              EMSESP::esp32React(&webServer, fsRef);
+WebSettingsService      EMSESP::webSettingsService      = WebSettingsService(&webServer, fsRef, EMSESP::esp32React.getSecurityManager());
+WebCustomizationService EMSESP::webCustomizationService = WebCustomizationService(&webServer, fsRef, EMSESP::esp32React.getSecurityManager());
+WebSchedulerService     EMSESP::webSchedulerService     = WebSchedulerService(&webServer, fsRef, EMSESP::esp32React.getSecurityManager());
+WebCommandService       EMSESP::webCommandService       = WebCommandService(&webServer, fsRef, EMSESP::esp32React.getSecurityManager());
+WebCustomEntityService  EMSESP::webCustomEntityService  = WebCustomEntityService(&webServer, fsRef, EMSESP::esp32React.getSecurityManager());
+WebModulesService       EMSESP::webModulesService       = WebModulesService(&webServer, fsRef, EMSESP::esp32React.getSecurityManager());
 
 WebActivityService EMSESP::webActivityService = WebActivityService(&webServer, EMSESP::esp32React.getSecurityManager());
 WebStatusService   EMSESP::webStatusService   = WebStatusService(&webServer, EMSESP::esp32React.getSecurityManager());
@@ -184,13 +184,13 @@ void EMSESP::erase_device(const uint8_t type_id) {
     }
 }
 
- // clears list of recognized devices, entities and telegrams
- void EMSESP::clear_all_devices() {
-    for (auto & emsdevice : emsdevices) {
+// clears list of recognized devices, entities and telegrams
+void EMSESP::clear_all_devices() {
+    for (const auto & emsdevice : emsdevices) {
         emsdevice->erase_device_values();
     }
     emsdevices.clear();
- }
+}
 
 // called from EMSdevice/Command whenever an entity or telegram handler is registered.
 // Devices reserve their value/telegram vectors generously (to avoid realloc storms while
@@ -657,8 +657,8 @@ void EMSESP::reset_mqtt_ha() {
     }
 
     // force the re-creating of the temperature and analog sensor topics (for HA)
-    temperaturesensor_.reload();
-    analogsensor_.reload();
+    temperaturesensor_.ha_reset();
+    analogsensor_.ha_reset();
 
     // rebuild MQTT HA config topics for shower, custom entities and scheduler
     shower_.ha_reset();
@@ -1046,7 +1046,7 @@ void EMSESP::process_UBADevices(const std::shared_ptr<const Telegram> & telegram
                 }
             } else if (device_exists(device_id) && !device_hasEntities(device_id)) {
                 LOG_DEBUG("Remove EMS device with ID 0x%02X", device_id);
-                erase_device(device_id); // 
+                erase_device(device_id); //
             }
             next_byte = next_byte >> 1; // advance 1 bit
         }
@@ -1484,7 +1484,7 @@ bool EMSESP::add_device(const uint8_t device_id, const uint8_t product_id, const
 
     // see if we have a custom device name in our Customizations list, and if so set it
     webCustomizationService.read([&](WebCustomization const & settings) {
-        for (EntityCustomization e : settings.entityCustomizations) {
+        for (const auto & e : settings.entityCustomizations) {
             if ((e.device_id == device_id) && (e.product_id == product_id)) {
                 LOG_DEBUG("Have customizations for %s with deviceID 0x%02X productID %d", e.custom_name.c_str(), device_id, product_id);
                 emsdevices.back()->custom_name(e.custom_name);
@@ -1740,15 +1740,16 @@ void EMSESP::start() {
     bool factory_settings = false;
 #endif
 
-    // #if defined(EMSESP_DEBUG)
-    //     LOG_DEBUG("Listing root directory before:");
-    //     system_.listDir("/", 3); // show the contents of the root directory
-    // #endif
-
     // start NVS storage
-    if (!nvs_.begin("ems-esp", false, "nvs1")) { // try bigger nvs partition on 16M flash first
-        nvs_.begin("ems-esp", false, "nvs");     // fallback to small nvs
+#ifndef EMSESP_STANDALONE
+    if (esp_partition_find(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_NVS, "nvs1")) {
+        nvs_.begin("ems-esp", false, "nvs1");
+    } else {
+        nvs_.begin("ems-esp", false, "nvs"); // fallback to small nvs
     }
+#else
+        nvs_.begin("ems-esp", false, "nvs");
+#endif
 
     // set valid GPIOs list based on ESP32 chip/platform type
     system_.set_valid_system_gpios();
@@ -1759,11 +1760,6 @@ void EMSESP::start() {
     // loads core system services settings (mqtt, ap, ntp etc)
     esp32React.begin();
 
-    // #if defined(EMSESP_DEBUG)
-    //     LOG_DEBUG("Listing root directory after:");
-    //     system_.listDir("/", 3); // show the contents of the root directory
-    // #endif
-
 #ifndef EMSESP_STANDALONE
     if (factory_settings) {
         LOG_WARNING("No settings found on filesystem. Using factory settings.");
@@ -1893,7 +1889,7 @@ void EMSESP::shell_prompt() {
 void EMSESP::loop() {
     uuid::loop(); // store system uptime
 
-    // handle network
+    // handle network (Wifi, ETH and AP)
     network_.loop();
 
     // handles LED and checks system health, and syslog service
@@ -1901,14 +1897,13 @@ void EMSESP::loop() {
         return; // LED flashing is active meaning its about to reboot, skip the rest of the loop
     }
 
-    esp32React.loop();    // core services: Network, AP, MQTT and NTP
     webLogService.loop(); // log in Web UI
 
-    // run the loop, unless we're in the middle of an OTA upload
+    // run the main loop, unless we're in the middle of an OTA upload
     // if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_NORMAL || EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
     if (EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_PENDING_UPLOAD
         && EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_UPLOADING) {
-        // loop through the services
+        esp32React.loop();            // MQTT and NTP
         webStatusService.loop();      // periodic refresh of cached versions.json
         rxservice_.loop();            // process any incoming Rx telegrams
         shower_.loop();               // check for shower on/off
@@ -1921,6 +1916,7 @@ void EMSESP::loop() {
         scheduled_fetch_values();     // force a query on the EMS devices to fetch latest data at a set interval (1 min)
         compact_entities_if_stable(); // reclaim over-reserved entity vector capacity once device discovery settles
     }
+
     // check for GPIO Errors - this is called once when booting
     if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
         static bool only_once = false;

src/core/emsesp.h

@@ -101,7 +101,7 @@ class Module {}; // forward declaration
 
 // for Command Function callbacks (Command::cmd_function_p). The unified callback takes a JsonObject
 // output which entity/setter commands ignore.
-#define MAKE_CF_CB(__f) [&](const char * value, const int8_t id, JsonObject output) { return __f(value, id); }
+#define MAKE_CF_CB(__f) [this](const char * value, const int8_t id, JsonObject output) { return __f(value, id); }
 
 namespace emsesp {
 

src/core/httpClient.cpp

@@ -0,0 +1,152 @@
+/*
+ * EMS-ESP - https://github.com/emsesp/EMS-ESP
+ * Copyright 2020-2026  emsesp.org
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "emsesp.h"
+
+#include "httpClient.h"
+
+#include <WiFiClient.h>
+#include <ESP_SSLClient.h>
+
+namespace emsesp {
+
+int HttpClient::request(std::string url, const std::string & method, const std::string & value, JsonObjectConst headers, std::string & result) {
+    int        httpResult = 0;
+    const bool is_post    = value.length() || Helpers::toLower(method) == "post";
+    const auto lower_url  = Helpers::toLower(url.c_str());
+
+    const bool is_https = lower_url.starts_with("https://");
+    if (!is_https && !lower_url.starts_with("http://")) {
+        return 0; // unsupported scheme
+    }
+
+    WiFiClient *    basic_client = new WiFiClient;
+    ESP_SSLClient * ssl_client   = new ESP_SSLClient;
+    if (is_https) {
+        ssl_client->setInsecure();
+        // Notes: with root CA we should set here: ssl_client->setCACert(rootCACert);
+        // 1 KB RX buffer is fine for small JSON-style endpoints used by the scheduler/shunting-yard but it is NOT enough for servers that send full-size TLS records (>1 KB)
+        ssl_client->setBufferSizes(16384, 1024);
+        ssl_client->setSessionTimeout(120); // Set the timeout in seconds (>=120 seconds)
+    }
+    // WiFiClient is NetworkClient, which declares no setTimeout() of its own - calling it binds to
+    // Stream::setTimeout() and only affects readBytes(), leaving the socket on the core's 3s default
+    basic_client->setConnectionTimeout(CONNECT_TIMEOUT_MS);
+    ssl_client->setTimeout(5);                     // seconds, drives BearSSL only - unused on the plain HTTP path
+    ssl_client->setClient(basic_client, is_https); // enableSSL = false for plain HTTP
+
+    url.replace(0, is_https ? 8 : 7, "");
+    std::string host  = url;
+    auto        index = url.find_first_of('/');
+    if (index != std::string::npos) {
+        host = url.substr(0, index);
+        url.replace(0, index, "");
+    } else {
+        url = "/";
+    }
+
+    const uint16_t port = is_https ? 443 : 80;
+    if (ssl_client->connect(host.c_str(), port)) {
+        bool content_set = false;
+        bool agent_set   = false;
+
+        // assemble the request in one buffer. Sent as a dozen small writes it is left to Nagle to
+        // dribble them out an ACK at a time, which on a slow link can cost more than the read budget
+        std::string req = (is_post ? "POST " : "GET ") + url + " HTTP/1.1\r\nHost: " + host + "\r\n";
+        for (JsonPairConst p : headers) {
+            const auto key = Helpers::toLower(p.key().c_str());
+            content_set |= (key == "content-type");
+            agent_set |= (key == "user-agent");
+            req += std::string(p.key().c_str()) + ": " + p.value().as<std::string>() + "\r\n";
+        }
+        if (!agent_set) {
+            req += "User-Agent: EMS-ESP\r\n"; // CDNs are more likely to stall on a request without one
+        }
+        if (is_post) {
+            if (!content_set) {
+                req += "Content-Type: ";
+                req += value.starts_with('{') ? asyncsrv::T_application_json : asyncsrv::T_text_plain;
+                req += "\r\n";
+            }
+            req += "Content-Length: " + std::to_string(value.length()) + "\r\n";
+        }
+        req += "Connection: close\r\n\r\n"; // the blank line terminates the headers - without it the server never responds
+
+        ssl_client->print(req.c_str());
+        if (is_post && value.length()) {
+            ssl_client->print(value.c_str()); // sent separately so the body isn't copied into req
+        }
+
+        // available() drops to zero between TCP segments, so stopping at the first gap truncates
+        // any response that doesn't arrive in a single packet. Keep reading until the peer closes,
+        // the stream goes idle, or the overall budget runs out
+        const uint32_t started   = millis();
+        uint32_t       last_data = started;
+        while (millis() - started < TOTAL_TIMEOUT_MS) {
+            const int avail = ssl_client->available();
+            if (avail > 0) {
+                uint8_t      buf[128];
+                const size_t want = (avail < (int)sizeof(buf)) ? (size_t)avail : sizeof(buf);
+                const int    len  = ssl_client->read(buf, want);
+                if (len > 0) {
+                    result.append(reinterpret_cast<const char *>(buf), len);
+                    last_data = millis();
+                }
+                continue;
+            }
+            if (!ssl_client->connected()) {
+                break; // closed, with nothing left buffered
+            }
+            // the server may take a while to start replying
+            if (millis() - last_data > (result.empty() ? FIRST_BYTE_TIMEOUT_MS : IDLE_TIMEOUT_MS)) {
+                break;
+            }
+            delay(1);
+        }
+        ssl_client->stop();
+
+        const auto received = result.length();
+
+        // parse the status line "HTTP/1.x <code> <reason>". stoi() would abort rather than throw on
+        // a malformed response, since the firmware is built with -fno-exceptions
+        if (result.starts_with("HTTP/")) {
+            index = result.find_first_of(' ');
+            if (index != std::string::npos) {
+                httpResult = Helpers::atoint(result.c_str() + index + 1);
+            }
+        }
+
+        index = result.find("\r\n\r\n");
+        if (index != std::string::npos) {
+            result.replace(0, index + 4, "");
+        }
+
+        if (httpResult == 0) {
+            // the TCP connect worked but nothing usable came back
+            EMSESP::logger().warning("%s no valid response from %s (%u bytes)", is_https ? "HTTPS" : "HTTP", host.c_str(), (unsigned)received);
+        }
+    } else {
+        EMSESP::logger().warning("%s connection to %s failed", is_https ? "HTTPS" : "HTTP", host.c_str());
+    }
+    delete ssl_client;
+    delete basic_client;
+
+    return httpResult;
+}
+
+} // namespace emsesp

src/core/httpClient.h

@@ -0,0 +1,41 @@
+/*
+ * EMS-ESP - https://github.com/emsesp/EMS-ESP
+ * Copyright 2020-2026  emsesp.org
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef EMSESP_HTTPCLIENT_H
+#define EMSESP_HTTPCLIENT_H
+
+#include <ArduinoJson.h>
+
+#include <string>
+
+namespace emsesp {
+
+class HttpClient {
+  public:
+    static int request(std::string url, const std::string & method, const std::string & value, JsonObjectConst headers, std::string & result);
+
+  private:
+    static constexpr uint32_t CONNECT_TIMEOUT_MS    = 5000;  // TCP connect, the core defaults to 3s
+    static constexpr uint32_t FIRST_BYTE_TIMEOUT_MS = 8000;  // how long the server may take to start replying
+    static constexpr uint32_t IDLE_TIMEOUT_MS       = 500;   // gap in the stream that marks the end of a response
+    static constexpr uint32_t TOTAL_TIMEOUT_MS      = 10000; // ceiling for the whole read
+};
+
+} // namespace emsesp
+
+#endif

src/core/led.cpp

@@ -67,7 +67,6 @@ bool LED::loop(uint8_t healthcheck, bool button_busy) {
                 set_led(Color::YELLOW); // Yellow
             } else {
                 reset_led();
-                previous_healthcheck_ = System::HEALTHCHECK_RESET;
             }
             return false;
         }
@@ -75,39 +74,39 @@ bool LED::loop(uint8_t healthcheck, bool button_busy) {
         // check the system health.
         // Set the sequence accordingly, only if the healthcheck is not 0 and has changed
         if (healthcheck != previous_healthcheck_) {
-            previous_healthcheck_ = healthcheck;
-            color_steps_[0]       = Color::OFF;
-            color_steps_[1]       = Color::OFF;
-            color_steps_[2]       = Color::OFF;
+            color_steps_[0] = Color::OFF;
+            color_steps_[1] = Color::OFF;
+            color_steps_[2] = Color::OFF;
 
             // if the healthcheck is 0, i.e. system is healthy, reset the LED
             if (healthcheck == 0) {
                 reset_led();
-                return false;
+            } else {
+                //  1 flash (blue) is the EMS bus is not connected
+                //  2 flashes (red, red) if the network (wifi or ethernet) is not connected
+                //  3 flashes (red, red, blue) is both the bus and the network are not connected
+                bool no_network = (healthcheck & System::HEALTHCHECK_NO_NETWORK) == System::HEALTHCHECK_NO_NETWORK;
+                bool no_bus     = (healthcheck & System::HEALTHCHECK_NO_BUS) == System::HEALTHCHECK_NO_BUS;
+
+                // set step 1
+                if (no_network) {
+                    color_steps_[0] = Color::RED; // red, no network
+                } else if (no_bus) {
+                    color_steps_[0] = Color::BLUE; // blue, no bus
+                }
+
+                // set step 2
+                if (no_network) {
+                    color_steps_[1] = Color::RED; // red, no network
+                }
+
+                // set step 3
+                if (no_network && no_bus) {
+                    color_steps_[2] = Color::BLUE; // blue, no network and no bus
+                }
             }
 
-            //  1 flash (blue) is the EMS bus is not connected
-            //  2 flashes (red, red) if the network (wifi or ethernet) is not connected
-            //  3 flashes (red, red, blue) is both the bus and the network are not connected
-            bool no_network = (healthcheck & System::HEALTHCHECK_NO_NETWORK) == System::HEALTHCHECK_NO_NETWORK;
-            bool no_bus     = (healthcheck & System::HEALTHCHECK_NO_BUS) == System::HEALTHCHECK_NO_BUS;
-
-            // set step 1
-            if (no_network) {
-                color_steps_[0] = Color::RED; // red, no network
-            } else if (no_bus) {
-                color_steps_[0] = Color::BLUE; // blue, no bus
-            }
-
-            // set step 2
-            if (no_network) {
-                color_steps_[1] = Color::RED; // red, no network
-            }
-
-            // set step 3
-            if (no_network && no_bus) {
-                color_steps_[2] = Color::BLUE; // blue, no network and no bus
-            }
+            previous_healthcheck_ = healthcheck; // must be set after reset_led(), which invalidates it
         }
 
         // there's nothing to flash, so leave the LED in the state reset_led() gave it.
@@ -131,6 +130,10 @@ void LED::reset_led() {
     color_steps_[1] = Color::OFF;
     color_steps_[2] = Color::OFF;
 
+    // invalidate the last health state so the sequence is rebuilt on the next check,
+    // needed because the color steps above have been cleared
+    previous_healthcheck_ = System::HEALTHCHECK_RESET;
+
     // rewind the sequence so it starts from the top if the health degrades again
     led_long_timer_  = 1; // 1 will kick it off immediately
     led_short_timer_ = 0;

src/core/locale_translations.h

@@ -430,7 +430,7 @@ MAKE_TRANSLATION(pumpMode, "pumpmode", "boiler pump mode", "Kesselpumpenmodus",
 MAKE_TRANSLATION(pumpCharacter, "pumpcharacter", "boiler pump characteristic", "Charakteristik der Kesselpumpe", "karakteristiek ketelpomp", "pannpumpsegenskaper", "charakterystyka pompy kotłowej", "kjelepumpekarakteristikk", "caractéristique de la pompe de la chaudière", "kazan pompası karakteristiği", "caratteristica della pompa della caldaia", "charakteristika kotlového čerpadla", "charakteristika čerpadla kotle")
 MAKE_TRANSLATION(pumpOnTemp, "pumpontemp", "pump logic temperature", "Pumpenlogiktemperatur", "pomplogica temperatuur", "Pumplogiktemperatur", "temperatura logiki pompy", "pumpelogikktemperatur", "température logique pompe", "pompa mantık sıcaklığı", "temperatura logica pompa", "teplota logiky čerpadla", "teplota logiky čerpadla")
 MAKE_TRANSLATION(headertemp, "headertemp", "low loss header", "Hydr. Weiche", "open verdeler", "Fördelare", "sprzęgło hydrauliczne", "lav tap header", "bouteille de déc. hydr.", "isı bloğu gidiş suyu sıc.", "comp. idr.", "nízkostratová hlavica", "hydraulický oddělovač")
-MAKE_TRANSLATION(heatblock, "heatblock", "heating block", "Wärmezelle", "Aanvoertemp. warmtecel", "Värmeblock", "blok grzewczy", "varmeblokk", "départ corps de chauffe", "Hid.denge kabı sıcaklığı", "mandata scamb. pr.", "vykurovací blok", "blok topení")
+MAKE_TRANSLATION(heatblock, "heatblock", "Heatblock temperature", "Wärmeblocktemperatur", "Heatblock temperatuur", "Värmeblocktemperatur", "temperatura bloku grzewczego", "varmeblokk temperatur", "température du bloc chauffant", "ısı bloğu sıcaklığı", "temperatura blocco riscaldante", "teplota tepelného bloku", "teplota tepelného bloku")
 MAKE_TRANSLATION(pumpKickHour, "pumpkickhour", "pump kick hour", "Stunde Pumpkick")
 MAKE_TRANSLATION(pumpKickDay, "pumpkickday", "pump kick day", "Tag Pumpkick")
 MAKE_TRANSLATION(pumpKickDelay, "pumpkickdelay", "pump kick delay", "Pause vor Pumpkick")
@@ -581,7 +581,7 @@ MAKE_TRANSLATION(lowNoiseMode, "lownoisemode", "low noise mode", "Geräuscharmer
 MAKE_TRANSLATION(lowNoiseStart, "lownoisestart", "low noise starttime", "Start geräuscharmer Betrieb", "Start stil bedrijf", "Tyst drift starttid", "początek trybu cichego", "stille modu starttid", "heure démarrage faible bruit", "düşük ses başlangıç", "ora di avvio a basso rumore", "nízka hlučnosť spustenia", "čas začátku nízkého hluku")
 MAKE_TRANSLATION(lowNoiseStop, "lownoisestop", "low noise stoptime", "Stopp geräuscharmer Betrieb", "Stop stil bedrijf", "Tyst drift stopptid", "koniec trybu cichego", "stille modus stopptid", "heure arrêt faible bruit", "düşük ses bitiş", "ora di arresto funzionamento silenzioso", "doba zastavenia s nízkou hlučnosťou", "čas konce nízkého hluku")
 MAKE_TRANSLATION(energyPriceGas, "energypricegas", "energy price gas", "Energiepreis Gas", "Energieprijs gas", "Gaspris", "cena energii z gazu", "energipris gass", "prix énergie gaz", "gaz enerjisi fiyatı", "prezzo energia gas", "cena energie plyn", "cena energie plyn")
-MAKE_TRANSLATION(energyPriceEl, "energypriceel", "energy price electric", "Energiepreis Eletrizität", "energieprijs electriciteit", "Elpris", "cena energii elektrycznej", "strømpris", "prix énergie électrique", "elektrik enerjisi fiyatı", "prezzo energia elettrica", "cena elektrickej energie", "cena energie elektřina")
+MAKE_TRANSLATION(energyPriceEl, "energypriceel", "energy price electric", "Energiepreis Elektrizität", "energieprijs electriciteit", "Elpris", "cena energii elektrycznej", "strømpris", "prix énergie électrique", "elektrik enerjisi fiyatı", "prezzo energia elettrica", "cena elektrickej energie", "cena energie elektřina")
 MAKE_TRANSLATION(energyPricePV, "energyfeedpv", "feed in PV", "PV-Einspeisevergütung", "PV teruglevertarief", "PV Energi", "cena energii PV", "strømpris PV", "alimentation PV", "giren güneş enerjisi", "energia fotovoltaico", "Výkupná cena FV", "přetok FV")
 MAKE_TRANSLATION(hybridDHW, "hybriddhw", "hybrid DHW", "Hybrid-Warmwasser", "Hybride ww", "Hybridläge varmvatten", "hybrydowa c.w.u.", "hybridmodus varmtvann", "ecs hybride", "hibrit SKS", "ACS ibrida", "hybridná TÚV", "hybridní TUV")
 MAKE_TRANSLATION(airPurgeMode, "airpurgemode", "air purge mode", "Luftspülung", "Luchtzuivering", "Luftreningsläge", "tryb oczyszczania powietrza", "luftsrensningsmodus", "mode purge air", "hava temizleme modu", "modalita spurgo aria", "režim čistenia vzduchu", "režim odvzdušnění")

src/core/main.cpp

@@ -28,4 +28,7 @@ void setup() {
 
 void loop() {
     application.loop();
+#ifndef EMSESP_STANDALONE
+    delay(1); // block for a tick so the idle task gets to run and the core can clock-gate
+#endif
 }

src/core/modbus_entity_parameters.hpp

@@ -179,28 +179,29 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
     REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(fanWork), 257, 1), // fanwork
     REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(ignWork), 258, 1), // ignwork
     REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(oilPreHeat), 259, 1), // oilpreheat
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(burnMaxPower), 260, 1), // burnmaxpower
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(burnMinPeriod), 261, 1), // burnminperiod
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(absBurnPow), 262, 1), // absburnpow
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(heatblock), 263, 1), // heatblock
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boilHystOn), 264, 1), // boilhyston
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boilHystOff), 265, 1), // boilhystoff
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boil2HystOn), 266, 1), // boil2hyston
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boil2HystOff), 267, 1), // boil2hystoff
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(curveOn), 268, 1), // curveon
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(curveBase), 269, 1), // curvebase
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(curveEnd), 270, 1), // curveend
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(summertemp), 271, 1), // summertemp
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nofrostmode), 272, 1), // nofrostmode
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nofrosttemp), 273, 1), // nofrosttemp
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(gasMeterHeat), 274, 2), // gasmeterheat
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nrgHeat2), 276, 2), // nrgheat2
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nomPower), 278, 1), // nompower
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(netFlowTemp), 279, 1), // netflowtemp
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(heatValve), 280, 1), // heatvalve
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(keepWarmTemp), 281, 1), // keepwarmtemp
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(setReturnTemp), 282, 1), // setreturntemp
-    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(heatingOn), 283, 1), // heating
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(burnMinPower), 260, 1), // burnminpower
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(burnMaxPower), 261, 1), // burnmaxpower
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(burnMinPeriod), 262, 1), // burnminperiod
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(absBurnPow), 263, 1), // absburnpow
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(heatblock), 264, 1), // heatblock
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boilHystOn), 265, 1), // boilhyston
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boilHystOff), 266, 1), // boilhystoff
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boil2HystOn), 267, 1), // boil2hyston
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(boil2HystOff), 268, 1), // boil2hystoff
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(curveOn), 269, 1), // curveon
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(curveBase), 270, 1), // curvebase
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(curveEnd), 271, 1), // curveend
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(summertemp), 272, 1), // summertemp
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nofrostmode), 273, 1), // nofrostmode
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nofrosttemp), 274, 1), // nofrosttemp
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(gasMeterHeat), 275, 2), // gasmeterheat
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nrgHeat2), 277, 2), // nrgheat2
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(nomPower), 279, 1), // nompower
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(netFlowTemp), 280, 1), // netflowtemp
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(heatValve), 281, 1), // heatvalve
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(keepWarmTemp), 282, 1), // keepwarmtemp
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(setReturnTemp), 283, 1), // setreturntemp
+    REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DEVICE_DATA, FL_(heatingOn), 284, 1), // heating
     REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DHW, FL_(nrgWw), 0, 2), // nrg
     REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DHW, FL_(meterWw), 2, 2), // meter
     REGISTER_MAPPING(dt::BOILER, TAG_TYPE_DHW, FL_(upTimeCompWw), 4, 2), // uptimecomp

src/core/mqtt.cpp

@@ -51,7 +51,7 @@ bool        Mqtt::publish_single2cmd_;
 std::vector<Mqtt::MQTTSubFunction, AllocatorPSRAM<Mqtt::MQTTSubFunction>> Mqtt::mqtt_subfunctions_;
 
 uint32_t Mqtt::mqtt_publish_fails_ = 0;
-bool     Mqtt::connecting_         = false;
+bool     Mqtt::connected_          = false;
 bool     Mqtt::initialized_        = false;
 uint16_t Mqtt::queuecount_         = 0;
 uint8_t  Mqtt::connectcount_       = 0;
@@ -313,6 +313,31 @@ void Mqtt::on_publish(uint16_t packetId) const {
     LOG_DEBUG("Packet %d sent successful", packetId);
 }
 
+// gracefully disconnect from the broker by sending a proper MQTT DISCONNECT packet.
+// this is called just before a restart so the broker ends our session cleanly
+// (avoids a lingering session that shows up as "session taken over" on reconnect).
+//
+// the disconnect is deferred inside espMqttClient - the DISCONNECT packet is only
+// queued and actually sent when loop() runs the state machine. On PSRAM boards the
+// client has its own task that keeps pumping loop(), so it flushes on its own. On
+// non-PSRAM boards (UseInternalTask::NO) nothing drives loop() once we're mid-restart,
+// so we pump it here until the client is fully disconnected, bounded by a timeout.
+void Mqtt::disconnect() {
+    if (!mqttClient_) {
+        return;
+    }
+
+    mqttClient_->disconnect(); // graceful - queues the DISCONNECT packet
+
+    if (EMSESP::system_.PSram() == 0) {
+        uint32_t start = uuid::get_uptime();
+        while (!mqttClient_->disconnected() && (uuid::get_uptime() - start) < MQTT_DISCONNECT_TIMEOUT) {
+            mqttClient_->loop();
+            delay(2);
+        }
+    }
+}
+
 // called when MQTT settings have changed via the MQTT Settings or Application Settings Web pages
 void Mqtt::reset_mqtt() {
     if (!enabled()) {
@@ -326,6 +351,7 @@ void Mqtt::reset_mqtt() {
     if (mqttClient_->connected()) {
         mqttClient_->disconnect(true); // force a disconnect
     }
+    load_settings(); // reload MQTT settings
 }
 
 // load the settings from service
@@ -446,30 +472,39 @@ bool Mqtt::get_publish_onchange(uint8_t device_type) {
     }
     return false;
 }
-void Mqtt::on_disconnect(espMqttClientTypes::DisconnectReason reason) {
-    // only show the error once, not every 2 seconds
-    if (!connecting_) {
-        return;
-    }
-    connecting_ = false;
-    connectcount_++; // count # reconnects
 
-    if (reason == espMqttClientTypes::DisconnectReason::TCP_DISCONNECTED) {
-        LOG_WARNING("MQTT disconnected: TCP");
-    } else if (reason == espMqttClientTypes::DisconnectReason::MQTT_UNACCEPTABLE_PROTOCOL_VERSION) {
-        LOG_WARNING("MQTT disconnected: Unacceptable protocol version");
-    } else if (reason == espMqttClientTypes::DisconnectReason::MQTT_IDENTIFIER_REJECTED) {
-        LOG_WARNING("MQTT disconnected: Identifier Rejected");
-    } else if (reason == espMqttClientTypes::DisconnectReason::MQTT_SERVER_UNAVAILABLE) {
-        LOG_WARNING("MQTT disconnected: Server unavailable");
-    } else if (reason == espMqttClientTypes::DisconnectReason::MQTT_MALFORMED_CREDENTIALS) {
-        LOG_WARNING("MQTT disconnected: Malformed credentials");
-    } else if (reason == espMqttClientTypes::DisconnectReason::MQTT_NOT_AUTHORIZED) {
-        LOG_WARNING("MQTT disconnected: Not authorized");
-    } else if (reason == espMqttClientTypes::DisconnectReason::TLS_BAD_FINGERPRINT) {
-        LOG_WARNING("MQTT disconnected: Server fingerprint invalid");
+// human-readable cause for a MQTT disconnect reason, nullptr if not recognized
+static const char * mqtt_disconnect_cause(espMqttClientTypes::DisconnectReason reason) {
+    using espMqttClientTypes::DisconnectReason;
+
+    switch (reason) {
+    case DisconnectReason::TCP_DISCONNECTED:
+        return "TCP";
+    case DisconnectReason::MQTT_UNACCEPTABLE_PROTOCOL_VERSION:
+        return "Unaccepted protocol version";
+    case DisconnectReason::MQTT_IDENTIFIER_REJECTED:
+        return "Identifier Rejected";
+    case DisconnectReason::MQTT_SERVER_UNAVAILABLE:
+        return "Server unavailable";
+    case DisconnectReason::MQTT_MALFORMED_CREDENTIALS:
+        return "Malformed credentials";
+    case DisconnectReason::MQTT_NOT_AUTHORIZED:
+        return "Not authorized";
+    case DisconnectReason::TLS_BAD_FINGERPRINT:
+        return "Server fingerprint invalid";
+    default:
+        return nullptr;
+    }
+}
+
+void Mqtt::on_disconnect(espMqttClientTypes::DisconnectReason reason) {
+    connected_ = false;
+
+    const char * cause = mqtt_disconnect_cause(reason);
+    if (cause) {
+        LOG_ERROR("MQTT connection failure: %s. Retrying...", cause);
     } else {
-        LOG_WARNING("MQTT disconnected: code %d", reason);
+        LOG_ERROR("MQTT connection failure: code %d. Retrying...", static_cast<int>(reason));
     }
 
     mqttClient_->clearQueue(true);
@@ -477,17 +512,16 @@ void Mqtt::on_disconnect(espMqttClientTypes::DisconnectReason reason) {
 
 // MQTT on_connect - when an MQTT connect is established
 void Mqtt::on_connect() {
-    if (connecting_) {
+    if (connected_) {
         return; // prevent duplicated connections
     }
 
     LOG_INFO("MQTT connected");
 
-    connecting_ = true;
+    connected_ = true;
+    connectcount_++;
     queuecount_ = mqttClient_->queueSize();
 
-    load_settings(); // reload MQTT settings - in case they have changes
-
     if (ha_enabled_) {
         queue_unsubscribe_message(discovery_prefix_ + "/+/" + Mqtt::basename() + "/#");
         EMSESP::reset_mqtt_ha(); // re-create all HA devices if there are any
@@ -587,9 +621,11 @@ void Mqtt::ha_status() {
 
     // These come from the info MQTT topic - and handled in the publish_ha_sensor_config function
     publish_system_ha_sensor_config(DeviceValueType::STRING, "Version", "version", DeviceValueUOM::NONE);
-    publish_system_ha_sensor_config(DeviceValueType::STRING, "Boot time", "bootTime", DeviceValueUOM::UPTIME);
+    publish_system_ha_sensor_config(DeviceValueType::STRING,
+                                    "Uptime",
+                                    "bootTime",
+                                    DeviceValueUOM::UPTIME); // called Uptime in HA and derives value from bootTime element in info topic
 }
-
 // add sub or pub task to the queue.
 // the base is not included in the topic
 bool Mqtt::queue_message(const uint8_t operation, const std::string & topic, const std::string & payload, const bool retain) {
@@ -988,10 +1024,9 @@ bool Mqtt::publish_ha_sensor_config(uint8_t               type,        // EMSdev
 
     // set the entity_id. This is breaking change in HA 2025.10.0 - see https://github.com/home-assistant/core/pull/151775
     // extract the string from topic up to the / using std::string
+    // it must be lowercase (although HA will slugify it and not reject it)
     std::string topic_str(topic);
-    doc["def_ent_id"] = topic_str.substr(0, topic_str.find("/")) + "." + uniq_id;
-
-    char sample_val[30] = "0"; // sample, correct(!) entity value, used only to prevent warning/error in HA if real value is not published yet
+    doc["def_ent_id"] = Helpers::toLower(topic_str.substr(0, topic_str.find("/"))) + "." + Helpers::toLower(uniq_id);
 
     // we add the command topic parameter for commands
     if (has_cmd) {
@@ -1015,13 +1050,11 @@ bool Mqtt::publish_ha_sensor_config(uint8_t               type,        // EMSdev
                 for (uint8_t i = 0; i < options_size; i++) {
                     option_list.add(Helpers::itoa(i)); // as a string
                 }
-                snprintf(sample_val, sizeof(sample_val), "'0'");
             } else {
                 // use strings
                 for (uint8_t i = 0; i < options_size; i++) {
                     option_list.add(Helpers::translated_word(options[i]));
                 }
-                snprintf(sample_val, sizeof(sample_val), "'%s'", Helpers::translated_word(options[0]));
             }
         } else if (type != DeviceValueType::STRING && type != DeviceValueType::BOOL) {
             // For numeric's add the range and mode
@@ -1043,7 +1076,6 @@ bool Mqtt::publish_ha_sensor_config(uint8_t               type,        // EMSdev
         if (dv_set_min != 0 || dv_set_max != 0) {
             doc["min"] = dv_set_min;
             doc["max"] = dv_set_max;
-            snprintf(sample_val, sizeof(sample_val), "%i", dv_set_min);
         }
     }
 
@@ -1067,7 +1099,7 @@ bool Mqtt::publish_ha_sensor_config(uint8_t               type,        // EMSdev
         snprintf(stat_t, sizeof(stat_t), "~/%s", tag_to_topic(device_type, tag).c_str());
 
         // Override - there are exceptions for DeviceType::SYSTEM, which uses the heartbeat topic
-        // and when fetching the version and bootTime we want to take this from the info topic instead
+        // and when fetching the version and uptime we want to take this from the info topic instead
         if (device_type == EMSdevice::DeviceType::SYSTEM) {
             // handle the exceptions
             if (strncmp(entity, "version", 7) == 0) {
@@ -1095,18 +1127,19 @@ bool Mqtt::publish_ha_sensor_config(uint8_t               type,        // EMSdev
         // has no unit of measure or icon, and must be true/false (not on/off or 1/0)
         if (type == DeviceValueType::BOOL) {
             add_ha_bool(doc.as<JsonObject>());
-            strlcpy(sample_val, "false", sizeof(sample_val)); // default is "false"
         }
 
         // don't bother with value template conditions if using Domoticz which doesn't fully support MQTT Discovery
         if (discovery_type() == discoveryType::HOMEASSISTANT) {
+            // handle special cases for value_template depending on the uom
             if (uom == DeviceValueUOM::TIMESTAMP) {
-                // special case for timestamp, using "value_template": "{{ (value_json.bootTime | as_datetime).isoformat() }}",
+                // uptime
                 char val_tpl[100];
                 snprintf(val_tpl, sizeof(val_tpl), "{{ (value_json.%s | as_datetime).isoformat() }}", entity);
                 doc["val_tpl"] = val_tpl;
             } else {
-                doc["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + " else " + sample_val + "}}";
+                // default
+                doc["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + " else 'None'}}";
             }
             add_ha_avty_section(doc.as<JsonObject>(), stat_t, val_cond); // adds availability section
         } else {
@@ -1141,7 +1174,7 @@ bool Mqtt::publish_ha_sensor_config(uint8_t               type,        // EMSdev
 // https://developers.home-assistant.io/docs/core/entity/sensor/
 // Home Assistant tracks the min, max and mean value during the statistics period
 // For statistics, the sensor must have state_class set to either MEASUREMENT, TOTAL or TOTAL_INCREASING
-// When set to MEASUREMENT the device_class must cannot be DATE, ENUM, ENERGY, GAS, MONETARY, TIMESTAMP, VOLUME or WATER
+// When set to MEASUREMENT the device_class must cannot be DATE, ENUM, ENERGY, GAS, MONETARY, TIMESTAMP, UPTIME, VOLUME or WATER
 //
 void Mqtt::add_ha_classes(JsonObject doc, const uint8_t device_type, const uint8_t type, const uint8_t uom, const char * entity, bool display_only) {
     if (device_type == EMSdevice::DeviceType::SYSTEM) {
@@ -1280,7 +1313,7 @@ void Mqtt::add_ha_classes(JsonObject doc, const uint8_t device_type, const uint8
         doc[sc_ha] = sc_ha_measurement;
         doc[dc_ha] = "timestamp";
         break;
-    case DeviceValueUOM::UPTIME:
+    case DeviceValueUOM::UPTIME: // no state class for uptime
         doc[dc_ha] = "uptime";
         break;
     case DeviceValueUOM::MV:
@@ -1403,7 +1436,7 @@ bool Mqtt::publish_ha_climate_config(const DeviceValue & dv, const bool has_room
 
     snprintf(mode_str_tpl,
              sizeof(mode_str_tpl),
-             "{%%if %s%%}off{%%elif %s=='%s'%%}heat{%%elif %s=='%s'%%}heat{%%elif %s=='%s'%%}heat{%%elif %s=='%s'%%}off{%%elif %s=='%s'%%}off{%%elif "
+             "{%%if %s%%}None{%%elif %s=='%s'%%}heat{%%elif %s=='%s'%%}heat{%%elif %s=='%s'%%}heat{%%elif %s=='%s'%%}off{%%elif %s=='%s'%%}off{%%elif "
              "%s=='%s'%%}off{%%else%%}auto{%%endif%%}",
              hc_mode_cond,
              hc_mode_s,
@@ -1440,15 +1473,15 @@ bool Mqtt::publish_ha_climate_config(const DeviceValue & dv, const bool has_room
     doc["mode_stat_tpl"] = mode_str_tpl;
     doc["temp_cmd_t"]    = temp_cmd_s;
     doc["temp_stat_t"]   = topic_t;
-    doc["temp_stat_tpl"] = (std::string) "{{" + seltemp_s + " if " + seltemp_cond + " else 0}}";
+    doc["temp_stat_tpl"] = (std::string) "{{" + seltemp_s + " if " + seltemp_cond + " else 'None'}}";
 
     if (has_roomtemp) {
         doc["curr_temp_t"]   = topic_t;
-        doc["curr_temp_tpl"] = (std::string) "{{" + currtemp_s + " if " + currtemp_cond + " else 0}}";
+        doc["curr_temp_tpl"] = (std::string) "{{" + currtemp_s + " if " + currtemp_cond + " else 'None'}}";
     }
     if (tag >= DeviceValueTAG::TAG_SRC1) {
         doc["curr_hum_t"]   = topic_t;
-        doc["curr_hum_tpl"] = (std::string) "{{" + currhum_s + " if " + currhum_cond + " else 0}}";
+        doc["curr_hum_tpl"] = (std::string) "{{" + currhum_s + " if " + currhum_cond + " else 'None'}}";
     }
 
     doc["min_temp"]   = Helpers::render_value(min_s, min, 0, EMSESP::system_.fahrenheit() ? 2 : 0);
@@ -1602,9 +1635,6 @@ void Mqtt::add_ha_avty_section(JsonObject doc, const char * state_t, const char
             avty_json["t"] = state;
             snprintf(tpl, sizeof(tpl), "{{'online' if %s else 'offline'}}", cond1);
             avty_json["val_tpl"] = tpl;
-            if (!avty.add(avty_json)) {
-                LOG_WARNING("Failed to add availability condition 1 (low memory)");
-            }
         }
 
         // condition 2
@@ -1613,9 +1643,6 @@ void Mqtt::add_ha_avty_section(JsonObject doc, const char * state_t, const char
             avty_json["t"] = state;
             snprintf(tpl, sizeof(tpl), "{{'online' if %s else 'offline'}}", cond2);
             avty_json["val_tpl"] = tpl;
-            if (!avty.add(avty_json)) {
-                LOG_WARNING("Failed to add availability condition 2 (low memory)");
-            }
         }
 
         // negative condition
@@ -1624,9 +1651,6 @@ void Mqtt::add_ha_avty_section(JsonObject doc, const char * state_t, const char
             avty_json["t"] = state;
             snprintf(tpl, sizeof(tpl), "{{'offline' if %s else 'online'}}", negcond);
             avty_json["val_tpl"] = tpl;
-            if (!avty.add(avty_json)) {
-                LOG_WARNING("Failed to add negative availability condition (low memory)");
-            }
         }
     }
 

src/core/mqtt.h

@@ -61,8 +61,9 @@ class Mqtt {
     enum Operation : uint8_t { PUBLISH, SUBSCRIBE, UNSUBSCRIBE };
     enum NestedFormat : uint8_t { NESTED = 1, SINGLE };
 
-    static constexpr uint8_t  MQTT_TOPIC_MAX_SIZE = 128; // fixed, not a user setting anymore
-    static constexpr uint16_t MQTT_QUEUE_MAX_SIZE = 300;
+    static constexpr uint8_t  MQTT_TOPIC_MAX_SIZE     = 128; // fixed, not a user setting anymore
+    static constexpr uint16_t MQTT_QUEUE_MAX_SIZE     = 300;
+    static constexpr uint32_t MQTT_DISCONNECT_TIMEOUT = 1000; // max ms to flush a graceful disconnect on non-PSRAM boards
 
     static void on_connect();
     static void on_disconnect(espMqttClientTypes::DisconnectReason reason);
@@ -132,11 +133,7 @@ class Mqtt {
         return mqttClient_ ? mqttClient_->connected() : false;
     }
 
-    static void disconnect() {
-        if (mqttClient_) {
-            mqttClient_->disconnect();
-        };
-    }
+    static void disconnect();
 
     static bool enabled() {
         return mqtt_enabled_;
@@ -300,7 +297,7 @@ class Mqtt {
     uint32_t last_publish_heartbeat_  = 0;
     // uint32_t last_publish_queue_      = 0;
 
-    static bool     connecting_;
+    static bool     connected_;
     static bool     initialized_;
     static uint32_t mqtt_publish_fails_;
     static uint16_t queuecount_;

src/core/network.cpp

@@ -49,9 +49,10 @@ void Network::begin() {
         nosleep_        = settings.nosleep;
         tx_power_       = settings.tx_power;
         bssid_          = settings.bssid;
+        eth_10mbit_     = settings.eth_10mbit;
     });
 
-    // read Ethernet settings
+    // read Ethernet hardware settings
     EMSESP::webSettingsService.read([&](WebSettings & settings) {
         phy_type_       = settings.phy_type;
         eth_power_      = settings.eth_power;
@@ -78,39 +79,16 @@ void Network::begin() {
 
     phase_ = initialPhase();
 
-    // Initialise WiFi once when the Network service starts
-    WiFi.persistent(false);
-    WiFi.setAutoReconnect(false);
-    WiFi.mode(WIFI_STA);
+    startWiFiRadio();
 
-    if (WiFi.STA.started()) {
-        WiFi.disconnect(true, true); // wipe old settings; only when STA is up
-    } else {
-        WiFi.disconnect(true, false); // disconnect/off without erase, so no warning is shown
+#if CONFIG_IDF_TARGET_ESP32
+    // Ethernet is switched off but the board still has a PHY wired up. Hold its power/oscillator
+    // enable low so an unused LAN8720 isn't left clocked and burning current for the whole uptime.
+    if (phy_type_ == PHY_type::PHY_TYPE_NONE && eth_power_ != -1) {
+        pinMode(eth_power_, OUTPUT);
+        digitalWrite(eth_power_, LOW);
     }
-
-    WiFi.setScanMethod(WIFI_ALL_CHANNEL_SCAN);
-    WiFi.setHostname(hostname_.c_str());     // updates shared default_hostname buffer
-    WiFi.enableSTA(true);                    // creates the STA netif
-    WiFi.STA.setHostname(hostname_.c_str()); // pushes to esp_netif_set_hostname
-    WiFi.enableIPv6(true);
-    if (staticIPConfig_) {
-        WiFi.config(localIP_, gatewayIP_, subnetMask_, dnsIP1_, dnsIP2_); // configure for static IP
-    }
-
-    // www.esp32.com/viewtopic.php?t=12055
-    if (bandwidth20_) {
-        esp_wifi_set_bandwidth(static_cast<wifi_interface_t>(ESP_IF_WIFI_STA), WIFI_BW_HT20);
-    } else {
-        esp_wifi_set_bandwidth(static_cast<wifi_interface_t>(ESP_IF_WIFI_STA), WIFI_BW_HT40);
-    }
-    if (nosleep_) {
-        WiFi.setSleep(false); // turn off sleep - WIFI_PS_NONE
-    }
-
-    // scan settings give connect issues since arduino 2.0.14 and arduino 3.x.x with some wifi systems
-    // WiFi.setScanMethod(WIFI_ALL_CHANNEL_SCAN); // default is FAST_SCAN
-    // WiFi.setSortMethod(WIFI_CONNECT_AP_BY_SIGNAL); // is default, no need to set
+#endif
 
     // avoid duplicate registration, so register the lambdas only once across the lifetime of this Network instance
     if (!wifi_events_registered_) {
@@ -220,10 +198,10 @@ void Network::reconnect() {
     LOG_DEBUG("Reconnecting all networks");
 
 #ifndef EMSESP_STANDALONE
-    // disconnect WiFi
+    // Drop STA association but leave the driver running. begin() re-applies hostname
+    // and IPv6; tearing the radio down here races with WIFI_EVENT_STA_START (12289/259).
     if (wifi_connected()) {
-        WiFi.disconnect(true, true);
-        WiFi.mode(WIFI_STA); // reset mode
+        WiFi.disconnect(false, true);
     }
 
     // disconnect AP
@@ -249,11 +227,17 @@ void Network::reconnect() {
 
 // pick the first phase that has the hardware/config to even be attempted on this device.
 // boards without an Ethernet PHY skip straight to WIFI; without a configured SSID, straight to AP
+// (unless AP provision mode is Never — then stay on WIFI and keep waiting)
 NetPhase Network::initialPhase() const {
-    if (phy_type_ != PHY_type::PHY_TYPE_NONE) {
+#if CONFIG_IDF_TARGET_ESP32
+
+    bool eth_clock_conflicts_psram =
+        ESP.getPsramSize() && ((eth_clock_mode_t)eth_clock_mode_ == ETH_CLOCK_GPIO16_OUT || (eth_clock_mode_t)eth_clock_mode_ == ETH_CLOCK_GPIO17_OUT);
+    if (phy_type_ != PHY_type::PHY_TYPE_NONE && !eth_clock_conflicts_psram) {
         return NetPhase::ETHERNET;
     }
-    if (!ssid_.isEmpty()) {
+#endif
+    if (!ssid_.isEmpty() || ap_provisionMode_ == AP_MODE_NEVER) {
         return NetPhase::WIFI;
     }
     return NetPhase::AP;
@@ -262,6 +246,16 @@ NetPhase Network::initialPhase() const {
 // network loop, looking for new and disconnecting networks
 void Network::loop() {
 #ifndef EMSESP_STANDALONE
+    // a reconnect was requested from another task, run it here where nothing is mid-request
+    if (reconnect_pending_) {
+        reconnect_pending_ = false;
+        reconnect();
+    }
+    // already have a connection: verify it's still alive
+    if (network_ip_ != 0 || last_disconnect_reason_ != 0) {
+        checkConnection();
+    }
+
     // if we already have a Wifi or Ethernet connection then re-check every NETWORK_RECONNECTION_DELAY_LONG, otherwise NETWORK_RECONNECTION_DELAY_SHORT
     const unsigned long currentMillis = uuid::get_uptime_ms();
     const uint32_t      reconnectDelay =
@@ -274,11 +268,6 @@ void Network::loop() {
         startWIFI();     // WiFi
         startAP();       // Captive Portal (AP)
 
-        // already have a connection: verify it's still alive
-        if (network_ip_ != 0 || last_disconnect_reason_ != 0) {
-            checkConnection();
-        }
-
         findNetworks(); // detect any new network connections
     }
 
@@ -320,6 +309,10 @@ void Network::checkConnection() {
         network_iface_            = NetIface::NONE;
         if (lost_iface == NetIface::ETHERNET) {
             LOG_WARNING("Ethernet connection lost");
+            // restore the radio now so the WiFi and AP fallbacks have something to work with
+            if (wifi_radio_off_) {
+                startWiFiRadio();
+            }
             return;
         }
         begin();
@@ -496,6 +489,59 @@ const char * Network::disconnectReason([[maybe_unused]] uint8_t code) {
     return "";
 }
 
+// Bring up the STA interface and apply all the radio-level settings to it
+// Safe to call repeatedly - enableSTA() is a no-op when the STA is already running, and recreates the netif after stopWiFiRadio() has torn it down
+void Network::startWiFiRadio() {
+#ifndef EMSESP_STANDALONE
+    WiFi.persistent(false); // keep credentials in RAM so we don't auto-join leftover NVS config
+    WiFi.setAutoReconnect(false);
+    WiFi.mode(WIFI_STA);
+
+    // Keep the radio up. disconnect(wifioff=true) maps to STA.end() -> esp_wifi_stop()
+    if (WiFi.STA.started()) {
+        WiFi.disconnect(false, true); // drop leftover association, wipe RAM config
+    }
+
+    // scan settings give connect issues since arduino 2.0.14 and arduino 3.x.x with some wifi systems
+    WiFi.setScanMethod(WIFI_ALL_CHANNEL_SCAN); // default is FAST_SCAN
+    WiFi.setHostname(hostname_.c_str());       // updates shared default_hostname buffer
+    WiFi.enableSTA(true);                      // no-op if already STA; recreates netif after a full off
+    WiFi.STA.setHostname(hostname_.c_str());   // pushes to esp_netif_set_hostname
+    WiFi.enableIPv6(true);
+    if (staticIPConfig_) {
+        WiFi.config(localIP_, gatewayIP_, subnetMask_, dnsIP1_, dnsIP2_); // configure for static IP
+    }
+
+    // www.esp32.com/viewtopic.php?t=12055
+    if (bandwidth20_) {
+        esp_wifi_set_bandwidth(static_cast<wifi_interface_t>(ESP_IF_WIFI_STA), WIFI_BW_HT20);
+    } else {
+        esp_wifi_set_bandwidth(static_cast<wifi_interface_t>(ESP_IF_WIFI_STA), WIFI_BW_HT40);
+    }
+    if (nosleep_) {
+        WiFi.setSleep(false); // turn off sleep - WIFI_PS_NONE
+    } else {
+        WiFi.setSleep(true); // WIFI_PS_MIN_MODEM
+    }
+
+    wifi_radio_off_ = false;
+#endif
+}
+
+// Power down the WiFi radio completely (esp_wifi_stop), used when Ethernet is carrying the traffic.
+// An idle STA still keeps the receiver powered. It also unloads the driver's DMA buffer pool of around 20KB
+void Network::stopWiFiRadio() {
+#ifndef EMSESP_STANDALONE
+    if (wifi_radio_off_) {
+        return;
+    }
+    WiFi.mode(WIFI_OFF);
+    wifi_radio_off_       = true;
+    wifi_connect_pending_ = false;
+    LOG_DEBUG("Powering down WiFi radio, Ethernet is active");
+#endif
+}
+
 // WiFi management
 void Network::startWIFI() {
 #ifndef EMSESP_STANDALONE
@@ -504,6 +550,11 @@ void Network::startWIFI() {
         return;
     }
 
+    // the radio was powered down while Ethernet was up, so bring it back before trying to associate
+    if (wifi_radio_off_) {
+        startWiFiRadio();
+    }
+
     // exit if WiFi or Ethernet is already connected, or if we have no SSID or another Wifi.begin() is already in progress
     if (WiFi.isConnected() || ssid_.isEmpty() || ethernet_connected() || wifi_connect_pending_) {
         return;
@@ -522,6 +573,15 @@ void Network::startWIFI() {
 #endif
 }
 
+#if CONFIG_IDF_TARGET_ESP32 && !defined(EMSESP_STANDALONE)
+static char eth_hostname[33] = {0};
+static void ethApplyHostname(void * /*arg*/, esp_event_base_t /*base*/, int32_t /*event_id*/, void * /*event_data*/) {
+    if (eth_hostname[0] != '\0' && ETH.netif() != nullptr) {
+        esp_netif_set_hostname(ETH.netif(), eth_hostname);
+    }
+}
+#endif
+
 // Ethernet management
 // Brings up the ETH driver / netif exactly once. After ETH.begin() returns true the driver
 // continues to run autonomously (link negotiation, DHCP, etc)
@@ -533,8 +593,8 @@ void Network::startEthernet() {
         return;
     }
 
-    // already up and running, nothing to do
-    if (ethernet_connect_pending_ || ethernet_connected()) {
+    // Ensure the Ethernet driver is installed once and then left alone
+    if (ethernet_started_ || ethernet_connect_pending_ || ethernet_connected()) {
         return;
     }
 
@@ -545,6 +605,11 @@ void Network::startEthernet() {
         return;
     }
 
+    if (ESP.getPsramSize() && ((eth_clock_mode_t)eth_clock_mode_ == ETH_CLOCK_GPIO16_OUT || (eth_clock_mode_t)eth_clock_mode_ == ETH_CLOCK_GPIO17_OUT)) {
+        LOG_ERROR("Ethernet clock mode %d (GPIO16/17) conflicts with PSRAM - disabling Ethernet", eth_clock_mode_);
+        return;
+    }
+
     /*
     // The Tasmota SDK is built with CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=2, so the Ethernet MAC is derived as
     // a locally-administered address from base+1 instead of the universal base+3 that Arduino Core 2 used.
@@ -577,16 +642,52 @@ void Network::startEthernet() {
     eth_phy_type_t type = (phy_type_ == PHY_type::PHY_TYPE_LAN8720)  ? ETH_PHY_LAN8720
                           : (phy_type_ == PHY_type::PHY_TYPE_TLK110) ? ETH_PHY_TLK110
                                                                      : ETH_PHY_RTL8201; // Type of the Ethernet PHY (LAN8720 or TLK110)
+
+    // must be in place before ETH.begin() so it beats the esp_netif glue to the START event
+    strlcpy(eth_hostname, hostname_.c_str(), sizeof(eth_hostname));
+    if (!eth_hostname_handler_registered_ && esp_event_handler_register(ETH_EVENT, ETHERNET_EVENT_START, ethApplyHostname, nullptr) == ESP_OK) {
+        eth_hostname_handler_registered_ = true;
+    }
+
+    // Forcing 10BASE-T roughly halves the PHY's power draw
+    if (eth_10mbit_) {
+        ETH.setAutoNegotiation(false);
+        ETH.setLinkSpeed(10);
+        ETH.setFullDuplex(false);
+    }
+
     if (ETH.begin(type, eth_phy_addr_, 23, 18, eth_power_, (eth_clock_mode_t)eth_clock_mode_)) {
-        LOG_DEBUG("Ethernet module found - starting");
+        // LOG_DEBUG("Ethernet module found - initialising");
+        ethernet_started_         = true;
         ethernet_connect_pending_ = true;
-        ETH.setHostname(hostname_.c_str()); // Push hostname to the ETH netif immediately after it's created
+
+        // check whether DHCP already announced us under lwIP's default hostname, before we correct it
+        esp_netif_t * eth_netif    = ETH.netif();
+        const char *  old_hostname = nullptr;
+        bool          stale_dhcp   = false;
+        if (eth_netif != nullptr && !staticIPConfig_) {
+            esp_netif_dhcp_status_t dhcp_status = ESP_NETIF_DHCP_INIT;
+            stale_dhcp = esp_netif_get_hostname(eth_netif, &old_hostname) == ESP_OK && old_hostname != nullptr && hostname_ != old_hostname
+                         && esp_netif_dhcpc_get_status(eth_netif, &dhcp_status) == ESP_OK && dhcp_status == ESP_NETIF_DHCP_STARTED;
+        }
+
+        if (!ETH.setHostname(hostname_.c_str())) {
+            LOG_WARNING("Failed to set Ethernet hostname to %s", hostname_.c_str());
+        }
+
+        // the DHCP server has already been given the wrong name, so re-run the client to re-announce
+        if (stale_dhcp) {
+            LOG_DEBUG("Restarting Ethernet DHCP client to announce hostname %s", hostname_.c_str());
+            esp_netif_dhcpc_stop(eth_netif);
+            esp_netif_dhcpc_start(eth_netif);
+        }
+
         ETH.enableIPv6(true);
         if (staticIPConfig_) {
             ETH.config(localIP_, gatewayIP_, subnetMask_, dnsIP1_, dnsIP2_);
         }
     } else {
-        LOG_ERROR("Failed to start Ethernet module");
+        LOG_ERROR("Failed to start Ethernet");
     }
 #endif
 #endif
@@ -631,6 +732,11 @@ void Network::findNetworks() {
         }
 
         const NetIface candidate = iface_from_desc(desc);
+        // AP is disabled in settings — don't treat SoftAP as a usable network
+        if (candidate == NetIface::AP && ap_provisionMode_ == AP_MODE_NEVER) {
+            continue;
+        }
+
         if (iface_priority(candidate) <= iface_priority(best_iface)) {
             continue; // already have something at least as good
         }
@@ -679,6 +785,11 @@ void Network::findNetworks() {
             stopAP();
         }
 
+        // Ethernet is carrying the traffic so the STA is dead weight - shut the radio down.
+        if (network_iface_ == NetIface::ETHERNET) {
+            stopWiFiRadio();
+        }
+
         // count the number of restarts (for Wifi and Eth)
         if (juststopped_) {
             juststopped_ = false;
@@ -709,12 +820,17 @@ void Network::findNetworks() {
                                                : "AP");
 
         // give up on this interface and try the next one. ETHERNET -> WIFI (or straight to AP if no SSID configured); WIFI -> AP.
+        // AP_MODE_NEVER: never promote to the AP phase — keep waiting on the current interface.
         if (connect_retry_ >= MAX_NETWORK_RECONNECTION_ATTEMPTS && phase_ != NetPhase::AP) {
             if (phase_ == NetPhase::ETHERNET) {
                 if (ssid_.isEmpty()) {
                     if (!ethernet_ever_connected_) {
-                        LOG_WARNING("Ethernet failed to connect after %u attempts, falling back to AP", connect_retry_);
-                        phase_ = NetPhase::AP;
+                        if (ap_provisionMode_ == AP_MODE_NEVER) {
+                            LOG_WARNING("Ethernet failed to connect after %u attempts (AP provision mode is Never)", connect_retry_);
+                        } else {
+                            LOG_WARNING("Ethernet failed to connect after %u attempts, falling back to AP", connect_retry_);
+                            phase_ = NetPhase::AP;
+                        }
                     }
                 } else {
                     LOG_WARNING("Ethernet failed to connect after %u attempts, switching to WiFi", connect_retry_);
@@ -723,8 +839,12 @@ void Network::findNetworks() {
                 ethernet_connect_pending_ = false;
             } else if (phase_ == NetPhase::WIFI) {
                 if (!wifi_ever_connected_) {
-                    LOG_WARNING("WiFi failed to connect after %u attempts, falling back to AP", connect_retry_);
-                    phase_ = NetPhase::AP;
+                    if (ap_provisionMode_ == AP_MODE_NEVER) {
+                        LOG_WARNING("WiFi failed to connect after %u attempts (AP provision mode is Never)", connect_retry_);
+                    } else {
+                        LOG_WARNING("WiFi failed to connect after %u attempts, falling back to AP", connect_retry_);
+                        phase_ = NetPhase::AP;
+                    }
                 }
                 wifi_connect_pending_ = false;
             }
@@ -754,6 +874,11 @@ void Network::startAP() {
         return;
     }
 
+    // the AP needs the radio, which may have been powered down while Ethernet was up
+    if (wifi_radio_off_) {
+        startWiFiRadio();
+    }
+
     if (!WiFi.softAPConfig(ap_localIP_, ap_gatewayIP_, ap_subnetMask_)) {
         LOG_DEBUG("softAPConfig failed");
         return;

src/core/network.h

@@ -138,6 +138,11 @@ class Network {
 
     void reconnect();
 
+    // ask for a reconnect() to run from the next Network::loop()
+    void schedule_reconnect() {
+        reconnect_pending_ = true;
+    }
+
     // map a netif description string (from esp_netif_get_desc) to a NetIface
     static NetIface iface_from_desc(const char * desc) {
         if (!desc) {
@@ -181,6 +186,8 @@ class Network {
     void         startAP();
     void         startWIFI();
     void         startEthernet();
+    void         startWiFiRadio();
+    void         stopWiFiRadio();
     void         setWiFiPower(uint8_t tx_power);
     const char * disconnectReason(uint8_t code);
     void         stopAP();
@@ -202,12 +209,16 @@ class Network {
 
     volatile bool wifi_connect_pending_     = false;
     volatile bool ethernet_connect_pending_ = false;
+    volatile bool reconnect_pending_        = false; // set by schedule_reconnect(), actioned in loop()
 
     NetPhase phase_ = NetPhase::ETHERNET;
 
-    bool wifi_events_registered_  = false; // ensure WiFi.onEvent() handlers are registered only once across begin()/reconnect() cycles
-    bool wifi_ever_connected_     = false; // set true once we've successfully obtained an IP
-    bool ethernet_ever_connected_ = false; // set true once we've successfully obtained an IP
+    bool wifi_events_registered_          = false; // ensure WiFi.onEvent() handlers are registered only once across begin()/reconnect() cycles
+    bool eth_hostname_handler_registered_ = false; // for the ETHERNET_EVENT_START hostname handler
+    bool ethernet_started_                = false; // ETH.begin() succeeded; the driver runs for the lifetime of the boot
+    bool wifi_ever_connected_             = false; // set true once we've successfully obtained an IP
+    bool ethernet_ever_connected_         = false; // set true once we've successfully obtained an IP
+    bool wifi_radio_off_                  = false; // STA powered down because Ethernet is carrying the traffic
 
     // Network and AP settings
     bool      enableMDNS_;
@@ -228,6 +239,7 @@ class Network {
     int8_t    eth_power_;
     uint8_t   eth_phy_addr_;
     uint8_t   eth_clock_mode_;
+    bool      eth_10mbit_;
 
     // AP settings
     uint8_t   ap_provisionMode_;

src/core/shower.cpp

@@ -36,7 +36,7 @@ void Shower::start() {
     Command::add_json(
         EMSdevice::DeviceType::BOILER,
         F_(coldshot),
-        [&](const char * value, const int8_t id, JsonObject output) {
+        [this](const char * value, const int8_t id, JsonObject output) {
             LOG_INFO("Forcing coldshot...");
             if (shower_state_) {
                 output["message"] = "OK";
@@ -229,7 +229,7 @@ void Shower::create_ha_discovery() {
 
         // don't bother with value template conditions if using Domoticz which doesn't fully support MQTT Discovery
         if (Mqtt::discovery_type() == Mqtt::discoveryType::HOMEASSISTANT) {
-            doc["val_tpl"] = "{{value_json.duration if value_json.duration is defined else 0}}";
+            doc["val_tpl"] = "{{value_json.duration if value_json.duration is defined else 'None'}}";
         } else {
             doc["val_tpl"] = "{{value_json.duration}}";
         }

src/core/shuntingYard.cpp

@@ -22,8 +22,7 @@
 
 #include "shuntingYard.h"
 
-#include <WiFiClient.h>
-#include <ESP_SSLClient.h>
+#include "httpClient.h"
 
 namespace emsesp {
 
@@ -336,7 +335,6 @@ bool isnum(const std::string & s) {
     return false;
 }
 
-
 // replace commands like "<device>/<hc>/<cmd>" with its value"
 std::string commands(std::string & expr, bool quotes) {
     auto expr_new = Helpers::toLower(expr);
@@ -481,14 +479,14 @@ std::string calculate(const std::string & expr) {
             const auto rhs = stack.back();
             stack.pop_back();
             if (token.str[0] == '!') {
-                if (to_logic(rhs) < 0) {
-                }
-                if (to_logic(rhs) >= 0) {
-                    stack.push_back(to_logic(rhs) == 0 ? "1" : "0");
+                const auto logic = to_logic(rhs);
+                if (logic >= 0) {
+                    stack.push_back(logic == 0 ? "1" : "0");
                 } else if (isnum(rhs)) {
                     stack.push_back(std::stod(rhs) == 0 ? "1" : "0");
                 } else {
-                    EMSESP::logger().warning("missing operator");
+                    // usually literal text that was left unquoted, so its '!' got read as a logical NOT
+                    EMSESP::logger().warning("'!' needs a boolean or numeric operand, got '%s'. Literal text must be quoted", rhs.c_str());
                     return "";
                 }
                 break;
@@ -691,96 +689,22 @@ std::string calculate(const std::string & expr) {
     return result;
 }
 
-// perform an HTTP/HTTPS request; returns the HTTP status code (0 on failure or unsupported scheme)
-// the response headers are always stripped, so `result` contains only the body
-int http_request(std::string url, const std::string & method, const std::string & value, JsonObjectConst headers, std::string & result) {
-    int        httpResult = 0;
-    const bool is_post    = value.length() || Helpers::toLower(method) == "post";
-    const auto lower_url  = Helpers::toLower(url.c_str());
-
-    const bool is_https = lower_url.starts_with("https://");
-    if (!is_https && !lower_url.starts_with("http://")) {
-        return 0; // unsupported scheme
+// find the next occurrence of c at or after `from` that is not inside a quoted string, so that
+// literal text like "too hot?" is not mistaken for a ternary. Always scans from the start of the
+// string because the quote state at `from` depends on everything before it.
+static size_t find_unquoted(const std::string & s, char c, size_t from = 0) {
+    bool in_single = false;
+    bool in_double = false;
+    for (size_t i = 0; i < s.length(); i++) {
+        if (!in_single && s[i] == '"') {
+            in_double = !in_double;
+        } else if (!in_double && s[i] == '\'') {
+            in_single = !in_single;
+        } else if (!in_single && !in_double && s[i] == c && i >= from) {
+            return i;
+        }
     }
-
-    WiFiClient *    basic_client = new WiFiClient;
-    ESP_SSLClient * ssl_client   = new ESP_SSLClient;
-    if (is_https) {
-        ssl_client->setInsecure(); // with root CA we should set here: ssl_client->setCACert(rootCACert);
-        // NOTE: 1 KB RX buffer is fine for small JSON-style endpoints used by the scheduler/shunting-yard,
-        // but it is NOT enough for servers that send full-size TLS records (>1 KB), e.g. GitHub release
-        // assets / large CDN responses. Such servers do not negotiate max_fragment_length, so the body
-        // can't be decoded and reads return 0. If this path is ever used to fetch large or CDN-hosted
-        // payloads, bump the RX buffer to 16384 (see uploadFirmwareURL in core/system.cpp for reference).
-        ssl_client->setBufferSizes(1024, 1024);
-        ssl_client->setSessionTimeout(120); // Set the timeout in seconds (>=120 seconds)
-    }
-    ssl_client->setClient(basic_client, is_https); // enableSSL = false for plain HTTP
-
-    url.replace(0, is_https ? 8 : 7, "");
-    std::string host  = url;
-    auto        index = url.find_first_of('/');
-    if (index != std::string::npos) {
-        host = url.substr(0, index);
-        url.replace(0, index, "");
-    } else {
-        url = "/";
-    }
-
-    const uint16_t port = is_https ? 443 : 80;
-    if (ssl_client->connect(host.c_str(), port)) {
-        bool content_set = false;
-        ssl_client->print(is_post ? "POST " : "GET ");
-        ssl_client->print(url.c_str());
-        ssl_client->println(" HTTP/1.1");
-        ssl_client->print("Host: ");
-        ssl_client->println(host.c_str());
-        for (JsonPairConst p : headers) {
-            content_set |= (Helpers::toLower(p.key().c_str()) == "content-type");
-            ssl_client->print(p.key().c_str());
-            ssl_client->print(": ");
-            ssl_client->println(p.value().as<std::string>().c_str());
-        }
-        if (is_post) {
-            if (!content_set) {
-                ssl_client->print("Content-Type: ");
-                ssl_client->println(value.starts_with('{') ? asyncsrv::T_application_json : asyncsrv::T_text_plain);
-            }
-            ssl_client->print("Content-Length: ");
-            ssl_client->println(value.length());
-            ssl_client->println("Connection: close");
-            ssl_client->print("\r\n");
-            ssl_client->print(value.c_str());
-        } else {
-            ssl_client->println("Connection: close");
-            ssl_client->print("\r\n"); // terminate headers - without this the server never responds
-        }
-
-        auto ms = millis();
-        while (ssl_client->connected() && !ssl_client->available() && millis() - ms < 3000) {
-            delay(1);
-        }
-
-        while (ssl_client->available()) {
-            result += (char)ssl_client->read();
-        }
-        ssl_client->stop();
-
-        index = result.find_first_of(' ');
-        if (index != std::string::npos) {
-            httpResult = stoi(result.substr(index + 1, 3));
-        }
-        index = result.find("\r\n\r\n");
-        if (index != std::string::npos) {
-            result.replace(0, index + 4, "");
-        }
-    } else {
-        EMSESP::logger().warning("%s connection failed", is_https ? "HTTPS" : "HTTP");
-    }
-    delete ssl_client;
-    delete basic_client;
-
-    return httpResult;
+    return std::string::npos;
 }
 
 // check for multiple instances of <cond> ? <expr1> : <expr2>
@@ -827,7 +751,7 @@ std::string compute(const std::string & expr) {
             std::string method = doc[method_s] | "GET";
             std::string result;
 
-            int httpResult = http_request(url, method, value, doc[header_s].as<JsonObjectConst>(), result);
+            int httpResult = HttpClient::request(url, method, value, doc[header_s].as<JsonObjectConst>(), result);
             if (httpResult == 200) {
                 std::string  key = doc[key_s] | "";
                 JsonDocument keys_doc; // JsonDocument to hold "keys" after doc is parsed with HTTP body
@@ -866,14 +790,14 @@ std::string compute(const std::string & expr) {
     }
 
     // positions: q-questionmark, c-colon
-    auto q = expr_new.find_first_of('?');
+    auto q = find_unquoted(expr_new, '?');
     while (q != std::string::npos) {
         // find corresponding colon
-        auto c1 = expr_new.find_first_of(':', q + 1);
-        auto q1 = expr_new.find_first_of('?', q + 1);
+        auto c1 = find_unquoted(expr_new, ':', q + 1);
+        auto q1 = find_unquoted(expr_new, '?', q + 1);
         while (q1 < c1 && q1 != std::string::npos && c1 != std::string::npos) {
-            q1 = expr_new.find_first_of('?', q1 + 1);
-            c1 = expr_new.find_first_of(':', c1 + 1);
+            q1 = find_unquoted(expr_new, '?', q1 + 1);
+            c1 = find_unquoted(expr_new, ':', c1 + 1);
         }
         if (c1 == std::string::npos) {
             return ""; // error: missing colon
@@ -904,7 +828,7 @@ std::string compute(const std::string & expr) {
         } else {
             return ""; // error
         }
-        q = expr_new.find_first_of('?'); // search next instance
+        q = find_unquoted(expr_new, '?'); // search next instance
     }
 
     return calculate(expr_new);

src/core/shuntingYard.h

@@ -84,8 +84,6 @@ std::string calculate(const std::string & expr);
 // check for multiple instances of <cond> ? <expr1> : <expr2>
 std::string compute(const std::string & expr);
 
-int http_request(std::string url, const std::string & method, const std::string & value, JsonObjectConst headers, std::string & result);
+} // namespace emsesp
 
-#endif
-
-} // namespace emsesp
+#endif

src/core/system.cpp

@@ -40,9 +40,6 @@
 
 #ifndef EMSESP_STANDALONE
 #define ENABLE_SMTP
-#define USE_ESP_SSLCLIENT
-#define READYCLIENT_SSL_CLIENT ESP_SSLClient
-#define READYCLIENT_TYPE_1 // TYPE 1 when using ESP_SSLClient
 #include <ESP_SSLClient.h>
 #include <ReadyMail.h>
 #endif
@@ -94,6 +91,13 @@ std::vector<uint8_t, AllocatorPSRAM<uint8_t>>                     System::valid_
 std::vector<System::GpioUsage, AllocatorPSRAM<System::GpioUsage>> System::used_gpios_;
 
 #ifndef EMSESP_STANDALONE
+// TLSHandshakeCallback is a C function pointer, so STARTTLS needs a process-wide client slot.
+static ESP_SSLClient * sendmail_ssl_client = nullptr;
+
+static void sendmail_tls_handshake(bool & success) {
+    success = sendmail_ssl_client != nullptr && sendmail_ssl_client->connectSSL();
+}
+
 // The DNS slots are shared between IPv4 and IPv6, so with IPv6 enabled the first slot can hold an
 // IPv6 server. Pick the first IPv4 one so it matches the label we print it under.
 static IPAddress dns_ipv4(const NetworkInterface & netif) {
@@ -146,60 +150,89 @@ bool System::command_sendmail(const char * value, const int8_t) {
     LOG_DEBUG("Command sendmail port %d%s called with '%s'",
               port,
               security == EMAIL_SECURITY::SSL        ? " (SSL)"
-              : security == EMAIL_SECURITY::STARTTLS ? ""
-                                                     : " (STARTTLS)",
+              : security == EMAIL_SECURITY::STARTTLS ? " (STARTTLS)"
+                                                     : " (plain)",
               value);
 
-    bool success = false;
-
-#ifndef EMSESP_STANDALONE
-    WiFiClient *    basic_client = new WiFiClient;
-    ESP_SSLClient * ssl_client   = new ESP_SSLClient;
-    ReadyClient *   r_client     = new ReadyClient(*ssl_client);
-    SMTPClient *    smtp         = new SMTPClient(*r_client);
-
-    ssl_client->setClient(basic_client);
-    ssl_client->setInsecure();
-    ssl_client->setBufferSizes(1024, 1024);
-    r_client->addPort(port,
-                      security == EMAIL_SECURITY::NONE  ? readymail_protocol_plain_text
-                      : security == EMAIL_SECURITY::SSL ? readymail_protocol_ssl
-                                                        : readymail_protocol_tls);
-
-
-    // smtp->connect(server, port, sendmailCallback);
-    smtp->connect(server, port);
-    if (!smtp->isConnected()) {
-        LOG_ERROR("send email connection error");
-        delete smtp;
-        delete r_client;
-        delete ssl_client;
-        delete basic_client;
-        return false;
-    }
-
-    // LOG_INFO("authenticate %s:%s", login.c_str(), pass.c_str());
-    smtp->authenticate(login, pass, readymail_auth_password);
-    if (!smtp->isAuthenticated()) {
-        LOG_ERROR("send email authentication error");
-        delete smtp;
-        delete r_client;
-        delete ssl_client;
-        delete basic_client;
-        return false;
-    }
+    // Resolve the message before opening the SMTP session: compute() can do entity lookups and a
+    // blocking {url} fetch, which would otherwise leave the connection idle long enough to time out.
+    // The value is either a plain body or a JSON envelope overriding the configured subject/to/from.
     JsonDocument doc(PSRAM_DOC);
     String       body = value;
     if (body.length()) {
         auto error = deserializeJson(doc, (const char *)value);
-        if (!error && doc.as<JsonObject>().size() >= 0) {
+        if (!error && doc.is<JsonObject>()) {
             subject = doc["subject"] | subject;
             recp    = doc["to"] | recp;
             sender  = doc["from"] | sender;
             body    = doc["body"] | body;
         }
     }
+    // keep the original body if the calculator returns nothing, so unquoted literal text still gets sent
+    std::string computed_body = compute(body.c_str());
+    if (!computed_body.empty()) {
+        body = computed_body.c_str();
+    }
 
+    bool success = false;
+
+#ifndef EMSESP_STANDALONE
+    // Do not use ReadyClient: after the 220 greeting it calls connectSSL() whenever
+    // STARTTLS is off, so Security=Off still sends a TLS Client Hello on port 25.
+    auto *          basic_client = new WiFiClient;
+    ESP_SSLClient * ssl_client   = nullptr;
+    SMTPClient *    smtp         = nullptr;
+
+    basic_client->setTimeout(5000);
+
+    const bool implicit_ssl = (security == EMAIL_SECURITY::SSL);
+    const bool start_tls    = (security == EMAIL_SECURITY::STARTTLS);
+    const bool tls_enabled  = (security != EMAIL_SECURITY::NONE);
+
+    if (security == EMAIL_SECURITY::NONE) {
+        smtp = new SMTPClient(*basic_client);
+    } else {
+        ssl_client = new ESP_SSLClient;
+        ssl_client->setInsecure();
+        ssl_client->setBufferSizes(16384, 1024);
+        ssl_client->setTimeout(5);
+        // enableSSL is baked in at setClient() — true only for implicit SSL (port 465)
+        ssl_client->setClient(basic_client, implicit_ssl);
+        if (start_tls) {
+            sendmail_ssl_client = ssl_client;
+            smtp                = new SMTPClient(*ssl_client, sendmail_tls_handshake, true);
+        } else {
+            smtp = new SMTPClient(*ssl_client);
+        }
+    }
+
+    auto cleanup = [&]() {
+        delete smtp;
+        sendmail_ssl_client = nullptr;
+        delete ssl_client;
+        delete basic_client;
+    };
+
+    if (!smtp->connect(server, port, String(""), static_cast<SMTPResponseCallback>(nullptr), tls_enabled)) {
+        LOG_ERROR("send email connection error: %s", smtp->status().text.c_str());
+        cleanup();
+        return false;
+    }
+    if (!smtp->isConnected()) {
+        LOG_ERROR("send email connection error: %s", smtp->status().text.c_str());
+        cleanup();
+        return false;
+    }
+
+    // internal/open relays often have no AUTH; empty login means skip it
+    if (!login.isEmpty()) {
+        smtp->authenticate(login, pass, readymail_auth_password);
+        if (!smtp->isAuthenticated()) {
+            LOG_ERROR("send email authentication error: %s", smtp->status().text.c_str());
+            cleanup();
+            return false;
+        }
+    }
     SMTPMessage & msg = smtp->getMessage();
     msg.headers.add(rfc822_subject, subject);
     msg.headers.add(rfc822_from, sender);
@@ -209,12 +242,6 @@ bool System::command_sendmail(const char * value, const int8_t) {
     // msg.headers.addCustom("Importance", PRIORITY);
     // msg.headers.addCustom("X-MSMail-Priority", PRIORITY);
     // msg.headers.addCustom("X-Priority", PRIORITY_NUM);
-    // run the body through the Shunting Yard calculator (entity substitution, expressions, optional {url} fetch)
-    // keep the original body if the calculator returns nothing
-    std::string computed_body = compute(body.c_str());
-    if (!computed_body.empty()) {
-        body = computed_body.c_str();
-    }
     msg.text.body(body);
 
     // bodyText.replace("\r\n", "<br>\r\n");
@@ -228,11 +255,11 @@ bool System::command_sendmail(const char * value, const int8_t) {
     msg.timestamp = time(nullptr);
 
     success = smtp->send(msg);
+    if (!success) {
+        LOG_ERROR("send email failed: %s", smtp->status().text.c_str());
+    }
 
-    delete smtp;
-    delete r_client;
-    delete ssl_client;
-    delete basic_client;
+    cleanup();
 #endif
     return success;
 }
@@ -586,7 +613,7 @@ void System::system_restart(const char * partitionname) {
     }
     Serial.flush(); // wait for hardware TX buffer to drain
 
-    Mqtt::disconnect(); // gracefully disconnect MQTT, needed for QOS1
+    Mqtt::disconnect(); // gracefully disconnect MQTT (flushes the DISCONNECT before reboot, needed for QOS1)
     EMSuart::stop();    // stop UART so there is no interference
 #ifndef EMSESP_STANDALONE
     delay(1000);   // wait 1 second
@@ -840,7 +867,7 @@ bool System::loop() {
 void System::send_info_mqtt() {
     static uint8_t _connection = 0;
     uint8_t        connection  = (EMSESP::network_.ethernet_connected() ? 1 : 0) + (EMSESP::network_.wifi_connected() ? 2 : 0) + (ntp_connected_ ? 4 : 0)
-                         + (EMSESP::network_.has_ipv6() ? 8 : 0);
+                                 + (EMSESP::network_.has_ipv6() ? 8 : 0);
     // check if connection status has changed
     if (!Mqtt::connected() || connection == _connection) {
         return;
@@ -853,7 +880,7 @@ void System::send_info_mqtt() {
 
     // if NTP is enabled send the boot_time in local time in ISO 8601 format (eg: 2022-11-15 20:46:38)
     // https://github.com/emsesp/EMS-ESP32/issues/751
-    if (ntp_connected_) {
+    if (time(nullptr) > 1500000000L) {
         char   time_string[25];
         time_t now = time(nullptr) - uuid::get_uptime_sec();
         strftime(time_string, 25, "%FT%T%z", localtime(&now));
@@ -1065,6 +1092,7 @@ void System::show_system(uuid::console::Shell & shell) {
     shell.println();
     shell.println("System:");
     shell.printfln(" Version: %s", EMSESP_APP_VERSION);
+    shell.printfln(" System name: %s", system_name_.c_str());
 #ifndef EMSESP_STANDALONE
     shell.printfln(" Platform: %s (%s)", EMSESP_PLATFORM, ESP.getChipModel());
     shell.printfln(" Model: %s", getBBQKeesGatewayDetails().c_str());
@@ -1545,7 +1573,7 @@ bool System::check_upgrade() {
             EMSESP::esp32React.getAPSettingsService()->update([&](APSettings & apSettings) {
                 if (apSettings.provisionMode == 0) {
                     apSettings.provisionMode = AP_MODE_DISCONNECTED; // AP_MODE_DISCONNECTED is the new default
-                    LOG_INFO("Upgrade: Setting AP provision mode to auto");
+                    LOG_INFO("Upgrade: Setting AP provision mode to on disconnect");
                     return StateUpdateResult::CHANGED;
                 }
                 return StateUpdateResult::UNCHANGED;
@@ -1951,24 +1979,6 @@ bool System::command_service(const char * cmd, const char * value) {
         }
     }
 
-    int n;
-    if (!ok && Helpers::value2number(value, n)) {
-#ifndef EMSESP_STANDALONE
-        if (!strcmp(cmd, "fuse/mfg")) {
-            ok = esp_efuse_write_reg(EFUSE_BLK3, 0, (uint32_t)n) == ESP_OK;
-            ok ? LOG_INFO("fuse programed with value '%X': successful", n) : LOG_ERROR("fuse programed with value '%X': failed", n);
-        }
-        if (!strcmp(cmd, "fuse/mfgadd")) {
-            uint8_t reg = 0;
-            while (esp_efuse_read_reg(EFUSE_BLK3, reg) != 0 && reg < 7)
-                reg++;
-            ok = esp_efuse_write_reg(EFUSE_BLK3, reg, (uint32_t)n) == ESP_OK;
-            ok ? LOG_INFO("fuse %d programed with value '%X': successful", reg, n) : LOG_ERROR("fuse %d programed with value '%X': failed", reg, n);
-            return true;
-        }
-#endif
-    }
-
     if (ok) {
         LOG_INFO("System command '%s' with value '%s'", cmd, value);
     }
@@ -2795,6 +2805,9 @@ bool System::load_board_profile(std::vector<int8_t> & data, const std::string &
         // https://github.com/OLIMEX/ESP32-POE/blob/master/HARDWARE/ESP32-PoE-hardware-revision-L1/ESP32-PoE_Rev_L1.pdf
         // uart0 = 1, 3; SD-card = 2, 14, 15; button = 34;
         valid_system_gpios_ = {4, 34, 36, 12, 13, 21, 22, 25, 26, 27, 32, 33, 39};
+    } else if (board_profile == "OLIMEXPOEW") {
+        data                = {0, 0, 36, 4, 34, PHY_type::PHY_TYPE_LAN8720, 12, 0, 1, 0}; // Olimex ESP32-POE-ISO WROVER (PSRAM)
+        valid_system_gpios_ = {4, 34, 36, 12, 13, 21, 22, 25, 26, 27, 32, 33, 39};
     } else if (board_profile == "C3MINI") {
 #if defined(BOARD_C3_MINI_V1)
         data = {7, 1, 4, 5, 9, PHY_type::PHY_TYPE_NONE, 0, 0, 0, 0}; // Lolin C3 Mini V1
@@ -2887,7 +2900,7 @@ bool System::command_txpause(const char * value, const int8_t) {
     return true;
 }
 
-// format command - factory reset, removing all config files
+// format command - factory reset, removing all settings files
 bool System::command_format(const char * value, const int8_t id) {
     if (EMSESP::system_.disable_reset()) {
         LOG_NOTICE("Factory reset disabled");
@@ -2897,7 +2910,7 @@ bool System::command_format(const char * value, const int8_t id) {
 #if !defined(EMSESP_STANDALONE) && !defined(EMSESP_TEST)
     // don't really format the filesystem in test or standalone mode
     if (LittleFS.format()) {
-        LOG_INFO("Filesystem formatted successfully. All config files removed.");
+        LOG_INFO("Filesystem formatted successfully. All settings files removed.");
     } else {
         LOG_ERROR("Format failed");
     }
@@ -2920,7 +2933,7 @@ bool System::command_restart(const char * value, const int8_t id) {
         return true;
     }
 
-    LOG_INFO("Restarting system immediately");
+    LOG_INFO("Restarting system...");
     // restart will be handled by the main loop
     EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_RESTART_REQUESTED);
     return true;
@@ -3108,7 +3121,7 @@ bool System::uploadFirmwareURL(const char * url) {
         ssl_client.setSessionTimeout(120);
     }
     basic_client.setTimeout(15000);                // socket-level read timeout
-    ssl_client.setTimeout(15000);                  // Stream::readBytes timeout used by Update
+    ssl_client.setTimeout(15);                     // Stream::readBytes timeout used by Update
     ssl_client.setClient(&basic_client, is_https); // enableSSL = false for plain HTTP
 
     const uint16_t port           = is_https ? 443 : 80;
@@ -3248,7 +3261,7 @@ bool System::uploadFirmwareURL(const char * url) {
         return false; // error
     }
 
-    LOG_INFO("Firmware uploading (size: %d KB) over %s. Please wait...", firmware_size / 1024, is_https ? "HTTPS" : "HTTP");
+    LOG_INFO("Firmware uploading (size: %dKB) over %s. Please wait...", firmware_size / 1024, is_https ? "HTTPS" : "HTTP");
 
     Shell::loop_all(); // flush log buffers so latest messages are shown in console
 

src/core/temperaturesensor.cpp

@@ -45,17 +45,20 @@ void TemperatureSensor::start(const bool factory_settings) {
     Mqtt::subscribe(EMSdevice::DeviceType::TEMPERATURESENSOR, topic, nullptr); // use empty function callback
 }
 
+void TemperatureSensor::ha_reset() {
+    for (auto & sensor : sensors_) {
+        remove_ha_topic(sensor.id());
+        sensor.ha_registered = false; // force HA configs to be re-created
+    }
+}
+
 // load settings
 void TemperatureSensor::reload() {
     EMSESP::webSettingsService.read([&](WebSettings const & settings) {
         dallas_gpio_ = settings.dallas_gpio;
         parasite_    = settings.dallas_parasite;
     });
-
-    for (auto & sensor : sensors_) {
-        remove_ha_topic(sensor.id());
-        sensor.ha_registered = false; // force HA configs to be re-created
-    }
+    ha_reset();
 }
 
 void TemperatureSensor::loop() {
@@ -543,7 +546,7 @@ void TemperatureSensor::publish_values(const bool force) {
                 // for the value template, there's a problem still with Domoticz probably due to the special characters.
                 // See https://github.com/emsesp/EMS-ESP32/issues/1360
                 if (Mqtt::discovery_type() == Mqtt::discoveryType::HOMEASSISTANT) {
-                    config["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + " else -55}}";
+                    config["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + " else 'None'}}";
                 } else {
                     config["val_tpl"] = (std::string) "{{" + val_obj + "}}"; // omit value conditional Jinja2 template code
                 }

src/core/temperaturesensor.h

@@ -93,6 +93,7 @@ class TemperatureSensor {
     void publish_sensor(const Sensor & sensor);
     void publish_values(const bool force);
     void reload();
+    void ha_reset();
     bool updated_values();
     bool get_value_info(JsonObject output, const char * cmd, const int8_t id = -1);
 

src/devices/boiler.cpp

@@ -220,13 +220,13 @@ Boiler::Boiler(uint8_t device_type, int8_t device_id, uint8_t product_id, const
         register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &fanWork_, DeviceValueType::BOOL, FL_(fanWork), DeviceValueUOM::NONE);
         register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &ignWork_, DeviceValueType::BOOL, FL_(ignWork), DeviceValueUOM::NONE);
         register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &oilPreHeat_, DeviceValueType::BOOL, FL_(oilPreHeat), DeviceValueUOM::NONE);
-        // remove burnMinPower, #2918
-        // register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
-        //                      &burnMinPower_,
-        //                       DeviceValueType::UINT8,
-        //                       FL_(burnMinPower),
-        //                       DeviceValueUOM::PERCENT,
-        //                       MAKE_CF_CB(set_min_power));
+        // remove burnMinPower, #2918, add back for 0xE6, #3193
+        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                              &burnMinPower_,
+                              DeviceValueType::UINT8,
+                              FL_(burnMinPower),
+                              DeviceValueUOM::PERCENT,
+                              MAKE_CF_CB(set_min_power));
         register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
                               &burnMaxPower_,
                               DeviceValueType::UINT8,
@@ -1622,7 +1622,7 @@ void Boiler::process_UBAParametersPlus(const std::shared_ptr<const Telegram> & t
     has_update(telegram, heatingActivated_, 0);
     has_update(telegram, heatingTemp_, 1);
     has_update(telegram, burnMaxPower_, 4);
-    // has_update(telegram, burnMinPower_, 5); // removed #2918
+    has_update(telegram, burnMinPower_, 5); // removed #2918
     has_update(telegram, boilHystOff_, 8);
     has_update(telegram, boilHystOn_, 9);
     has_update(telegram, burnMinPeriod_, 10);

src/devices/solar.cpp

@@ -935,7 +935,7 @@ bool Solar::set_heatTransferSystem(const char * value, const int8_t id) {
     if (!Helpers::value2bool(value, b)) {
         return false;
     }
-    write_command(0x358, 5, b ? 0x01 : 0x00, 0x358);
+    write_command(0x358, 5, b ? 0xFF : 0x00); // change is broadcasted
     return true;
 }
 
@@ -945,7 +945,7 @@ bool Solar::set_externalCyl(const char * value, const int8_t id) {
     if (!Helpers::value2bool(value, b)) {
         return false;
     }
-    write_command(0x358, 9, b ? 0x01 : 0x00, 0x358);
+    write_command(0x358, 9, b ? 0xFF : 0x00); // change is broadcasted
     return true;
 }
 
@@ -955,7 +955,7 @@ bool Solar::set_thermalDisinfect(const char * value, const int8_t id) {
     if (!Helpers::value2bool(value, b)) {
         return false;
     }
-    write_command(0x358, 10, b ? 0x01 : 0x00, 0x358);
+    write_command(0x358, 10, b ? 0xFF : 0x00); // change is broadcasted
     return true;
 }
 
@@ -965,7 +965,7 @@ bool Solar::set_heatMetering(const char * value, const int8_t id) {
     if (!Helpers::value2bool(value, b)) {
         return false;
     }
-    write_command(0x358, 14, b ? 0x01 : 0x00, 0x358);
+    write_command(0x358, 14, b ? 0xFF : 0x00); // change is broadcasted
     return true;
 }
 
@@ -978,7 +978,7 @@ bool Solar::set_solarEnabled(const char * value, const int8_t id) {
     if (flags() == EMSdevice::EMS_DEVICE_FLAG_SM10) {
         write_command(0x96, 0, b ? 0xFF : 0x00, 0x96);
     } else {
-        write_command(0x358, 19, b ? 0x01 : 0x00, 0x358);
+        write_command(0x358, 19, b ? 0xFF : 0x00); // change is broadcasted
     }
     return true;
 }

src/devices/thermostat.cpp

@@ -2401,7 +2401,7 @@ bool Thermostat::set_control(const char * value, const int8_t id) {
         }
         // BC400
         // 1-RC100, 2-RC100H, 3-RC200
-    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400) {
         if (Helpers::value2enum(value, ctrl, FL_(enum_control2))) {
             write_command(hpmode_typeids[hc->hc()], 3, ctrl);
             hc->control = ctrl; // set in advance, dont wait for verify
@@ -2421,6 +2421,20 @@ bool Thermostat::set_control(const char * value, const int8_t id) {
             }
             return true;
         }
+    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        if (Helpers::value2enum(value, ctrl, FL_(enum_control3))) {
+            write_command(hpmode_typeids[hc->hc()], 3, ctrl);
+            hc->control = ctrl; // set in advance, dont wait for verify
+            if (hc->remotetemp != EMS_VALUE_INT16_NOTSET && ctrl > 0) {
+                if (ctrl == 6) {
+                    Roomctrl::set_remotetemp(Roomctrl::RT800, hc->hc(), hc->remotetemp);
+                } else {
+                    hc->remotetemp = EMS_VALUE_INT16_NOTSET;
+                    Roomctrl::set_remotetemp(0, hc->hc(), hc->remotetemp);
+                }
+            }
+            return true;
+        }
         // RC100 or RC300
         // 1-RC200, 2-RC100, 3-RC100H
     } else if (isRC300() || model() == EMSdevice::EMS_DEVICE_FLAG_RC100) {
@@ -4701,7 +4715,7 @@ void Thermostat::register_device_values() {
                                   1,
                                   10);
             register_device_value(
-                DeviceValueTAG::TAG_DEVICE_DATA, &coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
+                DeviceValueTAG::TAG_DEVICE_DATA, &coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 24, 35);
             register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
                                   &heatondelay,
                                   DeviceValueType::UINT8,

src/emsesp_version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.9.0-dev.1"
+#define EMSESP_APP_VERSION "3.9.0-dev.8"

src/web/WebCommandService.cpp

@@ -20,6 +20,7 @@
 #include "WebCommandService.h"
 
 #include "shuntingYard.h"
+#include "httpClient.h"
 
 namespace emsesp {
 
@@ -99,6 +100,13 @@ bool WebCommandService::isUrlCommand(const std::string & command) {
     return lower_url.starts_with("http://") || lower_url.starts_with("https://");
 }
 
+// true if the command runs the shunting-yard on its own argument. Those values must be passed
+// through raw: a first pass strips the quotes from literal text, so the command's own pass then
+// re-parses that text as an expression and chokes on characters like '!' or drops the spaces.
+bool WebCommandService::computesOwnValue(const std::string & cmd) {
+    return cmd == "system/message" || cmd == "system/sendmail";
+}
+
 // true if a value expression contains an embedded {"url":...} JSON snippet, which compute()
 // will resolve with a blocking HTTP request. Mirrors the scan compute() does in shuntingYard.cpp
 bool WebCommandService::valueContainsUrl(const std::string & value) {
@@ -238,13 +246,13 @@ bool WebCommandService::executeCommand(const char * name, const std::string & co
     // run the value through the shunting-yard calculator so expressions like "custom/heatcnt + 1"
     // are resolved (entity references replaced by their values, then computed). Plain values pass
     // through unchanged. Applies to both URL and internal commands, like the old scheduler code
-    // which computed the value before executing. system/message runs the shunting-yard on its own
-    // argument, so pre-computing it here would run it twice - pass it through raw.
+    // which computed the value before executing. Commands that compute their own argument are
+    // skipped here so the value is only ever evaluated once.
     std::string computed_data = data;
-    if (!data.empty() && cmd != "system/message") {
+    if (!data.empty() && !computesOwnValue(cmd)) {
         computed_data = compute(data);
         if (computed_data.empty()) {
-            EMSESP::logger().warning("Command '%s': cannot compute value '%s'", name, data.c_str());
+            EMSESP::logger().warning("Command '%s': cannot compute value '%s'. Literal text must be quoted", name, data.c_str());
             return false;
         }
     }
@@ -267,7 +275,7 @@ bool WebCommandService::executeCommand(const char * name, const std::string & co
         auto lower_url = Helpers::toLower(url.c_str());
         if (lower_url.starts_with("http://") || lower_url.starts_with("https://")) {
             std::string result;
-            int         httpResult = http_request(url, method, value, doc["header"].as<JsonObjectConst>(), result);
+            int         httpResult = HttpClient::request(url, method, value, doc["header"].as<JsonObjectConst>(), result);
             if (httpResult != 200) {
                 EMSESP::logger().warning("Command '%s': URL command failed with http code %d", name, httpResult);
                 return false;

src/web/WebCommandService.h

@@ -85,6 +85,7 @@ class WebCommandService : public StatefulService<WebCommands> {
 
     static bool isUrlCommand(const std::string & command);   // true if the command definition is a HTTP/URL command
     static bool valueContainsUrl(const std::string & value); // true if a value embeds a {"url":...} compute() will fetch
+    static bool computesOwnValue(const std::string & cmd);   // true if the command runs the shunting-yard itself
 
     const CommandItem * find(const char * name);
 

src/web/WebCustomEntityService.cpp

@@ -501,7 +501,7 @@ void WebCustomEntityService::publish(const bool force) {
             snprintf(val_cond, sizeof(val_cond), "%s is defined", val_obj);
             // don't bother with value template conditions if using Domoticz which doesn't fully support MQTT Discovery
             if (Mqtt::discovery_type() == Mqtt::discoveryType::HOMEASSISTANT) {
-                config["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + "}}";
+                config["val_tpl"] = (std::string) "{{" + val_obj + " if " + val_cond + " else 'None'}}";
             } else {
                 config["val_tpl"] = (std::string) "{{" + val_obj + "}}";
             }

src/web/WebCustomizationService.cpp

@@ -317,7 +317,7 @@ void WebCustomizationService::customization_entities(AsyncWebServerRequest * req
 
                     // add deleted entities from file
                     read([&](WebCustomization & settings) {
-                        for (EntityCustomization entityCustomization : settings.entityCustomizations) {
+                        for (const auto & entityCustomization : settings.entityCustomizations) {
                             if (entityCustomization.device_id == device_id) {
                                 for (const auto & entity_id : entityCustomization.entity_ids) {
                                     uint8_t     mask = Helpers::hextoint(entity_id.substr(0, 2).c_str());

src/web/WebSchedulerService.cpp

@@ -275,7 +275,7 @@ void WebSchedulerService::publish(const bool force) {
 
                 char val_tpl[150];
                 if (Mqtt::discovery_type() == Mqtt::discoveryType::HOMEASSISTANT) {
-                    snprintf(val_tpl, sizeof(val_tpl), "{{%s if %s}}", val_obj, val_cond);
+                    snprintf(val_tpl, sizeof(val_tpl), "{{%s if %s else 'None'}}", val_obj, val_cond);
                 } else {
                     snprintf(val_tpl, sizeof(val_tpl), "{{%s}}", val_obj); // omit value conditional Jinja2 template code
                 }

src/web/WebSettingsService.cpp

@@ -316,8 +316,9 @@ StateUpdateResult WebSettings::update(JsonObject root, WebSettings & settings) {
     settings.weblog_level   = root["weblog_level"] | EMSESP_DEFAULT_WEBLOG_LEVEL;
     settings.weblog_compact = root["weblog_compact"] | EMSESP_DEFAULT_WEBLOG_COMPACT;
 
-    settings.email_enabled  = root["email_enabled"] | FACTORY_EMAIL_ENABLE;
-    settings.email_security = root["email_security"] | FACTORY_EMAIL_SECURITY;
+    settings.email_enabled = root["email_enabled"] | FACTORY_EMAIL_ENABLE;
+    // Off is 0, so `| FACTORY_EMAIL_SECURITY` would replace it with STARTTLS (2)
+    settings.email_security = root["email_security"].isNull() ? FACTORY_EMAIL_SECURITY : root["email_security"].as<uint8_t>();
     settings.email_server   = root["email_server"] | FACTORY_EMAIL_SERVER;
     settings.email_port     = root["email_port"] | FACTORY_EMAIL_PORT;
     settings.email_login    = root["email_login"] | FACTORY_EMAIL_LOGIN;

src/web/WebStatusService.cpp

@@ -20,9 +20,8 @@
 
 #ifndef EMSESP_STANDALONE
 #include <esp_ota_ops.h>
-#include <WiFiClient.h>
-#include <ESP_SSLClient.h>
 #endif
+#include "httpClient.h"
 
 namespace emsesp {
 
@@ -320,12 +319,15 @@ uint8_t WebStatusService::upgradeImportantMessages(std::string & version) {
 }
 
 // action = getVersions
-// returns the device's current version for dev and stable
+// returns the device's current version for dev and stable, plus the system name
 // The remote fetch runs from the main loop task via WebStatusService::loop() so that we never block the AsyncTCP callback
 void WebStatusService::getVersions(JsonObject root) {
     FirmwareVersion current_version(current_version_s);
     bool            is_dev = current_version.prerelease().find("dev") != std::string::npos;
 
+    // the WebUI shows this in the menu drawer. It's included here because this action is called once after login
+    root["system_name"] = EMSESP::system_.system_name();
+
     JsonObject current     = root["current"].to<JsonObject>();
     current["version"]     = current_version_s;
     current["type"]        = is_dev ? "dev" : "stable";
@@ -421,94 +423,17 @@ bool WebStatusService::refresh_versions_cache() {
 #ifdef EMSESP_STANDALONE
     return false;
 #else
-    // detect scheme from EMSESP_VERSIONS_URL (case-insensitive). One code path for HTTP and HTTPS,
-    // using ESP_SSLClient as a plain TCP passthrough when SSL is disabled.
-    String url   = EMSESP_VERSIONS_URL;
-    String lower = url;
-    lower.toLowerCase();
-    const bool is_https = lower.startsWith("https://");
-    if (!is_https && !lower.startsWith("http://")) {
-#if defined(EMSESP_DEBUG)
-        EMSESP::logger().debug("versions.json: unsupported scheme");
-#endif
-        return false;
-    }
-    const int scheme_len = is_https ? 8 : 7;
-
-    WiFiClient    basic_client;
-    ESP_SSLClient ssl_client;
-    if (is_https) {
-        ssl_client.setInsecure();
-        ssl_client.setBufferSizes(16384, 1024); // versions.json fits easily but TLS records may be full-size
-        ssl_client.setSessionTimeout(120);
-    }
-    basic_client.setTimeout(5000);
-    ssl_client.setTimeout(5000);
-    ssl_client.setClient(&basic_client, is_https);
-
-    // split into host and path
-    String rest = url.substring(scheme_len);
-    String host;
-    String path;
-    int    s = rest.indexOf('/');
-    if (s < 0) {
-        host = rest;
-        path = "/";
-    } else {
-        host = rest.substring(0, s);
-        path = rest.substring(s);
-    }
-
-    if (!ssl_client.connect(host.c_str(), is_https ? 443 : 80)) {
-#if defined(EMSESP_DEBUG)
-        EMSESP::logger().debug("versions.json: connection failed");
-#endif
-        return false;
-    }
-
-    // minimal HTTP/1.0 GET so we don't have to handle chunked encoding
-    ssl_client.print("GET ");
-    ssl_client.print(path);
-    ssl_client.println(" HTTP/1.0");
-    ssl_client.print("Host: ");
-    ssl_client.println(host);
-    ssl_client.println("User-Agent: EMS-ESP");
-    ssl_client.println("Connection: close");
-    ssl_client.print("\r\n");
-
-    // wait for the first byte. The 5 seconds is GitHub's SLO
-    uint32_t ms = millis();
-    while (ssl_client.connected() && !ssl_client.available() && millis() - ms < 5000) {
-        delay(1);
-    }
-
-    // parse status line
-    String status_line = ssl_client.readStringUntil('\n');
-    int    sp          = status_line.indexOf(' ');
-    int    http_code   = (sp >= 0) ? status_line.substring(sp + 1, sp + 4).toInt() : 0;
+    std::string  result;
+    JsonDocument doc;
+    auto         http_code = HttpClient::request(VERSIONS_URL, "GET", "", doc.as<JsonObjectConst>(), result);
     if (http_code != 200) {
-        ssl_client.stop();
-#if defined(EMSESP_DEBUG)
-        EMSESP::logger().debug("versions.json: HTTP error code %d", http_code);
-#endif
+        EMSESP::logger().warning("Unable to retrieve online version information (HTTP error code %d)", http_code);
         return false;
     }
-
-    // skip headers
-    while (ssl_client.connected() || ssl_client.available()) {
-        String line = ssl_client.readStringUntil('\n');
-        line.trim();
-        if (line.isEmpty()) {
-            break;
-        }
-    }
-
-    JsonDocument         doc(PSRAM_DOC);
-    DeserializationError err = deserializeJson(doc, ssl_client);
-    ssl_client.stop();
+    DeserializationError err = deserializeJson(doc, result);
     if (err) {
 #if defined(EMSESP_DEBUG)
-        EMSESP::logger().debug("versions.json: parse error");
+        EMSESP::logger().debug("refresh_versions_cache() parse error");
 #endif
         return false;
     }
@@ -531,7 +456,8 @@ bool WebStatusService::refresh_versions_cache() {
 
     versions_cache_valid_ = true;
 #if defined(EMSESP_DEBUG)
-    EMSESP::logger().debug("versions.json: fetched stable=%s, dev=%s, current=%s",
+    EMSESP::logger().debug("Fetched from %s: stable=%s, dev=%s, current=%s",
+                           VERSIONS_URL,
                            versions_stable_.version.c_str(),
                            versions_dev_.version.c_str(),
                            current_version_s.c_str());

src/web/WebStatusService.h

@@ -4,8 +4,6 @@
 #define EMSESP_SYSTEM_STATUS_SERVICE_PATH "/rest/systemStatus"
 #define EMSESP_ACTION_SERVICE_PATH "/rest/action"
 
-#define EMSESP_VERSIONS_URL "http://emsesp.org/versions.json"
-
 #include "../core/firmwareVersion.h"
 #include "../emsesp_version.h"
 
@@ -72,6 +70,8 @@ class WebStatusService {
 
     bool refresh_versions_cache(); // does the actual HTTPS fetch + parse, returns true on success
 
+    static constexpr const char * VERSIONS_URL = "http://emsesp.org/versions.json";
+
     static constexpr uint32_t VERSIONS_REFRESH_INTERVAL_MS    = 60UL * 60UL * 1000UL; // 1 hour on success
     static constexpr uint32_t VERSIONS_RETRY_INTERVAL_MS      = 5UL * 60UL * 1000UL;  // 5 min after failure
     static constexpr uint32_t VERSIONS_INITIAL_FETCH_DELAY_MS = 5UL * 1000UL;         // 5 s after a link comes up

test/test_api/test_shuntingYard.h

@@ -120,6 +120,31 @@ void shuntingYard_test28() {
     run_shuntingYard_test("", "-x");
 }
 
+// quoted text keeps its spaces and punctuation, unquoted text does not
+void shuntingYard_test29() {
+    run_shuntingYard_test("email test!", "\"email test!\"");
+}
+
+// a trailing '!' on unquoted text is read as a logical NOT and has no valid operand
+void shuntingYard_test30() {
+    run_shuntingYard_test("", "email test!");
+}
+
+// computing an already computed value is lossy - callers must run compute() only once
+void shuntingYard_test31() {
+    run_shuntingYard_test("", emsesp::compute("\"email test!\""));
+}
+
+// a '?' inside quotes is literal text, not a ternary
+void shuntingYard_test32() {
+    run_shuntingYard_test("Is it hot?", "\"Is it hot?\"");
+}
+
+// mixing quoted text with entity values keeps the punctuation of both parts
+void shuntingYard_test33() {
+    run_shuntingYard_test("temp is 40 C!", "\"temp is \" + boiler/flowtempoffset + \" C!\"");
+}
+
 void run_shuntingYard_tests() {
     RUN_TEST(shuntingYard_test1);
     RUN_TEST(shuntingYard_test2);
@@ -149,4 +174,9 @@ void run_shuntingYard_tests() {
     RUN_TEST(shuntingYard_test26);
     RUN_TEST(shuntingYard_test27);
     RUN_TEST(shuntingYard_test28);
+    RUN_TEST(shuntingYard_test29);
+    RUN_TEST(shuntingYard_test30);
+    RUN_TEST(shuntingYard_test31);
+    RUN_TEST(shuntingYard_test32);
+    RUN_TEST(shuntingYard_test33);
 }