pre-release bin & small fixes

CORE changes:

CORE refactored.
Config persistence (saving parameters & config) - now working for Mega, DUE, ESP8266, ESP32.
Config auto-saving to flash on portal changes (http ETAG supported to version control).
HTTP API & tiny web interface (external by CORS)
MDNS controller announcing
Local config changing by web
Delayed commands (/del suffix)
NO_MQTT option
input polling on timer interrupts (DUE)
Device driver changes

PID regulator (13 type)
Relay PWM thermostat (16 type)
RGBWW channel type (17 type) & color temperature set
Legacy modbus (4 type) improvement (retry speedup, mask = 3 & 4 for swap hi & lo bytes)
Multivent driver (18 type)
UART bridge (15 type) (serial protocol interceptor) - wireshark udpdump compatible
Artnet - to DMX configuration (channel range to pass throw)
PWM driver (3 type) - RBGW compatible
Misc

flashing scripts for DUE
Platformio target for OTA (invoke OTA scripts from custom_builds)
Clean-up & optimisation

.gitignore

@@ -19,3 +19,10 @@ custom-build-flags/build_flags_nrf52840
 .vscode/.browse.c_cpp.db
 .vscode/c_cpp_properties.json
 .vscode/launch.json
+lighthub/modules/out_elevator.cpp
+lighthub/modules/out_elevator.h
+lighthub/modules/out_humidifier.cpp
+lighthub/modules/out_humidifier.h
+spare_files/*
+spare_files/ArduinoOTA/*
+lib/*

.idea/markdown-exported-files.xml

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="MarkdownExportedFiles">
-    <htmlFiles />
-    <imageFiles />
-    <otherFiles />
-  </component>
-</project>

.travis.yml

@@ -1,67 +0,0 @@
-# Continuous Integration (CI) is the practice, in software
-# engineering, of merging all developer working copies with a shared mainline
-# several times a day < http://docs.platformio.org/page/ci/index.html >
-#
-# Documentation:
-#
-# * Travis CI Embedded Builds with PlatformIO
-#   < https://docs.travis-ci.com/user/integration/platformio/ >
-#
-# * PlatformIO integration with Travis CI
-#   < http://docs.platformio.org/page/ci/travis.html >
-#
-# * User Guide for `platformio ci` command
-#   < http://docs.platformio.org/page/userguide/cmd_ci.html >
-#
-#
-# Please choice one of the following templates (proposed below) and uncomment
-# it (remove "# " before each line) or use own configuration according to the
-# Travis CI documentation (see above).
-#
-
-
-#
-# Template #1: General project. Test it using existing `platformio.ini`.
-#
-
-# language: python
-# python:
-#     - "2.7"
-#
-# sudo: false
-# cache:
-#     directories:
-#         - "~/.platformio"
-#
-# install:
-#     - pip install -U platformio
-#     - platformio update
-#
-# script:
-#     - platformio run
-
-
-#
-# Template #2: The project is intended to by used as a library with examples
-#
-
-# language: python
-# python:
-#     - "2.7"
-#
-# sudo: false
-# cache:
-#     directories:
-#         - "~/.platformio"
-#
-# env:
-#     - PLATFORMIO_CI_SRC=path/to/test/file.c
-#     - PLATFORMIO_CI_SRC=examples/file.ino
-#     - PLATFORMIO_CI_SRC=path/to/test/directory
-#
-# install:
-#     - pip install -U platformio
-#     - platformio update
-#
-# script:
-#     - platformio ci --lib="." --board=ID_1 --board=ID_2 --board=ID_N

README.md

@@ -1,5 +1,15 @@
 # LightHub
-is Flexible, Arduino-Mega/Arduino DUE/ESP8266/ESP32 open-software and open-hardware SmartHome controller. [RU](https://geektimes.ru/post/295109/) [HOME-site RU](http://lazyhome.ru)
+is Flexible, Arduino-Mega/Arduino DUE/ESP8266/ESP32 open-software and open-hardware SmartHome controller. 
+Useful links:
+
+  * [Article/RU](https://geektimes.ru/post/295109/) 
+
+  * [HOME-site/RU](http://lazyhome.ru)
+
+  * [WIKI/RU](https://www.lazyhome.ru/dokuwiki/doku.php?id=start)
+
+  * [Doxigen autodocumentation for developers](https://anklimov.github.io/lighthub/docs/html/index.html) (litle bit outdated)
+
 It may operate both: 
 * On [especially designed hardware board](http://www.lazyhome.ru/index.php/featurerequest) with 16 optocoupled digital inputs, 16 ESD protected digital/analog Inputs/outputs, 8 open-collector outputs (up to 0.5A/50V), DMX IN/OUT, MODBUS RTU and hardware 1-wire support circuit.
 * On plain Arduino MEGA 2560, Arduino DUE, ESP8266, ESP32 and even on [Controllino](http://controllino.biz/)
@@ -12,7 +22,7 @@ Lighthub allows connecting together:
 * Temperature/Humidity/CO2 sensors: DHT22, CS811, HDC1080 and any type of Modbus connected devices
 * Standard nonexpensive Relay board with TTL inputs, [like this](http://ali.pub/2zlosh) to control AC powered lamps, floor heaters, boilers etc
 * [Standard nonexpensive LED dimmers](http://ali.pub/2zlokp) and [AC DMX-512 dimmers](http://ali.pub/2zlont)
-* Modbus RTU devices (Currently, possible to control two types of Modbus devices: AC Dimmer and Ventilation set (Based on [Vacon 10 controller](http://files.danfoss.com/download/Drives/Vacon-10-Quick-Guide-DPD00714F1-UK.pdf)) and configure polling of virtually any Modbus device. 
+* Modbus RTU devices (Currently, possible to control any type of Modbus devices - e.c dimmers, sensors, wall climate panels, HVAC e.t.c
 * Simple DMX wall sensor panel [like this](http://ali.pub/2zlohe)
 
 [List of non-expensive compatible components from AliExpress here](http://ppv.alipromo.com/custom/promo.php?hash=pjagwaovaero6vkeabjpkpvy4gznbgkc&landing_id=39661)
@@ -43,14 +53,16 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
 
 # Platforms specific details:
 
-**AVR** version (Arduino Mega) is basic, long time in production and have all functions
+**AVR** version (Arduino Mega) is basic, long time in production and have most functions
 * DMX-out is software (DMXSimple) on pin3, can be re-defined to PIN 18 (USART1 TX)
 * DMX-in - hardware
 * WIZNET 5100 and 5500 Ethernets are supported
 * Modbus on USART2
+* Very limited in terms of RAM available
+* OptiBoot bootloader recommended
 
 **SAM3X8E** (Arduino DUE): (Tested. In production. Recomended hardware at current moment)
-* default PWM out frequency
+* Reachest funcionality from all possible options
 * both, DMX-in and DMX-out are hardware USART based. Use USART1 (pins 18 and 19) for DMX-out and DMX-in
 * WIZNET 5100 and 5500 Ethernets are supported
 * Modbus on USART2
@@ -58,7 +70,7 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
 **ESP8266, ESP32**: (Tested)
 * DMX-OUT on USART1 TX
 * DMX-IN - disabled - not possible to deploy in ESP8266
-* Modbus - disabled on ESP8266, Might be configured in future on USART0 instead CLI/DEBUG, on ESP32 binded with UART2
+* Modbus - disabled on ESP8266, Might be configured  on USART0 instead CLI/DEBUG, on ESP32 binded with UART2
 * Uses Wifi interface instead wired connection
 
 **NRF52840** : Still early development stage

build-flags/build_flags_controllino

@@ -2,3 +2,6 @@
 -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:07
 -DWiz5100
 #-DPID_DISABLE
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"

build-flags/build_flags_due

@@ -1,9 +1,19 @@
 #-DW5500_CS_PIN=53
 -DDMX_SMOOTH
 -DSYSLOG_ENABLE
--DMODBUS_DIMMER_PARAM=SERIAL_8E1
+#-DMODBUS_SERIAL_PARAM=SERIAL_8E1
 -DARTNET_ENABLE
 -DOTA
 -DSTATUSLED
 #-DPID_DISABLE
+#-DUARTBRIDGE_ENABLE
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+-DMCP23017
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-DTIMER_INT
 
+-DRESTART_LAN_ON_MQTT_ERRORS
+-DOTA_PORT=80
+-DMERCURY_ENABLE

build-flags/build_flags_due-5100

@@ -1,6 +0,0 @@
--DARTNET_ENABLE
--DDMX_SMOOTH
--DSTATUSLED
--DSYSLOG_ENABLE
--DWiz5100
-#-DPID_DISABLE

build-flags/build_flags_due-5500

@@ -1,6 +0,0 @@
--DWiz5500
--DARTNET_ENABLE
--DDMX_SMOOTH
--DSTATUSLED
--DSYSLOG_ENABLE
-#-DPID_DISABLE

build-flags/build_flags_esp32-wifi

@@ -5,12 +5,56 @@
 #-DAC_DISABLE
 -DMODBUS_DISABLE
 #-DMBUS_DISABLE
--DCOUNTER_DISABLE
-#-DSYSLOG_ENABLE - udp errors
+#-DCOUNTER_DISABLE
+-DSYSLOG_ENABLE
+# - udp errors
 -DOTA
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE 
+#- ArduinoMDNS didnt working
+
 -DMCP23017
 -DMODBUS_TX_PIN=13
 #-DARTNET_ENABLE - udp rx errors ((
 #-DUSE_1W_PIN=16
 #-DW5500_CS_PIN=15
 #-DPID_DISABLE
+
+#Define pins for modbus UART Serial1. Default - 9/10 is utilized by ESP flash 
+#-DMODBUS_UART_RX_PIN=15
+#-DMODBUS_UART_TX_PIN=2
+#-DmodbusSerial=Serial1
+#-DMODBUS_DEBUG
+
+#-DMODBUS_UART_RX_PIN=16
+#-DMODBUS_UART_TX_PIN=17
+#-DmodbusSerial=Serial2
+
+# Use default pins for modbus UART
+#-DMODBUS_UART_RX_PIN=-1
+#-DMODBUS_UART_TX_PIN=-1
+
+# Example of UARTBRIDGE configuration
+#-DUARTBRIDGE_ENABLE
+#-DMODULE_UATRBRIDGE_UARTA=Serial1
+#-DMODULE_UATRBRIDGE_UARTA_RX_PIN=15
+#-DMODULE_UATRBRIDGE_UARTA_TX_PIN=2
+
+#-DMODULE_UATRBRIDGE_UARTB=Serial2
+#-DMODULE_UATRBRIDGE_UARTB_RX_PIN=-1
+#-DMODULE_UATRBRIDGE_UARTB_TX_PIN=-1
+
+#-DAUTOCONNECT_RECONNECT_WAITTIME=60
+
+-DFS_STORAGE
+-DFS_PREPARE
+
+-DRESTART_LAN_ON_MQTT_ERRORS
+#-D CORS=\"http://lazyhome.ru\"
+-DOTA_PORT=80
+
+-DMQTT_KEEPALIVE=10 
+-DMQTT_SOCKET_TIMEOUT=20
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+#-DMERCURY_ENABLE

build-flags/build_flags_esp8266-wifi

@@ -7,4 +7,40 @@
 -DARTNET_ENABLE
 -DUSE_1W_PIN=16
 -DW5500_CS_PIN=15
-#-DPID_DISABLE
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+-DWM_MDNS
+-DMCP23017
+
+-DFS_STORAGE
+-DFS_PREPARE
+
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-DOTA_PORT=80
+
+#oct22 - violation in Publish/OnMQTTConnect while publish homie info
+-DNO_HOMIE
+
+#options to fit firmware to Sonoff-S26 (uncomment it)
+
+##Disabling debug log and move I2C to 1-3 pins
+#-DnoSerial
+#-D TWI_SCL=1
+#-D TWI_SDA=3
+##Slimming firmware to fit 50% of 1m flash
+-DDMX_DISABLE
+-UDARTNET_ENABLE
+-DMODBUS_DISABLE
+-DMBUS_DISABLE
+-DOWIRE_DISABLE
+-DCOUNTER_DISABLE
+-DAC_DISABLE
+-DMOTOR_DISABLE
+-DMULTIVENT_DISABLE
+-DHSV_DISABLE
+-UMCP23017
+-D BEARSSL_SSL_BASIC
+-D SPILED_DISABLE 
+-D PWM_DISABLE

build-flags/build_flags_lighthub21

@@ -1,11 +1,42 @@
 -DW5500_CS_PIN=53
 -DARTNET_ENABLE
 -DDMX_SMOOTH
--DMODBUS_DIMMER_PARAM=SERIAL_8E1
 -DMODBUS_SERIAL_BAUD=9600
 -DOTA
 -DSYSLOG_ENABLE
-#-DWiz5500
 -DSTATUSLED
 -DMCP23017
 #-DPID_DISABLE
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+-DTIMER_INT
+#-DFLASH_OFFSET=-256
+
+# default MODBUS Serial parameters for LEGACY Modbus  and MODBUS over IP
+#-DMODBUS_SERIAL_PARAM=SERIAL_8E1
+
+#Set Logariphmic law for DMX channels bright 
+-DBRIGHT_LOG
+
+#disable HOMIE topics publishing
+-DNO_HOMIE
+
+#Put modbus exchange in debug hex dump 
+#-DMODBUS_DEBUG
+
+#Uncomment next 3 lines  (or add it to custom build flags) to use Native USB port for debug/CLI instead Serial
+#-DdebugSerialPort=SerialUSB
+#-DSerialPortType=Serial_
+#-DSERIAL_BAUD=0
+
+#Default SerialDebug settings
+#-DSERIAL_BAUD=115200
+#-DdebugSerialPort=Serial
+
+-DRESTART_LAN_ON_MQTT_ERRORS
+#-D CORS=\"http://lazyhome.ru\"
+-DOTA_PORT=80
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-D MERCURY_ENABLE
+#-D IPMODBUS

build-flags/build_flags_m5stack

@@ -10,3 +10,15 @@
 #-DSYSLOG_ENABLE
 -DUSE_1W_PIN=16
 #-DPID_DISABLE
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+-DMCP23017
+
+-DFS_STORAGE
+-DFS_PREPARE
+
+-DOTA
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-DOTA_PORT=80

build-flags/build_flags_mega2560-5100

@@ -1,5 +1,12 @@
--DMODBUS_DIMMER_PARAM=SERIAL_8E1
+#-DMODBUS_SERIAL_PARAM=SERIAL_8E1
 -DAVR_DMXOUT_PIN=18
 -DSYSLOG_ENABLE
 -DWiz5100
 #-DPID_DISABLE
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-DOTA_PORT=80

build-flags/build_flags_mega2560-5500

@@ -1,5 +1,18 @@
 -DWiz5500
--DMODBUS_DIMMER_PARAM=SERIAL_8E1
+#-DMODBUS_SERIAL_PARAM=SERIAL_8E1
 -DAVR_DMXOUT_PIN=18
 -DSYSLOG_ENABLE
-#-DPID_DISABLE
+#-DPID_DISABLE
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+
+
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-DOTA_PORT=80

build-flags/build_flags_mega2560-optiboot

@@ -0,0 +1,30 @@
+
+#-DMODBUS_SERIAL_PARAM=SERIAL_8E1
+#-DAVR_DMXOUT_PIN=18
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DMBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+#-DAC_DISABLE
+-DSYSLOG_ENABLE
+-DPID_DISABLE
+-DOTA
+-DMOTOR_DISABLE
+-DMULTIVENT_DISABLE
+#-DWiz5100
+-DARDUINO_OTA_MDNS_DISABLE
+-DMDNS_ENABLE
+
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+
+# Example of UARTBRIDGE configuration
+#-DUARTBRIDGE_ENABLE
+-DOTA_PORT=80
+#-DMERCURY_ENABLE

build-flags/build_flags_mega2560slim-5100

@@ -1,15 +1,30 @@
 
-#-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+#-DMODBUS_SERIAL_PARAM=SERIAL_8E1
 #-DAVR_DMXOUT_PIN=18
 -DDMX_DISABLE
 -DMODBUS_DISABLE
-#-DMBUS_DISABLE
+-DMBUS_DISABLE
 #-DOWIRE_DISABLE
 -DDHT_DISABLE
--DCOUNTER_DISABLE
+#-DCOUNTER_DISABLE
 -DNO_HOMIE
 -DCSSHDC_DISABLE
 -DSPILED_DISABLE
 -DAC_DISABLE
 -DSYSLOG_ENABLE
 -DPID_DISABLE
+-DWiz5100
+-DMOTOR_DISABLE
+-DOTA
+-DARDUINO_OTA_MDNS_DISABLE
+#-DMDNS_ENABLE
+-DRESTART_LAN_ON_MQTT_ERRORS
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+-DOTA_PORT=80
+-DHSV_DISABLE
+-DMULTIVENT_DISABLE
+-DPID_DISABLE
+-DPWM_DISABLE
+-DSPILED_DISABLE
+-DOW_DEVICES_LIMIT=17

build-flags/build_flags_nrf52840

@@ -1,4 +1,4 @@
--DWiz5500
+#-DWiz5500
 #-DW5500_CS_PIN=10
 -DDMX_DISABLE
 -DMODBUS_DISABLE
@@ -12,3 +12,8 @@
 -DSYSLOG_ENABLE
 -DMBUS_DISABLE
 -DPID_DISABLE
+#-DMCP23017
+
+-D CORS=\"*\"
+-D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
+#-DMERCURY_ENABLE

build-flags/build_flags_stm32

@@ -0,0 +1,40 @@
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DMBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DPID_DISABLE
+
+-DENABLE_HWSERIAL1
+-DdebugSerialPort=Serial1
+
+#-DFLASH_BASE_ADDRESS
+#-DFLASH_DATA_SECTOR 
+#-DFLASH_PAGE_NUMBER 
+
+-D PIO_FRAMEWORK_ARDUINO_ENABLE_MASS_STORAGE
+-D PIO_FRAMEWORK_ARDUINO_ENABLE_CDC_AND_MSC
+
+#-DdebugSerialPort=SerialUSB
+#-DSerialPortType=USBSerial
+#-DSERIAL_BAUD=0
+
+#-DPIO_FRAMEWORK_ARDUINO_ENABLE_CDC
+#-DUSBCON
+#-DUSBD_VID=0x0483
+#-DUSBD_PID=0x5740
+#-DUSB_MANUFACTURER="Unknown"
+#-DUSB_PRODUCT="\"BLUEPILL_F103C8\""
+#-DHAL_PCD_MODULE_ENABLED
+#-D USBD_USE_CDC
+
+-D HAL_CAN_MODULE_ENABLED
+#HAL_ETH_MODULE_DISABLED
+#HAL_SD_MODULE_DISABLED
+#HAL_DAC_MODULE_DISABLED
+#-DMERCURY_ENABLE

build-flags/build_flags_stm32-enc2860

@@ -9,3 +9,4 @@
 -DSPILED_DISABLE
 -DAC_DISABLE
 -DPID_DISABLE
+-DUIPETHERNET

compiled/DUE_16u2_reflash/reflash16u2DUE.bat

@@ -0,0 +1,16 @@
+REM fetch DeviceID of Arduino Port from WMI Service
+FOR /f "tokens=* skip=1" %%a IN ('wmic PATH Win32_SerialPort Where "Caption LIKE '%%Arduino Uno%%'" get DeviceID') DO (
+    SET COMX=%%a
+    GOTO exit1
+)
+
+REM Arduino Due Programming Port not exist
+GOTO error_comport
+
+:exit1
+
+REM remove blank
+SET COMPORT=%COMX: =%
+
+
+..\tools\win\tool-avrdude\avrdude -C ..\tools\win\tool-avrdude\avrdude.conf -c arduino -P %COMPORT% -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i

compiled/Mega2560-optiboot/mega2560-optiboot/config.json

@@ -0,0 +1,46 @@
+{
+  "syslog":["192.168.88.2"],
+  "mqtt":["elev","192.168.88.22"],
+  "dmx":[30],
+  "items": {
+    "relay1":[6,32],
+    "relay2":[6,33],
+    "relays":[7,["relay1","relay2"]],
+    "sensair1":[44,[254,
+                  "sensair",
+                  {"co2":{"emit":"co2"}},
+                  {"mode":"auto"}
+                  ]
+              ],
+    "elevator":[15,{"baud":9600,"serial":"8N1"]       
+    },
+   "modbus":
+   {
+   "sensair":{"baud":9600,
+             "poll":{"irs":[[0,3],21,[25,30]],"regs":[0,1,31],"delay":1000},
+             "par":{
+                            "co2":{"ir":3},
+                            "meterStat":{"ir":0},
+                            "alarmStat":{"ir":1},
+                            "outStat":{"ir":0},
+                            "pwm":{"ir":21},
+                            "typeid":{"ir":25,"type":"u32"},
+                            "mapver":{"ir":27},
+                            "fwver":{"ir":28},
+                            "sensorid":{"ir":29,"type":"u32"},
+                            "ack":{"reg":0},
+                            "command":{"reg":1},
+                            "abc":{"reg":31}
+                            
+                            
+             }
+          
+    }
+   },
+  
+"in":{    "23":{"item":"relays","emit":"in1"},
+          "25":{"item":"relays","emit":"in2"},
+          "27":{"item":"relays","emit":"in3"},
+          "29":{"item":"relays","emit":"in4"}
+         }
+}

compiled/Mega2560-optiboot/mega2560-optiboot/getCNF.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -d -address 192.168.88.70 -port 65280 -username arduino -password password  -b  /config

compiled/Mega2560-optiboot/mega2560-optiboot/uploadCNF.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address elev.local -port 65280 -username arduino -password password -sketch config.json -b -upload /config.json

compiled/Mega2560-optiboot/mega2560-optiboot/uploadOTA.bat

@@ -1 +1 @@
-..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
+..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/Mega2560-optiboot/mega2560-optiboot/uploadOTA.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.11.213 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/Mega2560-optiboot/optiboot.hex

@@ -0,0 +1,61 @@
+:020000023000CC
+:10FC000002C0EFC037C1112484B7882369F0982F50
+:10FC10009A70923049F081FF02C097EF94BF282E6E
+:10FC200080E002D10C94000085E08093810082E0A6
+:10FC30008093C00088E18093C1008CE08093C40071
+:10FC400086E08093C2008EE0EFD0279A84E023EC18
+:10FC50003FEF91E0309385002093840096BBB09BEA
+:10FC6000FECF1F9AA8954091C00047FD02C0815069
+:10FC700089F7CED0813479F4CBD0C82FDBD0C2380D
+:10FC800011F480E004C088E0C13809F083E0B9D005
+:10FC900080E1B7D0EECF823419F484E1D3D0F8CF2D
+:10FCA000853411F485E0FACF853581F4B1D0E82EA2
+:10FCB000AFD0F82E87FF07C08BB781608BBFEE0CEB
+:10FCC000FF1CB8D0E5CF8BB78E7FF8CF863579F49F
+:10FCD0009FD08D3451F49CD0CBB79AD0C170880F8F
+:10FCE0008C2B8BBF81E0AED0CCCF83E0FCCF8436B1
+:10FCF00009F046C08DD0C82FD0E0DC2FCC2788D0AB
+:10FD0000C82B86D0D82E5E018EEFB81A00E012E024
+:10FD10004801EFEF8E1A9E0A7BD0F80180838401A0
+:10FD20008A149B04A9F786D0F5E410E000E0DF1602
+:10FD300009F150E040E063E0C70153D08701C12CD6
+:10FD400092E0D92EF601419151916F0161E0C80115
+:10FD500048D00E5F1F4F2297A9F750E040E065E0C2
+:10FD6000C7013FD095CF6081C8018E0D9F1D01D185
+:10FD70000F5F1F4FF801FE5FC017D107A1F788CFB3
+:10FD8000843701F545D0C82FD0E0DC2FCC2740D0F8
+:10FD9000C82B3ED0D82E4ED08701F5E4DF120BC021
+:10FDA000CE0DDF1DC801DDD02CD00F5F1F4FC01757
+:10FDB000D107C1F76DCFF80187918F0122D021972C
+:10FDC000D1F766CF853739F435D08EE11AD088E97E
+:10FDD00018D081E05CCF813509F073CF88E024D062
+:10FDE00070CFFC010A0167BFE895112407B600FC3B
+:10FDF000FDCF667029F0452B19F481E187BFE895A6
+:10FE000008959091C00095FFFCCF8093C60008959F
+:10FE10008091C00087FFFCCF8091C00084FD01C0AD
+:10FE2000A8958091C6000895E0E6F0E098E19083FF
+:10FE300080830895EDDF803219F088E0F5DFFFCF91
+:10FE400084E1DFCFCF93C82FE3DFC150E9F7CF9133
+:10FE5000F1CFCF92DF92EF92FF92DC01CB01642FC2
+:10FE60006D01EE24FF24CBBEA901FF90EF90DF903F
+:10FE7000CF90B7CF2F923F924F925F926F927F9227
+:10FE80008F929F92AF92BF92CF92DF92EF92FF92AA
+:10FE90000F931F93CF93DF9300D0CDB7DEB7180138
+:10FEA000E9826B017C0110E000E029013A014C1865
+:10FEB0005D086E087F0846015701840C951CA61C3E
+:10FEC000B71C0215130531F489818823A1F188E05C
+:10FED000ABDFFFCF30E020E043E0C701B601B9DF80
+:10FEE00080E890E09B838A83ABBEF4012791369132
+:10FEF000C501B401641975098609970941E0A9DFB4
+:10FF00008A819B8101979B838A8392E0890E911C51
+:10FF1000A11CB11C8A819B81892B31F730E020E044
+:10FF200045E0C701B60195DF9FEFD91AE90AF90A42
+:10FF30000F5F1F4FC0CF0F900F900F90DF91CF91A9
+:10FF40001F910F91FF90EF90DF90CF90BF90AF90F7
+:10FF50009F908F907F906F905F904F903F902F90E9
+:10FF60000895F999FECF92BD81BDF89A992780B581
+:10FF70000895262FF999FECF1FBA92BD81BD20BDED
+:0EFF80000FB6F894FA9AF99A0FBE01960895FA
+:02FFFE000008F9
+:040000033000FC00CD
+:00000001FF

compiled/Mega2560-optiboot/upload.bat

@@ -0,0 +1 @@
+..\tools\win\tool-avrdude\avrdude -C ../tools/mac/tool-avrdude/avrdude.conf  -v -V -P com8 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/Mega2560-optiboot/uploadOTA.bat

@@ -0,0 +1 @@
+..\tools\arduinoOTA.exe -address 192.168.11.213 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/check_bin.sh

@@ -0,0 +1,15 @@
+diff ../.pio/build/due/firmware.bin due
+diff ../.pio/build/controllino/firmware.hex controllino
+diff ../.pio/build/m5stack/firmware.bin m5stack
+diff ../.pio/build/mega2560slim-5100/firmware.hex mega2560slim-5100
+diff ../.pio/build/mega2560slim-5100/firmware.bin mega2560slim-5100
+diff ../.pio/build/mega2560-optiboot/firmware.hex mega2560-optiboot
+diff ../.pio/build/mega2560-optiboot/firmware.bin mega2560-optiboot
+diff ../.pio/build/mega2560-5100/firmware.hex mega2560-5100
+diff ../.pio/build/nrf52840/firmware.hex nrf52840-5500
+diff ../.pio/build/esp32-wifi/firmware.bin esp32-wifi
+diff ../.pio/build/stm32-enc2860/firmware.bin stm32-enc2860
+diff ../.pio/build/esp8266-wifi/firmware.bin esp8266-wifi
+diff ../.pio/build/lighthub21/firmware.bin lighthub21
+diff ../.pio/build/mega2560-5500/firmware.hex mega2560-5500
+diff ../.pio/build/stm32/firmware.* stm32

compiled/due-5100/upload.sh

@@ -1,3 +0,0 @@
-export PORT=cu.usbmodem1451
-echo . |  stty -f /dev/$PORT speed 1200
-../tools/mac/tool-bossac/bossac -U false -p $PORT -i -e -w -v -b firmware.bin -R 

compiled/due-5500/upload.bat

@@ -1,3 +0,0 @@
-mode com3:1200,n,8,1
-pause
-..\tools\win\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b firmware.bin -R 

compiled/due-5500/uploadOTA.sh

@@ -1 +0,0 @@
-../tools/mac/arduinoOTA -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/due/sendcommand.sh

@@ -0,0 +1,2 @@
+#../tools/mac/arduinoOTA -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
+curl --basic --user arduino:password --data-ascii "$2" --url http://192.168.88.21:65280/command/$1

compiled/due/upload.bat

@@ -1,3 +1,90 @@
-mode com3:1200,n,8,1
-pause
-C:\Users\Akmal\.platformio\packages\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b C:\Users\Akmal\ownCloud\compiled\due\Wiz5500\firmware.bin -R 
+@ECHO off
+
+REM Wait X second for memory on Arduino Due is erased.
+SET WAIT_ERASED=4
+
+ECHO ------ External tool BossacArduinoDue started ------
+
+REM number of command line arguments ok?
+REM IF [%1]==[] GOTO error_args
+REM IF [%2]==[] GOTO error_args
+
+REM set command line arguments
+SET BOSSACPATH=..\tools\win\tool-bossac\bossac.exe
+SET BINFILE=firmware.bin
+
+REM parse command line arguments
+SET BOSSACPATH=%BOSSACPATH:"=%
+SET BINFILE=%BINFILE:"=%
+
+REM workeround for bug in Atmel Studio 6.0.1996 Service Pack 2
+SET BINFILE=%BINFILE:\\=\%
+SET BINFILE=%BINFILE:.cproj=%
+
+REM bossac path exist?
+IF NOT EXIST "%BOSSACPATH%" GOTO error_arg1
+
+REM bin file exist?
+IF NOT EXIST "%BINFILE%" GOTO error_binfile
+
+REM fetch DeviceID of Arduino Due Programming Port from WMI Service
+FOR /f "tokens=* skip=1" %%a IN ('wmic PATH Win32_SerialPort Where "Caption LIKE '%%USB%%'" get DeviceID') DO (
+    SET COMX=%%a
+    GOTO exit1
+)
+
+REM Arduino Due Programming Port not exist
+GOTO error_comport
+
+:exit1
+
+REM remove blank
+SET COMPORT=%COMX: =%
+
+REM report in Atmel Studio 6.0 IDE output window
+ECHO BossacPath=%BOSSACPATH%
+ECHO BinFile=%BINFILE%
+ECHO Arduino Due Programming Port is detected as %COMPORT%.
+
+REM The bossac bootloader only runs if the memory on Arduino Due is erased.
+REM The Arduino IDE does this by opening and closing the COM port at 1200 baud.
+REM This causes the Due to execute a soft erase command.
+ECHO Forcing reset using 1200bps open/close on port 
+ECHO MODE %COMPORT%:1200,N,8,1
+MODE %COMPORT%:1200,N,8,1
+
+REM Wait X second for memory on Arduino Due is erased.
+ECHO Wait for memory on Arduino Due is erased...
+PING -n %WAIT_ERASED% 127.0.0.1>NUL
+
+REM Execute bossac.exe
+ECHO Execute bossac with command line:
+ECHO "%BOSSACPATH%" -i -d --port=%COMPORT% -U false -e -w -v -b "%BINFILE%" -R
+START /WAIT "" "%BOSSACPATH%" -i  --port=%COMPORT% -U false -e -w -v -b "%BINFILE%" -R
+
+GOTO end
+
+:error_args
+ECHO Error: wrong number of command line arguments passed!
+GOTO end
+
+:error_arg1
+ECHO Error: command line argument 1 - path to bossac.exe not exist! - "C:\Program Files (x86)\arduino-1.5.2\hardware\tools\bossac.exe"
+ECHO Error: command line argument 1 - argument passed = %1
+GOTO end
+
+:error_arg2
+ECHO Error: command line argument 2 - path to bin file not exist! - use $(OutputDirectory)\$(OutputFileName).bin
+ECHO Error: command line argument 2 - argument passed = %1
+GOTO end
+
+:error_binfile
+ECHO Error: bin file "%BINFILE%" not exist!
+GOTO end
+
+:error_comport
+ECHO Error: Arduino Due Programming Port not found!
+
+:end
+
+ECHO ======================== Done ========================

compiled/due/upload999.bat

@@ -1,3 +0,0 @@
-mode com3:1200,n,8,1
-pause
-C:\Users\Akmal\.platformio\packages\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b C:\Users\Akmal\ownCloud\compiled\due\Wiz5500\firmware999.bin -R 

compiled/due/uploadOTA.bat

@@ -1,5 +1 @@
-<<<<<<< HEAD
-..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
-=======
 ..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
->>>>>>> 9b164a1dfc40ee0e8f29dbedff4f3954edf55d76

compiled/due/uploadOTA.sh

@@ -1 +1 @@
-../tools/mac/arduinoOTA -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
+../tools/mac/arduinoOTA -address 192.168.88.21 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/esp32-wifi/data/config.json

@@ -0,0 +1,62 @@
+{
+  "syslog":["192.168.88.2"],
+  "mqtt1":["esp32","m2m.eclipse.org"],
+  "mqtt":["elevator","192.168.88.2"],
+  "mqtt4":["esp32","test.mosquitto.org"],
+  "dmx":[30],
+  "items": {
+    "relay1":[6,32],
+    "relay2":[6,33],
+    "relays":[7,["relay1","relay2"]],
+    "sensair1":[44,[254,
+                  "sensair",
+                  {"co2":{"emit":"co2"}},
+                  {"mode":"auto"}
+                  ]
+              ],
+    "elevator":[15,{"baud":9600,"serial":"8N1","ip":"192.168.88.255","port":502}],          
+              
+    "aaa1":[44,[254,
+                  "aaa",
+                  {"aaa1":{"emit":"aaa2"}},
+                  {"mode":"auto"}
+                  ]
+              ]
+    },
+   "modbus":
+   {
+   "aaa":
+              {"baud":19200,
+               "poll":{"irs":[1]},
+                "par":{
+                  "aaa1":{"ir":1}
+                }
+                
+              },
+   "sensair":{"baud":9600,
+             "poll":{"irs":[[0,3],21,[25,30]],"regs":[0,1,31],"delay":1000},
+             "par":{
+                            "co2":{"ir":3},
+                            "meterStat":{"ir":0},
+                            "alarmStat":{"ir":1},
+                            "outStat":{"ir":0},
+                            "pwm":{"ir":21},
+                            "typeid":{"ir":25,"type":"u32"},
+                            "mapver":{"ir":27},
+                            "fwver":{"ir":28},
+                            "sensorid":{"ir":29,"type":"u32"},
+                            "ack":{"reg":0},
+                            "command":{"reg":1},
+                            "abc":{"reg":31}
+                            
+                            
+             }
+          
+    }
+   },
+  
+"in":{    "34":{"item":"relays","emit":"myhome/in/bedr","scmd":"TOGGLE","rcmd":""},
+
+          "17":{"T":64,"emit":"analog","map":[0,1024,0,100,15]}
+         }
+}

compiled/esp32-wifi/uploadCFG.sh

@@ -0,0 +1,2 @@
+~/.platformio/packages/tool-mkspiffs/mkspiffs_espressif32_arduino -s 20480 -c data data.bin
+../tools/mac/arduinoOTA -v -address 192.168.88.50 -port 80 -username arduino -password password -sketch data.bin  -upload /data -b

compiled/esp32-wifi/uploadCounter.sh

@@ -1 +0,0 @@
-../tools/mac/arduinoOTA -address 192.168.8.58 -port 65280 -username arduino -password password -sketch StartCounter.ino.bin -b -upload /sketch

compiled/esp32-wifi/uploadOTA.sh

@@ -1 +1 @@
-../tools/mac/arduinoOTA -address 192.168.88.45 -port 65280 -username arduino -password password -sketch firmware.bin  -upload /sketch -b
+../tools/mac/arduinoOTA -v -address 192.168.11.207 -port 80 -username arduino -password password -sketch firmware.bin  -upload /sketch -b

compiled/esp8266-wifi/esp12-noserial/options.txt

@@ -0,0 +1,31 @@
+Компактная сборка с набором опций, умещающаяся в 50 процентов flash ESP12
+CLI и отладочная информация на serial0 отключена для возможности использования PIN0-1
+
+(-)MULTIVENT
+(+)PWM_RELAY
+(+)MDNS
+(-)UARTBRIDGE
+(+)SYSLOG
+(+)PID
+(-)MCP23017
+(-)ARTNET
+(+)OTA
+(-)SPI LED
+(-)MOTOR CTR
+(+)AC HAIER 
+(+)CCS811 & HDC1080
+(+)RESTART_LAN_ON_MQTT_ERRORS
+(-)HARDRESET, using soft
+(-)COUNTER
+(+)DHT
+(-)OWIRE
+(-)IPMODBUS
+(-)MODBUS
+(-)DMX
+(+)WiFi
+(+)FreeRam printing
+(+)WATCHDOG
+
+Config server:lazyhome.ru
+201703L C++ 
+version:e9355ef_2023-10-31

compiled/esp8266-wifi/full/options.txt

@@ -0,0 +1,32 @@
+Полная версия прошивки
+
+(+)MULTIVENT
+(+)PWM_RELAY
+(+)MDNS
+(-)UARTBRIDGE
+(+)SYSLOG
+(+)PID
+(+)MCP23017
+(+)ARTNET
+(+)OTA
+(+)SPI LED
+(+)MOTOR CTR
+(+)AC HAIER 
+(+)CCS811 & HDC1080
+(+)RESTART_LAN_ON_MQTT_ERRORS
+(-)HARDRESET, using soft
+(+)COUNTER
+(+)DHT
+(-)DS2482-100 USE_1W_PIN
+(+)OWIRE
+(-)IPMODBUS
+(+)MODBUS SERIAL_8N1 at Serial1 speed:9600
+(+)ADAFRUIT LED
+(+)DMX
+(+)WiFi
+(+)FreeRam printing
+(+)WATCHDOG
+
+lazyhome.ru
+Config server:
+201703L C++ version:e9355ef_2023-10-31

compiled/esp8266-wifi/full/ota.sh

@@ -0,0 +1 @@
+../../tools/mac/arduinoOTA -address 192.168.11.208 -port 80 -username arduino -password password -b -upload /sketch -sketch firmware.bin 

compiled/esp8266-wifi/ota.bat

@@ -0,0 +1 @@
+arduinoOTA -address 192.168.11.208 -port 80 -username arduino -password password -b -upload /sketch -sketch firmware.bin 

compiled/esp8266-wifi/ota.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.11.208 -port 80 -username arduino -password password -b -upload /sketch -sketch firmware.bin 

compiled/lighthub21/ListSerialPorts.bat

@@ -0,0 +1 @@
+wmic PATH Win32_SerialPort  get DeviceID

compiled/lighthub21/data/config.json

@@ -0,0 +1,215 @@
+{
+  "dmx":[3,60],
+  "syslog":["192.168.88.2"],
+  "dmxin":["led5","led6","led7","led8"],
+  "topics":{"root":"lazyhome.ru"},
+  "mqtt":["lazyhome.ru-939a","192.168.88.3"], 
+  "modbus":
+  {
+    "airset":{
+              "baud":9600,
+              "serial":"8E1",
+              "poll":{"regs":[[0,38],[1000,1008]],"delay":100000},
+              "par":{ 
+                            "uheat":{"reg":0,"type":"u16"},
+                            "umot":{"reg":2,"type":"u16"},
+                            "amode":{"reg":3,"type":"u8","map":{}},
+                            "onoff":{"reg":1000},
+                            "fsauto":{"reg":1001},
+                            "pmode":{"reg":1002},
+                            "set":{"reg":1003},
+                            "frcautoff":{"reg":1007},
+                            "fault":{"reg":1008},
+                
+                            "t_heat":{"reg":8,"map":[0,1024,0,1024],"type":"i16"},
+                            "mode":{"reg":24}
+                  
+              }
+              },
+    "dim4":{"serial":"8N1",
+             "poll":{"regs":[[0,4]],"delay":100000},
+             "par":{
+                            "ch1":{"reg":0,"map":[]},
+                            "ch2":{"reg":1,"map":[]},
+                            "ch3":{"reg":2,"map":[]},
+                            "ch4":{"reg":3,"map":[]}
+             }
+            },
+    "panel":{
+            "serial":"8E1",
+            "poll":{"regs":[[40000,40014],[30000,30002]],"delay":10000},
+             "par":{
+                            "fan"  :{"reg":40000,"map":[1,[0,7,0,100]],"id":1},
+                            "mode" :{"reg":40001,"mapcmd":[2,[[1,"FAN_ONLY"],[2,"HEAT"],[4,"COOL"],[8,"AUTO"]]]},
+                            "set"  :{"reg":40002,"id":2},
+                            "pwr"  :{"reg":40003,"mapcmd":[2,[[0,2],[1,1]]]},
+                            "alm01":{"reg":40004},
+                            "alm17":{"reg":40005},
+                            "alm33":{"reg":40006},
+                            "sethum" :{"reg":40007,"id":3},
+                            "setvoc" :{"reg":40008,"id":4},
+                            
+                            "temp" :{"reg":30000,"map":[1,[-1000,1000,-100.0,100.0]],"type":"x10"},
+                            "hum"  :{"reg":30001},
+                            "voc"  :{"reg":30002},
+                            
+                            "ch_temp"  :{"reg":40009,"type":"x10","id":5},
+                            "ext_temp" :{"reg":40010,"type":"x10","id":6},
+                            "out_temp" :{"reg":40011,"type":"x10","id":7},
+                            "water_temp" :{"reg":40012,"type":"x10","id":8},
+                            "ch_hum"  :{"reg":40013},
+                            "heat_pwr":{"reg":40014}
+             }   
+    }
+  },
+  
+  "ow":{
+                 "2861641227C1EFED":[{"emit":"t_1","item":"pid0/val"},{"emit":"pid_t"}]
+        },
+  "items": {
+    "dimer1":[44,[1,
+                  "dim4",
+                  {"ch1":{"emit":"aaa1"},"ch2":{"emit":"aaa2"},"ch3":{"emit":"aaa3"}},
+                  {"mode":"auto"}
+                  ]
+              ],
+              
+    "p_bedr":[44,[2,"panel",
+              {
+                "fan" :{"sa":10, "act":
+                            [
+                            {"emit":"edem/ac/bedr/fan"},
+                            {"emit":"edem/vent/bedr/fan"}
+                            ]
+                        },
+                            
+                "mode":{"sa":11,"emit":"edem/ac/bedr/mode"},
+                "pwr" :{"sa":12,"emit":"edem/ac/bedr/pwr"},
+                
+                "sethum":{"emit":"edem/vent/hum_bedr/set","item":"thermostat/set"},
+                "hum"   :{"emit":"edem/vent/hum_bedr/val"},
+                
+                "setvoc":{"emit":"edem/vent/bedr/set","item":"lled/sat"},
+                "voc"   :{"emit":"edem/vent/bedr/val"},
+                
+                "set"   :{"sa":13, "act":
+                            [
+                              {"emit":"edem/fl2/term_bedr/set"},
+                              {"emit":"edem/ac/bedr/set","item":"pid0/set"}
+                            ]
+                          },
+                "temp"  :{"emit":"edem/fl2/term_bedr/1/val"},
+                "ch_temp":{"sa":14},
+                "ch_hum":{"sa":15},
+                "ext_temp":{"sa":16},
+                "out_temp":{"sa":17},
+                "water_temp":{"sa":18},
+                "heat_pwr":{"sa":19},
+                "cmd":{"sa":2,"reg":"mode","on":1,"off":0}
+              }  
+              ]],
+    "airset1":[44,[247,"airset"]],
+    "mbusdim1":[44,[1,0,3,100]],
+    "mbusdim2":[44,[1,1,3,100]],
+    "mbusdim3":[44,[1,2,3,100]],
+    "mbusdim4":[44,[1,3,3,100]],
+                "relay":[6,22],
+                "pout1":[6,23],
+                "pout2":[6,24],
+                "pout3":[6,25],
+                "pout4":[33,9],
+                "pout5":[33,8],
+                "pout6":[33,11],
+                "pout7":[33,12],
+                "lled":[3,[9,8,11,12]],
+                "pwm0" :[33,4],
+                "pwm1" :[33,5],
+                "pwm2" :[3,6],
+                "pwm3" :[3,7],
+                "pwm10":[3,3],
+                "thermostat":[5,2,33],
+                "airgate1":[12,[-4,-27,59,617,284,5000]],
+                "airgate2":[12,[-5,-26,60,750,160,5000]],
+                "airgates":[7,["airgate1","airgate2"]],
+                "pid0":[413,
+                        [
+                          [20,0.2,7,0,100],
+                          [{"item":"airgates/set","emit":"pid_out","pin":29},{"item":"pwm10/set"}]],
+                        32.1],
+                "relaytermostat":[16,[[2,3.5,10000],{"pin":28},33]],
+                "virtualAC0":[17,[]],
+                "vent5":[18,
+                              {
+                              "":{"item":"dimmer3/set"},  
+                              "airgate1":{"V":100,"set":255,"item":"airgate1/set"},
+                              "airgate2":{"V":200,"set":128,"cmd":2,"item":"airgate2/set"},
+                              "airgate4":{"V":150,"set":0,"emit":"edem/in/airgate4/set"}
+                              }             
+                        ],
+                
+                
+		"unprot0":[6,33],
+		"unprot1":[6,32],
+		"unprot2":[6,31],
+		"unprot3":[6,30],
+		"unprot4":[6,29],
+		"unprot5":[6,28],
+		"unprot6":[66,27],
+		"unprot7":[66,26],
+		"led": [1,1],
+		"led2":[1,5],
+		"led3":[1,9],
+		"led4":[1,13],
+		"led5":[1,17],
+		"led6":[1,21],
+		"led7":[1,25],
+		"led8":[1,29],
+		"dimmer" :[0,33],
+		"dimmer2":[0,34],
+	  "dimmer3":[0,35],
+		"dimmer4":[0,36],
+		"dimmer5":[0,37],
+		"dimmer6":[0,38],
+		"dimmers":[7,["dimmer","dimmer2","dimmer3","dimmer4","dimmer5","dimmer6"]],
+		"leds":[7,["led","led2","led3","led4","led5","led6"]],
+		"mbuses":[7,["mbusdim1","mbusdim2","mbusdim3","mbusdim4"]],
+		"all":[7,["dimmers","uouts","relays","leds","mbuses"]],
+		"relays":[7,["relay","pout1","pout2","pout3","pout4","pout5","pout6","pout7"]],
+		"uouts":[7,["unprot0","unprot1","unprot2","unprot3","unprot4","unprot5","unprot6","unprot7"]]
+    },
+ "in":{
+    "42":{"emit":"in0"},
+    "44":{"emit":"in1"},
+    "46":{"emit":"in2"},
+    "49":{"emit":"in3"},
+    "43":{"emit":"in4"},
+    "45":{"emit":"in5"},
+    "47":{"emit":"in6"},
+    "48":{"emit":"in7"},
+    "34":{"emit":"in8"},
+    "36":{"emit":"in9","item":"unprot0","scmd":"TOGGLE","rcmd":""},
+    "38":{"emit":"in10","item":"dimmers","scmd":"TOGGLE","rcmd":""},
+    "40":{"emit":"in11","item":"leds","scmd":"TOGGLE","rcmd":""},
+    "35":{"emit":"in12","item":"mbuses","scmd":"TOGGLE","rcmd":""},
+    "37":{"emit":"in13","item":"relays","scmd":"TOGGLE","rcmd":""},
+    "39":{"emit":"in14","item":"uouts","scmd":"TOGGLE","rcmd":""},
+    "41":{"emit":"in15","item":"all","scmd":"TOGGLE","rcmd":""},  
+    
+                "54":{"T":66,"emit":"myhome/in/a00","map":[0,1024,0,1024,10]},
+                "55":{"T":66,"emit":"myhome/in/a01","map":[0,1024,0,1024,10]},
+                "56":{"T":66,"emit":"myhome/in/a02","map":[0,1024,0,1024,10]},
+                "57":{"T":66,"emit":"myhome/in/a03","map":[0,1024,0,1024,10]},
+                "58":{"T":66,"emit":"myhome/in/a04","map":[0,1024,0,1024,10]},
+
+                "61":{"T":66,"emit":"myhome/in/a07","map":[0,1024,0,1024,10]},
+                "62":{"T":66,"emit":"myhome/in/a08","map":[0,1024,0,1024,10]},
+                "63":{"T":66,"emit":"myhome/in/a09","map":[0,1024,0,1024,10]},
+                "64":{"T":66,"emit":"myhome/in/a10","map":[0,1024,0,1024,10]},
+                "65":{"T":66,"emit":"myhome/in/a11","map":[0,1024,0,1024,10]},
+                "66":{"T":0,"emit":"myhome/in/d12"},
+                "67":{"T":0,"emit":"myhome/in/d13"},
+                "68":{"T":0,"emit":"myhome/in/d14"},
+                "69":{"T":0,"emit":"myhome/in/d15"}
+    
+         }
+  }

compiled/lighthub21/unlock/unlock.bat

@@ -0,0 +1,91 @@
+@ECHO off
+
+REM Wait X second for memory on Arduino Due is erased.
+SET WAIT_ERASED=4
+
+ECHO ------ External tool BossacArduinoDue started ------
+
+REM number of command line arguments ok?
+REM IF [%1]==[] GOTO error_args
+REM IF [%2]==[] GOTO error_args
+
+REM set command line arguments
+SET BOSSACPATH=..\tools\win\tool-bossac\bossac.exe
+SET BINFILE=firmware.bin
+
+REM parse command line arguments
+SET BOSSACPATH=%BOSSACPATH:"=%
+SET BINFILE=%BINFILE:"=%
+
+REM workeround for bug in Atmel Studio 6.0.1996 Service Pack 2
+SET BINFILE=%BINFILE:\\=\%
+SET BINFILE=%BINFILE:.cproj=%
+
+REM bossac path exist?
+IF NOT EXIST "%BOSSACPATH%" GOTO error_arg1
+
+REM bin file exist?
+IF NOT EXIST "%BINFILE%" GOTO error_binfile
+
+REM fetch DeviceID of Arduino Due Programming Port from WMI Service
+FOR /f "tokens=* skip=1" %%a IN ('wmic PATH Win32_SerialPort Where "Caption LIKE '%%BOSSA%%'" get DeviceID') DO (
+    SET COMX=%%a
+    GOTO exit1
+)
+
+REM Arduino Due Programming Port not exist
+GOTO error_comport
+
+:exit1
+
+REM remove blank
+SET COMPORT=%COMX: =%
+
+REM report in Atmel Studio 6.0 IDE output window
+ECHO BossacPath=%BOSSACPATH%
+ECHO BinFile=%BINFILE%
+ECHO Arduino Due Programming Port is detected as %COMPORT%.
+
+REM The bossac bootloader only runs if the memory on Arduino Due is erased.
+REM The Arduino IDE does this by opening and closing the COM port at 1200 baud.
+REM This causes the Due to execute a soft erase command.
+ECHO Forcing reset using 1200bps open/close on port 
+ECHO MODE %COMPORT%:1200,N,8,1
+MODE %COMPORT%:1200,N,8,1
+
+REM Wait X second for memory on Arduino Due is erased.
+ECHO Wait for memory on Arduino Due is erased...
+PING -n %WAIT_ERASED% 127.0.0.1>NUL
+
+REM Execute bossac.exe
+ECHO Execute bossac with command line:
+
+"%BOSSACPATH%" -i --port=%COMPORT%  --unlock -R 
+REM START /WAIT "" "%BOSSACPATH%" -i  --port=%COMPORT% -u -e -w -v -b "%BINFILE%" -R
+
+GOTO end
+
+:error_args
+ECHO Error: wrong number of command line arguments passed!
+GOTO end
+
+:error_arg1
+ECHO Error: command line argument 1 - path to bossac.exe not exist! - "C:\Program Files (x86)\arduino-1.5.2\hardware\tools\bossac.exe"
+ECHO Error: command line argument 1 - argument passed = %1
+GOTO end
+
+:error_arg2
+ECHO Error: command line argument 2 - path to bin file not exist! - use $(OutputDirectory)\$(OutputFileName).bin
+ECHO Error: command line argument 2 - argument passed = %1
+GOTO end
+
+:error_binfile
+ECHO Error: bin file "%BINFILE%" not exist!
+GOTO end
+
+:error_comport
+ECHO Error: Arduino Due Programming Port not found!
+
+:end
+
+ECHO ======================== Done ========================

compiled/lighthub21/upload.bat

@@ -1,3 +1,90 @@
-mode com3:1200,n,8,1
-pause
-..\tools\win\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b firmware.bin -R 
+@ECHO off
+
+REM Wait X second for memory on Arduino Due is erased.
+SET WAIT_ERASED=4
+
+ECHO ------ External tool BossacArduinoDue started ------
+
+REM number of command line arguments ok?
+REM IF [%1]==[] GOTO error_args
+REM IF [%2]==[] GOTO error_args
+
+REM set command line arguments
+SET BOSSACPATH=..\tools\win\tool-bossac\bossac.exe
+SET BINFILE=firmware.bin
+
+REM parse command line arguments
+SET BOSSACPATH=%BOSSACPATH:"=%
+SET BINFILE=%BINFILE:"=%
+
+REM workeround for bug in Atmel Studio 6.0.1996 Service Pack 2
+SET BINFILE=%BINFILE:\\=\%
+SET BINFILE=%BINFILE:.cproj=%
+
+REM bossac path exist?
+IF NOT EXIST "%BOSSACPATH%" GOTO error_arg1
+
+REM bin file exist?
+IF NOT EXIST "%BINFILE%" GOTO error_binfile
+
+REM fetch DeviceID of Arduino Due Programming Port from WMI Service
+FOR /f "tokens=* skip=1" %%a IN ('wmic PATH Win32_SerialPort Where "Caption LIKE '%%Due%%'" get DeviceID') DO (
+    SET COMX=%%a
+    GOTO exit1
+)
+
+REM Arduino Due Programming Port not exist
+GOTO error_comport
+
+:exit1
+
+REM remove blank
+SET COMPORT=%COMX: =%
+
+REM report in Atmel Studio 6.0 IDE output window
+ECHO BossacPath=%BOSSACPATH%
+ECHO BinFile=%BINFILE%
+ECHO Arduino Due Programming Port is detected as %COMPORT%.
+
+REM The bossac bootloader only runs if the memory on Arduino Due is erased.
+REM The Arduino IDE does this by opening and closing the COM port at 1200 baud.
+REM This causes the Due to execute a soft erase command.
+ECHO Forcing reset using 1200bps open/close on port 
+ECHO MODE %COMPORT%:1200,N,8,1
+MODE %COMPORT%:1200,N,8,1
+
+REM Wait X second for memory on Arduino Due is erased.
+ECHO Wait for memory on Arduino Due is erased...
+PING -n %WAIT_ERASED% 127.0.0.1>NUL
+
+REM Execute bossac.exe
+ECHO Execute bossac with command line:
+"%BOSSACPATH%"  -i  --port=%COMPORT% -U false   -w -v -b "%BINFILE%" -R
+REM START /WAIT "" "%BOSSACPATH%" -i  --port=%COMPORT% -U false -e -w -v -b "%BINFILE%" -R
+
+GOTO end
+
+:error_args
+ECHO Error: wrong number of command line arguments passed!
+GOTO end
+
+:error_arg1
+ECHO Error: command line argument 1 - path to bossac.exe not exist! - "C:\Program Files (x86)\arduino-1.5.2\hardware\tools\bossac.exe"
+ECHO Error: command line argument 1 - argument passed = %1
+GOTO end
+
+:error_arg2
+ECHO Error: command line argument 2 - path to bin file not exist! - use $(OutputDirectory)\$(OutputFileName).bin
+ECHO Error: command line argument 2 - argument passed = %1
+GOTO end
+
+:error_binfile
+ECHO Error: bin file "%BINFILE%" not exist!
+GOTO end
+
+:error_comport
+ECHO Error: Arduino Due Programming Port not found!
+
+:end
+
+ECHO ======================== Done ========================

compiled/lighthub21/uploadCFG.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.88.45 -port 65280 -username arduino -password password -sketch data/config.json -b -upload /data

compiled/lighthub21/uploadNative.bat

@@ -0,0 +1,91 @@
+@ECHO off
+
+REM Wait X second for memory on Arduino Due is erased.
+SET WAIT_ERASED=4
+
+ECHO ------ External tool BossacArduinoDue started ------
+
+REM number of command line arguments ok?
+REM IF [%1]==[] GOTO error_args
+REM IF [%2]==[] GOTO error_args
+
+REM set command line arguments
+SET BOSSACPATH=..\tools\win\tool-bossac\bossac.exe
+SET BINFILE=firmware.bin
+
+REM parse command line arguments
+SET BOSSACPATH=%BOSSACPATH:"=%
+SET BINFILE=%BINFILE:"=%
+
+REM workeround for bug in Atmel Studio 6.0.1996 Service Pack 2
+SET BINFILE=%BINFILE:\\=\%
+SET BINFILE=%BINFILE:.cproj=%
+
+REM bossac path exist?
+IF NOT EXIST "%BOSSACPATH%" GOTO error_arg1
+
+REM bin file exist?
+IF NOT EXIST "%BINFILE%" GOTO error_binfile
+
+REM fetch DeviceID of Arduino Due Programming Port from WMI Service
+FOR /f "tokens=* skip=1" %%a IN ('wmic PATH Win32_SerialPort Where "Caption LIKE '%%BOSSA%%'" get DeviceID') DO (
+    SET COMX=%%a
+    GOTO exit1
+)
+
+REM Arduino Due Programming Port not exist
+GOTO error_comport
+
+:exit1
+
+REM remove blank
+SET COMPORT=%COMX: =%
+
+REM report in Atmel Studio 6.0 IDE output window
+ECHO BossacPath=%BOSSACPATH%
+ECHO BinFile=%BINFILE%
+ECHO Arduino Due Programming Port is detected as %COMPORT%.
+
+REM The bossac bootloader only runs if the memory on Arduino Due is erased.
+REM The Arduino IDE does this by opening and closing the COM port at 1200 baud.
+REM This causes the Due to execute a soft erase command.
+ECHO Forcing reset using 1200bps open/close on port 
+ECHO MODE %COMPORT%:1200,N,8,1
+MODE %COMPORT%:1200,N,8,1
+
+REM Wait X second for memory on Arduino Due is erased.
+ECHO Wait for memory on Arduino Due is erased...
+PING -n %WAIT_ERASED% 127.0.0.1>NUL
+
+REM Execute bossac.exe
+ECHO Execute bossac with command line:
+
+"%BOSSACPATH%" -i --port=%COMPORT%  -w -v -b "%BINFILE%" -R
+REM START /WAIT "" "%BOSSACPATH%" -i  --port=%COMPORT% -u -e -w -v -b "%BINFILE%" -R
+
+GOTO end
+
+:error_args
+ECHO Error: wrong number of command line arguments passed!
+GOTO end
+
+:error_arg1
+ECHO Error: command line argument 1 - path to bossac.exe not exist! - "C:\Program Files (x86)\arduino-1.5.2\hardware\tools\bossac.exe"
+ECHO Error: command line argument 1 - argument passed = %1
+GOTO end
+
+:error_arg2
+ECHO Error: command line argument 2 - path to bin file not exist! - use $(OutputDirectory)\$(OutputFileName).bin
+ECHO Error: command line argument 2 - argument passed = %1
+GOTO end
+
+:error_binfile
+ECHO Error: bin file "%BINFILE%" not exist!
+GOTO end
+
+:error_comport
+ECHO Error: Arduino Due Programming Port not found!
+
+:end
+
+ECHO ======================== Done ========================

compiled/lighthub21/uploadOTA.BAT

@@ -0,0 +1 @@
+..\tools\arduinoOTA -address 192.168.11.204 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/lighthub21/uploadOTA.bat

@@ -1,5 +0,0 @@
-<<<<<<< HEAD
-..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
-=======
-..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
->>>>>>> 9b164a1dfc40ee0e8f29dbedff4f3954edf55d76

compiled/lighthub21/uploadOTA.sh

@@ -1 +1 @@
-../tools/mac/arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
+../tools/mac/arduinoOTA -address 192.168.11.172 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/mega2560slim-5100/update_bin.sh

@@ -0,0 +1 @@
+cp ../../.pio/build/lighthub21/firmware.bin .

compiled/mega2560slim-5100/uploadOTA.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -P net:192.168.88.2:23000 -v -V  -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/stm32/upload.sh

@@ -0,0 +1 @@
+dfu-util -D firmware.bin -a 1 

compiled/untitled folder/upload.bat

@@ -1,3 +0,0 @@
-mode com3:1200,n,8,1
-pause
-..\tools\win\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b firmware.bin -R 

compiled/update_bin.bat

@@ -0,0 +1,16 @@
+copy ..\.pio\build\due\firmware.bin due
+copy ..\.pio\build\controllino\firmware.hex controllino
+copy ..\.pio\build\m5stack\firmware.bin m5stack
+copy ..\.pio\build\mega2560slim-5100\firmware.hex mega2560slim-5100
+copy ..\.pio\build\mega2560slim-5100\firmware.bin mega2560slim-5100
+copy ..\.pio\build\mega2560slim2\firmware.hex mega2560slim2
+copy ..\.pio\build\mega2560slim2\firmware.bin mega2560slim2
+copy ..\.pio\build\due-5100\firmware.bin due-5100
+copy ..\.pio\build\mega2560-5100\firmware.hex mega2560-5100
+copy ..\.pio\build\due-5500\firmware.bin due-5500
+copy ..\.pio\build\nrf52840\firmware.hex nrf52840-5500
+copy ..\.pio\build\esp32-wifi\firmware.bin esp32-wifi
+copy ..\.pio\build\stm32-enc2860\firmware.bin stm32-enc2860
+copy ..\.pio\build\esp8266-wifi\firmware.bin esp8266-wifi
+copy ..\.pio\build\lighthub21\firmware.bin lighthub21
+copy ..\.pio\build\mega2560-5500\firmware.hex mega2560-5500

compiled/update_bin.sh

@@ -2,12 +2,14 @@ cp ../.pio/build/due/firmware.bin due
 cp ../.pio/build/controllino/firmware.hex controllino
 cp ../.pio/build/m5stack/firmware.bin m5stack
 cp ../.pio/build/mega2560slim-5100/firmware.hex mega2560slim-5100
-cp ../.pio/build/due-5100/firmware.bin due-5100
+cp ../.pio/build/mega2560slim-5100/firmware.bin mega2560slim-5100
+cp ../.pio/build/mega2560-optiboot/firmware.hex mega2560-optiboot
+cp ../.pio/build/mega2560-optiboot/firmware.bin mega2560-optiboot
 cp ../.pio/build/mega2560-5100/firmware.hex mega2560-5100
-cp ../.pio/build/due-5500/firmware.bin due-5500
-cp ../.pio/build/nrf52840-5500/firmware.hex nrf52840-5500
+cp ../.pio/build/nrf52840/firmware.hex nrf52840
 cp ../.pio/build/esp32-wifi/firmware.bin esp32-wifi
 cp ../.pio/build/stm32-enc2860/firmware.bin stm32-enc2860
 cp ../.pio/build/esp8266-wifi/firmware.bin esp8266-wifi
 cp ../.pio/build/lighthub21/firmware.bin lighthub21
-cp ../.pio/build/mega2560-5500/firmware.hex mega2560-5500
+cp ../.pio/build/mega2560-5500/firmware.hex mega2560-5500
+cp ../.pio/build/stm32/firmware.* stm32

config-examples/sonoff_s26_humidity_controller.json

@@ -0,0 +1,25 @@
+{
+  "syslog":["95.31.43.9"],
+  "items": {
+    "ledhum":[6,-13],
+    "reghum": [13, [
+      [50, 10, 0, 60, 250, 200], [{"item": "relayhum"}, {"item":"ledhum"}]
+    ], 30, 12],
+    
+    "relayhum": [16, [12, 1200], 255, 2]
+    },
+"in":{
+          "0":{"T":0,
+                "click":{ "item":"reghum","icmd":"TOGGLE"},
+                "dclick":{ "emit":"myhome/light-d2/light","ecmd":"TOGGLE"}
+              },
+          
+          "3":{"T":4,
+            "temp":{"emit":"plugtemp"},
+            "hum":{"item":"reghum/val","emit":"plughum"}
+              }
+          
+         },
+
+  "mqtt":["plug00","192.168.88.2"]
+}

data/config.json

@@ -0,0 +1,62 @@
+{
+  "syslog":["192.168.88.2"],
+  "mqtt1":["esp32","m2m.eclipse.org"],
+  "mqtt":["elevator","192.168.88.2"],
+  "mqtt4":["esp32","test.mosquitto.org"],
+  "dmx":[30],
+  "items": {
+    "relay1":[6,32],
+    "relay2":[6,33],
+    "relays":[7,["relay1","relay2"]],
+    "sensair1":[44,[254,
+                  "sensair",
+                  {"co2":{"emit":"co2"}},
+                  {"mode":"auto"}
+                  ]
+              ],
+    "elevator":[15,{"baud":9600,"serial":"8N1","ip":"192.168.88.255","port":502}],          
+              
+    "aaa1":[44,[254,
+                  "aaa",
+                  {"aaa1":{"emit":"aaa2"}},
+                  {"mode":"auto"}
+                  ]
+              ]
+    },
+   "modbus":
+   {
+   "aaa":
+              {"baud":19200,
+               "poll":{"irs":[1]},
+                "par":{
+                  "aaa1":{"ir":1}
+                }
+                
+              },
+   "sensair":{"baud":9600,
+             "poll":{"irs":[[0,3],21,[25,30]],"regs":[0,1,31],"delay":1000},
+             "par":{
+                            "co2":{"ir":3},
+                            "meterStat":{"ir":0},
+                            "alarmStat":{"ir":1},
+                            "outStat":{"ir":0},
+                            "pwm":{"ir":21},
+                            "typeid":{"ir":25,"type":"u32"},
+                            "mapver":{"ir":27},
+                            "fwver":{"ir":28},
+                            "sensorid":{"ir":29,"type":"u32"},
+                            "ack":{"reg":0},
+                            "command":{"reg":1},
+                            "abc":{"reg":31}
+                            
+                            
+             }
+          
+    }
+   },
+  
+"in":{    "34":{"item":"relays","emit":"myhome/in/bedr","scmd":"TOGGLE","rcmd":""},
+
+          "17":{"T":64,"emit":"analog","map":[0,1024,0,100,15]}
+         }
+}

docs/html/abstractch_8cpp.html

@@ -9,6 +9,10 @@
 <link href="tabs.css" rel="stylesheet" type="text/css"/>
 <script type="text/javascript" src="jquery.js"></script>
 <script type="text/javascript" src="dynsections.js"></script>
+<link href="navtree.css" rel="stylesheet" type="text/css"/>
+<script type="text/javascript" src="resize.js"></script>
+<script type="text/javascript" src="navtreedata.js"></script>
+<script type="text/javascript" src="navtree.js"></script>
 <link href="search/search.css" rel="stylesheet" type="text/css"/>
 <script type="text/javascript" src="search/searchdata.js"></script>
 <script type="text/javascript" src="search/search.js"></script>
@@ -23,7 +27,9 @@
   <td id="projectlogo"><img alt="Logo" src="lh.png"/></td>
   <td id="projectalign" style="padding-left: 0.5em;">
    <div id="projectname">LightHub
+   &#160;<span id="projectnumber">v4.0.0</span>
    </div>
+   <div id="projectbrief">Smarthome controller firmware</div>
   </td>
  </tr>
  </tbody>
@@ -46,6 +52,23 @@ $(function() {
 });
 /* @license-end */</script>
 <div id="main-nav"></div>
+</div><!-- top -->
+<div id="side-nav" class="ui-resizable side-nav-resizable">
+  <div id="nav-tree">
+    <div id="nav-tree-contents">
+      <div id="nav-sync" class="sync"></div>
+    </div>
+  </div>
+  <div id="splitbar" style="-moz-user-select:none;" 
+       class="ui-resizable-handle">
+  </div>
+</div>
+<script type="text/javascript">
+/* @license magnet:?xt=urn:btih:cf05388f2679ee054f2beb29a391d25f4e673ac3&amp;dn=gpl-2.0.txt GPL-v2 */
+$(document).ready(function(){initNavTree('abstractch_8cpp.html',''); initResizable(); });
+/* @license-end */
+</script>
+<div id="doc-content">
 <!-- window showing the filter options -->
 <div id="MSearchSelectWindow"
      onmouseover="return searchBox.OnSearchSelectShow()"
@@ -60,11 +83,6 @@ $(function() {
 </iframe>
 </div>
 
-<div id="nav-path" class="navpath">
-  <ul>
-<li class="navelem"><a class="el" href="dir_82d7c1f210290ade9e0671f857ad27e3.html">lighthub</a></li>  </ul>
-</div>
-</div><!-- top -->
 <div class="header">
   <div class="summary">
 <a href="#var-members">Variables</a>  </div>
@@ -77,47 +95,6 @@ $(function() {
 <code>#include &quot;<a class="el" href="utils_8h_source.html">utils.h</a>&quot;</code><br />
 <code>#include &lt;aJSON.h&gt;</code><br />
 <code>#include &quot;<a class="el" href="main_8h_source.html">main.h</a>&quot;</code><br />
-</div><div class="textblock"><div class="dynheader">
-Include dependency graph for abstractch.cpp:</div>
-<div class="dyncontent">
-<div class="center"><img src="abstractch_8cpp__incl.png" border="0" usemap="#aabstractch_8cpp" alt=""/></div>
-<map name="abstractch_8cpp" id="aabstractch_8cpp">
-<area shape="rect" title=" " alt="" coords="854,5,962,32"/>
-<area shape="rect" href="abstractch_8h.html" title=" " alt="" coords="1015,379,1110,405"/>
-<area shape="rect" title=" " alt="" coords="111,155,224,181"/>
-<area shape="rect" href="utils_8h.html" title=" " alt="" coords="248,155,306,181"/>
-<area shape="rect" title=" " alt="" coords="740,304,816,331"/>
-<area shape="rect" href="main_8h.html" title=" " alt="" coords="877,80,938,107"/>
-<area shape="rect" title=" " alt="" coords="880,453,957,480"/>
-<area shape="rect" title=" " alt="" coords="31,229,123,256"/>
-<area shape="rect" href="options_8h.html" title=" " alt="" coords="324,304,398,331"/>
-<area shape="rect" href="item_8h.html" title=" " alt="" coords="365,229,424,256"/>
-<area shape="rect" title=" " alt="" coords="147,229,239,256"/>
-<area shape="rect" href="abstractout_8h.html" title=" " alt="" coords="617,304,716,331"/>
-<area shape="rect" href="item_cmd_8h.html" title=" " alt="" coords="623,379,710,405"/>
-<area shape="rect" href="streamlog_8h.html" title=" " alt="" coords="984,155,1074,181"/>
-<area shape="rect" title=" " alt="" coords="582,229,724,256"/>
-<area shape="rect" title=" " alt="" coords="1099,155,1218,181"/>
-<area shape="rect" href="ow_term_8h.html" title=" " alt="" coords="830,155,908,181"/>
-<area shape="rect" href="dmx_8h.html" title=" " alt="" coords="448,229,506,256"/>
-<area shape="rect" title=" " alt="" coords="1242,155,1325,181"/>
-<area shape="rect" href="textconst_8h.html" title=" " alt="" coords="1442,155,1528,181"/>
-<area shape="rect" title=" " alt="" coords="1552,155,1607,181"/>
-<area shape="rect" title=" " alt="" coords="1631,155,1696,181"/>
-<area shape="rect" title=" " alt="" coords="498,155,560,181"/>
-<area shape="rect" title=" " alt="" coords="584,155,653,181"/>
-<area shape="rect" href="inputs_8h.html" title=" " alt="" coords="1350,155,1418,181"/>
-<area shape="rect" title=" " alt="" coords="1314,229,1374,256"/>
-<area shape="rect" title=" " alt="" coords="1064,229,1186,256"/>
-<area shape="rect" title=" " alt="" coords="1211,229,1290,256"/>
-<area shape="rect" title=" " alt="" coords="996,304,1056,331"/>
-<area shape="rect" title=" " alt="" coords="800,229,938,256"/>
-<area shape="rect" href="in__ccs811__hdc1080_8h.html" title=" " alt="" coords="1500,229,1702,256"/>
-<area shape="rect" href="abstractin_8h.html" title=" " alt="" coords="1081,304,1172,331"/>
-<area shape="rect" title=" " alt="" coords="1353,304,1524,331"/>
-<area shape="rect" title=" " alt="" coords="1548,304,1686,331"/>
-</map>
-</div>
 </div><table class="memberdecls">
 <tr class="heading"><td colspan="2"><h2 class="groupheader"><a name="var-members"></a>
 Variables</h2></td></tr>
@@ -196,9 +173,13 @@ Variables</h2></td></tr>
 </div>
 </div>
 </div><!-- contents -->
+</div><!-- doc-content -->
 <!-- start footer part -->
-<hr class="footer"/><address class="footer"><small>
-Generated by&#160;<a href="http://www.doxygen.org/index.html"><img class="footer" src="doxygen.svg" width="104" height="31" alt="doxygen"/></a> 1.8.20
-</small></address>
+<div id="nav-path" class="navpath"><!-- id is needed for treeview function! -->
+  <ul>
+    <li class="navelem"><a class="el" href="abstractch_8cpp.html">abstractch.cpp</a></li>
+    <li class="footer">Generated by <a href="http://www.doxygen.org/index.html"><img class="footer" src="doxygen.svg" width="104" height="31" alt="doxygen"/></a> 1.8.20 </li>
+  </ul>
+</div>
 </body>
 </html>

docs/html/abstractch_8cpp.js

@@ -0,0 +1,6 @@
+var abstractch_8cpp =
+[
+    [ "ethernetIdleCount", "abstractch_8cpp.html#a525d99b2753ef2f4055ea4475dbc10d7", null ],
+    [ "lanStatus", "abstractch_8cpp.html#a7bbda7cf303a1bc3222e7a270f9040bd", null ],
+    [ "mqttClient", "abstractch_8cpp.html#a86d63f481644da70f063c2593fcafe19", null ]
+];

docs/html/abstractch_8h.html

@@ -9,6 +9,10 @@
 <link href="tabs.css" rel="stylesheet" type="text/css"/>
 <script type="text/javascript" src="jquery.js"></script>
 <script type="text/javascript" src="dynsections.js"></script>
+<link href="navtree.css" rel="stylesheet" type="text/css"/>
+<script type="text/javascript" src="resize.js"></script>
+<script type="text/javascript" src="navtreedata.js"></script>
+<script type="text/javascript" src="navtree.js"></script>
 <link href="search/search.css" rel="stylesheet" type="text/css"/>
 <script type="text/javascript" src="search/searchdata.js"></script>
 <script type="text/javascript" src="search/search.js"></script>
@@ -23,7 +27,9 @@
   <td id="projectlogo"><img alt="Logo" src="lh.png"/></td>
   <td id="projectalign" style="padding-left: 0.5em;">
    <div id="projectname">LightHub
+   &#160;<span id="projectnumber">v4.0.0</span>
    </div>
+   <div id="projectbrief">Smarthome controller firmware</div>
   </td>
  </tr>
  </tbody>
@@ -46,6 +52,23 @@ $(function() {
 });
 /* @license-end */</script>
 <div id="main-nav"></div>
+</div><!-- top -->
+<div id="side-nav" class="ui-resizable side-nav-resizable">
+  <div id="nav-tree">
+    <div id="nav-tree-contents">
+      <div id="nav-sync" class="sync"></div>
+    </div>
+  </div>
+  <div id="splitbar" style="-moz-user-select:none;" 
+       class="ui-resizable-handle">
+  </div>
+</div>
+<script type="text/javascript">
+/* @license magnet:?xt=urn:btih:cf05388f2679ee054f2beb29a391d25f4e673ac3&amp;dn=gpl-2.0.txt GPL-v2 */
+$(document).ready(function(){initNavTree('abstractch_8h.html',''); initResizable(); });
+/* @license-end */
+</script>
+<div id="doc-content">
 <!-- window showing the filter options -->
 <div id="MSearchSelectWindow"
      onmouseover="return searchBox.OnSearchSelectShow()"
@@ -60,11 +83,6 @@ $(function() {
 </iframe>
 </div>
 
-<div id="nav-path" class="navpath">
-  <ul>
-<li class="navelem"><a class="el" href="dir_82d7c1f210290ade9e0671f857ad27e3.html">lighthub</a></li>  </ul>
-</div>
-</div><!-- top -->
 <div class="header">
   <div class="summary">
 <a href="#nested-classes">Classes</a> &#124;
@@ -74,54 +92,6 @@ $(function() {
 </div><!--header-->
 <div class="contents">
 <div class="textblock"><code>#include &quot;Arduino.h&quot;</code><br />
-</div><div class="textblock"><div class="dynheader">
-Include dependency graph for abstractch.h:</div>
-<div class="dyncontent">
-<div class="center"><img src="abstractch_8h__incl.png" border="0" usemap="#aabstractch_8h" alt=""/></div>
-<map name="abstractch_8h" id="aabstractch_8h">
-<area shape="rect" title=" " alt="" coords="5,5,100,32"/>
-<area shape="rect" title=" " alt="" coords="14,80,91,107"/>
-</map>
-</div>
-</div><div class="textblock"><div class="dynheader">
-This graph shows which files directly or indirectly include this file:</div>
-<div class="dyncontent">
-<div class="center"><img src="abstractch_8h__dep__incl.png" border="0" usemap="#aabstractch_8hdep" alt=""/></div>
-<map name="abstractch_8hdep" id="aabstractch_8hdep">
-<area shape="rect" title=" " alt="" coords="334,5,429,32"/>
-<area shape="rect" href="abstractch_8cpp.html" title=" " alt="" coords="427,379,535,405"/>
-<area shape="rect" href="abstractin_8cpp.html" title=" " alt="" coords="5,379,109,405"/>
-<area shape="rect" href="abstractin_8h.html" title=" " alt="" coords="236,80,327,107"/>
-<area shape="rect" href="abstractout_8h.html" title=" " alt="" coords="1519,80,1617,107"/>
-<area shape="rect" href="in__ccs811__hdc1080_8h.html" title=" " alt="" coords="207,155,355,181"/>
-<area shape="rect" href="inputs_8h.html" title=" " alt="" coords="247,229,315,256"/>
-<area shape="rect" href="in__ccs811__hdc1080_8cpp.html" title=" " alt="" coords="133,379,296,405"/>
-<area shape="rect" href="inputs_8cpp.html" title=" " alt="" coords="320,379,403,405"/>
-<area shape="rect" href="main_8h.html" title=" " alt="" coords="776,304,837,331"/>
-<area shape="rect" href="colorchannel_8cpp.html" title=" " alt="" coords="1125,379,1245,405"/>
-<area shape="rect" href="item_8cpp.html" title=" " alt="" coords="1791,379,1863,405"/>
-<area shape="rect" href="item_cmd_8cpp.html" title=" " alt="" coords="873,379,973,405"/>
-<area shape="rect" href="main_8cpp.html" title=" " alt="" coords="773,379,848,405"/>
-<area shape="rect" href="out__ac_8cpp.html" title=" " alt="" coords="1997,379,2083,405"/>
-<area shape="rect" href="out__dmx_8cpp.html" title=" " alt="" coords="1270,379,1367,405"/>
-<area shape="rect" href="out__modbus_8cpp.html" title=" " alt="" coords="1647,379,1766,405"/>
-<area shape="rect" href="out__motor_8cpp.html" title=" " alt="" coords="997,379,1101,405"/>
-<area shape="rect" href="out__pwm_8cpp.html" title=" " alt="" coords="1391,379,1491,405"/>
-<area shape="rect" href="out__spiled_8cpp.html" title=" " alt="" coords="1516,379,1623,405"/>
-<area shape="rect" href="ow_term_8cpp.html" title=" " alt="" coords="560,379,653,405"/>
-<area shape="rect" href="utils_8cpp.html" title=" " alt="" coords="678,379,749,405"/>
-<area shape="rect" href="colorchannel_8h.html" title=" " alt="" coords="1515,229,1621,256"/>
-<area shape="rect" href="out__dmx_8h.html" title=" " alt="" coords="1376,304,1459,331"/>
-<area shape="rect" href="out__pwm_8h.html" title=" " alt="" coords="1635,304,1722,331"/>
-<area shape="rect" href="out__spiled_8h.html" title=" " alt="" coords="1746,304,1838,331"/>
-<area shape="rect" href="item_8h.html" title=" " alt="" coords="1169,155,1228,181"/>
-<area shape="rect" href="out__modbus_8h.html" title=" " alt="" coords="1899,229,2003,256"/>
-<area shape="rect" href="out__motor_8h.html" title=" " alt="" coords="1261,304,1352,331"/>
-<area shape="rect" href="out__ac_8h.html" title=" " alt="" coords="2077,304,2149,331"/>
-<area shape="rect" href="dmx_8cpp.html" title=" " alt="" coords="1013,229,1085,256"/>
-<area shape="rect" href="utils_8h.html" title=" " alt="" coords="643,229,701,256"/>
-</map>
-</div>
 </div>
 <p><a href="abstractch_8h_source.html">Go to the source code of this file.</a></p>
 <table class="memberdecls">
@@ -183,9 +153,13 @@ Macros</h2></td></tr>
 </div>
 </div>
 </div><!-- contents -->
+</div><!-- doc-content -->
 <!-- start footer part -->
-<hr class="footer"/><address class="footer"><small>
-Generated by&#160;<a href="http://www.doxygen.org/index.html"><img class="footer" src="doxygen.svg" width="104" height="31" alt="doxygen"/></a> 1.8.20
-</small></address>
+<div id="nav-path" class="navpath"><!-- id is needed for treeview function! -->
+  <ul>
+    <li class="navelem"><a class="el" href="abstractch_8h.html">abstractch.h</a></li>
+    <li class="footer">Generated by <a href="http://www.doxygen.org/index.html"><img class="footer" src="doxygen.svg" width="104" height="31" alt="doxygen"/></a> 1.8.20 </li>
+  </ul>
+</div>
 </body>
 </html>

docs/html/abstractch_8h.js

@@ -0,0 +1,7 @@
+var abstractch_8h =
+[
+    [ "abstractCh", "classabstract_ch.html", "classabstract_ch" ],
+    [ "CST_FAILED", "abstractch_8h.html#adcf23ecf1f6e4dbc5a6780645425399e", null ],
+    [ "CST_INITIALIZED", "abstractch_8h.html#ab7dea1d4d49f436619dd52ce3da0d6c3", null ],
+    [ "CST_UNKNOWN", "abstractch_8h.html#ad5c9fbfc15fa16113c539de3867f54fc", null ]
+];