3.8.6

support newer rgb WS2812B V6 leds
2026-10-28 11:14:58 +00:00 · 2026-09-24 20:39:05 +02:00 · 2026-09-24 18:41:08 +02:00 · 2026-09-24 18:40:48 +02:00 · 2026-09-22 22:33:06 +02:00 · 2026-09-22 22:18:40 +02:00
72 changed files with 2089 additions and 1977 deletions
@@ -5,6 +5,58 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

+
+## [3.8.6] 24 September 2026
+
+## Added
+
+- own rgb_led library supporting WS2812B V5 and the newer V6 RGB LEDs
+
+## [3.8.5] 22 September 2026
+
+## Added
+
+- Change webUI message when upgrading to a major version of the firmware, in preparation for the upcoming 3.9.0 release.
+
+## [3.8.4] 4 August 2026
+
+## Fixed
+
+- Allow auto-download and install of firmware versions which are smaller to allow update to the latest 3.9.0-development version.
+
+## Changed
+
+## [3.8.3] 1 August 2026
+
+## Added
+
+- KM300 at address 0x4A [#3084](https://github.com/emsesp/EMS-ESP32/issues/3084)
+
+## Fixed
+
+- signed value for solarInfuence [#3077](https://github.com/emsesp/EMS-ESP32/issues/3077)
+- set bin file upload limit to 1M again [#3086](https://github.com/emsesp/EMS-ESP32/issues/3086)
+- check arithmetric operations on strings [#3127](https://github.com/emsesp/EMS-ESP32/discussions/3127)
+- prevent system crash during WiFi network discovery on ESP32-S3 hardware [#3128](https://github.com/emsesp/EMS-ESP32/pull/3128)
+- fix setting date/time on Junkers thermostats
+- offset of hpminflowtemp [#3144](https://github.com/emsesp/EMS-ESP32/issues/3144)
+- water circulation command [#3149](https://github.com/emsesp/EMS-ESP32/pull/3149)
+- start scheduler after customEntities, delay scheduler loop after startup, handling of `system/restart` command [#3146](https://github.com/emsesp/EMS-ESP32/issues/3146)
+- possible memory leaks fixed.
+- repeated startup schedules compute value
+- call `system/message` called from scheduler processes compute twice
+- water module SM100/200 as dhw1/dhw2 [#3164](https://github.com/emsesp/EMS-ESP32/issues/3164)
+
+## Changed
+
+- call compute value direct, enlarge TCP stack [#3127](https://github.com/emsesp/EMS-ESP32/discussions/3127)
+- Dewtemperature for Easycontrol calculated by ems-esp [#3135](https://github.com/emsesp/EMS-ESP32/issues/3135)
+- add option for sync thermostat to ntp, allow different time zones [#3148](https://github.com/emsesp/EMS-ESP32/discussions/3148), **defaults to sync**.
+- block too many GET requests [mentioned in #3104](https://github.com/emsesp/EMS-ESP32/issues/3104)
+- set 10 sec timeout for http requests [#3104](https://github.com/emsesp/EMS-ESP32/issues/3104)
+- language code "cs" [#3161](https://github.com/emsesp/EMS-ESP32/issues/3161)
+
+
 ## [3.8.2] 12 May 2026

 ## Added
@@ -2,12 +2,8 @@

 For more details go to [emsesp.org](https://emsesp.org/).

-## [3.8.3]
-
 ## Added

 ## Fixed

 ## Changed
-
-
@@ -5363,22 +5363,22 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
-uint8
-| hc1.solarinfl | solar influence | uint8 (&gt;=-5&lt;=4294967295) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | uint8 | C | false | HC | 58 | 1 | 1/10 |
+int8
+| hc1.solarinfl | solar influence | int8 (&gt;=-5&lt;=0) | C | true | HC | 57 | 1 | 1 |
+| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
 | hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
 | hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
 uint8
@@ -5972,22 +5972,22 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
-uint8
-| hc1.solarinfl | solar influence | uint8 (&gt;=-5&lt;=4294967295) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | uint8 | C | false | HC | 58 | 1 | 1/10 |
+int8
+| hc1.solarinfl | solar influence | int8 (&gt;=-5&lt;=0) | C | true | HC | 57 | 1 | 1 |
+| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
 | hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
 | hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
 uint8
@@ -6124,22 +6124,22 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
-uint8
-| hc1.solarinfl | solar influence | uint8 (&gt;=-5&lt;=4294967295) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | uint8 | C | false | HC | 58 | 1 | 1/10 |
+int8
+| hc1.solarinfl | solar influence | int8 (&gt;=-5&lt;=0) | C | true | HC | 57 | 1 | 1 |
+| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
 | hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
 | hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
 uint8
@@ -6291,22 +6291,22 @@ uint8
 uint8
 | hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
 uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
+| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 49 | 1 | 1 |
 uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
+| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 50 | 1 | 1 |
+uint8
+| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 51 | 1 | 1 |
 uint8
 | hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
-uint8
-| hc1.solarinfl | solar influence | uint8 (&gt;=-5&lt;=4294967295) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | uint8 | C | false | HC | 58 | 1 | 1/10 |
+int8
+| hc1.solarinfl | solar influence | int8 (&gt;=-5&lt;=0) | C | true | HC | 57 | 1 | 1 |
+| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
 | hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
 | hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
 uint8
@@ -6410,6 +6410,21 @@ int8
 int8
 | pvlowercool | lower cooling with PV | int8 (&gt;=-5&lt;=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
 | absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
+| hpoperatingmode | heatpump operating mode | enum |   | true | DEVICE_DATA | 89 | 1 | 1 |
+uint8
+| summertemp | summer temperature | uint8 (&gt;=10&lt;=30) | C | true | DEVICE_DATA | 90 | 1 | 1 |
+uint8
+| instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | DEVICE_DATA | 91 | 1 | 1 |
+uint8
+| coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | DEVICE_DATA | 92 | 1 | 1 |
+uint8
+| heatondelay | heat-on delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 93 | 1 | 1/4 |
+uint8
+| heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 94 | 1 | 1/4 |
+uint8
+| coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 95 | 1 | 1/4 |
+uint8
+| cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | DEVICE_DATA | 96 | 1 | 1/4 |
 int16
 | hc1.seltemp | selected room temperature | int16 (&gt;=0&lt;=30) | C | true | HC | 0 | 1 | 1/2 |
 | hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
@@ -6480,27 +6495,15 @@ uint8
 | hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
 | hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
 | hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
+| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
 uint8
-| hc1.heatondelay | heat-on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (&gt;=1&lt;=10) | K | true | HC | 49 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (&gt;=20&lt;=35) | C | true | HC | 52 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (&gt;=1&lt;=48) | hours | true | HC | 54 | 1 | 1 |
+| hc1.boosttime | boost time | uint8 (&gt;=0&lt;=0) | hours | true | HC | 54 | 1 | 1 |
 | hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
 int8
 | hc1.redthreshold | reduction threshold | int8 (&gt;=12&lt;=22) | C | true | HC | 56 | 1 | 1/2 |
-uint8
-| hc1.solarinfl | solar influence | uint8 (&gt;=-5&lt;=4294967295) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | uint8 | C | false | HC | 58 | 1 | 1/10 |
+int8
+| hc1.solarinfl | solar influence | int8 (&gt;=-5&lt;=0) | C | true | HC | 57 | 1 | 1 |
+| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
 | hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
 | hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
 uint8
@@ -8143,7 +8146,7 @@ uint8
 | datetime | date/time | string |   | false | DEVICE_DATA | 0 | 13 | 1 |
 | outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
 | src1.currtemp | current room temperature | int16 | C | false | SRC | 0 | 1 | 1/10 |
-| src1.airhumidity | relative air humidity | int8 | % | false | SRC | 1 | 1 | 1 |
+| src1.airhumidity | relative air humidity | uint8 | % | false | SRC | 1 | 1 | 1 |
 | src1.dewtemperature | dew point temperature | int16 | C | false | SRC | 2 | 1 | 1/10 |
 uint8
 | src1.seltemp | selected room temperature | uint8 (&gt;=5&lt;=30) | C | true | SRC | 3 | 1 | 1/2 |
@@ -8353,70 +8356,40 @@ uint8
 | shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
 |-|-|-|-|-|-|-|-|-|
 | dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 16 | 1 | 1/10 |
-| dhw.coldtemp | cold water | uint16 | C | false | DHW | 17 | 1 | 1/10 |
-| dhw.temp5 | temperature 5 | uint16 | C | false | DHW | 18 | 1 | 1/10 |
-| dhw.rettemp | return temperature | uint16 | C | false | DHW | 19 | 1 | 1/10 |
+| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
 | dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
 uint8
 | dhw.maxtemp | maximum temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 12 | 1 | 1 |
+int8
+| dhw.difftemp | start differential temperature | int8 (&gt;=0&lt;=0) | C | true | DHW | 13 | 1 | 1 |
 uint8
-| dhw.seltemp | selected temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 0 | 1 | 1 |
+| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
 uint8
 | dhw.redtemp | reduced temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 14 | 1 | 1 |
 uint8
-| dhw.hottemp | extra hot temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.dailytemp | daily temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
+| dhw.requiredtemp | required temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 15 | 1 | 1 |
 | dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
 | dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-| dhw.circtc | circulation time controlled | boolean |   | true | DHW | 22 | 1 | 1 |
-| dhw.keepwarm | keep warm | boolean |   | true | DHW | 23 | 1 | 1 |
-| dhw.status2 | status 2 | enum |   | false | DHW | 24 | 1 | 1 |
-| dhw.pumpmod | pump modulation | uint8 | % | false | DHW | 25 | 1 | 1 |
-| dhw.flow | flow rate | uint16 | l/min | false | DHW | 26 | 1 | 1/10 |
-uint8
-| dhw.valvereturn | return valve | uint8 (&gt;=0&lt;=0) | % | true | DHW | 27 | 1 | 1 |
-uint8
-| dhw.deltatret | temp. diff. return valve | uint8 (&gt;=0&lt;=0) | K | true | DHW | 28 | 1 | 1 |
-| dhw.errordisp | error display | enum |   | true | DHW | 29 | 1 | 1 |

 ### SM200, MS200

 | shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
 |-|-|-|-|-|-|-|-|-|
 | dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 16 | 1 | 1/10 |
-| dhw.coldtemp | cold water | uint16 | C | false | DHW | 17 | 1 | 1/10 |
-| dhw.temp5 | temperature 5 | uint16 | C | false | DHW | 18 | 1 | 1/10 |
-| dhw.rettemp | return temperature | uint16 | C | false | DHW | 19 | 1 | 1/10 |
+| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
 | dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
 uint8
 | dhw.maxtemp | maximum temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 12 | 1 | 1 |
+int8
+| dhw.difftemp | start differential temperature | int8 (&gt;=0&lt;=0) | C | true | DHW | 13 | 1 | 1 |
 uint8
-| dhw.seltemp | selected temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 0 | 1 | 1 |
+| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
 uint8
 | dhw.redtemp | reduced temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 14 | 1 | 1 |
 uint8
-| dhw.hottemp | extra hot temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.dailytemp | daily temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 8 | 1 | 1 |
+| dhw.requiredtemp | required temperature | uint8 (&gt;=0&lt;=0) | C | true | DHW | 15 | 1 | 1 |
 | dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
 | dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-| dhw.circtc | circulation time controlled | boolean |   | true | DHW | 22 | 1 | 1 |
-| dhw.keepwarm | keep warm | boolean |   | true | DHW | 23 | 1 | 1 |
-| dhw.status2 | status 2 | enum |   | false | DHW | 24 | 1 | 1 |
-| dhw.pumpmod | pump modulation | uint8 | % | false | DHW | 25 | 1 | 1 |
-| dhw.flow | flow rate | uint16 | l/min | false | DHW | 26 | 1 | 1/10 |
-uint8
-| dhw.valvereturn | return valve | uint8 (&gt;=0&lt;=0) | % | true | DHW | 27 | 1 | 1 |
-uint8
-| dhw.deltatret | temp. diff. return valve | uint8 (&gt;=0&lt;=0) | K | true | DHW | 28 | 1 | 1 |
-| dhw.errordisp | error display | enum |   | true | DHW | 29 | 1 | 1 |

 ## Devices of type \_pool

@@ -4044,21 +4044,21 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "UI800, BC400",thermostat,4,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,6,1,1,41,1
 "UI800, BC400",thermostat,4,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,6,1,1,42,1
 "UI800, BC400",thermostat,4,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,6,1,1,43,1
-"UI800, BC400",thermostat,4,hc1.control,control device,enum [off\|-\|RC100\|RC100H\|-\|RC120RF\|RC220/RT800\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
+"UI800, BC400",thermostat,4,hc1.control,control device,enum [off\|-\|RC100\|RC100H\|-\|RC120RF\|RC220\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
 "UI800, BC400",thermostat,4,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,6,1,1/10,45,1
 "UI800, BC400",thermostat,4,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
 "UI800, BC400",thermostat,4,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "UI800, BC400",thermostat,4,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"UI800, BC400",thermostat,4,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"UI800, BC400",thermostat,4,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"UI800, BC400",thermostat,4,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"UI800, BC400",thermostat,4,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"UI800, BC400",thermostat,4,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"UI800, BC400",thermostat,4,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "UI800, BC400",thermostat,4,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"UI800, BC400",thermostat,4,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"UI800, BC400",thermostat,4,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"UI800, BC400",thermostat,4,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"UI800, BC400",thermostat,4,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "UI800, BC400",thermostat,4,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "UI800, BC400",thermostat,4,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
-"UI800, BC400",thermostat,4,hc1.solarinfl,solar influence,uint8 (>=-5<=4294967295),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
-"UI800, BC400",thermostat,4,hc1.currsolarinfl,current solar influence,uint8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
+"UI800, BC400",thermostat,4,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
+"UI800, BC400",thermostat,4,hc1.currsolarinfl,current solar influence,int8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
 "UI800, BC400",thermostat,4,hc1.heatingpid,heating PID,enum [fast\|medium\|slow] (>=0<=0), ,true,select.thermostat_hc1_heating_PID,select.thermostat_hc1_heatingpid,6,1,1,59,1
 "UI800, BC400",thermostat,4,hc1.pumpopt,pump optimization,boolean (>=0<=0), ,true,switch.thermostat_hc1_pump_optimization,switch.thermostat_hc1_pumpopt,6,1,1,60,1
 "UI800, BC400",thermostat,4,hc1.inttimefloor,integral time floor,uint8 (>=160<=320),minutes,true,number.thermostat_hc1_integral_time_floor,number.thermostat_hc1_inttimefloor,6,1,10,61,1
@@ -4439,16 +4439,16 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.control,control device,enum [RC310\|RC200\|RC100\|RC100H\|TC100] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.solarinfl,solar influence,uint8 (>=-5<=4294967295),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
-"RC200, CW100, CR120, CR50",thermostat,157,hc1.currsolarinfl,current solar influence,uint8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
+"RC200, CW100, CR120, CR50",thermostat,157,hc1.currsolarinfl,current solar influence,int8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.heatingpid,heating PID,enum [fast\|medium\|slow] (>=0<=0), ,true,select.thermostat_hc1_heating_PID,select.thermostat_hc1_heatingpid,6,1,1,59,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.pumpopt,pump optimization,boolean (>=0<=0), ,true,switch.thermostat_hc1_pump_optimization,switch.thermostat_hc1_pumpopt,6,1,1,60,1
 "RC200, CW100, CR120, CR50",thermostat,157,hc1.inttimefloor,integral time floor,uint8 (>=160<=320),minutes,true,number.thermostat_hc1_integral_time_floor,number.thermostat_hc1_inttimefloor,6,1,10,61,1
@@ -4537,16 +4537,16 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.solarinfl,solar influence,uint8 (>=-5<=4294967295),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
-"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.currsolarinfl,current solar influence,uint8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
+"RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.currsolarinfl,current solar influence,int8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.heatingpid,heating PID,enum [fast\|medium\|slow] (>=0<=0), ,true,select.thermostat_hc1_heating_PID,select.thermostat_hc1_heatingpid,6,1,1,59,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.pumpopt,pump optimization,boolean (>=0<=0), ,true,switch.thermostat_hc1_pump_optimization,switch.thermostat_hc1_pumpopt,6,1,1,60,1
 "RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410",thermostat,158,hc1.inttimefloor,integral time floor,uint8 (>=160<=320),minutes,true,number.thermostat_hc1_integral_time_floor,number.thermostat_hc1_inttimefloor,6,1,10,61,1
@@ -4644,16 +4644,16 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 2000/3000",thermostat,172,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
 "Rego 2000/3000",thermostat,172,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
 "Rego 2000/3000",thermostat,172,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"Rego 2000/3000",thermostat,172,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"Rego 2000/3000",thermostat,172,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"Rego 2000/3000",thermostat,172,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
+"Rego 2000/3000",thermostat,172,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,49,1
+"Rego 2000/3000",thermostat,172,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,50,1
+"Rego 2000/3000",thermostat,172,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,51,1
 "Rego 2000/3000",thermostat,172,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"Rego 2000/3000",thermostat,172,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"Rego 2000/3000",thermostat,172,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"Rego 2000/3000",thermostat,172,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"Rego 2000/3000",thermostat,172,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "Rego 2000/3000",thermostat,172,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "Rego 2000/3000",thermostat,172,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
-"Rego 2000/3000",thermostat,172,hc1.solarinfl,solar influence,uint8 (>=-5<=4294967295),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
-"Rego 2000/3000",thermostat,172,hc1.currsolarinfl,current solar influence,uint8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
+"Rego 2000/3000",thermostat,172,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
+"Rego 2000/3000",thermostat,172,hc1.currsolarinfl,current solar influence,int8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
 "Rego 2000/3000",thermostat,172,hc1.heatingpid,heating PID,enum [fast\|medium\|slow] (>=0<=0), ,true,select.thermostat_hc1_heating_PID,select.thermostat_hc1_heatingpid,6,1,1,59,1
 "Rego 2000/3000",thermostat,172,hc1.pumpopt,pump optimization,boolean (>=0<=0), ,true,switch.thermostat_hc1_pump_optimization,switch.thermostat_hc1_pumpopt,6,1,1,60,1
 "Rego 2000/3000",thermostat,172,hc1.inttimefloor,integral time floor,uint8 (>=160<=320),minutes,true,number.thermostat_hc1_integral_time_floor,number.thermostat_hc1_inttimefloor,6,1,10,61,1
@@ -4720,6 +4720,14 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,pvraiseheat,raise heating with PV,int8 (>=0<=5),K,true,number.thermostat_raise_heating_with_PV,number.thermostat_pvraiseheat,6,0,1,62,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,pvlowercool,lower cooling with PV,int8 (>=-5<=0),K,true,number.thermostat_lower_cooling_with_PV,number.thermostat_pvlowercool,6,0,1,63,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,absent,absent,boolean (>=0<=0), ,true,switch.thermostat_absent,switch.thermostat_absent,6,0,1,64,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hpoperatingmode,heatpump operating mode,enum [off\|auto\|heating\|cooling] (>=0<=0), ,true,select.thermostat_heatpump_operating_mode,select.thermostat_hpoperatingmode,6,0,1,89,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,summertemp,summer temperature,uint8 (>=10<=30),C,true,number.thermostat_summer_temperature,number.thermostat_summertemp,6,0,1,90,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_instant_start,number.thermostat_instantstart,6,0,1,91,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_cooling_starttemp,number.thermostat_coolstart,6,0,1,92,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_heat-on_delay,number.thermostat_heatondelay,6,0,1/4,93,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_heat-off_delay,number.thermostat_heatoffdelay,6,0,1/4,94,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_cooling_on_delay,number.thermostat_coolondelay,6,0,1/4,95,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_cooling_off_delay,number.thermostat_cooloffdelay,6,0,1/4,96,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.seltemp,selected room temperature,int16 (>=0<=30),C,true,number.thermostat_hc1_selected_room_temperature,number.thermostat_hc1_seltemp,6,1,1/2,0,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.currtemp,current room temperature,int16,C,false,sensor.thermostat_hc1_current_room_temperature,sensor.thermostat_hc1_currtemp,6,1,1/10,1,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.haclimate,mqtt discovery current room temperature,enum [selTemp\|roomTemp], ,false,sensor.thermostat_hc1_mqtt_discovery_current_room_temperature,sensor.thermostat_hc1_haclimate,6,1,1,2,1
@@ -4764,21 +4772,15 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.dewoffset,dew point offset,uint8 (>=2<=10),K,true,number.thermostat_hc1_dew_point_offset,number.thermostat_hc1_dewoffset,6,1,1,41,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.roomtempdiff,room temp difference,uint8 (>=0<=0),K,true,number.thermostat_hc1_room_temp_difference,number.thermostat_hc1_roomtempdiff,6,1,1,42,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.hpminflowtemp,HP min. flow temp.,uint8 (>=0<=0),C,true,number.thermostat_hc1_HP_min._flow_temp.,number.thermostat_hc1_hpminflowtemp,6,1,1,43,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.control,control device,enum [off\|-\|RC100\|RC100H\|-\|RC120RF\|RC220/RT800\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.control,control device,enum [off\|-\|CR10\|CR10H\|-\|CR20RF\|RT800\|single] (>=0<=0), ,true,select.thermostat_hc1_control_device,select.thermostat_hc1_control,6,1,1,44,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.remotetemp,room temperature from remote,cmd [] (>=-1<=101),C,true,sensor.thermostat_hc1_room_temperature_from_remote,sensor.thermostat_hc1_remotetemp,6,1,1/10,45,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.remotehum,room humidity from remote,cmd [] (>=-1<=101),%,true,sensor.thermostat_hc1_room_humidity_from_remote,sensor.thermostat_hc1_remotehum,6,1,1,46,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.heatondelay,heat-on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-on_delay,number.thermostat_hc1_heatondelay,6,1,1,47,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.heatoffdelay,heat-off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_heat-off_delay,number.thermostat_hc1_heatoffdelay,6,1,1,48,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.instantstart,instant start,uint8 (>=1<=10),K,true,number.thermostat_hc1_instant_start,number.thermostat_hc1_instantstart,6,1,1,49,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,50,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,51,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.coolstart,cooling starttemp,uint8 (>=20<=35),C,true,number.thermostat_hc1_cooling_starttemp,number.thermostat_hc1_coolstart,6,1,1,52,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.coolondelay,cooling on delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_on_delay,number.thermostat_hc1_coolondelay,6,1,1,53,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.cooloffdelay,cooling off delay,uint8 (>=1<=48),hours,true,number.thermostat_hc1_cooling_off_delay,number.thermostat_hc1_cooloffdelay,6,1,1,54,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boost,boost mode,boolean (>=0<=0), ,true,switch.thermostat_hc1_boost_mode,switch.thermostat_hc1_boost,6,1,1,53,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.boosttime,boost time,uint8 (>=0<=0),hours,true,number.thermostat_hc1_boost_time,number.thermostat_hc1_boosttime,6,1,1,54,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.switchprogmode,switch program mode,enum [level\|absolute] (>=0<=0), ,true,select.thermostat_hc1_switch_program_mode,select.thermostat_hc1_switchprogmode,6,1,1,55,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.redthreshold,reduction threshold,int8 (>=12<=22),C,true,number.thermostat_hc1_reduction_threshold,number.thermostat_hc1_redthreshold,6,1,1/2,56,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.solarinfl,solar influence,uint8 (>=-5<=4294967295),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
-"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.currsolarinfl,current solar influence,uint8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.solarinfl,solar influence,int8 (>=-5<=0),C,true,number.thermostat_hc1_solar_influence,number.thermostat_hc1_solarinfl,6,1,1,57,1
+"Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.currsolarinfl,current solar influence,int8,C,false,sensor.thermostat_hc1_current_solar_influence,sensor.thermostat_hc1_currsolarinfl,6,1,1/10,58,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.heatingpid,heating PID,enum [fast\|medium\|slow] (>=0<=0), ,true,select.thermostat_hc1_heating_PID,select.thermostat_hc1_heatingpid,6,1,1,59,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.pumpopt,pump optimization,boolean (>=0<=0), ,true,switch.thermostat_hc1_pump_optimization,switch.thermostat_hc1_pumpopt,6,1,1,60,1
 "Rego 3000, UI800, Logamatic BC400",thermostat,253,hc1.inttimefloor,integral time floor,uint8 (>=160<=320),minutes,true,number.thermostat_hc1_integral_time_floor,number.thermostat_hc1_inttimefloor,6,1,10,61,1
@@ -5859,7 +5861,7 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "MX400",connect,17,datetime,date/time,string, ,false,sensor.connect_date/time,sensor.connect_datetime,13,0,1,0,13
 "MX400",connect,17,outdoortemp,outside temperature,int16,C,false,sensor.connect_outside_temperature,sensor.connect_outdoortemp,13,0,1/10,13,1
 "MX400",connect,17,src1.currtemp,current room temperature,int16,C,false,sensor.connect_src1_current_room_temperature,sensor.connect_src1_currtemp,13,36,1/10,0,1
-"MX400",connect,17,src1.airhumidity,relative air humidity,int8,%,false,sensor.connect_src1_relative_air_humidity,sensor.connect_src1_airhumidity,13,36,1,1,1
+"MX400",connect,17,src1.airhumidity,relative air humidity,uint8,%,false,sensor.connect_src1_relative_air_humidity,sensor.connect_src1_airhumidity,13,36,1,1,1
 "MX400",connect,17,src1.dewtemperature,dew point temperature,int16,C,false,sensor.connect_src1_dew_point_temperature,sensor.connect_src1_dewtemperature,13,36,1/10,2,1
 "MX400",connect,17,src1.seltemp,selected room temperature,uint8 (>=5<=30),C,true,number.connect_src1_selected_room_temperature,number.connect_src1_seltemp,13,36,1/2,3,1
 "MX400",connect,17,src1.mode,operating mode,enum [off\|manual\|auto] (>=0<=0), ,true,select.connect_src1_operating_mode,select.connect_src1_mode,13,36,1,4,1
@@ -5973,49 +5975,25 @@ device name,device type,product id,shortname,fullname,type [options...] \| (min/
 "MM200",water,161,dhw.circ,circulation active,boolean (>=0<=0), ,true,switch.water_dhw_circulation_active,switch.water_dhw_circ,19,9,1,9,1
 "MM200",water,161,dhw.circmode,circulation pump mode,enum [off\|on\|auto\|own prog] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
 "SM100, MS100",water,163,dhw.temp,current temperature,uint16,C,false,sensor.water_dhw_current_temperature,sensor.water_dhw_temp,19,9,1/10,1,1
-"SM100, MS100",water,163,dhw.storagetemp1,storage intern temperature,uint16,C,false,sensor.water_dhw_storage_intern_temperature,sensor.water_dhw_storagetemp1,19,9,1/10,16,1
-"SM100, MS100",water,163,dhw.coldtemp,cold water,uint16,C,false,sensor.water_dhw_cold_water,sensor.water_dhw_coldtemp,19,9,1/10,17,1
-"SM100, MS100",water,163,dhw.temp5,temperature 5,uint16,C,false,sensor.water_dhw_temperature_5,sensor.water_dhw_temp5,19,9,1/10,18,1
-"SM100, MS100",water,163,dhw.rettemp,return temperature,uint16,C,false,sensor.water_dhw_return_temperature,sensor.water_dhw_rettemp,19,9,1/10,19,1
+"SM100, MS100",water,163,dhw.tempstatus,temperature switch in assigned dhw (MC1),int8, ,false,sensor.water_dhw_temperature_switch_in_assigned_dhw_(MC1),sensor.water_dhw_tempstatus,19,9,1,11,1
 "SM100, MS100",water,163,dhw.pump,pump,boolean, ,false,binary_sensor.water_dhw_pump,binary_sensor.water_dhw_pump,19,9,1,4,1
 "SM100, MS100",water,163,dhw.maxtemp,maximum temperature,uint8 (>=0<=0),C,true,number.water_dhw_maximum_temperature,number.water_dhw_maxtemp,19,9,1,12,1
-"SM100, MS100",water,163,dhw.seltemp,selected temperature,uint8 (>=0<=0),C,true,number.water_dhw_selected_temperature,number.water_dhw_seltemp,19,9,1,0,1
-"SM100, MS100",water,163,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
-"SM100, MS100",water,163,dhw.hottemp,extra hot temperature,uint8 (>=0<=0),C,true,number.water_dhw_extra_hot_temperature,number.water_dhw_hottemp,19,9,1,20,1
-"SM100, MS100",water,163,dhw.dailytemp,daily temperature,uint8 (>=0<=0),C,true,number.water_dhw_daily_temperature,number.water_dhw_dailytemp,19,9,1,21,1
+"SM100, MS100",water,163,dhw.difftemp,start differential temperature,int8 (>=0<=0),C,true,number.water_dhw_start_differential_temperature,number.water_dhw_difftemp,19,9,1,13,1
 "SM100, MS100",water,163,dhw.disinfectiontemp,disinfection temperature,uint8 (>=0<=0),C,true,number.water_dhw_disinfection_temperature,number.water_dhw_disinfectiontemp,19,9,1,8,1
+"SM100, MS100",water,163,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
+"SM100, MS100",water,163,dhw.requiredtemp,required temperature,uint8 (>=0<=0),C,true,number.water_dhw_required_temperature,number.water_dhw_requiredtemp,19,9,1,15,1
 "SM100, MS100",water,163,dhw.circ,circulation active,boolean (>=0<=0), ,true,switch.water_dhw_circulation_active,switch.water_dhw_circ,19,9,1,9,1
-"SM100, MS100",water,163,dhw.circmode,circulation pump mode,enum [off\|1x3min\|2x3min\|3x3min\|4x3min\|5x3min\|6x3min\|continuous] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
-"SM100, MS100",water,163,dhw.circtc,circulation time controlled,boolean (>=0<=0), ,true,switch.water_dhw_circulation_time_controlled,switch.water_dhw_circtc,19,9,1,22,1
-"SM100, MS100",water,163,dhw.keepwarm,keep warm,boolean (>=0<=0), ,true,switch.water_dhw_keep_warm,switch.water_dhw_keepwarm,19,9,1,23,1
-"SM100, MS100",water,163,dhw.status2,status 2,enum [\|\|\|no heat\|\|\|heat request\|\|disinfecting\|hold], ,false,sensor.water_dhw_status_2,sensor.water_dhw_status2,19,9,1,24,1
-"SM100, MS100",water,163,dhw.pumpmod,pump modulation,uint8,%,false,sensor.water_dhw_pump_modulation,sensor.water_dhw_pumpmod,19,9,1,25,1
-"SM100, MS100",water,163,dhw.flow,flow rate,uint16,l/min,false,sensor.water_dhw_flow_rate,sensor.water_dhw_flow,19,9,1/10,26,1
-"SM100, MS100",water,163,dhw.valvereturn,return valve,uint8 (>=0<=0),%,true,number.water_dhw_return_valve,number.water_dhw_valvereturn,19,9,1,27,1
-"SM100, MS100",water,163,dhw.deltatret,temp. diff. return valve,uint8 (>=0<=0),K,true,number.water_dhw_temp._diff._return_valve,number.water_dhw_deltatret,19,9,1,28,1
-"SM100, MS100",water,163,dhw.errordisp,error display,enum [off\|normal\|inverted] (>=0<=0), ,true,select.water_dhw_error_display,select.water_dhw_errordisp,19,9,1,29,1
+"SM100, MS100",water,163,dhw.circmode,circulation pump mode,enum [off\|on\|auto\|own prog] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
 "SM200, MS200",water,164,dhw.temp,current temperature,uint16,C,false,sensor.water_dhw_current_temperature,sensor.water_dhw_temp,19,9,1/10,1,1
-"SM200, MS200",water,164,dhw.storagetemp1,storage intern temperature,uint16,C,false,sensor.water_dhw_storage_intern_temperature,sensor.water_dhw_storagetemp1,19,9,1/10,16,1
-"SM200, MS200",water,164,dhw.coldtemp,cold water,uint16,C,false,sensor.water_dhw_cold_water,sensor.water_dhw_coldtemp,19,9,1/10,17,1
-"SM200, MS200",water,164,dhw.temp5,temperature 5,uint16,C,false,sensor.water_dhw_temperature_5,sensor.water_dhw_temp5,19,9,1/10,18,1
-"SM200, MS200",water,164,dhw.rettemp,return temperature,uint16,C,false,sensor.water_dhw_return_temperature,sensor.water_dhw_rettemp,19,9,1/10,19,1
+"SM200, MS200",water,164,dhw.tempstatus,temperature switch in assigned dhw (MC1),int8, ,false,sensor.water_dhw_temperature_switch_in_assigned_dhw_(MC1),sensor.water_dhw_tempstatus,19,9,1,11,1
 "SM200, MS200",water,164,dhw.pump,pump,boolean, ,false,binary_sensor.water_dhw_pump,binary_sensor.water_dhw_pump,19,9,1,4,1
 "SM200, MS200",water,164,dhw.maxtemp,maximum temperature,uint8 (>=0<=0),C,true,number.water_dhw_maximum_temperature,number.water_dhw_maxtemp,19,9,1,12,1
-"SM200, MS200",water,164,dhw.seltemp,selected temperature,uint8 (>=0<=0),C,true,number.water_dhw_selected_temperature,number.water_dhw_seltemp,19,9,1,0,1
-"SM200, MS200",water,164,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
-"SM200, MS200",water,164,dhw.hottemp,extra hot temperature,uint8 (>=0<=0),C,true,number.water_dhw_extra_hot_temperature,number.water_dhw_hottemp,19,9,1,20,1
-"SM200, MS200",water,164,dhw.dailytemp,daily temperature,uint8 (>=0<=0),C,true,number.water_dhw_daily_temperature,number.water_dhw_dailytemp,19,9,1,21,1
+"SM200, MS200",water,164,dhw.difftemp,start differential temperature,int8 (>=0<=0),C,true,number.water_dhw_start_differential_temperature,number.water_dhw_difftemp,19,9,1,13,1
 "SM200, MS200",water,164,dhw.disinfectiontemp,disinfection temperature,uint8 (>=0<=0),C,true,number.water_dhw_disinfection_temperature,number.water_dhw_disinfectiontemp,19,9,1,8,1
+"SM200, MS200",water,164,dhw.redtemp,reduced temperature,uint8 (>=0<=0),C,true,number.water_dhw_reduced_temperature,number.water_dhw_redtemp,19,9,1,14,1
+"SM200, MS200",water,164,dhw.requiredtemp,required temperature,uint8 (>=0<=0),C,true,number.water_dhw_required_temperature,number.water_dhw_requiredtemp,19,9,1,15,1
 "SM200, MS200",water,164,dhw.circ,circulation active,boolean (>=0<=0), ,true,switch.water_dhw_circulation_active,switch.water_dhw_circ,19,9,1,9,1
-"SM200, MS200",water,164,dhw.circmode,circulation pump mode,enum [off\|1x3min\|2x3min\|3x3min\|4x3min\|5x3min\|6x3min\|continuous] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
-"SM200, MS200",water,164,dhw.circtc,circulation time controlled,boolean (>=0<=0), ,true,switch.water_dhw_circulation_time_controlled,switch.water_dhw_circtc,19,9,1,22,1
-"SM200, MS200",water,164,dhw.keepwarm,keep warm,boolean (>=0<=0), ,true,switch.water_dhw_keep_warm,switch.water_dhw_keepwarm,19,9,1,23,1
-"SM200, MS200",water,164,dhw.status2,status 2,enum [\|\|\|no heat\|\|\|heat request\|\|disinfecting\|hold], ,false,sensor.water_dhw_status_2,sensor.water_dhw_status2,19,9,1,24,1
-"SM200, MS200",water,164,dhw.pumpmod,pump modulation,uint8,%,false,sensor.water_dhw_pump_modulation,sensor.water_dhw_pumpmod,19,9,1,25,1
-"SM200, MS200",water,164,dhw.flow,flow rate,uint16,l/min,false,sensor.water_dhw_flow_rate,sensor.water_dhw_flow,19,9,1/10,26,1
-"SM200, MS200",water,164,dhw.valvereturn,return valve,uint8 (>=0<=0),%,true,number.water_dhw_return_valve,number.water_dhw_valvereturn,19,9,1,27,1
-"SM200, MS200",water,164,dhw.deltatret,temp. diff. return valve,uint8 (>=0<=0),K,true,number.water_dhw_temp._diff._return_valve,number.water_dhw_deltatret,19,9,1,28,1
-"SM200, MS200",water,164,dhw.errordisp,error display,enum [off\|normal\|inverted] (>=0<=0), ,true,select.water_dhw_error_display,select.water_dhw_errordisp,19,9,1,29,1
+"SM200, MS200",water,164,dhw.circmode,circulation pump mode,enum [off\|on\|auto\|own prog] (>=0<=0), ,true,select.water_dhw_circulation_pump_mode,select.water_dhw_circmode,19,9,1,10,1
 "MP100",pool,204,pooltemp,pool temperature,int16,C,false,sensor.pool_pool_temperature,sensor.pool_pooltemp,20,0,1/10,-1,1
 "MP100",pool,204,poolshuntstatus,pool shunt status opening/closing,enum [stopped\|opening\|closing\|open\|close], ,false,sensor.pool_pool_shunt_status_opening/closing,sensor.pool_poolshuntstatus,20,0,1,-1,1
 "MP100",pool,204,poolshunt,pool shunt open/close (0% = pool / 100% = heat),uint8,%,false,sensor.pool_pool_shunt_open/close_(0%_=_pool_/_100%_=_heat),sensor.pool_poolshunt,20,0,1,-1,1
@@ -13,7 +13,7 @@ telegram_type_id,name,is_fetched
 0x19,UBAMonitorSlow, 
 0x1A,UBASetPoints, 
 0x1C,UBAMaintenanceStatus, 
-0x1E,HydrTemp, 
+0x1E,WM10TempMessage, 
 0x23,JunkersSetMixer,fetched
 0x27,UBASettingsWW,fetched
 0x28,WeatherComp,fetched
@@ -77,7 +77,7 @@ telegram_type_id,name,is_fetched
 0x0103,ISM1StatusMessage,fetched
 0x0104,ISM2StatusMessage, 
 0x010C,IPMStatusMessage, 
-0x011E,IPMTempMessage, 
+0x011E,JunkersDisp,fetched
 0x012E,HPEnergy1, 
 0x013B,HPEnergy2, 
 0x0165,JunkersSet, 
@@ -112,10 +112,10 @@ telegram_type_id,name,is_fetched
 0x02A0,RC300Curves, 
 0x02A1,RC300Curves, 
 0x02A2,RC300Curves, 
-0x02A5,RC300Monitor, 
+0x02A5,CRFMonitor, 
 0x02A6,RC300Monitor, 
 0x02A7,RC300Monitor, 
-0x02A8,RC300Monitor, 
+0x02A8,CRFMonitor, 
 0x02A9,RC300Monitor, 
 0x02AA,RC300Monitor, 
 0x02AB,RC300Monitor, 
@@ -171,15 +171,15 @@ telegram_type_id,name,is_fetched
 0x0468,HPSet, 
 0x0469,HPSet, 
 0x046A,HPSet, 
-0x0470,RC300Summer2,fetched
-0x0471,RC300Summer2, 
-0x0472,RC300Summer2, 
-0x0473,RC300Summer2, 
-0x0474,RC300Summer2, 
-0x0475,RC300Summer2, 
-0x0476,RC300Summer2, 
-0x0477,RC300Summer2, 
-0x0478,RC300Summer2, 
+0x0470,RC300Summer3,fetched
+0x0471,RC300Sumr2, 
+0x0472,RC300Sumr2, 
+0x0473,RC300Sumr2, 
+0x0474,RC300Sumr2, 
+0x0475,RC300Sumr2, 
+0x0476,RC300Sumr2, 
+0x0477,RC300Sumr2, 
+0x0478,RC300Sumr2, 
 0x047B,HP2, 
 0x0484,HPSilentMode,fetched
 0x0485,HpCooling,fetched
@@ -199,7 +199,7 @@ telegram_type_id,name,is_fetched
 0x04A2,HpInput,fetched
 0x04A5,HPFan,fetched
 0x04A7,HPPowerLimit,fetched
-0x04AA,HPPower, 
+0x04AA,HPPower2,fetched
 0x04AE,HPEnergy,fetched
 0x04AF,HPMeters,fetched
 0x055C,VentilationSet,fetched
@@ -24,6 +24,7 @@ build_flags =
    -D FACTORY_NTP_TIME_ZONE_LABEL=\"Europe/Amsterdam\"
    -D FACTORY_NTP_TIME_ZONE_FORMAT=\"CET-1CEST,M3.5.0,M10.5.0/3\"
    -D FACTORY_NTP_SERVER=\"time.google.com\"
+    -D FACTORY_NTP_THERMOSTAT_SYNC=0

    ; MQTT settings
    -D FACTORY_MQTT_ENABLED=false
@@ -26,8 +26,8 @@
    "@alova/adapter-xhr": "2.3.1",
    "@emotion/react": "^11.14.0",
    "@emotion/styled": "^11.14.1",
-    "@mui/icons-material": "^9.0.1",
-    "@mui/material": "^9.0.1",
+    "@mui/icons-material": "^9.2.0",
+    "@mui/material": "^9.2.0",
    "@preact/compat": "^18.3.2",
    "@table-library/react-table-library": "4.1.15",
    "alova": "3.5.1",
@@ -37,17 +37,17 @@
    "jwt-decode": "^4.0.0",
    "magic-string": "^0.30.21",
    "mime-types": "^3.0.2",
-    "preact": "^10.29.1",
-    "react": "^19.2.6",
-    "react-dom": "^19.2.6",
-    "react-icons": "^5.6.0",
-    "react-router": "^7.15.0",
+    "preact": "^10.29.7",
+    "react": "^19.2.7",
+    "react-dom": "^19.2.7",
+    "react-icons": "^5.7.0",
+    "react-router": "^7.18.1",
    "react-toastify": "^11.1.0",
    "typesafe-i18n": "^5.27.1",
    "typescript": "^6.0.3"
  },
  "devDependencies": {
-    "@babel/core": "^7.29.0",
+    "@babel/core": "^7.29.7",
    "@eslint/js": "^10.0.1",
    "@preact/compat": "^18.3.2",
    "@preact/preset-vite": "^2.10.5",
@@ -55,11 +55,11 @@
    "@types/node": "^25.7.0",
    "@types/react": "^19.2.14",
    "@types/react-dom": "^19.2.3",
-    "axe-core": "^4.11.4",
-    "concurrently": "^9.2.1",
-    "eslint": "^10.3.0",
+    "axe-core": "^4.12.1",
+    "concurrently": "^9.2.4",
+    "eslint": "^10.7.0",
    "eslint-config-prettier": "^10.1.8",
-    "prettier": "^3.8.3",
+    "prettier": "^3.9.5",
    "rollup-plugin-visualizer": "^7.0.1",
    "terser": "^5.47.1",
    "typescript-eslint": "^8.59.3",
@@ -1,3 +1,28 @@
+allowBuilds:
+  cwebp-bin: set this to true or false
+  esbuild: set this to true or false
+  gifsicle: set this to true or false
+  jpegtran-bin: set this to true or false
+  mozjpeg: set this to true or false
+  optipng-bin: set this to true or false
+  pngquant-bin: set this to true or false
+minimumReleaseAgeExclude:
+  - '@babel/code-frame@7.29.7'
+  - '@babel/compat-data@7.29.7'
+  - '@babel/core@7.29.7'
+  - '@babel/generator@7.29.7'
+  - '@babel/helper-compilation-targets@7.29.7'
+  - '@babel/helper-globals@7.29.7'
+  - '@babel/helper-module-imports@7.29.7'
+  - '@babel/helper-module-transforms@7.29.7'
+  - '@babel/helper-string-parser@7.29.7'
+  - '@babel/helper-validator-identifier@7.29.7'
+  - '@babel/helper-validator-option@7.29.7'
+  - '@babel/helpers@7.29.7'
+  - '@babel/parser@7.29.7'
+  - '@babel/template@7.29.7'
+  - '@babel/traverse@7.29.7'
+  - '@babel/types@7.29.7'
 onlyBuiltDependencies:
  - cwebp-bin
  - esbuild
@@ -19,7 +19,7 @@ const AVAILABLE_LOCALES = [
  'sk',
  'sv',
  'tr',
-  'cz'
+  'cs'
 ] as Locales[];

 // Static toast configuration - no need to recreate on every render
@@ -13,11 +13,7 @@ import VisibilityOutlinedIcon from '@mui/icons-material/VisibilityOutlined';
 import type { SvgIconProps } from '@mui/material';

 export type OptionType =
-  | 'deleted'
-  | 'readonly'
-  | 'web_exclude'
-  | 'api_mqtt_exclude'
-  | 'favorite';
+  'deleted' | 'readonly' | 'web_exclude' | 'api_mqtt_exclude' | 'favorite';

 type IconPair = [
  React.ComponentType<SvgIconProps>,
@@ -396,7 +396,7 @@ const ApplicationSettings = () => {
              margin="normal"
              select
            >
-              <MenuItem value="cz">Česky (CZ)</MenuItem>
+              <MenuItem value="cs">Česky (CS)</MenuItem>
              <MenuItem value="de">Deutsch (DE)</MenuItem>
              <MenuItem value="en">English (EN)</MenuItem>
              <MenuItem value="fr">Français (FR)</MenuItem>
@@ -12,6 +12,7 @@ import {
  DialogActions,
  DialogContent,
  DialogTitle,
+  Grid,
  MenuItem,
  TextField,
  Typography
@@ -39,7 +40,12 @@ import { formatLocalDateTime, updateValueDirty, useRest } from 'utils';
 import { ValidationError, validate } from 'validators';
 import { NTP_SETTINGS_VALIDATOR } from 'validators/ntp';

-import { TIME_ZONES, selectedTimeZone, useTimeZoneSelectItems } from './TZ';
+import {
+  TIME_ZONES,
+  selectedTimeZone,
+  timeZoneSelectItemsT,
+  useTimeZoneSelectItems
+} from './TZ';

 const NTPSettings = () => {
  const {
@@ -63,13 +69,17 @@ const NTPSettings = () => {

  // Memoized timezone select items for better performance
  const timeZoneItems = useTimeZoneSelectItems();
+  const timeZoneItemsT = timeZoneSelectItemsT();

  // Memoized selected timezone value
  const selectedTzValue = useMemo(
    () => (data ? selectedTimeZone(data.tz_label, data.tz_format) : undefined),
    [data?.tz_label, data?.tz_format]
  );
-
+  const selectedTzValueT = useMemo(
+    () => (data ? selectedTimeZone(data.tz_label_t, data.tz_format_t) : undefined),
+    [data?.tz_label_t, data?.tz_format_t]
+  );
  const [localTime, setLocalTime] = useState<string>('');
  const [settingTime, setSettingTime] = useState<boolean>(false);
  const [processing, setProcessing] = useState<boolean>(false);
@@ -150,6 +160,18 @@ const NTPSettings = () => {
    [updateFormValue]
  );

+  const changeTimeZoneT = useCallback(
+    (event: React.ChangeEvent<HTMLInputElement>) => {
+      void updateState(readNTPSettings(), (settings: NTPSettingsType) => ({
+        ...settings,
+        tz_label_t: event.target.value,
+        tz_format_t: TIME_ZONES[event.target.value]
+      }));
+      updateFormValue(event);
+    },
+    [updateFormValue]
+  );
+
  // Memoize render content to prevent unnecessary re-renders
  const renderContent = useMemo(() => {
    if (!data) {
@@ -174,6 +196,7 @@ const NTPSettings = () => {
          label={LL.NTP_SERVER()}
          fullWidth
          variant="outlined"
+          disabled={!data.enabled}
          value={data.server}
          onChange={updateFormValue}
          margin="normal"
@@ -192,7 +215,47 @@ const NTPSettings = () => {
          <MenuItem disabled>{LL.TIME_ZONE()}...</MenuItem>
          {timeZoneItems}
        </ValidatedTextField>
-
+        {data.enabled && (
+          <Grid container spacing={2} rowSpacing={0}>
+            <Grid>
+              <ValidatedTextField
+                fieldErrors={fieldErrors || {}}
+                name="thermostat_sync"
+                label="Sync EMS-Thermostat"
+                variant="outlined"
+                sx={{ width: '30ch' }}
+                value={data.thermostat_sync}
+                onChange={updateFormValue}
+                margin="normal"
+                select
+              >
+                <MenuItem value={0}>{LL.OFF()}</MenuItem>
+                <MenuItem value={1}>{LL.ON()}</MenuItem>
+                <MenuItem value={2}>
+                  {LL.USE()} {LL.TIME_ZONE()}
+                </MenuItem>
+              </ValidatedTextField>
+            </Grid>
+            <Grid>
+              {data.thermostat_sync === 2 && (
+                <ValidatedTextField
+                  fieldErrors={fieldErrors || {}}
+                  name="tz_label_t"
+                  label={LL.TIME_ZONE() + ' Thermostat'}
+                  sx={{ width: '30ch' }}
+                  variant="outlined"
+                  value={selectedTzValueT}
+                  onChange={changeTimeZoneT}
+                  margin="normal"
+                  select
+                >
+                  <MenuItem disabled>{LL.TIME_ZONE()}...</MenuItem>
+                  {timeZoneItemsT}
+                </ValidatedTextField>
+              )}
+            </Grid>
+          </Grid>
+        )}
        <Box sx={{ display: 'flex', flexWrap: 'wrap' }}>
          {!data.enabled && !dirtyFlags.length && (
            <Box sx={{ flexWrap: 'nowrap', whiteSpace: 'nowrap' }}>
@@ -243,6 +306,7 @@ const NTPSettings = () => {
    updateFormValue,
    fieldErrors,
    selectedTzValue,
+    selectedTzValueT,
    changeTimeZone,
    timeZoneItems,
    dirtyFlags,
@@ -495,3 +495,7 @@ const precomputedTimeZoneItems = TIME_ZONE_LABELS.map((label) => (
 export function timeZoneSelectItems() {
  return precomputedTimeZoneItems;
 }
+
+export function timeZoneSelectItemsT() {
+  return precomputedTimeZoneItems;
+}
@@ -316,16 +316,12 @@ const InstallDialog = memo(
            )}
          </Typography>
          {upgradeImportantMessageType === 2 && LL.UPGRADE_IMPORTANT_MESSAGES_2()}
-          {upgradeImportantMessageType === 1 && (
-            <>
-              {LL.UPGRADE_IMPORTANT_MESSAGES_1()}
+          {upgradeImportantMessageType === 1 && LL.UPGRADE_IMPORTANT_MESSAGES_1()}
              <Typography sx={{ mt: 2 }}>
                <Link to="/settings/downloadUpload" style={{ color: 'lightblue' }}>
                  {LL.DOWNLOAD_SYSTEM_BACKUP()}
                </Link>
              </Typography>
-            </>
-          )}
          <Typography sx={{ mt: 2 }}>
            <Link
              to="https://docs.emsesp.org/FAQ#upgrading-the-firmware"
@@ -28,7 +28,7 @@ interface LanguageOption {
 }

 const LANGUAGE_OPTIONS: LanguageOption[] = [
-  { key: 'cz', flag: CZflag, label: 'CZ' },
+  { key: 'cs', flag: CZflag, label: 'CS' },
  { key: 'de', flag: DEflag, label: 'DE' },
  { key: 'en', flag: GBflag, label: 'EN' },
  { key: 'fr', flag: FRflag, label: 'FR' },
@@ -1,6 +1,6 @@
 import type { Translation } from '../i18n-types';

-const cz: Translation = {
+const cs: Translation = {
  LANGUAGE: 'Jazyk',
  RETRY: 'Zkusit znovu',
  LOADING: 'Načítání',
@@ -363,9 +363,9 @@ const cz: Translation = {
  ONLINE_HELP: 'online nápověda',
  UPGRADE_IMPORTANT_MESSAGES: 'Aktualizovat důležité zprávy',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Tato aktualizace vyžaduje obnovení továrního nastavení. Ujistěte se, že nejprve stáhnete systémovou zálohu před pokračováním a poté nahrajte tento soubor po instalaci nové verze.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Aktualizujete se na novou hlavní verzi. Ujistěte se, že jste přečetli ChangeLog pro jakékoliv závažné změny.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Aktualizujete se na novou major verzi. Je vhodné nejprve vytvořit systémovou zálohu. Také zkontrolujte online nápovědu pro jakékoliv závažné změny.',
  WARNING_SYSTEM_BACKUP: 'Toto vytvoří zálohu vašich celých systémových konfigurací a nastavení. Všechna hesla budou v zálohovém souboru čitelná. Buďte opatrní při sdílení! Opravdu chcete pokračovat?'

 };

-export default cz;
+export default cs;
@@ -363,7 +363,7 @@ const de: Translation = {
  ONLINE_HELP: 'Online-Hilfe',
  UPGRADE_IMPORTANT_MESSAGES: 'Wichtige Nachrichten aktualisieren',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Für diese Aktualisierung ist ein Werksreset erforderlich. Stellen Sie sicher, dass Sie zuerst eine Systemsicherung herunterladen, bevor Sie fortfahren, und laden Sie diese Datei dann nach der Installation der neuen Version hoch.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Sie aktualisieren auf eine neue Hauptversion. Stellen Sie sicher, dass Sie den ChangeLog für alle wichtigen Änderungen gelesen haben.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Sie aktualisieren auf eine neue major Version. Es ist ratsam, zuerst eine Systemsicherung zu erstellen. Überprüfen Sie auch die Online-Hilfe für eventuelle wichtige Änderungen.',
  WARNING_SYSTEM_BACKUP: 'Dies wird eine Sicherung Ihrer vollständigen Systemkonfiguration und Einstellungen erstellen. Alle Passwörter werden in dieser Sicherungsdatei lesbar sein. Seien Sie vorsichtig beim Teilen! Möchten Sie fortfahren?'

 };
@@ -363,7 +363,7 @@ const en: Translation = {
  ONLINE_HELP: 'online help',
  UPGRADE_IMPORTANT_MESSAGES: 'Upgrade Important Messages',
  UPGRADE_IMPORTANT_MESSAGES_1: 'This upgrade requires a factory reset. Make sure you first download a System Backup before continuing, and then upload this file after the new version is installed.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'You are upgrading to a new major version. Make sure you have read the ChangeLog for any breaking changes.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'You are upgrading to a new major version. It is advisable to make a system backup first. Also check the online help for any breaking changes.',
  WARNING_SYSTEM_BACKUP: 'This will create a backup of your full system configuration and settings. All passwords will be readable in the backup file. Be careful with sharing! Do you want to continue?'

 };
@@ -363,7 +363,7 @@ const fr: Translation = {
  ONLINE_HELP: 'aide en ligne',
  UPGRADE_IMPORTANT_MESSAGES: 'Mettre à jour les messages importants',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Cette mise à jour nécessite une réinitialisation de fabrique. Assurez-vous de télécharger une sauvegarde système avant de continuer, et de la charger après l\'installation de la nouvelle version.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Vous mettez à jour vers une nouvelle version majeure. Assurez-vous de lire le ChangeLog pour tout changement important.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Vous mettez à jour vers une nouvelle version majeure. Il est recommandé de créer d\'abord une sauvegarde système. Vérifiez également l\'aide en ligne pour les éventuelles modifications importantes.',
  WARNING_SYSTEM_BACKUP: 'Cela créera une sauvegarde de votre configuration et paramètres complets. Tous les mots de passe seront lisibles dans le fichier de sauvegarde. Soyez prudent avec le partage ! Voulez-vous continuer ?'

 };
@@ -363,7 +363,7 @@ const it: Translation = {
  ONLINE_HELP: 'aiuto online',
  UPGRADE_IMPORTANT_MESSAGES: 'Aggiorna Messaggi Importanti',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Questa aggiornamento richiede un ripristino di fabbrica. Assicurati di prima scaricare un backup del sistema prima di continuare, e poi caricare questo file dopo l\'installazione della nuova versione.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Stai aggiornando a una nuova versione principale. Assicurati di aver letto il ChangeLog per qualsiasi cambiamento importante.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Stai aggiornando a una nuova versione major. È consigliabile prima creare un backup del sistema. Controlla anche l\'aiuto online per eventuali modifiche importanti.',
  WARNING_SYSTEM_BACKUP: 'Questo creerà un backup delle tue configurazioni e impostazioni complete. Tutte le password saranno leggibili nel file di backup. Sei sicuro di voler continuare?'

 };
@@ -363,7 +363,7 @@ const nl: Translation = {
  ONLINE_HELP: 'online help',
  UPGRADE_IMPORTANT_MESSAGES: 'Upgrade Belangrijke Berichten',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Deze upgrade vereist een fabrieksinstelling. Zorg ervoor dat u eerst een Systeem Backup download voordat u doorgaat, en upload deze file na de installatie van de nieuwe versie.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'U updatet naar een nieuwe grote versie. Zorg ervoor dat u de ChangeLog hebt gelezen voor alle brekende wijzigingen.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'U updatet naar een nieuwe major versie. Het is raadzaam om eerst een systeem backup te maken. Controleer ook de online help voor eventuele brekende wijzigingen.',
  WARNING_SYSTEM_BACKUP: 'Dit zal een back-up van uw volledige systeemconfiguratie en instellingen maken. Alle wachtwoorden zijn leesbaar in het back-upbestand. Wees voorzichtig bij delen! Wilt u doorgaan?'

 };
@@ -363,7 +363,7 @@ const no: Translation = {
  ONLINE_HELP: 'online hjelp',
  UPGRADE_IMPORTANT_MESSAGES: 'Oppdater viktige meldinger',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Denne oppdateringen krever en fabriksinstilling. Sørg for at du først lastet ned en System Backup før du fortsetter, og last denne filen etter at den nye versjonen er installert.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Du oppdaterer til en ny hovedversjon. Sørg for at du har lest ChangeLog for eventuelle bruddende endringer.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Du oppdaterer til en ny major versjon. Det er anbefalt å først lage en systembackup. Kontroller også onlinehjelp for eventuelle viktige endringer.',
  WARNING_SYSTEM_BACKUP: 'Dette vil lage en sikkerhetskopi av din fullstendige systemkonfigurasjon og innstillinger. Alle passord vil være lesbare i sikkerhetskopien. Vær forsiktig med deling! Vil du fortsette?'

 };
@@ -363,7 +363,7 @@ const pl: BaseTranslation = {
  ONLINE_HELP: 'pomoc online',
  UPGRADE_IMPORTANT_MESSAGES: 'Aktualizuj ważne wiadomości',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Ta aktualizacja wymaga resetu fabrycznego. Upewnij się, że najpierw pobierzesz kopię zapasową systemu przed kontynuowaniem, a następnie przesuń tę plik po zainstalowaniu nowej wersji.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Aktualizujesz się do nowej głównej wersji. Upewnij się, że przeczytałeś ChangeLog dla wszelkich istotnych zmian.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Aktualizujesz się na nową major wersję. Jest to zalecane, aby najpierw utworzyć kopię zapasową systemu. Sprawdź również online pomoc dla ewentualnych istotnych zmian.',
  WARNING_SYSTEM_BACKUP: 'To spowoduje utworzenie kopii zapasowej całej konfiguracji i ustawień systemu. Wszystkie hasła będą widoczne w pliku kopii zapasowej. Bądź ostrożny przy udostępnianiu! Chcesz kontynuować?'

 };
@@ -363,7 +363,7 @@ const sk: Translation = {
  ONLINE_HELP: 'online pomoc',
  UPGRADE_IMPORTANT_MESSAGES: 'Aktualizovať dôležité správy',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Táto aktualizácia vyžaduje reštart základných nastavení. Uistite sa, že najprv stiahnete systémovú zálohu pred pokračovaním, a potom nahrajte tento súbor po instalácii novej verzie.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Aktualizujete sa na novú hlavnú verziu. Uistite sa, že ste prečítali ChangeLog pre akékoľvek dôležité zmeny.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Aktualizujete sa na novú major verziu. Je vhodné najprv vytvoriť systémovú zálohu. Taktiež skontrolujte online nápovľu pre akékoľvek dôležité zmeny.',
  WARNING_SYSTEM_BACKUP: 'Toto vytvorí zálohu všetkých vašich celých systémových konfigurácií a nastavení. Všetky hesla budú čitateľné v zálohovom súbore. Buďte opatrní pri zdieľaní! Chcete pokračovať?'

 };
@@ -363,7 +363,7 @@ const sv: Translation = {
  ONLINE_HELP: 'online hjälp',
  UPGRADE_IMPORTANT_MESSAGES: 'Uppdatera viktiga meddelanden',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Denna uppdatering kräver en fabriksåterställning. Se till att du först laddar ned en System Backup innan du fortsätter, och ladda upp denna fil efter att den nya versionen är installerad.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Du uppdaterar till en ny huvudversion. Se till att du har läst ChangeLog för eventuella brkande ändringar.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Du uppdaterar till en ny major version. Det är rekommenderat att först skapa en systembackup. Kontrollera också onlinehjälpen för eventuella viktiga ändringar.',
  WARNING_SYSTEM_BACKUP: 'Detta kommer att skapa en säkerhetskopia av din fullständiga systemkonfiguration och inställningar. Alla lösenord kommer att vara läsbara i säkerhetskopien. Var försiktig med att dela! Vill du fortsätta?'

 };
@@ -363,7 +363,7 @@ const tr: Translation = {
  ONLINE_HELP: 'online yardım',
  UPGRADE_IMPORTANT_MESSAGES: 'Önemli Mesajları Güncelle',
  UPGRADE_IMPORTANT_MESSAGES_1: 'Bu güncelleme továrnı ayarlarını gerektirir. Yapılandırmanızı ve ayarlarınızı önce yedekleyin ve ardından yeni sürüm yüklendikten sonra yükleyin.',
-  UPGRADE_IMPORTANT_MESSAGES_2: 'Yeni bir büyük sürüme yükselteceksiniz. Değişiklikleri ChangeLogı okuduğunuzdan emin olun.',
+  UPGRADE_IMPORTANT_MESSAGES_2: 'Yeni bir major sürüme güncelleme yapıyorsunuz. Sistem yedeklemesi yapmanız önerilir. Ayrıca online yardımı kontrol ederek önemli değişiklikleri gözden geçirin.',
  WARNING_SYSTEM_BACKUP: 'Bu, sistem yapılandırmanızı ve ayarlarınızın bir yedeklemesi oluşturacaktır. Tüm şifreler yedekleme dosyasında okunabilir olacaktır. Paylaşırken dikkatli olun! Devam etmek istediğinize emin misiniz?'

 };
@@ -16,6 +16,9 @@ export interface NTPSettingsType {
  server: string;
  tz_label: string;
  tz_format: string;
+  thermostat_sync: number;
+  tz_label_t: string;
+  tz_format_t: string;
 }

 export interface Time {
@@ -147,7 +147,5 @@ double ledcSetup(uint8_t chan, double freq, uint8_t bit_num) {
 void ledcAttachPin(uint8_t pin, uint8_t chan) {};
 void ledcAttach(uint8_t pin, uint8_t chan, uint8_t bit_num) {};
 void ledcWrite(uint8_t chan, uint32_t duty) {};
-void neopixelWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val) {};
-void rgbLedWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val) {};

 #endif
@@ -74,8 +74,6 @@ double ledcSetup(uint8_t chan, double freq, uint8_t bit_num);
 void   ledcAttachPin(uint8_t pin, uint8_t chan);
 void   ledcAttach(uint8_t pin, uint8_t chan, uint8_t bit_num);
 void   ledcWrite(uint8_t chan, uint32_t duty);
-void   neopixelWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val);
-void   rgbLedWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val);

 inline int rtc_get_reset_reason(int cpu_no) {
    return 0;
@@ -79,8 +79,12 @@ class DummySettings {
    uint8_t provisionMode = 0;

    // NTP
-    String server  = "pool.ntp.org";
-    String tzLabel = "Europe/London";
+    String  server          = "pool.ntp.org";
+    String  tzLabel         = "Europe/London";
+    String  tzFormat        = "GMT0BST,M3.5.0/1,M10.5.0";
+    String  tzLabelT        = "Europe/Berlin";
+    String  tzFormatT       = "CET-1CEST,M3.5.0,M10.5.0/3";
+    uint8_t thermostat_sync = 0;

    static void read(DummySettings & settings, JsonObject root) {};
    static void read(DummySettings & settings) {};
@@ -2,6 +2,7 @@
  "name": "mock-api",
  "version": "3.8.2",
  "description": "mock api for EMS-ESP",
+  "type": "module",
  "author": "proddy, emsesp.org",
  "license": "MIT",
  "scripts": {
@@ -12,8 +13,8 @@
    "@msgpack/msgpack": "^3.1.3",
    "@trivago/prettier-plugin-sort-imports": "^6.0.2",
    "formidable": "^3.5.4",
-    "itty-router": "^5.0.23",
-    "prettier": "^3.8.3"
+    "itty-router": "^5.0.24",
+    "prettier": "^3.9.6"
  },
  "packageManager": "pnpm@10.33.4+sha512.1c67b3b359b2d408119ba1ed289f34b8fc3c6873412bec6fd264fbdc82489e510fcbecb9ce9d22dae7f3b76269d8441046014bdca53b9979cd7a561ad631b800"
 }
@@ -13,54 +13,54 @@ importers:
        version: 3.1.3
      '@trivago/prettier-plugin-sort-imports':
        specifier: ^6.0.2
-        version: 6.0.2(prettier@3.8.3)
+        version: 6.0.2(prettier@3.9.6)
      formidable:
        specifier: ^3.5.4
        version: 3.5.4
      itty-router:
-        specifier: ^5.0.23
-        version: 5.0.23
+        specifier: ^5.0.24
+        version: 5.0.24
      prettier:
-        specifier: ^3.8.3
-        version: 3.8.3
+        specifier: ^3.9.6
+        version: 3.9.6

 packages:

-  '@babel/code-frame@7.29.0':
-    resolution: {integrity: sha512-9NhCeYjq9+3uxgdtp20LSiJXJvN0FeCtNGpJxuMFZ1Kv3cWUNb6DOhJwUvcVCzKGR66cw4njwM6hrJLqgOwbcw==}
+  '@babel/code-frame@7.29.7':
+    resolution: {integrity: sha512-Aup7aUOfpbAUg2ROOJN6Iw5f9DMBlzu0mIkm/malLQFN/YQgO48wCj0Kxa3sEHJvPVFg7siR+qRInwXd2qhQKw==}
    engines: {node: '>=6.9.0'}

-  '@babel/generator@7.29.1':
-    resolution: {integrity: sha512-qsaF+9Qcm2Qv8SRIMMscAvG4O3lJ0F1GuMo5HR/Bp02LopNgnZBC/EkbevHFeGs4ls/oPz9v+Bsmzbkbe+0dUw==}
+  '@babel/generator@7.29.8':
+    resolution: {integrity: sha512-gZbepsdh3WDtgZKWL+vTPh71LSBrm/Y4/QDZBVCcYfmeTEEuoOYwlSy+G1StfJg+/Zy550u/3TATbm7qDbbMtg==}
    engines: {node: '>=6.9.0'}

-  '@babel/helper-globals@7.28.0':
-    resolution: {integrity: sha512-+W6cISkXFa1jXsDEdYA8HeevQT/FULhxzR99pxphltZcVaugps53THCeiWA8SguxxpSp3gKPiuYfSWopkLQ4hw==}
+  '@babel/helper-globals@7.29.7':
+    resolution: {integrity: sha512-3nQVUAtvkKH9zahfWgw96Jc/uFOmjACE1kQz82E2lqWmHBgjzbNlsC22nuQTfahmWeQtTq5nQ/4Nnd2A1wj4zA==}
    engines: {node: '>=6.9.0'}

-  '@babel/helper-string-parser@7.27.1':
-    resolution: {integrity: sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA==}
+  '@babel/helper-string-parser@7.29.7':
+    resolution: {integrity: sha512-Pb5ijPrZ89GDH8223L4UP8i6QApWxs04RbPQJTeWDV0/keR2E36MeKnyr6LYmUUvqRRI+Iv87SuF1W6ErINzYw==}
    engines: {node: '>=6.9.0'}

-  '@babel/helper-validator-identifier@7.28.5':
-    resolution: {integrity: sha512-qSs4ifwzKJSV39ucNjsvc6WVHs6b7S03sOh2OcHF9UHfVPqWWALUsNUVzhSBiItjRZoLHx7nIarVjqKVusUZ1Q==}
+  '@babel/helper-validator-identifier@7.29.7':
+    resolution: {integrity: sha512-qehxGkRj55h/ff8EMaJ+cYhyaKlHIxqYDn682wQD7RNp9UujOQsHog2uS0r2vzr4pW+sXf90NeeayjcNaX3fFg==}
    engines: {node: '>=6.9.0'}

-  '@babel/parser@7.29.3':
-    resolution: {integrity: sha512-b3ctpQwp+PROvU/cttc4OYl4MzfJUWy6FZg+PMXfzmt/+39iHVF0sDfqay8TQM3JA2EUOyKcFZt75jWriQijsA==}
+  '@babel/parser@7.29.8':
+    resolution: {integrity: sha512-E8lTAYNB1KW+FH+VGJuZM1ioAx2E6oVlvQFRrf5P8ZZmsiJXYAD9vTFV7yyEURNzgh1dFqMZuO6tUwcARbqFCA==}
    engines: {node: '>=6.0.0'}
    hasBin: true

-  '@babel/template@7.28.6':
-    resolution: {integrity: sha512-YA6Ma2KsCdGb+WC6UpBVFJGXL58MDA6oyONbjyF/+5sBgxY/dwkhLogbMT2GXXyU84/IhRw/2D1Os1B/giz+BQ==}
+  '@babel/template@7.29.7':
+    resolution: {integrity: sha512-puq+Gf35oI24FeN11LkoUQFqv9uwNeWpxXZi/Ji3rRIoKAzKnxRaZ+Gkj0vKS9ZCiTESfng1N9LyOyXvo+m+Gg==}
    engines: {node: '>=6.9.0'}

-  '@babel/traverse@7.29.0':
-    resolution: {integrity: sha512-4HPiQr0X7+waHfyXPZpWPfWL/J7dcN1mx9gL6WdQVMbPnF3+ZhSMs8tCxN7oHddJE9fhNE7+lxdnlyemKfJRuA==}
+  '@babel/traverse@7.29.8':
+    resolution: {integrity: sha512-I5z7H3bf/41ktsNVLtpN0wAa336HkqIHQ5BuPLEhTkt1jVSyZpeNKIzTgEWmlxjdg81R0IgUCcaE+Ok3NvrfZg==}
    engines: {node: '>=6.9.0'}

-  '@babel/types@7.29.0':
-    resolution: {integrity: sha512-LwdZHpScM4Qz8Xw2iKSzS+cfglZzJGvofQICy7W7v4caru4EaAmyUuO6BGrbyQ2mYV11W0U8j5mBhd14dd3B0A==}
+  '@babel/types@7.29.8':
+    resolution: {integrity: sha512-Vj1jF3cPfxg7OAfoI7QnVKLoILlm2JF9pnVHrX8qx7AHMiYWT+NDAA7jChlNgRS4WTLc/fD1lXLmPixluj+3Gg==}
    engines: {node: '>=6.9.0'}

  '@jridgewell/gen-mapping@0.3.13':
@@ -112,8 +112,8 @@ packages:
  balanced-match@1.0.2:
    resolution: {integrity: sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==}

-  brace-expansion@2.1.0:
-    resolution: {integrity: sha512-TN1kCZAgdgweJhWWpgKYrQaMNHcDULHkWwQIspdtjV4Y5aurRdZpjAqn6yX3FPqTA9ngHCc4hJxMAMgGfve85w==}
+  brace-expansion@2.1.4:
+    resolution: {integrity: sha512-hGfVzPxthbf3+2yjg/RBs60cB0FhqBS/zvdV/4wn4/BmN0bNMMHPc4V/BbFieqf1TKAGGAHnY4eSjajCl0f2Xg==}

  debug@4.4.3:
    resolution: {integrity: sha512-RGwwWnwQvkVfavKVt22FGLw+xYSdzARwm0ru6DhTVA3umU5hZc28V3kO4stgYryrTlLpuvgI9GiijltAjNbcqA==}
@@ -131,8 +131,8 @@ packages:
    resolution: {integrity: sha512-YikH+7CUTOtP44ZTnUhR7Ic2UASBPOqmaRkRKxRbywPTe5VxF7RRCck4af9wutiZ/QKM5nME9Bie2fFaPz5Gug==}
    engines: {node: '>=14.0.0'}

-  itty-router@5.0.23:
-    resolution: {integrity: sha512-i49WU+SNPrwOZA4Z61En1RYd5h2Lcqa+5IvCpMrNi4dxymzJK15ozUUnRrWIUAv95Zamd4eJPAot2UvHRrQg7w==}
+  itty-router@5.0.24:
+    resolution: {integrity: sha512-PXij1qGKtE6jg3dLgrTRdh/Frovl5Wc4Av67sD2xfhDPrgNt4u79++/il8/c/OfZGkhD/8uYJub8tjo+H165rA==}

  javascript-natural-sort@0.7.1:
    resolution: {integrity: sha512-nO6jcEfZWQXDhOiBtG2KvKyEptz7RVbpGP4vTD2hLBdmNQSsCiicO2Ioinv6UI4y9ukqnBpy+XZ9H6uLNgJTlw==}
@@ -167,8 +167,8 @@ packages:
  picocolors@1.1.1:
    resolution: {integrity: sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA==}

-  prettier@3.8.3:
-    resolution: {integrity: sha512-7igPTM53cGHMW8xWuVTydi2KO233VFiTNyF5hLJqpilHfmn8C8gPf+PS7dUT64YcXFbiMGZxS9pCSxL/Dxm/Jw==}
+  prettier@3.9.6:
+    resolution: {integrity: sha512-OpN0zzVdiaiAhxpuuj5efpIS4sY9j7bY6uR5mnj5yPzGkdkjNKSJeUThPb60Jw29QuAZgA4o+/iB49kFiaBX6g==}
    engines: {node: '>=14'}
    hasBin: true

@@ -177,52 +177,52 @@ packages:

 snapshots:

-  '@babel/code-frame@7.29.0':
+  '@babel/code-frame@7.29.7':
    dependencies:
-      '@babel/helper-validator-identifier': 7.28.5
+      '@babel/helper-validator-identifier': 7.29.7
      js-tokens: 4.0.0
      picocolors: 1.1.1

-  '@babel/generator@7.29.1':
+  '@babel/generator@7.29.8':
    dependencies:
-      '@babel/parser': 7.29.3
-      '@babel/types': 7.29.0
+      '@babel/parser': 7.29.8
+      '@babel/types': 7.29.8
      '@jridgewell/gen-mapping': 0.3.13
      '@jridgewell/trace-mapping': 0.3.31
      jsesc: 3.1.0

-  '@babel/helper-globals@7.28.0': {}
+  '@babel/helper-globals@7.29.7': {}

-  '@babel/helper-string-parser@7.27.1': {}
+  '@babel/helper-string-parser@7.29.7': {}

-  '@babel/helper-validator-identifier@7.28.5': {}
+  '@babel/helper-validator-identifier@7.29.7': {}

-  '@babel/parser@7.29.3':
+  '@babel/parser@7.29.8':
    dependencies:
-      '@babel/types': 7.29.0
+      '@babel/types': 7.29.8

-  '@babel/template@7.28.6':
+  '@babel/template@7.29.7':
    dependencies:
-      '@babel/code-frame': 7.29.0
-      '@babel/parser': 7.29.3
-      '@babel/types': 7.29.0
+      '@babel/code-frame': 7.29.7
+      '@babel/parser': 7.29.8
+      '@babel/types': 7.29.8

-  '@babel/traverse@7.29.0':
+  '@babel/traverse@7.29.8':
    dependencies:
-      '@babel/code-frame': 7.29.0
-      '@babel/generator': 7.29.1
-      '@babel/helper-globals': 7.28.0
-      '@babel/parser': 7.29.3
-      '@babel/template': 7.28.6
-      '@babel/types': 7.29.0
+      '@babel/code-frame': 7.29.7
+      '@babel/generator': 7.29.8
+      '@babel/helper-globals': 7.29.7
+      '@babel/parser': 7.29.8
+      '@babel/template': 7.29.7
+      '@babel/types': 7.29.8
      debug: 4.4.3
    transitivePeerDependencies:
      - supports-color

-  '@babel/types@7.29.0':
+  '@babel/types@7.29.8':
    dependencies:
-      '@babel/helper-string-parser': 7.27.1
-      '@babel/helper-validator-identifier': 7.28.5
+      '@babel/helper-string-parser': 7.29.7
+      '@babel/helper-validator-identifier': 7.29.7

  '@jridgewell/gen-mapping@0.3.13':
    dependencies:
@@ -246,17 +246,17 @@ snapshots:
    dependencies:
      '@noble/hashes': 1.8.0

-  '@trivago/prettier-plugin-sort-imports@6.0.2(prettier@3.8.3)':
+  '@trivago/prettier-plugin-sort-imports@6.0.2(prettier@3.9.6)':
    dependencies:
-      '@babel/generator': 7.29.1
-      '@babel/parser': 7.29.3
-      '@babel/traverse': 7.29.0
-      '@babel/types': 7.29.0
+      '@babel/generator': 7.29.8
+      '@babel/parser': 7.29.8
+      '@babel/traverse': 7.29.8
+      '@babel/types': 7.29.8
      javascript-natural-sort: 0.7.1
      lodash-es: 4.18.1
      minimatch: 9.0.9
      parse-imports-exports: 0.2.4
-      prettier: 3.8.3
+      prettier: 3.9.6
    transitivePeerDependencies:
      - supports-color

@@ -264,7 +264,7 @@ snapshots:

  balanced-match@1.0.2: {}

-  brace-expansion@2.1.0:
+  brace-expansion@2.1.4:
    dependencies:
      balanced-match: 1.0.2

@@ -283,7 +283,7 @@ snapshots:
      dezalgo: 1.0.4
      once: 1.4.0

-  itty-router@5.0.23: {}
+  itty-router@5.0.24: {}

  javascript-natural-sort@0.7.1: {}

@@ -295,7 +295,7 @@ snapshots:

  minimatch@9.0.9:
    dependencies:
-      brace-expansion: 2.1.0
+      brace-expansion: 2.1.4

  ms@2.1.3: {}

@@ -311,6 +311,6 @@ snapshots:

  picocolors@1.1.1: {}

-  prettier@3.8.3: {}
+  prettier@3.9.6: {}

  wrappy@1.0.2: {}
@@ -141,8 +141,8 @@ let system_status = {
 let DEV_VERSION_IS_UPGRADEABLE: boolean;
 let STABLE_VERSION_IS_UPGRADEABLE: boolean;
 let THIS_VERSION: string;
-let LATEST_STABLE_VERSION = '3.8.2';
-let LATEST_DEV_VERSION = '3.8.3-dev.2';
+let LATEST_STABLE_VERSION = '3.8.3';
+let LATEST_DEV_VERSION = '3.9.0-dev.0';

 // scenarios for testing versioning
 let version_test = 0; // on latest stable, or switch to dev
@@ -302,10 +302,10 @@ function updateMask(entity: any, de: any, dd: any) {
      const old_custom_name = dd.nodes[dd_objIndex].cn;
      console.log(
        'comparing names, old (' +
-          old_custom_name +
-          ') with new (' +
-          new_custom_name +
-          ')'
+        old_custom_name +
+        ') with new (' +
+        new_custom_name +
+        ')'
      );
      if (old_custom_name !== new_custom_name) {
        changed = true;
@@ -395,23 +395,32 @@ function custom_support() {
 }

 // called by Action endpoint upgradeImportantMessages
+// 0 is do nothing
+// 1 is a special upgrade and needs an export->factory reset->import
+// 2 is a major upgrade
 function upgradeImportantMessages(version: string) {
-  // 0 is do nothing
-  // 1 means 3.9 and factory reset required
-  // 2 means a major version upgrade
  let upgradeImportantMessageType_n = 0;

-  // see if its a filename with a .bin extension
-  if (version.endsWith('.bin')) {
-    upgradeImportantMessageType_n = 1; // 1 means 3.9 and factory reset required
-  } else if (version.endsWith('.md')) {
-    upgradeImportantMessageType_n = 0;
+  // check file extensions first
+  if (version.endsWith('.md5') || version.endsWith('.json')) {
+    upgradeImportantMessageType_n = 0; // digest / backup restore: no upgrade warning
+  } else if (version.endsWith('.bin')) {
+    // extract the version number from the filename and if its going from 3.8.x to 3.9.x, then set upgradeImportantMessageType_n to 1
+    const versionNumber = version.split('.');
+    if (versionNumber[0] === '3' && versionNumber[1] === '8') {
+      upgradeImportantMessageType_n = 2; // major upgrade
+    }
  } else {
-    // this is a version string like "3.9.0"
-    upgradeImportantMessageType_n = 2;
+    // the parameter is a version string like "3.9.0"
+    upgradeImportantMessageType_n = 2; // major upgrade
  }

-  console.log('upgradeImportantMessageType: ' + upgradeImportantMessageType_n);
+  console.log(
+    'upgradeImportantMessageType: version=' +
+    version +
+    ' type=' +
+    upgradeImportantMessageType_n
+  );
  return { upgradeImportantMessageType: upgradeImportantMessageType_n };
 }

@@ -424,15 +433,15 @@ function check_upgrade(version: string) {

    console.log(
      'Upgrade this version (' +
-        THIS_VERSION +
-        ') to dev (' +
-        dev_version +
-        ') is ' +
-        (DEV_VERSION_IS_UPGRADEABLE ? 'YES' : 'NO') +
-        ' and to stable (' +
-        stable_version +
-        ') is ' +
-        (STABLE_VERSION_IS_UPGRADEABLE ? 'YES' : 'NO')
+      THIS_VERSION +
+      ') to dev (' +
+      dev_version +
+      ') is ' +
+      (DEV_VERSION_IS_UPGRADEABLE ? 'YES' : 'NO') +
+      ' and to stable (' +
+      stable_version +
+      ') is ' +
+      (STABLE_VERSION_IS_UPGRADEABLE ? 'YES' : 'NO')
    );
    data = {
      emsesp_version: THIS_VERSION,
@@ -4139,7 +4148,7 @@ let emsesp_schedule = {
      id: 5,
      active: false,
      flags: 130,
-      time: 'system/network info/rssi < -70',
+      time: 'system/network/rssi < -70',
      cmd: 'system/restart',
      value: '',
      name: 'bad_wifi'
@@ -39,7 +39,7 @@ build_flags =
  -D CONFIG_ASYNC_TCP_PRIORITY=10 ; default
  -D CONFIG_ASYNC_TCP_QUEUE_SIZE=64 ; default
  -D CONFIG_ASYNC_TCP_RUNNING_CORE=1 ; force async_tcp task to be on same core as Arduino app (default is any core)
-  -D CONFIG_ASYNC_TCP_STACK_SIZE=6144 ; default is 16KB/8192*2
+  -D CONFIG_ASYNC_TCP_STACK_SIZE=8192 ; default is 16KB/8192*2
  ; ESPAsyncWebServer
  ; -D WS_MAX_QUEUED_MESSAGES=0 ; not used, default 8
  ; -D SSE_MAX_QUEUED_MESSAGES=1 ; for log messages, default 32
@@ -105,7 +105,7 @@ board_build.filesystem = littlefs
 lib_deps =
  bblanchon/ArduinoJson @ 7.4.3
  ESP32Async/AsyncTCP @ 3.4.10
-  ESP32Async/ESPAsyncWebServer @ 3.11.0
+  ESP32Async/ESPAsyncWebServer @ 3.11.2
  ; https://github.com/emsesp/EMS-ESP-Modules.git @ 1.0.8

 ; builds the web interface only, not the firmware
@@ -776,7 +776,6 @@ negcond
 negheat
 nein
 nennvolumentstrom
-neopixel
 netcmp
 netflowtemp
 netif
@@ -88,34 +88,6 @@ def bin_copy(source, target, env):
    print(f"MD5: {md5_hash}")
    md5_file.write_text(md5_hash)

-    # Make a copy using the old 3.6.x filename format for backwards compatibility
-    # Note: there is a chance newer E32V2s (which use the 16MB partition table and PSRAM) 
-    # are running a custom build of the 3.6.5 firmware as 3.6.5 was released before 
-    # production of the gateway board. Updating via the WebUI will break the system 
-    # and require a manual update.
-    
-    pio_env = env.get('PIOENV', '')
-    extra_variant = None
-    
-    if pio_env == "s3_16M_P":
-        extra_variant = f"EMS-ESP-{app_version.replace('.', '_')}-ESP32_S3"
-    elif pio_env == "s_4M":
-        extra_variant = f"EMS-ESP-{app_version.replace('.', '_')}-ESP32"
-
-    if extra_variant:
-        extra_bin_file = firmware_dir / f"{extra_variant}.bin"
-        extra_md5_file = firmware_dir / f"{extra_variant}.md5"
-        
-        # Remove existing files if they exist
-        for file_path in [extra_bin_file, extra_md5_file]:
-            if file_path.exists():
-                file_path.unlink()
-        
-        # Copy files
-        shutil.copy2(str(bin_file), str(extra_bin_file))
-        shutil.copy2(str(md5_file), str(extra_md5_file))
-        print(f"Filename copy for 3.6.x: {extra_bin_file}")
-
    print("=" * 90)


@@ -3,28 +3,34 @@
 # run from root folder, like `sh ./scripts/update_all.sh`
 # as well as GNUMake (make) and python3

+# abort on first error so a failed lint/build isn't silently swallowed
+set -e
+
 cd interface
 rm -rf node_modules
-corepack use pnpm@latest-10
-pnpm update --latest
+corepack use pnpm@latest
+pnpm update
 pnpm install
 pnpm format
 pnpm lint
+pnpm build-webUI

 cd ../mock-api
 rm -rf node_modules
-corepack use pnpm@latest-10
-pnpm update --latest
+corepack use pnpm@latest
+pnpm update
 pnpm install
 pnpm format

-cd ..
-cd interface
-pnpm build-webUI
-
 cd ..
 npx cspell "**"

-# platformio run -e build_modbus
-# platformio run -e build_standalone
-# platformio run -e native-test -t exec
+# build files that go into docs folder
+
+platformio run -e build_modbus -t clean
+platformio run -e build_modbus
+platformio run -e build_standalone -t clean
+platformio run -e build_standalone
+
+# run tests
+platformio run -e native-test -t exec
@@ -86,16 +86,22 @@ void NTPSettingsService::ntp_received(struct timeval * tv) {
 }

 void NTPSettings::read(NTPSettings & settings, JsonObject root) {
-    root["enabled"]   = settings.enabled;
-    root["server"]    = settings.server;
-    root["tz_label"]  = settings.tzLabel;
-    root["tz_format"] = settings.tzFormat;
+    root["enabled"]         = settings.enabled;
+    root["server"]          = settings.server;
+    root["tz_label"]        = settings.tzLabel;
+    root["tz_format"]       = settings.tzFormat;
+    root["thermostat_sync"] = settings.thermostat_sync;
+    root["tz_label_t"]      = settings.tzLabelT;
+    root["tz_format_t"]     = settings.tzFormatT;
 }

 StateUpdateResult NTPSettings::update(JsonObject root, NTPSettings & settings) {
-    settings.enabled  = root["enabled"] | FACTORY_NTP_ENABLED;
-    settings.server   = root["server"] | FACTORY_NTP_SERVER;
-    settings.tzLabel  = root["tz_label"] | FACTORY_NTP_TIME_ZONE_LABEL;
-    settings.tzFormat = root["tz_format"] | FACTORY_NTP_TIME_ZONE_FORMAT;
+    settings.enabled         = root["enabled"] | FACTORY_NTP_ENABLED;
+    settings.server          = root["server"] | FACTORY_NTP_SERVER;
+    settings.tzLabel         = root["tz_label"] | FACTORY_NTP_TIME_ZONE_LABEL;
+    settings.tzFormat        = root["tz_format"] | FACTORY_NTP_TIME_ZONE_FORMAT;
+    settings.thermostat_sync = root["thermostat_sync"] | FACTORY_NTP_THERMOSTAT_SYNC;
+    settings.tzLabelT        = root["tz_label_t"] | FACTORY_NTP_TIME_ZONE_LABEL;
+    settings.tzFormatT       = root["tz_format_t"] | FACTORY_NTP_TIME_ZONE_FORMAT;
    return StateUpdateResult::CHANGED;
-}
+}
@@ -19,6 +19,10 @@
 #define FACTORY_NTP_TIME_ZONE_FORMAT "GMT0BST,M3.5.0/1,M10.5.0"
 #endif

+#ifndef FACTORY_NTP_THERMOSTAT_SYNC
+#define FACTORY_NTP_THERMOSTAT_SYNC 1
+#endif
+
 #ifndef FACTORY_NTP_SERVER
 #define FACTORY_NTP_SERVER "time.google.com"
 #endif
@@ -30,10 +34,13 @@

 class NTPSettings {
  public:
-    bool   enabled  = FACTORY_NTP_ENABLED;
-    String tzLabel  = FACTORY_NTP_TIME_ZONE_LABEL;
-    String tzFormat = FACTORY_NTP_TIME_ZONE_FORMAT;
-    String server   = FACTORY_NTP_SERVER;
+    bool    enabled         = FACTORY_NTP_ENABLED;
+    String  tzLabel         = FACTORY_NTP_TIME_ZONE_LABEL;
+    String  tzFormat        = FACTORY_NTP_TIME_ZONE_FORMAT;
+    String  server          = FACTORY_NTP_SERVER;
+    uint8_t thermostat_sync = FACTORY_NTP_THERMOSTAT_SYNC;
+    String  tzLabelT        = FACTORY_NTP_TIME_ZONE_LABEL;
+    String  tzFormatT       = FACTORY_NTP_TIME_ZONE_FORMAT;

    static void              read(NTPSettings & settings, JsonObject root);
    static StateUpdateResult update(JsonObject root, NTPSettings & settings);
@@ -4,7 +4,6 @@

 #include <esp_app_format.h>
 #include <esp_ota_ops.h>
-// #include <esp_partition.h>

 static String getFilenameExtension(const String & filename) {
    const auto pos = filename.lastIndexOf('.');
@@ -49,7 +48,7 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
            // LittleFS filesystem image
            _is_filesystem = true;
            _md5[0]        = '\0'; // clear any stale md5 so Update.end() doesn't compare against it
-        } else if ((extension == "bin") && (filesize > 2000000)) {
+        } else if ((extension == "bin") && (filesize > 1000000)) {
            _is_firmware = true;
        } else if (extension == "json") {
            _md5[0] = '\0'; // clear md5
@@ -133,9 +132,10 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
    }

    if (_is_firmware || _is_filesystem) {
-        if (!request->_tempObject) { // if we haven't delt with an error, continue with the OTA update
+        if (!request->_tempObject) {
+            //continue with the OTA update
            if (Update.write(data, len) != len) {
-                emsesp::EMSESP::logger().err("Update.write failed at offset %u (chunk %u): %s",
+                emsesp::EMSESP::logger().err("OTA update failed at offset %u (chunk %u): %s",
                                             static_cast<unsigned>(Update.progress()),
                                             static_cast<unsigned>(len),
                                             Update.errorString());
@@ -144,15 +144,16 @@ void UploadFileService::handleUpload(AsyncWebServerRequest * request, const Stri
            }
            if (final) {
                if (!Update.end(true)) {
-                    emsesp::EMSESP::logger().err("Update.end failed: %s", Update.errorString());
-                    handleError(request, 500);
+                    emsesp::EMSESP::logger().err("OTA update failed: %s", Update.errorString());
+                    handleError(request, 500); // internal error, failed
                    return;
                }
            }
-        } else {
-            if (len && len != request->_tempFile.write(data, len)) { // stream the incoming chunk to the opened file
-                handleError(request, 507);                           // 507-Insufficient Storage
-            }
+        }
+    } else {
+        // stream the incoming chunk to the opened file
+        if (len && len != request->_tempFile.write(data, len)) {
+            handleError(request, 507); // 507-Insufficient Storage
        }
    }
 }
@@ -15,7 +15,7 @@ void WiFiScanner::scanNetworks(AsyncWebServerRequest * request) {

    if (WiFi.scanComplete() != -1) {
        WiFi.scanDelete();
-        WiFi.scanNetworks(true);
+        WiFi.scanNetworks(true, false, true, 250);
    }
 }

@@ -38,6 +38,10 @@ void WiFiScanner::listNetworks(AsyncWebServerRequest * request) {
    } else if (numNetworks == -1) {
        request->send(202); // special code to indicate scan in progress
    } else {
-        scanNetworks(request);
+        auto *     response = new AsyncJsonResponse(false);
+        JsonObject root     = response->getRoot();
+        root["networks"].to<JsonArray>();
+        response->setLength();
+        request->send(response);
    }
 }
@@ -299,7 +299,7 @@ void AnalogSensor::reload(bool get_nvs) {
            uint8_t  r = v / 10000;
            uint8_t  g = (v - r * 10000) / 100;
            uint8_t  b = v % 100;
-            EMSESP_RGB_WRITE(sensor.gpio(), 2 * r, 2 * g, 2 * b);
+            rgb_led::write(sensor.gpio(), 2 * r, 2 * g, 2 * b);
            LOG_DEBUG("RGB set to %d, %d, %d", r, g, b);
        } else if (sensor.type() == AnalogType::DIGITAL_OUT) {
            LOG_DEBUG("Digital Write on GPIO %02d", sensor.gpio());
@@ -546,11 +546,13 @@ bool AnalogSensor::update(uint8_t gpio, const char * org_name, double offset, do
                if (deleted) {
                    LOG_DEBUG("Removing analog sensor GPIO %02d", gpio);
                    EMSESP::system_.remove_gpio(gpio); // remove from used list only
-                    EMSESP::nvs_.remove(AnalogCustomization.name);
+                    if (EMSESP::nvs_.isKey(AnalogCustomization.name)) {
+                        EMSESP::nvs_.remove(AnalogCustomization.name);
+                    }
                    settings.analogCustomizations.remove(AnalogCustomization);
                } else {
                    // update existing record
-                    if (!strcmp(name, AnalogCustomization.name)) {
+                    if (!strcmp(name, AnalogCustomization.name) && EMSESP::nvs_.isKey(AnalogCustomization.name)) {
                        EMSESP::nvs_.remove(AnalogCustomization.name);
                    }
                    strlcpy(AnalogCustomization.name, name, sizeof(AnalogCustomization.name));
@@ -999,7 +1001,7 @@ bool AnalogSensor::command_setvalue(const char * value, const int8_t gpio) {
                uint8_t r = v / 10000;
                uint8_t g = (v - r * 10000) / 100;
                uint8_t b = v % 100;
-                EMSESP_RGB_WRITE(sensor.gpio(), 2 * r, 2 * g, 2 * b);
+                rgb_led::write(sensor.gpio(), 2 * r, 2 * g, 2 * b);
                LOG_DEBUG("RGB set to %d, %d, %d", r, g, b);
            } else if (sensor.type() == AnalogType::PULSE) {
                uint8_t v = val;
@@ -105,7 +105,7 @@
 {215, DeviceType::THERMOSTAT, "Comfort RF", DeviceFlags::EMS_DEVICE_FLAG_CRF | DeviceFlags::EMS_DEVICE_FLAG_NO_WRITE}, // 0x18
 {216, DeviceType::THERMOSTAT, "CRF200S", DeviceFlags::EMS_DEVICE_FLAG_CRF | DeviceFlags::EMS_DEVICE_FLAG_NO_WRITE}, // 0x18
 {246, DeviceType::THERMOSTAT, "Comfort+2RF", DeviceFlags::EMS_DEVICE_FLAG_CRF | DeviceFlags::EMS_DEVICE_FLAG_NO_WRITE}, // 0x18
-{253, DeviceType::THERMOSTAT, "Rego 3000, UI800, Logamatic BC400", DeviceFlags::EMS_DEVICE_FLAG_BC400}, // 0x10
+{253, DeviceType::THERMOSTAT, "Rego 3000, UI800, Logamatic BC400", DeviceFlags::EMS_DEVICE_FLAG_UI800}, // 0x10

 // Thermostat - Sieger - 0x10 / 0x17
 { 66, DeviceType::THERMOSTAT, "ES72, RC20", DeviceFlags::EMS_DEVICE_FLAG_RC20_N}, // 0x17 or remote
@@ -187,8 +187,9 @@
 { 74, DeviceType::ALERT, "EM10", DeviceFlags::EMS_DEVICE_FLAG_NONE},

 // Gateways - 0x48
-{17, DeviceType::GATEWAY, "MX400", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x48 and 0x4B
-{189, DeviceType::GATEWAY, "KM200, MB LAN 2", DeviceFlags::EMS_DEVICE_FLAG_NONE},
+{17, DeviceType::GATEWAY, "MX400", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x48, 0x4B, or 0x50 as wireless base
+{189, DeviceType::GATEWAY, "KM200, MB LAN 2", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x48
+{222, DeviceType::GATEWAY, "KM300", DeviceFlags::EMS_DEVICE_FLAG_NONE}, // 0x4A
 {252, DeviceType::GATEWAY, "K30RF, MX300", DeviceFlags::EMS_DEVICE_FLAG_NONE},

 // Generic - 0x40 or other with no product-id and no version
@@ -513,6 +513,7 @@ class EMSdevice {
    static constexpr uint8_t EMS_DEVICE_FLAG_CR120       = 16; // mostly like RC300, but some changes
    static constexpr uint8_t EMS_DEVICE_FLAG_CR11        = 17; // CRF200 only monitor
    static constexpr uint8_t EMS_DEVICE_FLAG_HMC310      = 18;
+    static constexpr uint8_t EMS_DEVICE_FLAG_UI800       = 19;

    uint8_t count_entities();
    uint8_t count_entities_fav();
@@ -158,6 +158,7 @@ class DeviceValue {
    enum DeviceValueNumOp : int8_t {
        DV_NUMOP_NONE   = 0, // default
        DV_NUMOP_DIV2   = 2,
+        DV_NUMOP_DIV4   = 4,
        DV_NUMOP_DIV10  = 10,
        DV_NUMOP_DIV60  = 60,
        DV_NUMOP_DIV100 = 100,
@@ -1800,8 +1800,8 @@ void EMSESP::start() {
    LOG_INFO("Library loaded: %d EMS devices, %d device entities, %s", device_library_.size(), EMSESP_TRANSLATION_COUNT, system_.languages_string().c_str());

    webCustomizationService.begin(); // load the customizations
-    webSchedulerService.begin();     // load the scheduler events
    webCustomEntityService.begin();  // load the custom telegram reads
+    webSchedulerService.begin();     // load the scheduler events

    // start telnet service if it's enabled
    // default idle is 10 minutes, default write timeout is 0 (automatic)
@@ -1864,16 +1864,9 @@ void EMSESP::loop() {
    webLogService.loop(); // log in Web UI

    // run the loop, unless we're in the middle of an OTA upload
-    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_NORMAL || EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
-        // check for GPIO Errors - this is called once when booting
-        if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
-            static bool only_once = false;
-            if (!only_once) {
-                LOG_ERROR("Invalid GPIOs used. Please check your settings and the system log");
-                only_once = true;
-            }
-        }
-
+    // if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_NORMAL || EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
+    if (EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_PENDING_UPLOAD
+        && EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_UPLOADING) {
        // loop through the services
        rxservice_.loop();          // process any incoming Rx telegrams
        shower_.loop();             // check for shower on/off
@@ -1887,6 +1880,14 @@ void EMSESP::loop() {
        }
        scheduled_fetch_values(); // force a query on the EMS devices to fetch latest data at a set interval (1 min)
    }
+    // check for GPIO Errors - this is called once when booting
+    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_INVALID_GPIO) {
+        static bool only_once = false;
+        if (!only_once) {
+            LOG_ERROR("Invalid GPIOs used. Please check your settings and the system log");
+            only_once = true;
+        }
+    }

    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_PENDING_UPLOAD) {
        // start an upload from a URL, assuming the URL exists and set from a previous pass
@@ -1899,6 +1900,17 @@ void EMSESP::loop() {
        }
    }

+    // reset status after 5 Minutes
+    if (EMSESP::system_.systemStatus() != SYSTEM_STATUS::SYSTEM_STATUS_NORMAL) {
+        static uint32_t starttime = 0;
+        if (starttime == 0) {
+            starttime = uuid::get_uptime_ms();
+        } else if (uuid::get_uptime_ms() - starttime > 300000) {
+            starttime = 0;
+            EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_NORMAL);
+        }
+    }
+
    // telnet service
 #ifndef EMSESP_STANDALONE
    if (system_.telnet_enabled()) {
@@ -817,7 +817,7 @@ std::string Helpers::toUpper(std::string const & s) {

 // capitalizes one UTF-8 character in char array
 // works with Latin1 (1 byte), Polish and other (2 bytes) characters
-// supports special characters for all 11 supported languages: EN, DE, NL, SV, PL, NO, FR, TR, IT, SK, CZ
+// supports special characters for all 11 supported languages: EN, DE, NL, SV, PL, NO, FR, TR, IT, SK, CS
 #if defined(EMSESP_STANDALONE)
 #pragma GCC diagnostic push
 #pragma GCC diagnostic ignored "-Wtype-limits"
@@ -1033,4 +1033,17 @@ float Helpers::numericoperator2scalefactor(int8_t numeric_operator) {
        return -numeric_operator;
 }

+int16_t Helpers::calc_dew(int16_t temp, uint8_t humi) {
+    if (humi == EMS_VALUE_UINT8_NOTSET || temp == EMS_VALUE_INT16_NOTSET) {
+        return EMS_VALUE_INT16_NOTSET;
+    }
+    const float k2 = 17.62;
+    const float k3 = 243.12;
+    const float t  = (float)temp / 10;
+    const float h  = (float)humi / 100;
+    int16_t     dt = (10 * k3 * (((k2 * t) / (k3 + t)) + log(h)) / (((k2 * k3) / (k3 + t)) - log(h)));
+    return dt;
+}
+
+
 } // namespace emsesp
@@ -84,6 +84,7 @@ class Helpers {
    static uint8_t count_items(const char * const * list);

    static const char * translated_word(const char * const * strings, const bool force_en = false);
+    static int16_t      calc_dew(int16_t temp, uint8_t hum);

 #ifdef EMSESP_STANDALONE
    static char * ultostr(char * ptr, uint32_t value, const uint8_t base);
@@ -190,7 +190,11 @@ MAKE_NOTRANSLATION(rc100, "RC100")
 MAKE_NOTRANSLATION(rc100h, "RC100H")
 MAKE_NOTRANSLATION(tc100, "TC100")
 MAKE_NOTRANSLATION(rc120rf, "RC120RF")
-MAKE_NOTRANSLATION(rc220, "RC220/RT800")
+MAKE_NOTRANSLATION(rc220, "RC220")
+MAKE_NOTRANSLATION(rt800, "RT800")
+MAKE_NOTRANSLATION(cr10, "CR10")
+MAKE_NOTRANSLATION(cr10h, "CR10H")
+MAKE_NOTRANSLATION(cr20rf, "CR20RF")
 MAKE_NOTRANSLATION(single, "single")
 MAKE_NOTRANSLATION(dash, "-")
 MAKE_NOTRANSLATION(BLANK, "")
@@ -370,6 +374,7 @@ MAKE_ENUM(enum_roomsensor, FL_(extern), FL_(intern), FL_(auto))
 MAKE_ENUM(enum_roominfluence, FL_(off), FL_(intern), FL_(extern), FL_(auto))
 MAKE_ENUM(enum_control1, FL_(rc310), FL_(rc200), FL_(rc100), FL_(rc100h), FL_(tc100))
 MAKE_ENUM(enum_control2, FL_(off), FL_(dash), FL_(rc100), FL_(rc100h), FL_(dash), FL_(rc120rf), FL_(rc220), FL_(single)) // BC400
+MAKE_ENUM(enum_control3, FL_(off), FL_(dash), FL_(cr10), FL_(cr10h), FL_(dash), FL_(cr20rf), FL_(rt800), FL_(single)) // UI800

 MAKE_ENUM(enum_switchmode, FL_(off), FL_(eco), FL_(comfort), FL_(heat))
 MAKE_ENUM(enum_switchProgMode, FL_(level), FL_(absolute))
@@ -30,9 +30,9 @@
 #define EMSESP_LOCALE_TR "tr"
 #define EMSESP_LOCALE_IT "it"
 #define EMSESP_LOCALE_SK "sk"
-#define EMSESP_LOCALE_CZ "cz"
+#define EMSESP_LOCALE_CS "cs"

-// IMPORTANT! translations are in the order: en, de, nl, sv, pl, no, fr, tr, it, sk, cz
+// IMPORTANT! translations are in the order: en, de, nl, sv, pl, no, fr, tr, it, sk, cs
 //
 // if there is no translation, it will default to en

@@ -292,7 +292,7 @@ MAKE_WORD_TRANSLATION(curve, "heatingcurve", "Heizkurve", "stookkromme", "värme
 MAKE_WORD_TRANSLATION(radiator, "radiator", "Heizkörper", "radiator", "Radiator", "grzejniki", "radiator", "radiateur", "radyatör", "radiatore", "radiátor", "radiátor")
 MAKE_WORD_TRANSLATION(convector, "convector", "Konvektor", "convector", "Konvektor", "konwektory", "konvektor", "convecteur", "convector", "convettore", "konvektor", "konvektor")
 MAKE_WORD_TRANSLATION(floor, "floor", "Fussboden", "vloer", "Golv", "podłoga", "gulv", "sol", "yer", "pavimento", "podlaha", "podlaha")
-MAKE_WORD_TRANSLATION(roomflow, "roomflow", "Raum Fluß", "kamer doorstroming", "Rumsflöde", "przepływ w pomieszczeniu", "romstrøm", "flux de la pièce", "oda akışı", "flusso della stanza", "prúdenie miestnosti", "průtok mistnosti")
+MAKE_WORD_TRANSLATION(roomflow, "roomflow", "Raum Fluss", "kamer doorstroming", "Rumsflöde", "przepływ w pomieszczeniu", "romstrøm", "flux de la pièce", "oda akışı", "flusso della stanza", "prúdenie miestnosti", "průtok mistnosti")
 MAKE_WORD_TRANSLATION(roomload, "roomload", "Raum Bedarf", "kamer behoefte", "Rumsbehov", "zapotrzebowanie pomieszczenia", "rombelastning", "charge de la pièce", "oda yükü", "carico della stanza", "izbová zaťaž", "zatížení místnosti")
 MAKE_WORD_TRANSLATION(summer, "summer", "Sommer", "zomer", "Sommar", "lato", "sommer", "été", "yaz", "estate", "leto", "léto")
 MAKE_WORD_TRANSLATION(winter, "winter", "Winter", "winter", "Vinter", "zima", "vinter", "hiver", "kış", "inverno", "zima", "zima")
@@ -367,7 +367,7 @@ MAKE_WORD_TRANSLATION(bookshelf, "mdi:bookshelf", "mdi:bookshelf")
 // MQTT Discovery - this is special device entity for 'climate'
 MAKE_TRANSLATION(haclimate, "haclimate", "mqtt discovery current room temperature", "Discovery aktuelle Raumtemperatur", "Discovery huidige kamertemperatuur", "MQTT Discovery för aktuell rumstemperatur", "termostat w HA", "HA Avlest temp", "découverte mqtt température actuelle", "Güncel osa sıcaklığı", "verifica temperatura ambiente attuale", "mqtt discovery aktuálna teplota v miestnosti", "mqtt discovery aktuální pokojová teplota")

-// Entity translations: tag, mqtt, en, de, nl, sv, pl, no, fr, tr, it, sk, cz
+// Entity translations: tag, mqtt, en, de, nl, sv, pl, no, fr, tr, it, sk, cs
 // Boiler
 MAKE_TRANSLATION(chimneysweeper, "chimneysweeper", "chimney sweeper", "Schornsteinfeger", "schoorsteenveger", "Sotare", "tryb kominiarza", "feier", "ramoneur", "baca temizleyici", "spazzacamino", "kominár", "kominík")
 MAKE_TRANSLATION(reset, "reset", "reset", "Reset", "Reset", "Återställ", "kasowanie komunikatu", "nullstill", "reset", "Sıfırla", "Reset", "reset", "reset")
@@ -826,8 +826,8 @@ MAKE_TRANSLATION(vacations7, "vacations7", "vacation dates 7", "Urlaubstage 7",
 MAKE_TRANSLATION(vacations8, "vacations8", "vacation dates 8", "Urlaubstage 8", "Vakantiedagen 8", "Semesterdatum 8", "urlop 8", "feriedager 8", "dates vacances 8", "izin günleri 8", "date vacanze 8", "termíny dovolenky 8", "data prázdnin 8")
 MAKE_TRANSLATION(absent, "absent", "absent", "Abwesend", "", "Frånvarande", "", "", "", "", "", "chýbajúci", "chybějící") 
 MAKE_TRANSLATION(redthreshold, "redthreshold", "reduction threshold", "Absenkschwelle", "", "Tröskel för sänkning", "", "", "", "", "", "zníženie tresholdu", "práh snížení") 
-MAKE_TRANSLATION(solarinfl, "solarinfl", "solar influence", "Solareinfluß", "", "", "", "", "", "", "", "slnečný vplyv", "sluneční vliv") 
-MAKE_TRANSLATION(currsolarinfl, "currsolarinfl", "current solar influence", "akt. Solareinfluß", "", "", "", "", "", "", "", "aktuálny slnečný vplyv", "aktuální sluneční vliv") 
+MAKE_TRANSLATION(solarinfl, "solarinfl", "solar influence", "Solareinfluss", "", "", "", "", "", "", "", "slnečný vplyv", "sluneční vliv") 
+MAKE_TRANSLATION(currsolarinfl, "currsolarinfl", "current solar influence", "akt. Solareinfluss", "", "", "", "", "", "", "", "aktuálny slnečný vplyv", "aktuální sluneční vliv") 
 MAKE_TRANSLATION(hpmode, "hpmode", "HP Mode", "WP-Modus", "Modus warmtepomp", "Värmepumpsläge", "tryb pracy pompy ciepła", "", "", "yüksek güç modu", "Modalità Termopompa", "Režim TČ", "režim tepelného čerpadla") 
 MAKE_TRANSLATION(dewoffset, "dewoffset", "dew point offset", "Taupunktdifferenz", "Offset dauwpunt", "Daggpunktsförskjutning", "przesunięcie punktu rosy", "", "", "çiğ noktası göreli", "differenza del punto di rugiada", "posun rosného bodu", "offset rosného bodu") 
 MAKE_TRANSLATION(roomtempdiff, "roomtempdiff", "room temp difference", "Raumtemperaturdifferenz", "Verschiltemperatuur kamertemp", "Rumstemperaturskillnad", "różnica temp. pomieszczenia", "", "", "oda sıcaklığı farkı", "differenza temperatura ambiente", "rozdiel izbovej teploty", "rozdíl teploty místnosti") 
@@ -300,6 +300,14 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(heatingPID), 74, 1), // heatingpid
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(preheating), 75, 1), // preheating
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(vacations), 76, 13), // vacations
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(hpoperatingmode), 89, 1), // hpoperatingmode
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(summertemp), 90, 1), // summertemp
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(instantstart), 91, 1), // instantstart
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(coolstart), 92, 1), // coolstart
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(heatondelay), 93, 1), // heatondelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(heatoffdelay), 94, 1), // heatoffdelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(coolondelay), 95, 1), // coolondelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_DEVICE_DATA, FL_(cooloffdelay), 96, 1), // cooloffdelay
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(selRoomTemp), 0, 1), // seltemp
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(roomTemp), 1, 1), // currtemp
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(haclimate), 2, 1), // haclimate
@@ -349,12 +357,12 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(remotehum), 46, 1), // remotehum
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(heatondelay), 47, 1), // heatondelay
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(heatoffdelay), 48, 1), // heatoffdelay
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(instantstart), 49, 1), // instantstart
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boost), 50, 1), // boost
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boosttime), 51, 1), // boosttime
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(coolondelay), 49, 1), // coolondelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(cooloffdelay), 50, 1), // cooloffdelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(instantstart), 51, 1), // instantstart
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(coolstart), 52, 1), // coolstart
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(coolondelay), 53, 1), // coolondelay
-    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(cooloffdelay), 54, 1), // cooloffdelay
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boost), 53, 1), // boost
+    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(boosttime), 54, 1), // boosttime
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(switchProgMode), 55, 1), // switchprogmode
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(redthreshold), 56, 1), // redthreshold
    REGISTER_MAPPING(dt::THERMOSTAT, TAG_TYPE_HC, FL_(solarinfl), 57, 1), // solarinfl
@@ -629,20 +637,6 @@ const std::initializer_list<Modbus::EntityModbusInfo> Modbus::modbus_register_ma
    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwDiffTemp), 13, 1), // difftemp
    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwRedTemp), 14, 1), // redtemp
    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwRequiredTemp), 15, 1), // requiredtemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwStorageTemp1), 16, 1), // storagetemp1
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwColdTemp), 17, 1), // coldtemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwTemp5), 18, 1), // temp5
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(retTemp), 19, 1), // rettemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwHotTemp), 20, 1), // hottemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwDailyTemp), 21, 1), // dailytemp
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwCircTc), 22, 1), // circtc
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwKeepWarm), 23, 1), // keepwarm
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwStatus2), 24, 1), // status2
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwPumpMod), 25, 1), // pumpmod
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(wwFlow), 26, 1), // flow
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(valveReturn), 27, 1), // valvereturn
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(deltaTRet), 28, 1), // deltatret
-    REGISTER_MAPPING(dt::WATER, TAG_TYPE_DHW, FL_(errorDisp), 29, 1), // errordisp
 };

 } // namespace emsesp
@@ -0,0 +1,166 @@
+/*
+ * EMS-ESP - https://github.com/emsesp/EMS-ESP
+ * Copyright 2020-2025  emsesp.org
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rgb_led.h"
+
+#ifndef EMSESP_STANDALONE
+#include <esp32-hal-rmt.h>
+#endif
+
+namespace emsesp {
+
+namespace rgb_led {
+
+#ifndef EMSESP_STANDALONE
+
+namespace {
+
+// durations in 100 ns ticks
+constexpr uint16_t T0H = 3; // 300 ns
+constexpr uint16_t T0L = 9; // 900 ns
+constexpr uint16_t T1H = 8; // 800 ns
+constexpr uint16_t T1L = 6; // 600 ns
+
+// rmt_data_t.val layout: duration0:15, level0:1, duration1:15, level1:1 (high then low)
+constexpr uint32_t SYMBOL_0 = T0H | (1UL << 15) | (static_cast<uint32_t>(T0L) << 16);
+constexpr uint32_t SYMBOL_1 = T1H | (1UL << 15) | (static_cast<uint32_t>(T1L) << 16);
+
+constexpr uint32_t RESET_US = 300;
+constexpr uint8_t  NO_PIN   = 0xFF;
+constexpr uint8_t  MAX_PINS = 2; // status LED + an RGB analog sensor; the ESP32-C3 only has 2 RMT TX channels
+
+#if ESP_ARDUINO_VERSION_MAJOR < 3
+constexpr float TICK_NS = 100.0f; // 1 tick = 100 ns
+#else
+constexpr uint32_t RMT_FREQ_HZ = 10000000; // 10 MHz, 1 tick = 100 ns
+#endif
+
+struct Channel {
+    uint8_t  pin        = NO_PIN;
+    uint32_t last_tx_us = 0;
+#if ESP_ARDUINO_VERSION_MAJOR < 3
+    rmt_obj_t * rmt = nullptr; // Core 2 addresses the channel by handle, Core 3 by pin
+#endif
+};
+
+Channel channels[MAX_PINS];
+
+void release(Channel & ch) {
+    if (ch.pin == NO_PIN) {
+        return;
+    }
+#if ESP_ARDUINO_VERSION_MAJOR < 3
+    rmtDeinit(ch.rmt);
+    ch.rmt = nullptr;
+#else
+    rmtDeinit(ch.pin);
+#endif
+    ch.pin = NO_PIN;
+}
+
+Channel * init(uint8_t pin) {
+    Channel * free_slot = nullptr;
+    for (auto & ch : channels) {
+        if (ch.pin == pin) {
+            return &ch;
+        }
+        if (!free_slot && ch.pin == NO_PIN) {
+            free_slot = &ch;
+        }
+    }
+
+    if (!free_slot) {
+        // all slots in use: release the least recently written one
+        const uint32_t now = micros();
+        free_slot          = &channels[0];
+        for (auto & ch : channels) {
+            if (now - ch.last_tx_us > now - free_slot->last_tx_us) {
+                free_slot = &ch;
+            }
+        }
+        release(*free_slot);
+    }
+
+#if ESP_ARDUINO_VERSION_MAJOR < 3
+    rmt_obj_t * rmt = rmtInit(pin, RMT_TX_MODE, RMT_MEM_64);
+    if (!rmt) {
+        return nullptr;
+    }
+    rmtSetTick(rmt, TICK_NS);
+    free_slot->rmt = rmt;
+#else
+    if (!rmtInit(pin, RMT_TX_MODE, RMT_MEM_NUM_BLOCKS_1, RMT_FREQ_HZ)) {
+        return nullptr;
+    }
+#endif
+
+    free_slot->pin        = pin;
+    free_slot->last_tx_us = micros() - RESET_US; // no wait on first write
+    return free_slot;
+}
+
+} // namespace
+
+void write(uint8_t pin, uint8_t red, uint8_t green, uint8_t blue, Order order) {
+    Channel * ch = init(pin);
+    if (!ch) {
+        return;
+    }
+
+    // enforce the latch/reset gap since the previous frame (V6 needs > 280 us)
+    const uint32_t elapsed = micros() - ch->last_tx_us;
+    if (elapsed < RESET_US) {
+        delayMicroseconds(RESET_US - elapsed);
+    }
+
+    const uint8_t bytes[3] = {order == Order::GRB ? green : red, order == Order::GRB ? red : green, blue};
+
+    rmt_data_t frame[24];
+    for (uint8_t i = 0; i < 24; i++) {
+        frame[i].val = (bytes[i >> 3] & (0x80 >> (i & 7))) ? SYMBOL_1 : SYMBOL_0;
+    }
+
+#if ESP_ARDUINO_VERSION_MAJOR < 3
+    rmtWriteBlocking(ch->rmt, frame, 24);
+#else
+    rmtWrite(pin, frame, 24, RMT_WAIT_FOR_EVER);
+#endif
+    ch->last_tx_us = micros();
+}
+
+void end(uint8_t pin) {
+    for (auto & ch : channels) {
+        if (ch.pin == pin) {
+            release(ch);
+        }
+    }
+}
+
+#else
+
+void write(uint8_t, uint8_t, uint8_t, uint8_t, Order) {
+}
+
+void end(uint8_t) {
+}
+
+#endif
+
+} // namespace rgb_led
+
+} // namespace emsesp
@@ -0,0 +1,53 @@
+/*
+ * EMS-ESP - https://github.com/emsesp/EMS-ESP
+ * Copyright 2020-2025  emsesp.org
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef EMSESP_RGB_LED_H_
+#define EMSESP_RGB_LED_H_
+
+#include <Arduino.h>
+
+namespace emsesp {
+
+// WS2812B driver replacing arduino-esp32's rgbLedWrite()/neopixelWrite(), which hard-code
+// T0H = 400 ns, T1L = 400 ns and have no reset gap. The WS2812B-2020-V6 needs T0H 220-380 ns,
+// T1L 580-1000 ns and a reset > 280 us, otherwise it misreads 0-bits as 1-bits (washed-out white).
+// Timings used (10 MHz RMT clock, 1 tick = 100 ns) fit both the original WS2812B and the V6:
+//
+//            sent     old WS2812B    WS2812B-2020-V6
+//   T0H     300 ns    250-550 ns     220-380 ns
+//   T0L     900 ns    700-1000 ns    580-1000 ns
+//   T1H     800 ns    650-950 ns     580-1000 ns
+//   T1L     600 ns    300-600 ns     580-1000 ns
+//   Reset  >300 us    >50 us         >280 us
+//
+// Supports both Arduino Core 2.x (handle based RMT API) and Core 3.x (pin based RMT API).
+// Do not mix with rgbLedWrite()/neopixelWrite() on the same pin, as both claim the pin's RMT channel.
+namespace rgb_led {
+
+enum class Order : uint8_t { GRB, RGB }; // WS2812B is GRB
+
+// Blocks ~30 us for the transmit, plus up to the reset gap if called again right after the previous update.
+// Returns void so it can be used as a drop-in for neopixelWrite()/rgbLedWrite(), e.g. in a ternary with digitalWrite()
+void write(uint8_t pin, uint8_t red, uint8_t green, uint8_t blue, Order order = Order::GRB);
+void end(uint8_t pin); // release the pin's RMT channel, e.g. before reusing the pin for something else
+
+} // namespace rgb_led
+
+} // namespace emsesp
+
+#endif
@@ -377,19 +377,23 @@ void Roomctrl::temperature(uint8_t addr, uint8_t dst, uint8_t hc) {

 // send telegram 0x047B only for RC100H
 void Roomctrl::humidity(uint8_t addr, uint8_t dst, uint8_t hc) {
+    int16_t dew  = Helpers::calc_dew(remotetemp_[hc], remotehum_[hc]);
+    int8_t  dew8 = EMS_VALUE_INT8_NOTSET;
+    if (dew != EMS_VALUE_INT16_NOTSET) {
+        dew8 = static_cast<int8_t>((dew >= 0 ? dew + 5 : dew - 5) / 10);
+    }
    uint8_t data[11];
-    data[0]      = addr | EMSbus::ems_mask();
-    data[1]      = dst & 0x7F;
-    uint16_t dew = calc_dew(remotetemp_[hc], remotehum_[hc]);
-    data[2]      = 0xFF;
-    data[3]      = 0;
-    data[4]      = 3;
-    data[5]      = 0x7B + hc;
-    data[6]      = dew == EMS_VALUE_INT16_NOTSET ? EMS_VALUE_INT8_NOTSET : (uint8_t)((dew + 5) / 10);
-    data[7]      = remotehum_[hc];
-    data[8]      = (uint8_t)(dew << 8);
-    data[9]      = (uint8_t)(dew & 0xFF);
-    data[10]     = EMSbus::calculate_crc(data, 10); // append CRC
+    data[0]  = addr | EMSbus::ems_mask();
+    data[1]  = dst & 0x7F;
+    data[2]  = 0xFF;
+    data[3]  = 0;
+    data[4]  = 3;
+    data[5]  = 0x7B + hc;
+    data[6]  = static_cast<uint8_t>(dew8);
+    data[7]  = remotehum_[hc];
+    data[8]  = static_cast<uint8_t>(dew >> 8);
+    data[9]  = static_cast<uint8_t>(dew & 0x00FF);
+    data[10] = EMSbus::calculate_crc(data, 10); // append CRC
    EMSuart::transmit(data, 11);
 }

@@ -436,17 +440,4 @@ void Roomctrl::replyF7(uint8_t addr, uint8_t dst, uint8_t offset, uint8_t typehh
    EMSuart::transmit(data, 10);
 }

-int16_t Roomctrl::calc_dew(int16_t temp, uint8_t humi) {
-    if (humi == EMS_VALUE_UINT8_NOTSET || temp == EMS_VALUE_INT16_NOTSET) {
-        return EMS_VALUE_INT16_NOTSET;
-    }
-    const float k2 = 17.62;
-    const float k3 = 243.12;
-    const float t  = (float)temp / 10;
-    const float h  = (float)humi / 100;
-    int16_t     dt = (10 * k3 * (((k2 * t) / (k3 + t)) + log(h)) / (((k2 * k3) / (k3 + t)) - log(h)));
-    return dt;
-}
-
-
 } // namespace emsesp
@@ -50,7 +50,6 @@ class Roomctrl {
    static void    nack_write();
    static void    ack_write();
    static void    replyF7(uint8_t addr, uint8_t dst, uint8_t offset, uint8_t typehh, uint8_t typeh, uint8_t typel, uint8_t hc);
-    static int16_t calc_dew(int16_t temp, uint8_t hum);

    static bool     switch_off_[HCS];
    static uint32_t send_time_[HCS];
@@ -39,17 +39,8 @@ std::deque<Token> exprToTokens(const std::string & expr) {
                i += (*p == '{') ? 1 : (*p == '}') ? -1 : 0;
                ++p;
            }
-            if (*p) {
-                ++p;
-            }
-            // Use string_view to avoid unnecessary string copies
-            std::string_view s(b, p - b);
-            auto             n = s.find("\"\"");
-            while (n != std::string_view::npos) {
-                s.remove_prefix(n + 2);
-                n = s.find("\"\"");
-            }
-            tokens.emplace_back(Token::Type::String, std::string(s), -3);
+            const auto s = std::string(b, p);
+            tokens.emplace_back(Token::Type::String, s, -3);
            if (*p == '\0') {
                --p;
            }
@@ -333,7 +324,10 @@ std::deque<Token> shuntingYard(const std::deque<Token> & tokens) {

 // check if string is a number
 bool isnum(const std::string & s) {
-    if (!s.empty() && (s.find_first_not_of("0123456789.") == std::string::npos || (s[0] == '-' && s.find_first_not_of("0123456789.", 1) == std::string::npos))) {
+    if (s.empty() || s.find_first_of("0123456789") == std::string::npos) {
+        return false;
+    }
+    if (s.find_first_not_of("0123456789.") == std::string::npos || (s[0] == '-' && s.find_first_not_of("0123456789.", 1) == std::string::npos)) {
        return true;
    }
    return false;
@@ -636,6 +630,10 @@ std::string calculate(const std::string & expr) {
                stack.push_back(lhs + rhs);
                break;
            }
+            if (!isnum(rhs) || !isnum(lhs)) {
+                stack.push_back(lhs + token.str + rhs);
+                break;
+            }
            auto lhd = std::stod(lhs);
            auto rhd = std::stod(rhs);
            switch (token.str[0]) {
@@ -700,8 +698,7 @@ std::string compute(const std::string & expr) {
        std::string  cmd = expr_new.substr(f, e - f).c_str();
        JsonDocument doc;
        if (DeserializationError::Ok == deserializeJson(doc, cmd)) {
-            HTTPClient * http = new HTTPClient;
-            std::string  url, header_s, value_s, method_s, key_s, keys_s;
+            std::string url, header_s, value_s, method_s, key_s, keys_s;
            // search keys lower case
            for (JsonPair p : doc.as<JsonObject>()) {
                if (Helpers::toLower(p.key().c_str()) == "url") {
@@ -720,56 +717,63 @@ std::string compute(const std::string & expr) {
                    keys_s = p.key().c_str();
                }
            }
-            if (http->begin(url.c_str())) {
-                int httpResult = 0;
-                for (JsonPair p : doc[header_s].as<JsonObject>()) {
-                    http->addHeader(p.key().c_str(), p.value().as<std::string>().c_str());
-                }
-                std::string value  = doc[value_s] | "";
-                std::string method = doc[method_s] | "get";
-
-                // if there is data, force a POST
-                if (value.length() || Helpers::toLower(method) == "post") {
-                    if (value.find_first_of('{') != std::string::npos) {
-                        http->addHeader(asyncsrv::T_Content_Type, asyncsrv::T_application_json, false); // auto-set to JSON
+            if (url.substr(0, 4) == "http") { // match http and https
+                HTTPClient * http = new HTTPClient;
+#ifndef EMSESP_STANDALONE
+                http->setConnectTimeout(10000);
+                http->setTimeout(10000);
+#endif
+                if (http->begin(url.c_str())) {
+                    int httpResult = 0;
+                    for (JsonPair p : doc[header_s].as<JsonObject>()) {
+                        http->addHeader(p.key().c_str(), p.value().as<std::string>().c_str());
                    }
-                    httpResult = http->POST(value.c_str());
-                } else {
-                    httpResult = http->GET(); // normal GET
-                }
+                    std::string value  = doc[value_s] | "";
+                    std::string method = doc[method_s] | "get";

-                if (httpResult > 0) {
-                    std::string  result = http->getString().c_str();
-                    std::string  key    = doc[key_s] | "";
-                    JsonDocument keys_doc; // JsonDocument to hold "keys" after doc is parsed with HTTP body
-                    if (doc[keys_s].is<JsonArray>()) {
-                        keys_doc.set(doc[keys_s].as<JsonArray>());
+                    // if there is data, force a POST
+                    if (value.length() || Helpers::toLower(method) == "post") {
+                        if (value.find_first_of('{') != std::string::npos) {
+                            http->addHeader(asyncsrv::T_Content_Type, asyncsrv::T_application_json, false); // auto-set to JSON
+                        }
+                        httpResult = http->POST(value.c_str());
+                    } else {
+                        httpResult = http->GET(); // normal GET
                    }
-                    JsonArray keys = keys_doc.as<JsonArray>();

-                    if (key.length() || !keys.isNull()) {
-                        doc.clear();
-                        if (DeserializationError::Ok == deserializeJson(doc, result)) {
-                            if (key.length()) {
-                                result = doc[key.c_str()].as<std::string>();
-                            } else {
-                                JsonVariant json = doc.as<JsonVariant>();
-                                for (JsonVariant keys_key : keys) {
-                                    if (keys_key.is<std::string>() && json.is<JsonObject>()) {
-                                        json = json[keys_key.as<std::string>()].as<JsonVariant>();
-                                    } else if (keys_key.is<int>() && json.is<JsonArray>()) {
-                                        json = json[keys_key.as<int>()].as<JsonVariant>();
-                                    } else {
-                                        break; // type mismatch
+                    if (httpResult > 0) {
+                        std::string  result = http->getString().c_str();
+                        std::string  key    = doc[key_s] | "";
+                        JsonDocument keys_doc; // JsonDocument to hold "keys" after doc is parsed with HTTP body
+                        if (doc[keys_s].is<JsonArray>()) {
+                            keys_doc.set(doc[keys_s].as<JsonArray>());
+                        }
+                        JsonArray keys = keys_doc.as<JsonArray>();
+
+                        if (key.length() || !keys.isNull()) {
+                            doc.clear();
+                            if (DeserializationError::Ok == deserializeJson(doc, result)) {
+                                if (key.length()) {
+                                    result = doc[key.c_str()].as<std::string>();
+                                } else {
+                                    JsonVariant json = doc.as<JsonVariant>();
+                                    for (JsonVariant keys_key : keys) {
+                                        if (keys_key.is<std::string>() && json.is<JsonObject>()) {
+                                            json = json[keys_key.as<std::string>()].as<JsonVariant>();
+                                        } else if (keys_key.is<int>() && json.is<JsonArray>()) {
+                                            json = json[keys_key.as<int>()].as<JsonVariant>();
+                                        } else {
+                                            break; // type mismatch
+                                        }
                                    }
+                                    result = json.as<std::string>();
                                }
-                                result = json.as<std::string>();
                            }
                        }
+                        expr_new.replace(f, e - f, result.c_str());
                    }
-                    expr_new.replace(f, e - f, result.c_str());
+                    http->end();
                }
-                http->end();
                delete http;
            }
        }
@@ -821,4 +825,4 @@ std::string compute(const std::string & expr) {
    return calculate(expr_new);
 }

-} // namespace emsesp
+} // namespace emsesp
@@ -30,7 +30,7 @@

 #include <HTTPClient.h>
 #include <map>
-
+#include "shuntingYard.h" // for compute() used by the message
 #include "EMSESP_Version.h"

 #if defined(EMSESP_TEST)
@@ -61,7 +61,7 @@ const char * const languages[] = {EMSESP_LOCALE_EN,
                                  EMSESP_LOCALE_TR,
                                  EMSESP_LOCALE_IT,
                                  EMSESP_LOCALE_SK,
-                                  EMSESP_LOCALE_CZ};
+                                  EMSESP_LOCALE_CS};
 #endif

 static constexpr uint8_t NUM_LANGUAGES = sizeof(languages) / sizeof(const char *);
@@ -222,22 +222,10 @@ bool System::command_message(const char * value, const int8_t id, JsonObject out
        LOG_WARNING("Message is empty");
        return false; // must have a string value
    }
-
-    EMSESP::webSchedulerService.computed_value.clear();
-    EMSESP::webSchedulerService.raw_value = value;
-    for (uint16_t wait = 0; wait < 2000 && !EMSESP::webSchedulerService.raw_value.empty(); wait++) {
-        delay(1);
-    }
-
-    if (EMSESP::webSchedulerService.computed_value.empty()) {
-        LOG_WARNING("Message result is empty");
-        return false;
-    }
-
-    LOG_INFO("Message: %s", EMSESP::webSchedulerService.computed_value.c_str());  // send to log
-    Mqtt::queue_publish(F_(message), EMSESP::webSchedulerService.computed_value); // send to MQTT if enabled
-    output["api_data"] = EMSESP::webSchedulerService.computed_value;              // send to API
-
+    std::string computed_value = compute(value);
+    LOG_INFO("Message: %s", computed_value.c_str());  // send to log
+    Mqtt::queue_publish(F_(message), computed_value); // send to MQTT if enabled
+    output["api_data"] = computed_value;              // send to API
    return true;
 }

@@ -676,7 +664,7 @@ void System::led_flash() {

        if (led_flash_type_) {
            uint8_t intensity = led_flash_state_ ? RGB_LED_BRIGHTNESS : 0;
-            EMSESP_RGB_WRITE(led_flash_gpio_, intensity, intensity, 0); // RGB LED - Yellow
+            rgb_led::write(led_flash_gpio_, intensity, intensity, 0); // RGB LED - Yellow
        } else {
            digitalWrite(led_flash_gpio_, led_flash_state_ ? LED_ON : !LED_ON); // Standard LED
        }
@@ -685,7 +673,7 @@ void System::led_flash() {
    // after duration, turn off the LED
    if (current_time - led_flash_start_time_ >= led_flash_duration_) {
        if (led_flash_type_) {
-            EMSESP_RGB_WRITE(led_flash_gpio_, 0, 0, 0);
+            rgb_led::write(led_flash_gpio_, 0, 0, 0);
        } else {
            digitalWrite(led_flash_gpio_, !LED_ON);
        }
@@ -744,12 +732,11 @@ void System::button_init() {
 // set the LED to on or off when in normal operating mode
 void System::led_init() {
    // disabled old led port before setting new one
-    led_type_ ? EMSESP_RGB_WRITE(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON);
+    led_type_ ? rgb_led::write(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON);

    if ((led_gpio_)) { // 0 means disabled
        if (led_type_) {
-            // rgb LED WS2812B, use Neopixel
-            EMSESP_RGB_WRITE(led_gpio_, 0, 0, 0);
+            rgb_led::write(led_gpio_, 0, 0, 0); // rgb LED WS2812B
        } else {
            pinMode(led_gpio_, OUTPUT);
            digitalWrite(led_gpio_, !LED_ON); // start with LED off
@@ -966,6 +953,10 @@ void System::network_init() {
 #else
    eth_present_ = ETH.begin(type, phy_addr, mdc, mdio, power, clock_mode);
 #endif
+    // show error if Eth is present but fails to start, so it can be automatically detected by the new installers
+    if (!eth_present_) {
+        LOG_ERROR("Failed to start Ethernet");
+    }
 #endif
 }

@@ -1016,13 +1007,13 @@ void System::system_check() {
                // everything is healthy, show LED permanently on or off depending on setting
                // Green on RGB LED, on/off on standard LED
                if (led_gpio_) {
-                    led_type_ ? EMSESP_RGB_WRITE(led_gpio_, 0, hide_led_ ? 0 : RGB_LED_BRIGHTNESS, 0)
+                    led_type_ ? rgb_led::write(led_gpio_, 0, hide_led_ ? 0 : RGB_LED_BRIGHTNESS, 0)
                              : digitalWrite(led_gpio_, hide_led_ ? !LED_ON : LED_ON); // Green
                }
            } else {
                // turn off LED so we're ready for the warning flashes
                if (led_gpio_) {
-                    led_type_ ? EMSESP_RGB_WRITE(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON);
+                    led_type_ ? rgb_led::write(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON);
                }
            }
        }
@@ -1058,7 +1049,7 @@ void System::led_monitor() {
    if (button_busy_ != myPButton_.button_busy()) {
        button_busy_ = myPButton_.button_busy();
        if (led_type_) {
-            EMSESP_RGB_WRITE(led_gpio_, button_busy_ ? RGB_LED_BRIGHTNESS : 0, button_busy_ ? RGB_LED_BRIGHTNESS : 0, 0); // Yellow
+            rgb_led::write(led_gpio_, button_busy_ ? RGB_LED_BRIGHTNESS : 0, button_busy_ ? RGB_LED_BRIGHTNESS : 0, 0); // Yellow
        } else {
            digitalWrite(led_gpio_, button_busy_ ? LED_ON : !LED_ON);
        }
@@ -1093,7 +1084,7 @@ void System::led_monitor() {
            // reset the whole sequence
            led_long_timer_ = uuid::get_uptime();
            led_flash_step_ = 0;
-            led_type_ ? EMSESP_RGB_WRITE(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON); // LED off
+            led_type_ ? rgb_led::write(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON); // LED off
        } else if (led_flash_step_ % 2) {
            // handle the step events (on odd numbers 3,5,7,etc). see if we need to turn on a LED
            //  1 flash (blue) is the EMS bus is not connected
@@ -1105,16 +1096,16 @@ void System::led_monitor() {
            if (led_type_) {
                if (led_flash_step_ == 3) {
                    if (no_network) {
-                        EMSESP_RGB_WRITE(led_gpio_, RGB_LED_BRIGHTNESS, 0, 0); // red
+                        rgb_led::write(led_gpio_, RGB_LED_BRIGHTNESS, 0, 0); // red
                    } else if (no_bus) {
-                        EMSESP_RGB_WRITE(led_gpio_, 0, 0, RGB_LED_BRIGHTNESS); // blue
+                        rgb_led::write(led_gpio_, 0, 0, RGB_LED_BRIGHTNESS); // blue
                    }
                }
                if (led_flash_step_ == 5 && no_network) {
-                    EMSESP_RGB_WRITE(led_gpio_, RGB_LED_BRIGHTNESS, 0, 0); // red
+                    rgb_led::write(led_gpio_, RGB_LED_BRIGHTNESS, 0, 0); // red
                }
                if ((led_flash_step_ == 7) && no_network && no_bus) {
-                    EMSESP_RGB_WRITE(led_gpio_, 0, 0, RGB_LED_BRIGHTNESS); // blue
+                    rgb_led::write(led_gpio_, 0, 0, RGB_LED_BRIGHTNESS); // blue
                }
            } else {
                if ((led_flash_step_ == 3) && (no_network || no_bus)) {
@@ -1136,7 +1127,7 @@ void System::led_monitor() {
        } else {
            // turn the led off after the flash, on even number count
            if (led_on_) {
-                led_type_ ? EMSESP_RGB_WRITE(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON);
+                led_type_ ? rgb_led::write(led_gpio_, 0, 0, 0) : digitalWrite(led_gpio_, !LED_ON);
                led_on_ = false;
            }
        }
@@ -1964,7 +1955,9 @@ bool System::get_value_info(JsonObject output, const char * cmd) {
        LOG_ERROR("empty system command");
        return false;
    }
-
+    if (!strcmp(cmd, "restart")) { // restart is a command, not an entity
+        return false;
+    }
    // check for hardcoded "info"/"value"
    if (!strcmp(cmd, F_(info)) || !strcmp(cmd, F_(values))) {
        return command_info("", 0, output);
@@ -3034,18 +3027,24 @@ bool System::uploadFirmwareURL(const char * url) {
        return false; // error
    }

+    // the Content-Length from the response header, -1 if the server didn't send one.
    int firmware_size = http.getSize();
+    if (firmware_size <= 0) {
+        LOG_ERROR("Firmware upload failed - unknown size");
+        http.end();
+        return false; // error
+    }

-    // check we have a valid size
-    if (firmware_size < 2097152) { // 2MB or greater is required
-        LOG_ERROR("Firmware upload failed - invalid size");
+    // catch a wrong URL early, before streaming. Smallest shipped image is ~1.9MB
+    if (firmware_size < 1677721) { // 1.6MB
+        LOG_ERROR("Firmware upload failed - too small (%d KB)", firmware_size / 1024);
        http.end();
        return false; // error
    }

    // check we have enough space for the upload in the ota partition
    if (!Update.begin(firmware_size)) {
-        LOG_ERROR("Firmware upload failed - no space");
+        LOG_ERROR("Firmware upload failed - %s", Update.errorString());
        http.end();
        return false; // error
    }
@@ -3062,7 +3061,7 @@ bool System::uploadFirmwareURL(const char * url) {

    // get tcp stream and send it to Updater
    WiFiClient * stream = http.getStreamPtr();
-    if (Update.writeStream(*stream) != firmware_size) {
+    if (Update.writeStream(*stream) != (size_t)firmware_size) {
        LOG_ERROR("Firmware upload failed - size differences");
        http.end();
        EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_ERROR_UPLOAD);
@@ -37,11 +37,8 @@
 #include <uuid/log.h>
 #include <PButton.h>

-#if ESP_ARDUINO_VERSION_MAJOR < 3
-#define EMSESP_RGB_WRITE neopixelWrite
-#else
-#define EMSESP_RGB_WRITE rgbLedWrite
-#endif
+#include "rgb_led.h"
+

 #if CONFIG_IDF_TARGET_ESP32
 // there is no official API available on the original ESP32
@@ -161,9 +161,9 @@ void RxService::add(uint8_t * data, uint8_t length) {
        }
        if (data[0] != EMSuart::last_tx_src()) { // do not count echos as errors
            telegram_error_count_++;
-            LOG_WARNING("Incomplete Rx: %s", Helpers::data_to_hex(data, length).c_str()); // include CRC
+            LOG_WARNING("Incomplete Rx: %s (crc: %02X)", Helpers::data_to_hex(data, length).c_str(), crc); // include CRC
        } else {
-            LOG_TRACE("Incomplete Rx: %s", Helpers::data_to_hex(data, length).c_str()); // include CRC
+            LOG_TRACE("Incomplete Rx: %s (crc: %02X)", Helpers::data_to_hex(data, length).c_str(), crc); // include CRC
        }
        return;
    }
@@ -276,6 +276,7 @@ void TxService::start() {
 // sends a 1 byte poll which is our own deviceID
 void TxService::send_poll() const {
    // LOG_DEBUG("Ack %02X",ems_bus_id() ^ ems_mask());
+    // if (tx_mode() != EMS_TXMODE_OFF && ems_bus_id() != 0x0D) { // use 0x0D for tests without poll-Ack
    if (tx_mode() != EMS_TXMODE_OFF) {
        EMSuart::send_poll(ems_bus_id() ^ ems_mask());
    }
@@ -572,12 +573,11 @@ bool TxService::send_raw(const char * telegram_data) {
        return false;
    }

-    // since the telegram data is a const, make a copy. add 1 to grab the \0 EOS
-    char telegram[strlen(telegram_data) + 1];
-    strlcpy(telegram, telegram_data, sizeof(telegram));
+    // since the telegram data is a const, make a copy
+    char * telegram = strdup(telegram_data);

    uint8_t count = 0;
-    uint8_t data[2 + strlen(telegram) / 3];
+    uint8_t data[256]; // max raw telegram length

    // get values
    char * p = strtok(telegram, " ,"); // delimiter
@@ -585,7 +585,7 @@ bool TxService::send_raw(const char * telegram_data) {
        data[count++] = (uint8_t)strtol(p, 0, 16);
        p             = strtok(nullptr, " ,");
    }
-
+    free(telegram);
    // check valid length
    if (count < 4) {
        return false;
@@ -45,7 +45,8 @@ Connect::Connect(uint8_t device_type, uint8_t device_id, uint8_t product_id, con
        register_telegram_type(0x1230 + i, "Roomparams", false, MAKE_PF_CB(process_roomThermostatParam));         // fetch for active circuits
        register_telegram_type(0x1244 + i, "Roomdata", false, MAKE_PF_CB(process_roomThermostatData));            // broadcasted
    }
-    register_telegram_type(0xDB65, "Roomschedule", true, MAKE_PF_CB(process_roomSchedule));
+    register_telegram_type(0x0B65, "Roomschedule", true, MAKE_PF_CB(process_roomSchedule));
+    register_telegram_type(0xF7, "MenuConfig", false, MAKE_PF_CB(process_roomConfig));
    // 0x2040, broadcast 36 bytes:
    // data: 0E 60 00 DF 0D AF 0A 46 0A 46 02 9A 1C 53 1C 53 12 AD 12 AD 00 00 13 C2
    // data: 1F 37 1F 37 00 00 00 00 18 97 11 27 (offset 24)
@@ -88,11 +89,12 @@ void Connect::process_RCTime(std::shared_ptr<const Telegram> telegram) {
 void Connect::register_device_values_room(std::shared_ptr<Connect::RoomCircuit> room) {
    auto tag = DeviceValueTAG::TAG_SRC1 + room->room();
    register_device_value(tag, &room->temp_, DeviceValueType::INT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(roomTemp), DeviceValueUOM::DEGREES);
-    register_device_value(tag, &room->humidity_, DeviceValueType::INT8, FL_(airHumidity), DeviceValueUOM::PERCENT);
+    register_device_value(tag, &room->humidity_, DeviceValueType::UINT8, FL_(airHumidity), DeviceValueUOM::PERCENT);
    register_device_value(tag, &room->dewtemp_, DeviceValueType::INT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(dewTemperature), DeviceValueUOM::DEGREES);
    register_device_value(
        tag, &room->seltemp_, DeviceValueType::UINT8, DeviceValueNumOp::DV_NUMOP_DIV2, FL_(selRoomTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_seltemp), 5, 30);
    register_device_value(tag, &room->mode_, DeviceValueType::ENUM, FL_(enum_mode2), FL_(mode), DeviceValueUOM::NONE, MAKE_CF_CB(set_mode));
+    // register_device_value(tag, &room->coolmode_, DeviceValueType::BOOL, FL_(coolingOn), DeviceValueUOM::NONE, MAKE_CF_CB(set_coolmode));
    register_device_value(tag, &room->name_, DeviceValueType::STRING, FL_(name), DeviceValueUOM::NONE, MAKE_CF_CB(set_name));
    register_device_value(tag, &room->childlock_, DeviceValueType::BOOL, FL_(childlock), DeviceValueUOM::NONE, MAKE_CF_CB(set_childlock));
    register_device_value(tag, &room->icon_, DeviceValueType::ENUM, FL_(enum_icons), FL_(icon), DeviceValueUOM::NONE, MAKE_CF_CB(set_icon));
@@ -133,16 +135,8 @@ void Connect::process_roomThermostat(std::shared_ptr<const Telegram> telegram) {
    if (!Mqtt::ha_enabled() || (Helpers::hasValue(rc->mode_) && Helpers::hasValue(rc->icon_))) {
        has_update(telegram, rc->seltemp_, 3);
    }
-
    // calculate dew temperature
-    if (rc->humidity_ >= 0 && rc->humidity_ <= 100) {
-        const float k2 = 17.62;
-        const float k3 = 243.12;
-        const float t  = (float)rc->temp_ / 10;
-        const float h  = (float)rc->humidity_ / 100;
-        int16_t     dt = (10 * k3 * (((k2 * t) / (k3 + t)) + log(h)) / (((k2 * k3) / (k3 + t)) - log(h)));
-        has_update(rc->dewtemp_, dt);
-    }
+    has_update(rc->dewtemp_, Helpers::calc_dew(rc->temp_, rc->humidity_));
 }

 // gateway(0x48) W gateway(0x50), ?(0x0B42), data: 01 // icon in offset 0
@@ -168,11 +162,33 @@ void Connect::process_roomThermostatSettings(std::shared_ptr<const Telegram> tel
    if (rc == nullptr) {
        return;
    }
-    has_enumupdate(telegram, rc->mode_, 0, {3, 1, 0}); // modes off, manual auto
+    // has_enumupdate(telegram, rc->mode_, 0, {3, 1, 0}); // modes off, manual auto
    // has_update(telegram, rc->mode_, 0); // modes: auto, heat, cool, off
    // has_update(telegram, rc->tempautotemp_, 1); // FF means off
    // has_update(telegram, rc->manualtemp_, 3);
+    // has_update(telegram, rc->coolmode_, 4); // 01-cooling, 00-heating
+    // has_update(telegram, rc->coolautotemp_, 5);
+    // has_update(telegram, rc->cooltemp_, 6);
    has_update(telegram, rc->childlock_, 7);
+    uint8_t mh = 0xFF;
+    uint8_t mc = 0xFF;
+    telegram->read_value(mh, 0);
+    telegram->read_value(mc, 4);
+    if (mc == 3) {
+        rc->coolmode_ = 1;
+        rc->mode_     = 0;
+    } else if (mh == 3) {
+        rc->coolmode_ = 0;
+        rc->mode_     = 0;
+    } else if (mc == 1) {
+        rc->coolmode_ = 1;
+        rc->mode_     = 1;
+    } else if (mh == 1) {
+        rc->coolmode_ = 0;
+        rc->mode_     = 1;
+    } else {
+        rc->mode_ = 2;
+    }
 }

 // unknown telegrams, needs fetch
@@ -203,6 +219,53 @@ void Connect::process_roomSchedule(std::shared_ptr<const Telegram> telegram) {
    toggle_fetch(telegram->type_id, false); // fetch only once if all is initialized
 }

+void Connect::process_roomConfig(std::shared_ptr<const Telegram> telegram) {
+    if (telegram->offset == 0 && telegram->message_length > 3) {
+        uint16_t t = 0;
+        telegram->read_value(t, 1);
+        if (t >= 0x0AB5 && t <= 0x0AB5 + 15) {
+            auto rc = room_circuit(t - 0x0AB5);
+            if (rc == nullptr) {
+                return;
+            }
+            uint8_t bits = telegram->message_data[3];
+            if (rc->mode_ == 2) {
+                if (bits & 0x02) {
+                    rc->coolmode_ = 0;
+                } else if (bits & 0x20) {
+                    rc->coolmode_ = 1;
+                }
+            }
+            /*
+            switch (bits & 0x6A) {
+            case 0: // cooling off
+                rc->mode_     = 0;
+                rc->coolmode_ = 1;
+                break;
+            case 0x40: // manual cooling or heating off
+                rc->mode_     = 1;
+                rc->coolmode_ = 1;
+                break;
+            case 0x20: // auto cooling
+                rc->mode_     = 2;
+                rc->coolmode_ = 1;
+                break;
+            case 0x48: // manual heating
+            case 0x08: // manual heating
+                rc->mode_     = 1;
+                rc->coolmode_ = 0;
+                break;
+            case 0x42: // auto heating
+            case 0x02: // auto heating
+                rc->mode_     = 2;
+                rc->coolmode_ = 0;
+                break;
+            }
+            */
+        }
+    }
+}
+
 // Settings:

 bool Connect::set_mode(const char * value, const int8_t id) {
@@ -216,7 +279,7 @@ bool Connect::set_mode(const char * value, const int8_t id) {
            return false;
        }
    }
-    write_command(0xBB5 + rc->room(), 0, v); // no validate, mode change is broadcasted
+    write_command(0xBB5 + rc->room(), rc->coolmode_ == 1 ? 4 : 0, v); // no validate, mode change is broadcasted
    return true;
 }

@@ -226,10 +289,13 @@ bool Connect::set_seltemp(const char * value, const int8_t id) {
        return false;
    }
    float v;
-    if (Helpers::value2float(value, v)) {
+    if (Helpers::value2temperature(value, v)) {
        // depends on mode, auto (2 for enum_mode2, 0 for enum_mode8) set in offset 1
-        write_command(0xBB5 + rc->room(), rc->mode_ == 2 ? 1 : 3, v == -1 ? 0xFF : uint8_t(v * 2));
-        // write_command(0xBB5 + rc->room(), rc->mode_ == 0 ? 1 : 3, v == -1 ? 0xFF : uint8_t(v * 2));
+        if (rc->coolmode_ == 1) {
+            write_command(0xBB5 + rc->room(), rc->mode_ == 2 ? 5 : 6, v == -1 ? 0xFF : uint8_t(v * 2));
+        } else {
+            write_command(0xBB5 + rc->room(), rc->mode_ == 2 ? 1 : 3, v == -1 ? 0xFF : uint8_t(v * 2));
+        }
        return true;
    }
    return false;
@@ -257,6 +323,19 @@ bool Connect::set_name(const char * value, const int8_t id) {
    return true;
 }

+bool Connect::set_coolmode(const char * value, const int8_t id) {
+    auto rc = room_circuit(id - DeviceValueTAG::TAG_SRC1);
+    if (rc == nullptr) {
+        return false;
+    }
+    bool b;
+    if (Helpers::value2bool(value, b)) {
+        write_command(0xBB5 + rc->room(), 4, b ? 1 : 0, 0xBB5 + rc->room());
+        return true;
+    }
+    return false;
+}
+
 bool Connect::set_childlock(const char * value, const int8_t id) {
    auto rc = room_circuit(id - DeviceValueTAG::TAG_SRC1);
    if (rc == nullptr) {
@@ -34,15 +34,18 @@ class Connect : public EMSdevice {
        }
        ~RoomCircuit() = default;
        int16_t temp_;
-        int8_t  humidity_;
+        uint8_t humidity_;
        uint8_t seltemp_;
        uint8_t mode_;
        char    name_[51];
        int16_t dewtemp_;
        uint8_t childlock_;
        uint8_t icon_;
+        uint8_t coolmode_;
        // uint8_t tempautotemp_;
        // uint8_t manualtemp_;
+        // uint8_t coolautotemp_;
+        // uint8_t cooltemp_;

        uint8_t room() {
            return room_;
@@ -62,9 +65,11 @@ class Connect : public EMSdevice {
    void process_roomThermostatParam(std::shared_ptr<const Telegram> telegram);
    void process_roomThermostatData(std::shared_ptr<const Telegram> telegram);
    void process_roomSchedule(std::shared_ptr<const Telegram> telegram);
+    void process_roomConfig(std::shared_ptr<const Telegram> telegram);
    bool set_mode(const char * value, const int8_t id);
    bool set_seltemp(const char * value, const int8_t id);
    bool set_name(const char * value, const int8_t id);
+    bool set_coolmode(const char * value, const int8_t id);
    bool set_childlock(const char * value, const int8_t id);
    bool set_icon(const char * value, const int8_t id);

@@ -175,7 +175,9 @@ Thermostat::Thermostat(uint8_t device_type, uint8_t device_id, uint8_t product_i
            register_telegram_type(set_typeids[i], "RC300Set", false, MAKE_PF_CB(process_RC300Set), 29);
            register_telegram_type(summer_typeids[i], "RC300Summer", false, MAKE_PF_CB(process_RC300Summer), 14);
            register_telegram_type(curve_typeids[i], "RC300Curves", false, MAKE_PF_CB(process_RC300Curve), 9);
-            register_telegram_type(summer2_typeids[i], "RC300Summer2", false, MAKE_PF_CB(process_RC300Summer2), 8);
+            if (model != EMSdevice::EMS_DEVICE_FLAG_UI800) {
+                register_telegram_type(summer2_typeids[i], "RC300Sumr2", false, MAKE_PF_CB(process_RC300Summer2), 8);
+            }
        }
        const size_t set2_size = set2_typeids.size();
        for (uint8_t i = 0; i < set2_size; i++) {
@@ -207,7 +209,9 @@ Thermostat::Thermostat(uint8_t device_type, uint8_t device_id, uint8_t product_i
        register_telegram_type(0x16E, "Absent", true, MAKE_PF_CB(process_Absent), 1);
        register_telegram_type(0xBF, "ErrorMessage", false, MAKE_PF_CB(process_ErrorMessageBF));
        register_telegram_type(0xC0, "RCErrorMessage", false, MAKE_PF_CB(process_RCErrorMessage2));
-        register_telegram_type(0x470, "RC300Summer2", true, MAKE_PF_CB(process_RC300Summer2), 8);
+        if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_telegram_type(0x470, "RC300Summer3", true, MAKE_PF_CB(process_RC300Summer3), 8);
+        }
        EMSESP::send_read_request(0xC0, device_id, 0, 20); // read last errorcode on start (only published on errors)

        // JUNKERS/HT3
@@ -543,7 +547,7 @@ uint8_t Thermostat::HeatingCircuit::get_mode() const {
        } else {
            return HeatingCircuit::Mode::OFF;
        }
-    } else if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
+    } else if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_UI800 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
        if (mode_new == 0) {
            return HeatingCircuit::Mode::OFF;
        } else if (mode_new == 1) {
@@ -607,7 +611,7 @@ uint8_t Thermostat::HeatingCircuit::get_mode_type() const {
            return HeatingCircuit::Mode::ON;
        }
    } else if (model == EMSdevice::EMS_DEVICE_FLAG_RC300 || model == EMSdevice::EMS_DEVICE_FLAG_R3000 || model == EMSdevice::EMS_DEVICE_FLAG_BC400
-               || model == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+               || model == EMSdevice::EMS_DEVICE_FLAG_UI800 || model == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
        if (modetype == 0) {
            return HeatingCircuit::Mode::ECO;
        } else if (modetype == 1) {
@@ -806,16 +810,16 @@ void Thermostat::process_RemoteTemp(std::shared_ptr<const Telegram> telegram) {
 // e.g. "38 10 FF 00 03 7B 08 24 00 4B"
 void Thermostat::process_RemoteHumidity(std::shared_ptr<const Telegram> telegram) {
    // has_update(telegram, dewtemperature_, 0); // this is int8
-    has_update(telegram, humidity_, 1);
-    has_update(telegram, dewtemperature_, 2); // this is int16
    // some thermostats use short telegram with int8 dewpoint, https://github.com/emsesp/EMS-ESP32/issues/1491
-    if (telegram->offset == 0 && telegram->message_length < 4) {
-        int8_t dew = dewtemperature_ / 10;
-        telegram->read_value(dew, 0);
-        if (dew != EMS_VALUE_INT8_NOTSET && dewtemperature_ != dew * 10) {
-            dewtemperature_ = dew * 10;
-            has_update(dewtemperature_);
-        }
+    // but it's not a dewpoint in offset 0, removed, see https://github.com/emsesp/EMS-ESP32/issues/3135
+    has_update(telegram, humidity_, 1);
+    // has_update(telegram, dewtemperature_, 2); // this is int16
+    int16_t dew = EMS_VALUE_INT16_NOTSET;
+    if (telegram->read_value(dew, 2)) {
+        has_update(dewtemperature_, dew);
+    } else if (telegram->offset == 0 && telegram->message_length < 4) {
+        dew = Helpers::calc_dew(tempsensor1_, humidity_);
+        has_update(dewtemperature_, dew);
    }
 }

@@ -1264,18 +1268,25 @@ void Thermostat::process_RC300Summer(std::shared_ptr<const Telegram> telegram) {
    has_update(telegram, hc->comfortPointTemp, 12);
 }

+// type 0x470, only BC400/UI800
+// (0x470), data: 01 0E 01 01 02 17 04 48
+void Thermostat::process_RC300Summer3(std::shared_ptr<const Telegram> telegram) {
+    has_update(telegram, hpoperatingmode, 0);
+    has_update(telegram, summertemp, 1);
+    has_update(telegram, heatondelay, 2);
+    has_update(telegram, heatoffdelay, 3);
+    has_update(telegram, instantstart, 4);
+    has_update(telegram, coolstart, 5);
+    has_update(telegram, coolondelay, 6);
+    has_update(telegram, cooloffdelay, 7);
+}
+
 // types 0x471 ff summer2_typeids
 // (0x473), data: 00 11 04 01 01 1C 08 04
 void Thermostat::process_RC300Summer2(std::shared_ptr<const Telegram> telegram) {
    auto hc = heating_circuit(telegram);
    if (hc == nullptr) {
-        // telegram 0x470 see https://github.com/emsesp/EMS-ESP32/issues/2686
-        if (telegram->type_id == 0x470 && telegram->message_length > 2) {
-            hc                 = heating_circuit(1);
-            summer2_typeids[0] = 0x470;
-        } else {
-            return;
-        }
+        return;
    }
    if (hc->statusbyte & 1) {
        has_update(telegram, hc->summersetmode, 0);
@@ -1334,7 +1345,7 @@ void Thermostat::process_RC300WWmode(std::shared_ptr<const Telegram> telegram) {
    // circulation pump see: https://github.com/Th3M3/buderus_ems-wiki/blob/master/Einstellungen%20der%20Bedieneinheit%20RC310.md
    has_update(telegram, dhw->wwCircPump_, 1); // FF=off, 0=on ?

-    if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
        has_enumupdate(telegram, dhw->wwMode_, 2, {0, 5, 1, 2, 4});
    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_R3000) {
        // https://github.com/emsesp/EMS-ESP32/pull/1722#discussion_r1582823521
@@ -1455,14 +1466,21 @@ void Thermostat::process_HPMode(std::shared_ptr<const Telegram> telegram) {
 }

 // 0x467 ff HP settings
+// thermostat(0x10) -W-> Me(0x0B), ?(0x0467), data: 0A 15 00 01 04 (from #1187)
+// thermostat(0x10) W me(0x0B), HPSet(0x0467), data: 14 13 02 01 02 (from #3144)
 void Thermostat::process_HPSet(std::shared_ptr<const Telegram> telegram) {
    auto hc = heating_circuit(telegram);
    if (hc == nullptr) {
        return;
    }
-    has_update(telegram, hc->dewoffset, 4);     // 7-35°C
-    has_update(telegram, hc->roomtempdiff, 3);  // 1-10K
-    has_update(telegram, hc->hpminflowtemp, 0); // 2-10K
+    if (hc->control == 3 || hc->control == 6) {     // control with humidity
+        has_update(telegram, hc->hpminflowtemp, 0); // 7-35°C
+    } else {
+        has_update(telegram, hc->hpminflowtemp, 1); // 7-35°C
+    }
+    // has_update(telegram, hc->roomtempoffset, 2); // 1-10K // not implemented, mentioned in #3144
+    has_update(telegram, hc->roomtempdiff, 3); // 1-10K
+    has_update(telegram, hc->dewoffset, 4);    // 2-10K
 }

 // type 0x41 - data from the RC30 thermostat(0x10) - 14 bytes long
@@ -1720,9 +1738,18 @@ void Thermostat::process_RCTime(std::shared_ptr<const Telegram> telegram) {
    }

    // check clock
-    time_t now   = time(nullptr);
-    tm *   tm_   = localtime(&now);
-    bool   tset_ = tm_->tm_year > 110;                       // year 2010 and up, time is valid
+    time_t now  = time(nullptr);
+    bool   sync = false;
+    // change to thermostat timezone if different
+    EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+        sync = settings.thermostat_sync != 0;
+        if (settings.thermostat_sync == 2) {
+            setenv("TZ", settings.tzFormatT.c_str(), 1);
+            tzset();
+        }
+    });
+    tm * tm_     = localtime(&now);
+    bool tset_   = tm_->tm_year > 110;                       // year 2010 and up, time is valid
    tm_->tm_year = (telegram->message_data[0] & 0x7F) + 100; // IVT
    tm_->tm_mon  = telegram->message_data[1] - 1;
    tm_->tm_mday = telegram->message_data[3];
@@ -1738,20 +1765,27 @@ void Thermostat::process_RCTime(std::shared_ptr<const Telegram> telegram) {
    strftime(newdatetime, sizeof(dateTime_), "%d.%m.%Y %H:%M", tm_);
    has_update(dateTime_, newdatetime, sizeof(dateTime_));

-    bool   ivtclock     = (telegram->message_data[0] & 0x80) == 0x80; // dont sync ivt-clock, #439
-    bool   junkersclock = model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS;
-    time_t ttime        = mktime(tm_); // thermostat time
+    bool ivtclock = (telegram->message_data[0] & 0x80) == 0x80; // dont sync ivt-clock, #439
+    tm_->tm_isdst = -1;                                         // determine dst
+    time_t ttime  = mktime(tm_);                                // make thermostat time
+    // change back emsesp timezone
+    EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+        if (settings.thermostat_sync == 2) {
+            setenv("TZ", settings.tzFormat.c_str(), 1);
+            tzset();
+        }
+    });
    // correct thermostat clock if we have valid ntp time, and could write the command
-    if (!ivtclock && !junkersclock && tset_ && EMSESP::system_.ntp_connected() && !EMSESP::system_.readonly_mode() && has_command(&dateTime_)) {
-        double difference = difftime(now, ttime);
+    if (sync && !ivtclock && tset_ && EMSESP::system_.ntp_connected() && !EMSESP::system_.readonly_mode() && has_command(&dateTime_)) {
+        int difference = difftime(now, ttime);
        if (difference > 15 || difference < -15) {
            if (setTimeRetry < 3) {
                if (!use_dst) {
                    set_datetime("ntp", 0); // set from NTP without dst
-                    LOG_INFO("thermostat time correction from ntp, ignoring dst");
+                    LOG_INFO("thermostat time correction %d seconds from ntp, ignoring dst", difference);
                } else {
                    set_datetime("ntp", -1); // set from NTP
-                    LOG_INFO("thermostat time correction from ntp");
+                    LOG_INFO("thermostat time correction %d seconds from ntp", difference);
                }
                setTimeRetry++;
            }
@@ -1761,10 +1795,6 @@ void Thermostat::process_RCTime(std::shared_ptr<const Telegram> telegram) {
    }
 #ifndef EMSESP_STANDALONE
    if (!tset_ && tm_->tm_year > 110) { // emsesp clock not set, but thermostat clock
-        if (ivtclock) {
-            tm_->tm_isdst = -1;          // determine dst
-            ttime         = mktime(tm_); // thermostat time
-        }
        struct timeval newnow = {.tv_sec = ttime, .tv_usec = 0};
 #if CONFIG_IDF_TARGET_ESP32C3
        // unknown how to set time on C3
@@ -1915,7 +1945,11 @@ bool Thermostat::set_hpminflowtemp(const char * value, const int8_t id) {
    }
    int v;
    if (Helpers::value2temperature(value, v)) {
-        write_command(hp_typeids[hc->hc()], 0, v, hp_typeids[hc->hc()]);
+        if (hc->control == 3 || hc->control == 6) { // remotes with humidity
+            write_command(hp_typeids[hc->hc()], 0, v, hp_typeids[hc->hc()]);
+        } else {
+            write_command(hp_typeids[hc->hc()], 1, v, hp_typeids[hc->hc()]);
+        }
        return true;
    }
    return false;
@@ -2355,7 +2389,7 @@ bool Thermostat::set_control(const char * value, const int8_t id) {
        }
        // BC400
        // 1-RC100, 2-RC100H, 3-RC200
-    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400) {
+    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
        if (Helpers::value2enum(value, ctrl, FL_(enum_control2))) {
            write_command(hpmode_typeids[hc->hc()], 3, ctrl);
            hc->control = ctrl; // set in advance, dont wait for verify
@@ -2435,7 +2469,7 @@ bool Thermostat::set_wwmode(const char * value, const int8_t id) {
            return false;
        }
        write_command(0xB0, 2, set, 0xB0);
-    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+    } else if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
        if (!Helpers::value2enum(value, set, FL_(enum_wwMode4), {0, 5, 1, 2, 4})) { // off, eco+, eco, comfort, auto
            return false;
        }
@@ -2590,30 +2624,36 @@ bool Thermostat::set_cooling(const char * value, const int8_t id) {

 // set cooling delays
 bool Thermostat::set_coolondelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 6, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 6, v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 6, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

 bool Thermostat::set_cooloffdelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 7, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 7, v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 7, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

@@ -3038,6 +3078,15 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
    if (dt == "ntp") {
        time_t now = time(nullptr);
        tm *   tm_ = localtime(&now);
+        EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+            if (settings.thermostat_sync == 2) {
+                setenv("TZ", settings.tzFormatT.c_str(), 1);
+                tzset();
+                tm_ = localtime(&now);
+                setenv("TZ", settings.tzFormat.c_str(), 1);
+                tzset();
+            }
+        });
        if (tm_->tm_year < 110) { // no valid time
            return false;
        }
@@ -3053,11 +3102,7 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
        data[5] = tm_->tm_sec;
        data[6] = (tm_->tm_wday + 6) % 7;            // Bosch counts from Mo, time from Su
        data[7] = (id == 0) ? 2 : tm_->tm_isdst + 2; // set DST and flag for ext. clock
-        if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
-            data[6]++; // Junkers use 1-7;
-            data[7] = 0;
-        }
-    } else if (dt.length() == 23) {
+    } else if (dt.length() == 23 || dt.length() == 21) {
        data[0] = (dt[7] - '0') * 100 + (dt[8] - '0') * 10 + (dt[9] - '0'); // year
        data[1] = (dt[3] - '0') * 10 + (dt[4] - '0');                       // month
        data[2] = (dt[11] - '0') * 10 + (dt[12] - '0');                     // hour
@@ -3065,10 +3110,35 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
        data[4] = (dt[14] - '0') * 10 + (dt[15] - '0');                     // min
        data[5] = (dt[17] - '0') * 10 + (dt[18] - '0');                     // sec
        data[6] = (dt[20] - '0');                                           // day of week, Mo:0
-        data[7] = (dt[22] - '0') + 2;                                       // DST and flag
-        if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
-            data[7] = 0;
-        }
+        data[7] = dt.length() == 21 ? 2 : (dt[22] - '0') + 2;               // DST and flag
+    } else if (dt.length() == 19 || dt.length() == 16) {
+        time_t now   = time(nullptr);
+        tm *   tm_   = localtime(&now);
+        data[0]      = (dt[7] - '0') * 100 + (dt[8] - '0') * 10 + (dt[9] - '0'); // year
+        tm_->tm_year = 100 + data[0];
+        data[1]      = (dt[3] - '0') * 10 + (dt[4] - '0'); // month
+        tm_->tm_mon  = data[1] - 1;
+        tm_->tm_hour = data[2] = (dt[11] - '0') * 10 + (dt[12] - '0');                        // hour
+        tm_->tm_mday = data[3] = (dt[0] - '0') * 10 + (dt[1] - '0');                          // day
+        tm_->tm_min = data[4] = (dt[14] - '0') * 10 + (dt[15] - '0');                         // min
+        tm_->tm_sec = data[5] = dt.length() == 16 ? 0 : (dt[17] - '0') * 10 + (dt[18] - '0'); // sec
+        tm_->tm_isdst         = -1;
+        // use thermostat time zone to determine day of week and daylight saving
+        EMSESP::esp32React.getNTPSettingsService()->read([&](const NTPSettings & settings) {
+            if (settings.thermostat_sync == 2) {
+                setenv("TZ", settings.tzFormatT.c_str(), 1);
+                tzset();
+                auto t = mktime(tm_);
+                tm_    = localtime(&t);
+                setenv("TZ", settings.tzFormat.c_str(), 1);
+                tzset();
+            } else {
+                auto t = mktime(tm_);
+                tm_    = localtime(&t);
+            }
+        });
+        data[6] = (tm_->tm_wday + 6) % 7; // Bosch counts from Mo, time from Su
+        data[7] = tm_->tm_isdst + 2;      // set DST and flag for ext. clock
    } else {
        LOG_WARNING("Set date: invalid data, wrong length");
        return false;
@@ -3078,6 +3148,11 @@ bool Thermostat::set_datetime(const char * value, const int8_t id) {
        return false;
    }

+    if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
+        data[6]++;   // Junkers use 1-7 for day of the week
+        data[7] = 0; // no dst setting
+    }
+
    // LOG_INFO("Setting date and time: %02d.%02d.2%03d-%02d:%02d:%02d-%d-%d", data[3], data[1], data[0], data[2], data[4], data[5], data[6], data[7]);
    write_command(EMS_TYPE_time, 0, data, 8, EMS_TYPE_time);

@@ -3142,6 +3217,7 @@ bool Thermostat::set_mode(const char * value, const int8_t id) {
        mode_list = FL_(enum_mode3);
        break;
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
        mode_list = FL_(enum_mode2);
        break;
@@ -3279,6 +3355,7 @@ bool Thermostat::set_mode_n(const uint8_t mode, const int8_t id) {
        offset = EMS_OFFSET_RC35Set_mode;
        break;
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
        offset = EMS_OFFSET_RCPLUSSet_mode_new;
        break;
@@ -3318,7 +3395,7 @@ bool Thermostat::set_mode_n(const uint8_t mode, const int8_t id) {
    // set hc->mode temporary until validate is received
    if (model_ == EMSdevice::EMS_DEVICE_FLAG_RC10) {
        hc->mode = set_mode_value >> 1;
-    } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_BC400 || model_ == EMSdevice::EMS_DEVICE_FLAG_CR120) {
+    } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_BC400 || model_ == EMSdevice::EMS_DEVICE_FLAG_UI800 || model_ == EMSdevice::EMS_DEVICE_FLAG_CR120) {
        hc->mode_new = set_mode_value;
    } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_RC300 || model_ == EMSdevice::EMS_DEVICE_FLAG_R3000 || model_ == EMSdevice::EMS_DEVICE_FLAG_HMC310
               || model_ == EMSdevice::EMS_DEVICE_FLAG_RC100) {
@@ -3335,13 +3412,19 @@ bool Thermostat::set_mode_n(const uint8_t mode, const int8_t id) {

 // sets the thermostat summermode for RC300
 bool Thermostat::set_summermode(const char * value, const int8_t id) {
+    uint8_t set;
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        if (Helpers::value2enum(value, set, FL_(enum_hpoperatingmode))) {
+            write_command(0x470, 0, set, 0x470);
+            return true;
+        }
+        return false;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }

-    uint8_t set;
-
    if (is_received(summer2_typeids[hc->hc()])) {
        if ((hc->statusbyte & 1) && Helpers::value2enum(value, set, FL_(enum_summermode))) {
            write_command(summer2_typeids[hc->hc()], 0, set, summer2_typeids[hc->hc()]);
@@ -3487,40 +3570,52 @@ bool Thermostat::set_boosttime(const char * value, const int8_t id) {
 }

 bool Thermostat::set_heatondelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 2, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 2, (uint8_t)v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 2, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

 bool Thermostat::set_heatoffdelay(const char * value, const int8_t id) {
+    float f;
+    if (!Helpers::value2float(value, f)) {
+        return false;
+    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 3, (uint8_t)(f * 4), 0x470);
+        return true;
+    }
    auto hc = heating_circuit(id);
    if (hc == nullptr) {
        return false;
    }
-    int v;
-    if (!Helpers::value2number(value, v)) {
-        return false;
-    }
-    write_command(summer2_typeids[hc->hc()], 3, (uint8_t)v, summer2_typeids[hc->hc()]);
+    write_command(summer2_typeids[hc->hc()], 3, (uint8_t)f, summer2_typeids[hc->hc()]);
    return true;
 }

 bool Thermostat::set_instantstart(const char * value, const int8_t id) {
-    auto hc = heating_circuit(id);
-    if (hc == nullptr) {
-        return false;
-    }
    int v;
    if (!Helpers::value2number(value, v)) {
        return false;
    }
+    if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+        write_command(0x470, 4, (uint8_t)v, 0x470);
+        return true;
+    }
+    auto hc = heating_circuit(id);
+    if (hc == nullptr) {
+        return false;
+    }
    write_command(summer2_typeids[hc->hc()], 4, (uint8_t)v, summer2_typeids[hc->hc()]);
    return true;
 }
@@ -4045,6 +4140,10 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
        validate_typeid = set_typeids[hc->hc()];
        switch (mode) {
        case HeatingCircuit::Mode::SUMMER:
+            if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+                write_command(0x470, 1, temperature, 0x470);
+                return true;
+            }
            if (is_received(summer2_typeids[hc->hc()])) {
                offset     = 0x01;
                set_typeid = summer2_typeids[hc->hc()];
@@ -4056,6 +4155,10 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
            factor          = 1;
            break;
        case HeatingCircuit::Mode::COOLSTART:
+            if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+                write_command(0x470, 5, temperature, 0x470);
+                return true;
+            }
            offset          = 5;
            set_typeid      = summer2_typeids[hc->hc()];
            validate_typeid = set_typeid;
@@ -4144,7 +4247,7 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
            if (model == EMSdevice::EMS_DEVICE_FLAG_CR120 && mode_ == HeatingCircuit::Mode::MANUAL) {
                offset = 22; // manual offset CR120
            } else if (mode_ == HeatingCircuit::Mode::MANUAL) {
-                offset = 10; // manual offset
+                offset = hc->hpoperatingstate == 2 ? 17 : 10; // cooling or manual offset
            } else {
                offset = 8; // auto offset
                // special case to reactivate auto temperature, see #737, #746
@@ -4443,6 +4546,7 @@ void Thermostat::register_device_values() {
    case EMSdevice::EMS_DEVICE_FLAG_RC300:
    case EMSdevice::EMS_DEVICE_FLAG_R3000:
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
    case EMSdevice::EMS_DEVICE_FLAG_HMC310:
        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
@@ -4560,6 +4664,70 @@ void Thermostat::register_device_values() {
        register_device_value(
            DeviceValueTAG::TAG_DEVICE_DATA, &pvLowerCool_, DeviceValueType::INT8, FL_(pvLowerCool), DeviceValueUOM::K, MAKE_CF_CB(set_pvLowerCool), -5, 0);
        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &absent_, DeviceValueType::BOOL, FL_(absent), DeviceValueUOM::NONE, MAKE_CF_CB(set_absent));
+        if (model() == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &hpoperatingmode,
+                                  DeviceValueType::ENUM,
+                                  FL_(enum_hpoperatingmode),
+                                  FL_(hpoperatingmode),
+                                  DeviceValueUOM::NONE,
+                                  MAKE_CF_CB(set_summermode));
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &summertemp,
+                                  DeviceValueType::UINT8,
+                                  FL_(summertemp),
+                                  DeviceValueUOM::DEGREES,
+                                  MAKE_CF_CB(set_summertemp),
+                                  10,
+                                  30);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &instantstart,
+                                  DeviceValueType::UINT8,
+                                  FL_(instantstart),
+                                  DeviceValueUOM::K,
+                                  MAKE_CF_CB(set_instantstart),
+                                  1,
+                                  10);
+            register_device_value(
+                DeviceValueTAG::TAG_DEVICE_DATA, &coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &heatondelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(heatondelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_heatondelay),
+                                  1,
+                                  48);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &heatoffdelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(heatoffdelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_heatoffdelay),
+                                  1,
+                                  48);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &coolondelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(coolondelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_coolondelay),
+                                  1,
+                                  48);
+            register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
+                                  &cooloffdelay,
+                                  DeviceValueType::UINT8,
+                                  DeviceValueNumOp::DV_NUMOP_DIV4,
+                                  FL_(cooloffdelay),
+                                  DeviceValueUOM::HOURS,
+                                  MAKE_CF_CB(set_cooloffdelay),
+                                  1,
+                                  48);
+        }
+
        break;
    case EMSdevice::EMS_DEVICE_FLAG_RC10:
        register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
@@ -4902,9 +5070,10 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
    case EMSdevice::EMS_DEVICE_FLAG_RC300:
    case EMSdevice::EMS_DEVICE_FLAG_R3000:
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
    case EMSdevice::EMS_DEVICE_FLAG_HMC310:
-        if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
+        if (model == EMSdevice::EMS_DEVICE_FLAG_BC400 || model == EMSdevice::EMS_DEVICE_FLAG_UI800 || model == EMSdevice::EMS_DEVICE_FLAG_CR120) {
            register_device_value(tag, &hc->mode_new, DeviceValueType::ENUM, FL_(enum_mode2), FL_(mode), DeviceValueUOM::NONE, MAKE_CF_CB(set_mode));
        } else {
            register_device_value(tag, &hc->mode, DeviceValueType::ENUM, FL_(enum_mode), FL_(mode), DeviceValueUOM::NONE, MAKE_CF_CB(set_mode));
@@ -4997,6 +5166,8 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
        register_device_value(tag, &hc->hpminflowtemp, DeviceValueType::UINT8, FL_(hpminflowtemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_hpminflowtemp));
        if (model == EMSdevice::EMS_DEVICE_FLAG_BC400) {
            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control2), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
+        } else if (model == EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control3), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
        } else {
            register_device_value(tag, &hc->control, DeviceValueType::ENUM, FL_(enum_control1), FL_(control), DeviceValueUOM::NONE, MAKE_CF_CB(set_control));
        }
@@ -5012,14 +5183,16 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
                                  101);
            register_device_value(tag, &hc->remotehum, DeviceValueType::CMD, FL_(remotehum), DeviceValueUOM::PERCENT, MAKE_CF_CB(set_remotehum), -1, 101);
        }
-        register_device_value(tag, &hc->heatondelay, DeviceValueType::UINT8, FL_(heatondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatondelay), 1, 48);
-        register_device_value(tag, &hc->heatoffdelay, DeviceValueType::UINT8, FL_(heatoffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatoffdelay), 1, 48);
-        register_device_value(tag, &hc->instantstart, DeviceValueType::UINT8, FL_(instantstart), DeviceValueUOM::K, MAKE_CF_CB(set_instantstart), 1, 10);
+        if (model != EMSdevice::EMS_DEVICE_FLAG_UI800) {
+            register_device_value(tag, &hc->heatondelay, DeviceValueType::UINT8, FL_(heatondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatondelay), 1, 48);
+            register_device_value(tag, &hc->heatoffdelay, DeviceValueType::UINT8, FL_(heatoffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_heatoffdelay), 1, 48);
+            register_device_value(tag, &hc->coolondelay, DeviceValueType::UINT8, FL_(coolondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_coolondelay), 1, 48);
+            register_device_value(tag, &hc->cooloffdelay, DeviceValueType::UINT8, FL_(cooloffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_cooloffdelay), 1, 48);
+            register_device_value(tag, &hc->instantstart, DeviceValueType::UINT8, FL_(instantstart), DeviceValueUOM::K, MAKE_CF_CB(set_instantstart), 1, 10);
+            register_device_value(tag, &hc->coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
+        }
        register_device_value(tag, &hc->boost, DeviceValueType::BOOL, FL_(boost), DeviceValueUOM::NONE, MAKE_CF_CB(set_boost));
        register_device_value(tag, &hc->boosttime, DeviceValueType::UINT8, FL_(boosttime), DeviceValueUOM::HOURS, MAKE_CF_CB(set_boosttime));
-        register_device_value(tag, &hc->coolstart, DeviceValueType::UINT8, FL_(coolstart), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_coolstart), 20, 35);
-        register_device_value(tag, &hc->coolondelay, DeviceValueType::UINT8, FL_(coolondelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_coolondelay), 1, 48);
-        register_device_value(tag, &hc->cooloffdelay, DeviceValueType::UINT8, FL_(cooloffdelay), DeviceValueUOM::HOURS, MAKE_CF_CB(set_cooloffdelay), 1, 48);
        register_device_value(tag,
                              &hc->switchProgMode,
                              DeviceValueType::ENUM,
@@ -5037,8 +5210,8 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
                              MAKE_CF_CB(set_redthreshold),
                              12,
                              22);
-        register_device_value(tag, &hc->solarInfl, DeviceValueType::UINT8, FL_(solarinfl), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_solarinfl), -5, -1);
-        register_device_value(tag, &hc->currSolarInfl, DeviceValueType::UINT8, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(currsolarinfl), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &hc->solarInfl, DeviceValueType::INT8, FL_(solarinfl), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_solarinfl), -5, 0);
+        register_device_value(tag, &hc->currSolarInfl, DeviceValueType::INT8, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(currsolarinfl), DeviceValueUOM::DEGREES);
        register_device_value(tag, &hc->heatingpid, DeviceValueType::ENUM, FL_(enum_PID), FL_(heatingPID), DeviceValueUOM::NONE, MAKE_CF_CB(set_heatingpid));
        register_device_value(tag, &hc->pumpopt, DeviceValueType::BOOL, FL_(pumpopt), DeviceValueUOM::NONE, MAKE_CF_CB(set_pumpopt));
        register_device_value(tag,
@@ -5359,9 +5532,10 @@ void Thermostat::register_device_values_dhw(std::shared_ptr<Thermostat::DhwCircu
    case EMSdevice::EMS_DEVICE_FLAG_RC300:
    case EMSdevice::EMS_DEVICE_FLAG_R3000:
    case EMSdevice::EMS_DEVICE_FLAG_BC400:
+    case EMSdevice::EMS_DEVICE_FLAG_UI800:
    case EMSdevice::EMS_DEVICE_FLAG_CR120:
    case EMSdevice::EMS_DEVICE_FLAG_HMC310:
-        if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
+        if (model() == EMSdevice::EMS_DEVICE_FLAG_BC400 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310) {
            register_device_value(tag, &dhw->wwMode_, DeviceValueType::ENUM, FL_(enum_wwMode4), FL_(wwMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwmode));
        } else if (model() == EMSdevice::EMS_DEVICE_FLAG_R3000) {
            register_device_value(tag, &dhw->wwMode_, DeviceValueType::ENUM, FL_(enum_wwMode5), FL_(wwMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwmode));
@@ -241,7 +241,7 @@ class Thermostat : public EMSdevice {
    // check to see if the thermostat is a hybrid of the R300
    inline bool isRC300() const {
        return (model() == EMSdevice::EMS_DEVICE_FLAG_RC300 || model() == EMSdevice::EMS_DEVICE_FLAG_R3000 || model() == EMSdevice::EMS_DEVICE_FLAG_BC400
-                || model() == EMSdevice::EMS_DEVICE_FLAG_CR120 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310);
+                || model() == EMSdevice::EMS_DEVICE_FLAG_CR120 || model() == EMSdevice::EMS_DEVICE_FLAG_HMC310 || model() == EMSdevice::EMS_DEVICE_FLAG_UI800);
    }

    inline uint8_t id2dhw(const int8_t id) const { // returns telegram offset for TAG(id)
@@ -296,6 +296,16 @@ class Thermostat : public EMSdevice {
    uint8_t absent_;
    uint8_t hasSolar_;

+    // BC400/UI800 telegram 0x470
+    uint8_t hpoperatingmode;
+    uint8_t summertemp;
+    uint8_t heatondelay;
+    uint8_t heatoffdelay;
+    uint8_t instantstart;
+    uint8_t coolstart;
+    uint8_t coolondelay;
+    uint8_t cooloffdelay;
+
    // HybridHP
    uint8_t hybridStrategy_;  // co2 = 1, cost = 2, temperature = 3, mix = 4
    int8_t  switchOverTemp_;  // degrees
@@ -451,6 +461,7 @@ class Thermostat : public EMSdevice {
    void process_RC300Set2(std::shared_ptr<const Telegram> telegram);
    void process_RC300Summer(std::shared_ptr<const Telegram> telegram);
    void process_RC300Summer2(std::shared_ptr<const Telegram> telegram);
+    void process_RC300Summer3(std::shared_ptr<const Telegram> telegram);
    void process_RC300WWmode(std::shared_ptr<const Telegram> telegram);
    void process_RC300WWmode2(std::shared_ptr<const Telegram> telegram);
    void process_RC300WWtemp(std::shared_ptr<const Telegram> telegram);
@@ -28,9 +28,41 @@ Water::Water(uint8_t device_type, uint8_t device_id, uint8_t product_id, const c
    : EMSdevice(device_type, device_id, product_id, version, name, flags, brand) {
    dhw_       = device_id - EMSdevice::EMS_DEVICE_ID_DHW1;
    int8_t tag = DeviceValueTAG::TAG_DHW1 + dhw_;
-    if (flags == EMSdevice::EMS_DEVICE_FLAG_SM100) { // device_id 0x2A,  DHW3
-
-        // telegram handlers
+    if (flags == EMSdevice::EMS_DEVICE_FLAG_IPM) {
+        dhw_ = 0;
+        tag  = DeviceValueTAG::TAG_DHW1;
+        register_telegram_type(0x34, "UBAMonitorWW", false, MAKE_PF_CB(process_IPMMonitorWW));
+        register_telegram_type(0x1E, "HydrTemp", false, MAKE_PF_CB(process_IPMHydrTemp));
+        register_telegram_type(0x33, "UBAParameterWW", true, MAKE_PF_CB(process_IPMParameterWW), 12);
+        // register_telegram_type(0x10D, "wwNTCStatus", false, MAKE_PF_CB(process_wwNTCStatus));
+        // device values...
+        register_device_value(tag, &wwSelTemp_, DeviceValueType::UINT8, FL_(wwSelTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwSelTemp));
+        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &wwTemp2_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwCurTemp2), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &HydrTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(hydrTemp), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
+        register_device_value(tag, &wwFlowTempOffset_, DeviceValueType::UINT8, FL_(wwFlowTempOffset), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwFlowTempOffset));
+        register_device_value(tag, &wwHystOn_, DeviceValueType::INT8, FL_(wwHystOn), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOn));
+        register_device_value(tag, &wwHystOff_, DeviceValueType::INT8, FL_(wwHystOff), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOff));
+        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
+        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
+        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
+    } else if (tag == DeviceValueTAG::TAG_DHW1 || tag == DeviceValueTAG::TAG_DHW2) { // MM100 or SM100
+        register_telegram_type(0x331 + dhw_, "MMPLUSStatusMessage_WWC", false, MAKE_PF_CB(process_MMPLUSStatusMessage_WWC));
+        register_telegram_type(0x313 + dhw_, "MMPLUSConfigMessage_WWC", true, MAKE_PF_CB(process_MMPLUSConfigMessage_WWC), 11);
+        // register_telegram_type(0x33B + type_offset, "MMPLUSSetMessage_WWC", true, MAKE_PF_CB(process_MMPLUSSetMessage_WWC));
+        // device values...
+        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
+        register_device_value(tag, &wwStatus_, DeviceValueType::INT8, FL_(wwTempStatus), DeviceValueUOM::NONE);
+        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
+        register_device_value(tag, &wwMaxTemp_, DeviceValueType::UINT8, FL_(wwMaxTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwMaxTemp));
+        register_device_value(tag, &wwDiffTemp_, DeviceValueType::INT8, FL_(wwDiffTemp), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwDiffTemp));
+        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
+        register_device_value(tag, &wwRedTemp_, DeviceValueType::UINT8, FL_(wwRedTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRedTemp));
+        register_device_value(tag, &wwRequiredTemp_, DeviceValueType::UINT8, FL_(wwRequiredTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRequiredTemp));
+        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
+        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
+    } else { // device_id 0x2A,  DHW3, SM100
        register_telegram_type(0x07D6 + dhw_ - 2, "SM100wwTemperature", false, MAKE_PF_CB(process_SM100wwTemperature));
        register_telegram_type(0x07E0 + dhw_ - 2, "SM100wwStatus2", true, MAKE_PF_CB(process_SM100wwStatus2), 10);
        register_telegram_type(0x07A6, "SM100wwParam", true, MAKE_PF_CB(process_SM100wwParam), 20); // same telegram for all circuits
@@ -67,41 +99,6 @@ Water::Water(uint8_t device_type, uint8_t device_id, uint8_t product_id, const c
        register_device_value(tag, &wwRetValve_, DeviceValueType::UINT8, FL_(valveReturn), DeviceValueUOM::PERCENT, MAKE_CF_CB(set_wwRetValve));
        register_device_value(tag, &wwDeltaTRet_, DeviceValueType::UINT8, FL_(deltaTRet), DeviceValueUOM::K, MAKE_CF_CB(set_wwDeltaTRet));
        register_device_value(tag, &errorDisp_, DeviceValueType::ENUM, FL_(enum_errorDisp), FL_(errorDisp), DeviceValueUOM::NONE, MAKE_CF_CB(set_errorDisp));
-
-    } else if (flags == EMSdevice::EMS_DEVICE_FLAG_MMPLUS) { // dhw1 and dhw 2
-        register_telegram_type(0x331 + dhw_, "MMPLUSStatusMessage_WWC", false, MAKE_PF_CB(process_MMPLUSStatusMessage_WWC));
-        register_telegram_type(0x313 + dhw_, "MMPLUSConfigMessage_WWC", true, MAKE_PF_CB(process_MMPLUSConfigMessage_WWC), 11);
-        // register_telegram_type(0x33B + type_offset, "MMPLUSSetMessage_WWC", true, MAKE_PF_CB(process_MMPLUSSetMessage_WWC));
-        // device values...
-        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &wwStatus_, DeviceValueType::INT8, FL_(wwTempStatus), DeviceValueUOM::NONE);
-        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
-        register_device_value(tag, &wwMaxTemp_, DeviceValueType::UINT8, FL_(wwMaxTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwMaxTemp));
-        register_device_value(tag, &wwDiffTemp_, DeviceValueType::INT8, FL_(wwDiffTemp), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwDiffTemp));
-        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
-        register_device_value(tag, &wwRedTemp_, DeviceValueType::UINT8, FL_(wwRedTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRedTemp));
-        register_device_value(tag, &wwRequiredTemp_, DeviceValueType::UINT8, FL_(wwRequiredTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwRequiredTemp));
-        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
-        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
-    } else if (flags == EMSdevice::EMS_DEVICE_FLAG_IPM) {
-        dhw_ = 0;
-        tag  = DeviceValueTAG::TAG_DHW1;
-        register_telegram_type(0x34, "UBAMonitorWW", false, MAKE_PF_CB(process_IPMMonitorWW));
-        register_telegram_type(0x1E, "HydrTemp", false, MAKE_PF_CB(process_IPMHydrTemp));
-        register_telegram_type(0x33, "UBAParameterWW", true, MAKE_PF_CB(process_IPMParameterWW), 12);
-        // register_telegram_type(0x10D, "wwNTCStatus", false, MAKE_PF_CB(process_wwNTCStatus));
-        // device values...
-        register_device_value(tag, &wwSelTemp_, DeviceValueType::UINT8, FL_(wwSelTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwSelTemp));
-        register_device_value(tag, &wwTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwTemp), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &wwTemp2_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(wwCurTemp2), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &HydrTemp_, DeviceValueType::UINT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(hydrTemp), DeviceValueUOM::DEGREES);
-        register_device_value(tag, &wwPump_, DeviceValueType::BOOL, FL_(wwPump), DeviceValueUOM::NONE);
-        register_device_value(tag, &wwFlowTempOffset_, DeviceValueType::UINT8, FL_(wwFlowTempOffset), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwFlowTempOffset));
-        register_device_value(tag, &wwHystOn_, DeviceValueType::INT8, FL_(wwHystOn), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOn));
-        register_device_value(tag, &wwHystOff_, DeviceValueType::INT8, FL_(wwHystOff), DeviceValueUOM::DEGREES_R, MAKE_CF_CB(set_wwHystOff));
-        register_device_value(tag, &wwDisinfectionTemp_, DeviceValueType::UINT8, FL_(wwDisinfectionTemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_wwDisinfectionTemp));
-        register_device_value(tag, &wwCirc_, DeviceValueType::BOOL, FL_(wwCirc), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCirc));
-        register_device_value(tag, &wwCircMode_, DeviceValueType::ENUM, FL_(enum_wwCircMode), FL_(wwCircMode), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwCircMode));
    }
 }

@@ -361,7 +358,11 @@ bool Water::set_wwCircTc(const char * value, const int8_t id) {
    if (!Helpers::value2bool(value, b)) {
        return false;
    }
-    write_command(0x33B + dhw_, 4, b ? 0x01 : 0x00, 0x33B + dhw_);
+    if (flags() == EMSdevice::EMS_DEVICE_FLAG_MMPLUS) {
+        write_command(0x33B + dhw_, 4, b ? 0x01 : 0x00, 0x33B + dhw_);
+    } else { // SM100
+        write_command(0x7A5, 4, b ? 0xFF : 0x00, 0x7A5);
+    }
    return true;
 }

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.8.2"
+#define EMSESP_APP_VERSION "3.8.6"
@@ -35,6 +35,11 @@ WebAPIService::WebAPIService(AsyncWebServer * server, SecurityManager * security
 // POST|GET api/{device}
 // POST|GET api/{device}/{entity}
 void WebAPIService::webAPIService(AsyncWebServerRequest * request, JsonVariant json) {
+    static uint64_t lastcall = 0;
+    if (uuid::get_uptime_ms() - lastcall < 50 && request->method() == HTTP_GET) {
+        request->send(429); //too many requests
+        return;
+    }
    JsonDocument input_doc; // has no body JSON so create dummy as empty input object
    JsonObject   input;
    // if no body then treat it as a secure GET
@@ -49,6 +54,7 @@ void WebAPIService::webAPIService(AsyncWebServerRequest * request, JsonVariant j
        input["data"] = json.as<std::string>();
    }
    parse(request, input);
+    lastcall = uuid::get_uptime_ms();
 }

 // for POSTS accepting plain text data
@@ -77,7 +77,9 @@ StateUpdateResult WebCustomEntity::update(JsonObject root, WebCustomEntity & web
        if (entityItem.ram == 2) { // NVS
            char key[sizeof(entityItem.name) + 2];
            snprintf(key, sizeof(key), "c:%s", entityItem.name);
-            EMSESP::nvs_.remove(key);
+            if (EMSESP::nvs_.isKey(key)) {
+                EMSESP::nvs_.remove(key);
+            }
        }
        if (entityItem.ram) { // save name/value pairs for change checking
            doc[entityItem.name] = entityItem.value;
@@ -76,7 +76,9 @@ StateUpdateResult WebScheduler::update(JsonObject root, WebScheduler & webSchedu
    for (ScheduleItem & scheduleItem : webScheduler.scheduleItems) {
        char key[sizeof(scheduleItem.name) + 2];
        snprintf(key, sizeof(key), "s:%s", scheduleItem.name);
-        EMSESP::nvs_.remove(key);
+        if (EMSESP::nvs_.isKey(key)) {
+            EMSESP::nvs_.remove(key);
+        }
    }
    webScheduler.scheduleItems.clear();
    EMSESP::webSchedulerService.ha_reset();
@@ -345,7 +347,11 @@ uint8_t WebSchedulerService::count_entities(bool cmd_only) {
 // execute scheduled command
 bool WebSchedulerService::command(const char * name, const std::string & command, const std::string & data) {
    std::string cmd = Helpers::toLower(command);
-
+    if (cmd == "system/message") {
+        EMSESP::logger().info("Message: %s", data.c_str()); // send to log
+        Mqtt::queue_publish(F_(message), data);             // send to MQTT if enabled
+        return true;
+    }
    // check http commands. e.g.
    // tasmota(get): http://<tasmotaIP>/cm?cmnd=power%20ON
    // shelly(get): http://<shellyIP>/relais/0?turn=on
@@ -353,7 +359,11 @@ bool WebSchedulerService::command(const char * name, const std::string & command
    JsonDocument doc;
    if (deserializeJson(doc, cmd) == DeserializationError::Ok) {
        HTTPClient * http = new HTTPClient;
-        std::string  url  = doc["url"] | "";
+#ifndef EMSESP_STANDALONE
+        http->setConnectTimeout(10000);
+        http->setTimeout(10000);
+#endif
+        std::string url = doc["url"] | "";
        // for a GET with parameters replace commands with values
        // don't search the complete url, it may contain a devicename in path
        auto q = url.find_first_of('?');
@@ -401,6 +411,7 @@ bool WebSchedulerService::command(const char * name, const std::string & command
            return true;
        }
        // we can add other json tests here
+        delete http;
    }

    doc.clear();
@@ -443,8 +454,7 @@ bool WebSchedulerService::command(const char * name, const std::string & command
 // queue schedules to be handled executed in scheduler-loop
 bool WebSchedulerService::onChange(const char * cmd) {
    for (ScheduleItem & scheduleItem : *scheduleItems_) {
-        if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_ONCHANGE
-            && Helpers::toLower(scheduleItem.time.c_str()).find(Helpers::toLower(cmd)) != std::string::npos) {
+        if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_ONCHANGE && Helpers::toLower(scheduleItem.time.c_str()) == Helpers::toLower(cmd)) {
            cmd_changed_.push_back(&scheduleItem);
            return true;
        }
@@ -480,15 +490,14 @@ void WebSchedulerService::loop() {
    static uint32_t last_uptime_min = 0;
    static uint32_t last_uptime_sec = 0;

-    if (!raw_value.empty()) { // process a value from system/message command
-        computed_value = compute(raw_value);
-        raw_value.clear();
-    }
-
    // get list of scheduler events and exit if it's empty
    if (scheduleItems_->empty()) {
        return;
    }
+    // do not execute any command in the first 60 secondes
+    if (uuid::get_uptime_sec() < 60) {
+        return;
+    }

    // check if we have onChange events
    while (!cmd_changed_.empty()) {
@@ -532,7 +541,8 @@ void WebSchedulerService::loop() {
            // retry startup commands not yet executed
            if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_TIMER && scheduleItem.elapsed_min == 0
                && scheduleItem.retry_cnt < MAX_STARTUP_RETRIES) {
-                scheduleItem.retry_cnt = command(scheduleItem.name, scheduleItem.cmd.c_str(), scheduleItem.value.c_str()) ? 0xFF : scheduleItem.retry_cnt + 1;
+                scheduleItem.retry_cnt =
+                    command(scheduleItem.name, scheduleItem.cmd.c_str(), compute(scheduleItem.value.c_str())) ? 0xFF : scheduleItem.retry_cnt + 1;
            }
            // scheduled timer commands
            if (scheduleItem.active && scheduleItem.flags == SCHEDULEFLAG_SCHEDULE_TIMER && scheduleItem.elapsed_min > 0
@@ -543,10 +553,10 @@ void WebSchedulerService::loop() {
        last_uptime_min = uptime_min;
    }

-    // check calender, sync to RTC, only execute if year is valid
+    // check calender, sync to RTC, only execute if year is valid and uptime more than a minute
    time_t now = time(nullptr);
    tm *   tm  = localtime(&now);
-    if (tm->tm_min != last_tm_min && tm->tm_year > 120) {
+    if (tm->tm_min != last_tm_min && tm->tm_year > 120 && uuid::get_uptime_sec() > 60) {
        // find the real dow and minute from RTC
        uint8_t  real_dow = 1 << tm->tm_wday; // 1 is Sunday
        uint16_t real_min = tm->tm_hour * 60 + tm->tm_min;
@@ -90,9 +90,6 @@ class WebSchedulerService : public StatefulService<WebScheduler> {

    std::string get_metrics_prometheus();

-    std::string raw_value;
-    std::string computed_value;
-
 #if defined(EMSESP_TEST)
    void load_test_data();
 #endif
@@ -267,6 +267,9 @@ StateUpdateResult WebSettings::update(JsonObject root, WebSettings & settings) {
    }

    settings.locale = root["locale"] | EMSESP_DEFAULT_LOCALE;
+    if (settings.locale == "cz") { // convert from older settings file
+        settings.locale = "cs";
+    }
    EMSESP::system_.locale(settings.locale);
    if (Mqtt::ha_enabled() && original_settings.locale != settings.locale) {
        add_flags(ChangeFlags::MQTT);
@@ -177,6 +177,10 @@ void WebStatusService::systemStatus(AsyncWebServerRequest * request) {
        // we're ready to do the actual restart ASAP
        EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_RESTART_REQUESTED);
    }
+    if (EMSESP::system_.systemStatus() == SYSTEM_STATUS::SYSTEM_STATUS_ERROR_UPLOAD) {
+        // error is reported, back to normal state
+        EMSESP::system_.systemStatus(SYSTEM_STATUS::SYSTEM_STATUS_NORMAL);
+    }

 #endif

@@ -241,6 +245,7 @@ void WebStatusService::action(AsyncWebServerRequest * request, JsonVariant json)
    if (!ok) {
        EMSESP::logger().err("Action '%s' failed", action.c_str());
        request->send(400); // bad request
+        delete response;
        return;
    }
Author	SHA1	Message	Date
proddy	0798775cd4	3.8.6	2026-09-24 20:39:05 +02:00
proddy	2a20c6c16d	3.8.6	2026-09-24 18:41:08 +02:00
proddy	4f1bae5e19	support newer rgb WS2812B V6 leds	2026-09-24 18:40:48 +02:00
proddy	91d2411885	update 3.8.5	2026-09-22 22:33:06 +02:00
proddy	5436277758	change message when upgrading to major release	2026-09-22 22:18:40 +02:00
proddy	c8a96352ec	3.8.4	2026-08-04 08:13:45 +02:00
proddy	02caaef916	fix firmware size check	2026-08-03 09:59:46 +02:00
proddy	ba0f4cd008	3.8.3	2026-08-02 09:56:04 +02:00
proddy	45f7d91b43	Merge remote-tracking branch 'origin/dev'	2026-08-02 09:55:48 +02:00
Proddy	e0f59a4c31	Merge pull request #3176 from proddy/dev pkg update and getting ready for stable	2026-08-01 17:05:18 +02:00
proddy	7eba8acbb4	3.8.3-dev.11	2026-08-01 17:04:13 +02:00
proddy	d0e6a603bb	auto-formatting	2026-08-01 16:57:41 +02:00
proddy	36b4dd55a7	pkg update	2026-08-01 16:44:16 +02:00
proddy	341a4d4e1d	update version	2026-08-01 16:44:11 +02:00
proddy	a61745b710	formatting	2026-08-01 16:44:03 +02:00
proddy	b1ebd81ca2	update	2026-08-01 16:43:55 +02:00
Proddy	1ff53e6ac7	Merge pull request #3171 from MichaelDvP/dev fix water SM100	2026-07-28 19:02:52 +02:00
MichaelDvP	9cab3b480e	chore: update generated files for v3.8.3-dev.10	2026-07-22 15:37:09 +00:00
MichaelDvP	edfbbe68b0	language code "cs"	2026-07-22 17:28:16 +02:00
MichaelDvP	96e8a0d916	fix water module #3164	2026-07-22 17:27:08 +02:00
MichaelDvP	8c90d10601	dump	2026-07-20 15:35:48 +02:00
Proddy	bacd3faac2	Merge pull request #3159 from MichaelDvP/dev dev9	2026-07-15 08:44:31 +02:00
MichaelDvP	2b187fb848	dev8f->dev9	2026-07-14 21:56:41 +02:00
MichaelDvP	4a12066e37	update pkg	2026-07-13 15:08:19 +02:00
MichaelDvP	b82f8c979f	process message from scheduler	2026-07-13 12:32:21 +02:00
MichaelDvP	342878f628	fix standalone	2026-07-12 17:25:51 +02:00
MichaelDvP	4e47be7fa6	Merge remote-tracking branch 'mdvp/dev' into dev	2026-07-12 17:17:42 +02:00
MichaelDvP	2b25ae18d1	set 10 sectimeout for http requests	2026-07-12 17:17:07 +02:00
MichaelDvP	98c9e011bc	chore: update generated files for v3.8.3-dev.8d	2026-07-12 09:16:46 +00:00
MichaelDvP	cb1cb356ce	prevent errorlogs for nonexisting nvs values, version numbering to dev.8d	2026-07-12 11:05:28 +02:00
MichaelDvP	20fc5ede78	changelog	2026-07-12 10:31:51 +02:00
MichaelDvP	a20d1d8970	fix typo	2026-07-12 10:17:02 +02:00
MichaelDvP	a647e16f68	update asyncwebserver, dev.11	2026-07-12 09:57:05 +02:00
MichaelDvP	49ab5e3d72	delay scheduler loop after startup	2026-07-12 09:46:43 +02:00
MichaelDvP	9c905c8bab	donot fetch system_info for reset command	2026-07-12 09:46:18 +02:00
MichaelDvP	7ab343a216	fix crashes from #3146	2026-07-12 08:17:40 +02:00
MichaelDvP	188cc7b666	check for "http" before allocating a http-client	2026-07-11 19:12:34 +02:00
MichaelDvP	193e5d591c	block too many api GET requests	2026-07-11 14:48:19 +02:00
MichaelDvP	ff3f4d3a6d	update pkg	2026-07-11 14:47:39 +02:00
MichaelDvP	5129b475c5	NTP sync enabled by default	2026-07-11 14:47:19 +02:00
MichaelDvP	f31dbd44a5	rollback regex	2026-07-10 12:13:31 +02:00
MichaelDvP	5c55c2216e	rollback regex crashes	2026-07-10 10:41:43 +02:00
MichaelDvP	5a1d06d39e	fix possible memory leaks	2026-07-10 09:33:15 +02:00
MichaelDvP	9443cf3c87	Merge remote-tracking branch 'mdvp/dev' into dev	2026-07-10 08:35:03 +02:00
MichaelDvP	fa31dcdf24	use F7 only for auto mode	2026-07-10 08:33:19 +02:00
MichaelDvP	2c80cc597e	SRC modes from set-telegram	2026-07-10 08:17:53 +02:00
MichaelDvP	d7641fbb2f	use regex for isnum	2026-07-10 08:16:58 +02:00
MichaelDvP	5742c03eee	chore: update generated files for v3.8.3-dev.10	2026-07-09 18:14:31 +00:00
MichaelDvP	b2858ab3e7	Merge remote-tracking branch 'mdvp/dev' into dev	2026-07-09 19:59:37 +02:00
MichaelDvP	2255ad0b17	update modbus	2026-07-09 19:46:45 +02:00
MichaelDvP	ed8adf2617	SRC modes from MenuConfig F7	2026-07-09 19:42:32 +02:00
MichaelDvP	5c2205cf65	calc_dew to helpers	2026-07-09 19:41:54 +02:00
MichaelDvP	f6cb695635	direct call compute	2026-07-09 19:41:13 +02:00
MichaelDvP	1450e79b64	chore: update generated files for v3.8.3-dev.10	2026-07-06 15:24:45 +00:00
MichaelDvP	fae0f9fb49	changelog	2026-07-06 17:12:41 +02:00
MichaelDvP	8638424d5b	fix water circulation for dhw circuits 1/2	2026-07-06 17:00:12 +02:00
MichaelDvP	1d016ec356	formatting, manual set time	2026-07-06 16:55:23 +02:00
MichaelDvP	f16b10f544	fix different timezones	2026-07-06 16:11:14 +02:00
MichaelDvP	dd0c8a5ca8	SRC cooling mode, guess	2026-07-06 10:24:27 +02:00
MichaelDvP	7175191c66	Merge remote-tracking branch 'emsesp/dev' into dev	2026-07-06 08:25:11 +02:00
MichaelDvP	f7a81c50b0	fix standalone, formatting	2026-07-06 08:24:43 +02:00
Proddy	cfbcaa6fce	Merge pull request #3149 from Cali1205/dev update water.cpp: modify set_wwCircTc to use new command values	2026-07-05 22:02:16 +02:00
MichaelDvP	abd1c36ec9	option to sync thermostat clock	2026-07-05 21:20:54 +02:00
Rainer	ebd6d15c48	update water.cpp: modify set_wwCircTc to use new command values	2026-07-05 17:34:20 +02:00
MichaelDvP	f4979d905d	hpminflowtemp telegramoffset depends on control	2026-06-29 21:17:51 +02:00
MichaelDvP	496884c78a	dev.9, changelog	2026-06-29 10:02:58 +02:00
MichaelDvP	696c82364e	fix offset of hpminflowtemp #3144	2026-06-29 10:01:34 +02:00
Proddy	c55655c0c5	Merge pull request #3143 from proddy/dev fix thermostat date/time for HT3	2026-06-28 16:35:39 +02:00
proddy	55a0e4b2b5	Revert "Reduce DeviceValue heap usage with on-demand custom name" This reverts commit `5aadf7234f`.	2026-06-28 16:30:24 +02:00
proddy	eceb097cc7	fix thermostat date/time for HT3	2026-06-28 16:08:31 +02:00
Proddy	0e18645ba5	Merge branch 'emsesp:dev' into dev	2026-06-27 14:32:48 +02:00
Proddy	63f49a347b	Merge pull request #3136 from MichaelDvP/dev fixes for #3127 and #3135	2026-06-27 14:32:04 +02:00
MichaelDvP	943048a920	dev.7	2026-06-27 13:14:57 +02:00
MichaelDvP	2b8a0bd8b7	Merge remote-tracking branch 'emsesp/dev' into dev	2026-06-27 13:06:19 +02:00
MichaelDvP	d83b56a13c	calcutae dewtemp for Easycontrol, #3135	2026-06-27 13:03:10 +02:00
Proddy	1f34a41d27	Merge branch 'emsesp:dev' into dev	2026-06-25 21:14:59 +02:00
Proddy	343ac5880c	Merge pull request #3134 from s-schnitzer/fix-negative-dew-point-calculation fix: negative dew point calculation (emulated RC100H)	2026-06-25 21:05:17 +02:00
s-schnitzer	855edace20	fix: negative dew point calc. (emulated RC100H)	2026-06-25 18:10:52 +02:00
Proddy	aabc4f021c	Merge pull request #3128 from soderdaen/fix-wifi-scan Fix: AP crash and infinite loop during WiFi scan.	2026-06-23 21:01:21 +02:00
MichaelDvP	0aaa566e73	Merge remote-tracking branch 'emsesp/dev' into dev	2026-06-23 08:02:32 +02:00
MichaelDvP	20e3d6a19b	dev.7, fix crash	2026-06-23 07:57:55 +02:00
MichaelDvP	67953fccd6	from PR #3128	2026-06-22 11:59:06 +02:00
MichaelDvP	0c910bc822	fix mock-api	2026-06-22 11:58:05 +02:00
soderdaen	b6a7fb0bf0	Update changelog_latest.md and emsesp_version	2026-06-21 21:15:47 +02:00
MichaelDvP	95f475ab6f	command message calsl compute direct,#3127	2026-06-21 10:53:10 +02:00
soderdaen	f8fa092ac3	Fix: AP crash and infinite loop during WiFi scan.	2026-06-20 10:42:38 +02:00
proddyandCursor	5aadf7234f	Reduce DeviceValue heap usage with on-demand custom name Store the per-entity custom_fullname as a heap-allocated string that is only created when a custom name is actually set, instead of an inline std::string on every DeviceValue. Saves ~20 bytes per entity (hundreds to ~1000 entities), reclaiming internal heap on no-PSRAM boards. Co-authored-by: Cursor <cursoragent@cursor.com>	2026-06-15 19:53:14 +02:00
Proddy	b8a63aeac6	Merge pull request #3125 from proddy/dev remove old S3 binaries #3123	2026-06-15 18:24:46 +02:00
proddy	908a9ebbfc	remove old S3 binaries #3123	2026-06-15 18:23:58 +02:00
Proddy	dbf970d869	Merge branch 'emsesp:dev' into dev	2026-06-07 12:52:09 +02:00
Proddy	9cb2455af2	Merge pull request #3111 from MichaelDvP/dev reset system status	2026-06-07 12:51:51 +02:00
MichaelDvP	f99ca7f013	seltemp write in cooling mode #1781	2026-06-04 12:21:16 +02:00
MichaelDvP	7349bc9ebf	reset system status	2026-06-04 12:20:12 +02:00
MichaelDvP	ccd3a7b223	Merge remote branch “emsesp/dev”	2026-06-04 11:52:53 +02:00
Proddy	33602f65f3	Merge branch 'emsesp:dev' into dev	2026-05-28 20:55:54 +01:00
Proddy	0493f93976	Merge pull request #3101 from MichaelDvP/dev extra handling for 0x470. #3096, fix scheduler onChange name check	2026-05-28 20:55:14 +01:00
MichaelDvP	238c9b7860	fix scheduler onChange	2026-05-28 13:14:14 +02:00
MichaelDvP	0823b7882b	Merge remote branch “mdvp/dev”	2026-05-28 13:12:14 +02:00
MichaelDvP	cf2f816527	chore: update generated files for v3.8.3-dev.5	2026-05-27 09:19:59 +00:00
MichaelDvP	559336a2a7	Merge remote branch “mdvp/dev”	2026-05-27 11:08:35 +02:00
MichaelDvP	0e6cb363ad	0x470 telegram is not hc dependend	2026-05-27 10:52:18 +02:00
MichaelDvP	66b1b1cb24	revert settings for txmode off and 0x0d without ack	2026-05-27 10:49:29 +02:00
MichaelDvP	1d608b7705	chore: update generated files for v3.8.3-dev.4a	2026-05-25 15:11:10 +00:00
MichaelDvP	6dc8072106	FLAG UI800, no poll-ack on id 0x0D	2026-05-25 16:59:41 +02:00
MichaelDvP	88f75038e0	allow txmode 0, show expected crc	2026-05-25 11:12:07 +02:00
MichaelDvP	f5bc3e82bb	formatting	2026-05-25 11:11:30 +02:00
MichaelDvP	c206f069c6	heating/cooling delays, #3096	2026-05-25 11:11:05 +02:00
MichaelDvP	6697aebc3b	Merge remote-tracking branch 'emsesp/dev' into dev	2026-05-25 09:02:41 +02:00
MichaelDvP	3d335dad27	remove trailing comma	2026-05-25 09:00:58 +02:00
Proddy	1ae547a710	Merge branch 'emsesp:dev' into dev	2026-05-19 22:33:59 +02:00
Proddy	20d6966633	Merge pull request #3087 from MichaelDvP/dev fixes for #3084 and #3086	2026-05-19 22:33:44 +02:00
MichaelDvP	d5c96f6d48	changelog	2026-05-19 22:13:30 +02:00
MichaelDvP	d1192e707d	set upload file limit to 1M again	2026-05-19 22:13:14 +02:00
Proddy	70cfbd96e2	Merge branch 'emsesp:dev' into dev	2026-05-19 12:09:53 +02:00
MichaelDvP	0dacd2c71f	don't allocate ariable size on stack	2026-05-18 20:55:57 +02:00
MichaelDvP	3962adc911	Merge remote branch “emsesp/dev”	2026-05-18 08:58:14 +02:00
MichaelDvP	0892738cd9	add KM300 #3084	2026-05-18 07:55:07 +02:00
proddy	b441fd83dd	chore: update generated files for v3.8.3-dev.1	2026-05-14 10:25:29 +00:00
proddy	690cb9df96	chore: update generated files for v3.8.3-dev.1	2026-05-14 10:25:26 +00:00
Proddy	377407f3d1	Merge pull request #3079 from MichaelDvP/dev fixes for #3077	2026-05-14 12:13:44 +02:00
MichaelDvP	6e0530c84c	max limit is uint32	2026-05-14 10:46:32 +02:00
MichaelDvP	59eba07a33	dev.1, changelog, translation	2026-05-13 16:26:07 +02:00
MichaelDvP	5f6d156f63	chore: update generated files for v3.8.3-dev.0	2026-05-13 09:32:00 +00:00
MichaelDvP	07a9bd5f33	fix solar influence, #3077	2026-05-13 11:19:02 +02:00
MichaelDvP	5a8771a8bd	Merge remote branch “emsesp/dev”	2026-05-13 08:52:17 +02:00
Proddy	7cad4b2c8d	Merge pull request #3076 from proddy/dev 3.8.3	2026-05-12 21:29:47 +02:00
proddy	76a68629d1	3.8.3	2026-05-12 21:28:42 +02:00
proddy	27f2cb0693	package update	2026-05-12 21:23:13 +02:00
proddy	2f18bfcce3	fix json OTA upload	2026-05-12 21:23:13 +02:00