Merge pull request #54 from anklimov/develop

Release-2.1

.gitignore

@@ -1,5 +1,21 @@
 .pioenvs
 .piolibdeps
+.pio
 .clang_complete
 .gcc-flags.json
+.DS_Store
 CMakeListsPrivate.txt
+custom-build-flags/*
+custom-build-flags/build_flags_due
+custom-build-flags/build_flags_esp32
+custom-build-flags/build_flags_esp8266
+custom-build-flags/build_flags_stm32
+custom-build-flags/build_flags_due-5500
+custom-build-flags/build_flags_mega2560
+custom-build-flags/build_flags_mega2560-net
+custom-build-flags/build_flags_controllino
+custom-build-flags/build_flags_nrf52840
+.vscode/*
+.vscode/.browse.c_cpp.db
+.vscode/c_cpp_properties.json
+.vscode/launch.json

.idea/markdown-exported-files.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="MarkdownExportedFiles">
+    <htmlFiles />
+    <imageFiles />
+    <otherFiles />
+  </component>
+</project>

README.md

@@ -1,26 +1,33 @@
 # LightHub
-is Flexible, Arduino-Mega/Arduino DUE/ESP8266 open-software and open-hardware SmartHome controller. [RU](https://geektimes.ru/post/295109/) [HOME-site RU](http://lazyhome.ru)
+is Flexible, Arduino-Mega/Arduino DUE/ESP8266/ESP32 open-software and open-hardware SmartHome controller. [RU](https://geektimes.ru/post/295109/) [HOME-site RU](http://lazyhome.ru)
 It may operate both: 
 * On [especially designed hardware board](http://www.lazyhome.ru/index.php/featurerequest) with 16 optocoupled digital inputs, 16 ESD protected digital/analog Inputs/outputs, 8 open-collector outputs (up to 0.5A/50V), DMX IN/OUT, MODBUS RTU and hardware 1-wire support circuit.
-* On plain Arduino MEGA 2560, Arduino DUE, ESP8266 and even on [Controllino](http://controllino.biz/)
-(Controllino and ESP8266 is not tested enough and in experimental stage yet)
+* On plain Arduino MEGA 2560, Arduino DUE, ESP8266, ESP32 and even on [Controllino](http://controllino.biz/)
+(Controllino is not tested enough)
 
 Lighthub allows connecting together:
 * Contact sensors (switches, buttons etc)
+* Analog sensors (Leak detectors, Knobs etc)
 * 1-Wire temperature sensors (up to 20 on single bus)
-* Standard nonexpensive Relay board with TTL inputs, [like this](https://aliexpress.com/item/16-Channel-20A-Relay-Control-Module-for-Arduino-UNO-MEGA2560-R3-Raspberry-Pi/32747887693.html) to control AC powered lamps, floor heaters, boilers etc
-* [Standard nonexpensive LED dimmers](https://aliexpress.com/item/30-channel-27channel-Easy-DMX-LED-controller-dmx-decoder-driver-rgb-led-controller/2015743918.html) and [AC DMX-512 dimmers](https://aliexpress.com/item/DMX302-led-DMX-triac-dimmer-brightness-controller-AC90V-240V-Output-3channels-1A-CH-High-voltage-led/32822841266.html)
+* Temperature/Humidity/CO2 sensors: DHT22, CS811, HDC1080
+* Standard nonexpensive Relay board with TTL inputs, [like this](http://ali.pub/2zlosh) to control AC powered lamps, floor heaters, boilers etc
+* [Standard nonexpensive LED dimmers](http://ali.pub/2zlokp) and [AC DMX-512 dimmers](http://ali.pub/2zlont)
 * Modbus RTU devices (Currently, are deployed two types of Modbus devices: AC Dimmer and Ventilation set (Based on [Vacon 10 controller](http://files.danfoss.com/download/Drives/Vacon-10-Quick-Guide-DPD00714F1-UK.pdf))
-* Simple DMX wall sensor panel [like this](https://aliexpress.com/item/New-Ltech-D8-LED-rgb-RGBW-touch-panel-controller-DMX512-controller-DC12-24V-4-zones-4/32800199589.html)
+* Simple DMX wall sensor panel [like this](http://ali.pub/2zlohe)
+
+[List of non-expensive compatible components from AliExpress here](http://ppv.alipromo.com/custom/promo.php?hash=pjagwaovaero6vkeabjpkpvy4gznbgkc&landing_id=39661)
 
 ![alt text](LightHub.png "LightHub application diagram")
 
-Where is possible both, to configure local control/mapping between inputs and outputs (light, floor heating thermostats) and remote control from MQTT enabled software. At the moment, LightHub tested with following set of complementary free software:
+
+![alt text](docs/LightHubAppDiagram.png "LightHub application diagram")
+
+Where is possible both, to configure local control/mapping between inputs and outputs (light, floor heating thermostats) and remote control from MQTT enabled software. At the moment, LightHub tested and perfectly working with following set of complementary free software:
 * [Openhab or Openhab2 Smarthome software](http://www.openhab.org/)
-Openhab provides own native mobile app both, for IoS and Android, and even allow you to use Apple's HomeKit to say "Siri, turn on light in bedroom" but requires some server to be installed (Raspberry PI with [Openhabian](https://docs.openhab.org/installation/openhabian) will good enough)
+Openhab provides own native mobile app both, for IoS and Android, and even allow you to use Apple's HomeKit and Google Home to say "Siri, turn on light in bedroom" or "Hey Google, set bedroom light to Red" but requires some server to be installed in-premises (Raspberry PI with [Openhabian](https://docs.openhab.org/installation/openhabian) will good enough)
 * [HomeRemote mobile client](http://thehomeremote.com/)
-Home Remote mobile applicatios for IoS and Android requires just MQTT broker to be working. Any Cloud-based MQTT broker, like [CloudMQTT](https://www.cloudmqtt.com/) will enough to serve average household, even with free account.
-* [Node-Red](https://nodered.org/)  Possibly, the best solution to deploy event-based authomation and scripting on top of MQTT/LightHub. The easy to use universal and visual tool to wire many different devices in single system. Having own Dashbord which allow control from web/mobile web, even without mobile apps (but excelent co-working with OpenHab and HomeRemote)
+Home Remote mobile applicatios for IoS and Android requires just MQTT broker to be working. Any Cloud-based MQTT broker, like [CloudMQTT](https://www.cloudmqtt.com/) will enough to serve average household, even with free account. 
+* [Node-Red](https://nodered.org/)  Possibly, the best solution to deploy event-based authomation and scripting on top of MQTT/LightHub. The easy to use universal and visual tool to wire many different devices in single system. Having own Dashbord which allow control from web/mobile web, even without mobile apps (excelent co-working with OpenHab and HomeRemote)
 
 Scalability of Lighthub is virtually unlimited: Setup so many controllers you needed in most convenient places of your house - MQTT broker will allow controllers communicate each other and with Openhab/NodeRed/HomeRemote and propagate commands across network.
 
@@ -30,105 +37,28 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
 * [Channel commands](https://github.com/anklimov/lighthub/wiki/Channel-commands)
 * [OpenHab integration](https://github.com/anklimov/lighthub/wiki/OpenHab--integration)
 
-Finished portation of project to  Arduino DUE and ESP8266 (ESP32 not tested).
-
-Compiled image  has been added to [compiled/](https://github.com/anklimov/lighthub/tree/master/compiled) folder. Flash your Mega 2560
-
-```bash
-avrdude  -v -V -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i
-```
-
-or flash your DUE (need to correct path and port, of course)
-```bash
-/Users/<user>/Library/Arduino15/packages/arduino/tools/bossac/1.6.1-arduino/bossac -i -d --port=cu.usbmodem1451 -U false -e -w -v -b firmware.bin -R
-```
-Note: binary images usually not up-to-date with recent code. The preferred way, to compile and upload firmware to your controller.
-
-# Dependencies
-(quite big number of libs required. Use git clone to have your local copy in your Arduino libs folder)
-Please check updates for all dependences.
-
-For patched libraries, appropriate GitHub repo URL provided:
-
-* Arduino-Temperature-Control-Library   https://github.com/anklimov/Arduino-Temperature-Control-Library
-* DS2482_OneWire                        https://github.com/anklimov/DS2482_OneWire
-* FastLED
-* Wire (standard)
-* Artnet				                https://github.com/anklimov/Artnet.git
-* DmxSimple                             https://github.com/anklimov/DmxSimple (for AVR) or https://github.com/anklimov/ESP-Dmx (for ESP) or https://github.com/anklimov/DmxDue (for DUE)
-* HTTPClient (for AVR)                  https://github.com/anklimov/HTTPClient or https://github.com/arduino-libraries/ArduinoHttpClient for other platforms
-* aJson                                 https://github.com/anklimov/aJson
-* CmdArduino                            https://github.com/anklimov/CmdArduino
-* EEPROM (standard for AVR) or DueFlashStorage for DUE: https://github.com/sebnil/DueFlashStorage
-* ModbusMaster                          https://github.com/anklimov/ModbusMaster
-* pubsubclient-2.6
-* DMXSerial-master (for AVR)            https://github.com/anklimov/DMXSerial
-* Ethernet                              https://github.com/anklimov/Ethernet
-* SPI (standard)
-
-Portation from AVR Mega 2560 to SAM3X8E (Arduino DUE) done since v 0.96 and tested against Wiznet 5100 Ethernet shield and Wiznet 5500 Ethernet module 
 
 # Platforms specific details:
 
-AVR version is basic, long tome in production and have all functions
-*DMX-out is software (DMXSimple) on pin3
+**AVR** version (Arduino Mega) is basic, long time in production and have all functions
+* DMX-out is software (DMXSimple) on pin3, can be re-defined to PIN 18 (USART1 TX)
+* DMX-in - hardware
+* WIZNET 5100 and 5500 Ethernets are supported
+* Modbus on USART2
 
-**SAM3X8E**: (Tested. Recomended hardware at current moment)
-* default PWM frequency
+**SAM3X8E** (Arduino DUE): (Tested. In production. Recomended hardware at current moment)
+* default PWM out frequency
 * both, DMX-in and DMX-out are hardware USART based. Use USART1 (pins 18 and 19) for DMX-out and DMX-in
+* WIZNET 5100 and 5500 Ethernets are supported
+* Modbus on USART2
 
-**ESP8266**: (Developed but not tested in production)
+**ESP8266, ESP32**: (Tested)
 * DMX-OUT on USART1 TX
-* DMX-IN - not possible to deploy in ESP8266
+* DMX-IN - disabled - not possible to deploy in ESP8266
 * Modbus - disabled. Might be configured in future on USART0 instead CLI/DEBUG
+* Uses Wifi interface instead wired connection
 
-since v. 0.97:
-Mega and DUE:
-Need to use compiler directive -D Wiz5500 and https://github.com/anklimov/Ethernet2 library to compile with Wiznet 5500 instead 5100
-
-Prefered way to compile project is using platformio toolchain, suitable for Arduino Due, and Arduino Mega2560
-
-# Due compilation issue "USART0_Handler redefinition"
-Please, open  /variants/arduino_due_x/variant.cpp file, then add USART0_Handler method definition like this
-void USART0_Handler(void) __attribute__((weak));
-
-The normal path to find this file in platformio is:
-.platformio/packages/framework-arduinosam/variants/arduino_due_x
-
-# Platformio command line build instructions
-[First of all install platformio framework.]( http://docs.platformio.org/en/latest/installation.html)  [Good tutorial for fast start in RUSSIAN.](https://geektimes.ru/post/273852/)
-
-In linux\OSX you can open terminal, navigate to your programming directory, then
-
-```bash
- git clone https://github.com/anklimov/lighthub.git
- cd lighthub
- ```
-now prepare project files for your IDE
-```bash
-pio init --ide [atom|clion|codeblocks|eclipse|emacs|netbeans|qtcreator|sublimetext|vim|visualstudio|vscode]
-```
-Set custom build flags. first make your own copy of template
-```bash
-cp build_flags_template.sh my_build_flags.sh
-```
-then edit, change or comment unnecessary sections and source it
-```bash
-nano my_build_flags.sh
-source my_build_flags.sh
-```
-build and upload firmware for due|megaatmega2560|esp8266 board
-```bash
-pio run -e due|megaatmega2560|esp8266 -t upload
-```
-Clean pio libraries folder. Try it if you have compilation problem:
-```bash
-rm -Rf .piolibdeps
-```
-open COM-port monitor with specified baud rate
-```bash
-platformio device monitor -b 115200
-```
+**NRF52840** : Still early development stage
 
 # Custom build flags
 
@@ -144,24 +74,44 @@ platformio device monitor -b 115200
 * MODBUS_DISABLE // disable Modbus support
 * OWIRE_DISABLE // disable OneWire support
 * ARTNET_ENABLE //Enable Artnet protocol support
+* AVR_DMXOUT_PIN=18 // Set Pin for DMXOUT on megaatmega2560
 * CONTROLLINO //Change Modbus port, direction pins and Wiznet SS pins to be working on [Controllino](http://controllino.biz/)
+* LAN_INIT_DELAY=2000 // set lan init delay for Wiznet ethernet shield
+* ESP_WIFI_AP=MYAP // esp wifi access point name
+* ESP_WIFI_PWD=MYPWD // esp wifi access point password
+* WIFI_MANAGER_DISABLE //Disable wifi manager for esp8266
+* COUNTER_DISABLE //disable Counter, Uptime input support (for RAM savings on mega2560)
+* DHT_DISABLE //disable DHT input support (for RAM savings on mega2560)
+* RESTART_LAN_ON_MQTT_ERRORS //reinit LAN if many mqtt errors occured
+* DEVICE_NAME short handy device name which is used instead of mac for download config http://{MY_CONFIG_SERVER}/{DEVICE_NAME}_config.json
+* SYSLOG_ENABLE enable UDP SYSLOG support feature(under DEVELOPMENT) that must be configured through config file
+* WITH_PRINTEX_LIB use PrintEx library (develop experimental feature)
+* CSSHDC_DISABLE //Disable CS811 and HDC1080 sensors support
+
 
 
 # Default compilation behavior:
-* Config server: lazyhome.ru
+* Config server: lazyhome.ru (hosting of config files available for all registred users of portal - see MyDevices tab)
 * Watchdog enabled
 * 1-Wire communication with DS2482-100 I2C driver
 * No SD
 * Serial speed 115200
 * Wiznet 5100 (for MEGA & DUE)
 * Free Ram printing enabled
-* de:ad:be:ef:fe:00
+* de:ad:be:ef:fe:ff default MAC address for MEGA (on ESPx, DUE - using hardware defined MAC by default) 
 * DMX support enabled
 * Modbus support enabled
 * OneWire support enabled
 * Artnet disabled
-* Defailt MQTT input topic: /myhome/in
-* Default MQTT topic to publish device status: /myhome/s_out
-* Default Alarm output topic /alarm
+* LAN_INIT_DELAY=500 //ms
+* Defailt MQTT broadcast input topic: myhome/in
+* Default MQTT topic to publish device status: myhome/s_out
+* Default Alarm output topic: alarm
+* DHT, Counter, Uptime support enabled
+* Wifi manager for esp8266/esp32 enabled
+* RESTART_LAN_ON_MQTT_ERRORS disabled
+* DEVICE_NAME disabled
+* SYSLOG_ENABLE disabled
+* WITH_PRINTEX_LIB disabled, using Streaming library
+* CS811 and HDC1080 sensors support are enabled
 
-If you've using Arduino IDE to compile & flash firmware, it will use Default options above and you will not able to configure additional compilers options except edit "options.h" file

_config.yml

@@ -0,0 +1 @@
+theme: jekyll-theme-cayman

build-flags/build_flags_controllino

@@ -0,0 +1,2 @@
+-DCONTROLLINO
+-DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:07

build-flags/build_flags_due-5100

@@ -0,0 +1 @@
+#NO special flags

build-flags/build_flags_due-5500

@@ -0,0 +1,3 @@
+-DWiz5500
+-DARTNET_ENABLE
+-DDMX_SMOOTH

build-flags/build_flags_esp32-wifi

@@ -0,0 +1,9 @@
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+#-DM5STACK
+-DOTA

build-flags/build_flags_esp8266-wifi

@@ -0,0 +1,4 @@
+-DMODBUS_DISABLE
+#-DCOUNTER_DISABLE
+-DOTA
+-std=gnu++11

build-flags/build_flags_lighthub21

@@ -0,0 +1,6 @@
+-DWiz5500
+-DW5500_CS_PIN=53
+-DARTNET_ENABLE
+-DDMX_SMOOTH
+-DMODBUS_DIMMER_PARAM=SERIAL_8N1
+-DMODBUS_SERIAL_BAUD=9600

build-flags/build_flags_m5stack

@@ -0,0 +1,8 @@
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DM5STACK

build-flags/build_flags_mega2560-5100

@@ -0,0 +1,2 @@
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DAVR_DMXOUT_PIN=18

build-flags/build_flags_mega2560-5500

@@ -0,0 +1,3 @@
+-DWiz5500
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DAVR_DMXOUT_PIN=18

build-flags/build_flags_mega2560-slim-5100

@@ -0,0 +1,2 @@
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DAVR_DMXOUT_PIN=18

build-flags/build_flags_nrf52840-5500

@@ -0,0 +1,11 @@
+-DWiz5500
+#-DW5500_CS_PIN=10
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+#-DOWIRE_DISABLE
+-std=gnu++11
+-DWIFI_MANAGER_DISABLE
+-DCOUNTER_DISABLE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE

build-flags/build_flags_stm32-enc2860

@@ -0,0 +1,9 @@
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE

build-flags/build_flags_template

@@ -0,0 +1,33 @@
+
+# usage:
+# first make your own copy of template
+# cp build_flags_template build_flags_ENVNAME
+# then edit, change or comment something
+# place to custom-build-flags dir if you would like have your own private settings
+# -DMY_CONFIG_SERVER=lazyhome.ru
+# -DWATCH_DOG_TICKER_DISABLE
+# -DUSE_1W_PIN=12
+# -DSD_CARD_INSERTED
+# -DSERIAL_BAUD=115200
+# -DWiz5500
+# -DDISABLE_FREERAM_PRINT
+# -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:ff
+# -DDMX_DISABLE
+# -DMODBUS_DISABLE
+# -DOWIRE_DISABLE
+# -DAVR_DMXOUT_PIN=18
+# -DLAN_INIT_DELAY=2000
+# -DCONTROLLINO
+# -DESP_WIFI_AP=MYAP
+# -DESP_WIFI_PWD=MYPWD
+# -DWIFI_MANAGER_DISABLE
+# -DRESET_PIN=5
+# -DDHCP_RETRY_INTERVAL=60000
+# -DRESTART_LAN_ON_MQTT_ERRORS
+# -DW5500_CS_PIN=53
+# -DSYSLOG_ENABLE
+# -DDEVICE_NAME=MYDEVICE
+# -DDHT_DISABLE
+# -DCOUNTER_DISABLE
+# -DWITH_PRINTEX_LIB
+# -DCSSHDC_DISABLE

build_flags_template.sh

@@ -1,21 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh my_build_flags.sh
-# then edit, change or comment something
-# nano  my_build_flags.sh
-# and source it
-# source my_build_flags.sh
- export FLAGS="-DMY_CONFIG_SERVER=lazyhome.ru"
- export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
- export FLAGS="$FLAGS -DWiz5500"
- export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:00"
- export FLAGS="$FLAGS -DDMX_DISABLE"
- export FLAGS="$FLAGS -DMODBUS_DISABLE"
- export FLAGS="$FLAGS -DOWIRE_DISABLE"
- export PLATFORMIO_BUILD_FLAGS="$FLAGS"
- unset FLAGS

compiled/DUE_16u2_reflash/16u2.hex

@@ -0,0 +1,273 @@
+:10000000A7C00000C0C00000BEC00000BCC000000F
+:10001000BAC00000B8C00000B6C00000B4C0000004
+:10002000B2C00000B0C00000AEC00000C1C40000FB
+:1000300085C40000A8C00000A6C00000A4C0000045
+:10004000A2C00000A0C000009EC000009CC0000034
+:100050009AC0000098C0000096C0000021C10000B6
+:1000600092C0000090C000008EC000008CC0000054
+:100070008AC0000088C0000086C0000084C0000064
+:1000800082C0000080C000007EC000007CC0000074
+:100090007AC0000078C000001201100102000008C0
+:1000A00041233D0001000102DC0109023E00020182
+:1000B00000C0320904000001020201000524000111
+:1000C0001004240206052406000107058203080027
+:1000D000FF09040100020A000000070504024000B5
+:1000E00001070583024000010403090432034100B3
+:1000F00072006400750069006E006F002000280027
+:100100007700770077002E006100720064007500B0
+:1001100069006E006F002E0063006300290000007C
+:100120002E03410072006400750069006E006F00CC
+:1001300020004400750065002000500072006F0030
+:1001400067002E00200050006F0072007400000055
+:1001500011241FBECFEFD2E0DEBFCDBF11E0A0E083
+:10016000B1E0E4EDF0E102C005900D92A831B107D5
+:10017000D9F712E0A8E1B1E001C01D92A833B107A0
+:10018000E1F72BD1A5C73CCF9C01DC01AE57BF4F97
+:10019000ED91FC91119741911196FC93EE9380584B
+:1001A0009F4FE817F90711F42D933C939FB7F894EC
+:1001B000F901EC57FF4F8081815080839FBF842FCE
+:1001C0000895882311F03F9A01C03F9847980895F9
+:1001D000882311F046980895469A0895DF92EF9289
+:1001E000FF920F931F93FC018489813019F08230B4
+:1001F00019F404C010E303C010E001C010E28389C9
+:10020000823009F418608589873031F0883031F008
+:10021000863029F4126003C0146001C01660109289
+:10022000C9001092C8001092CA000785F088E188C2
+:10023000D288202F3F2D4E2D5D2D10921E01203B88
+:1002400084E0380780E0480780E0580719F481E02F
+:1002500080931E01CA01B90122E030E040E050E085
+:100260001CD720583B47414E5F4FCA01B901202F90
+:100270003F2D4E2D5D2DEFD6215030403093CD00D7
+:100280002093CC001093CA0082E08093C80088E9D4
+:100290008093C9001F910F91FF90EF90DF90089518
+:1002A0001F920F920FB60F9211242F938F939F934B
+:1002B000EF93FF939091CE008EB38430F1F4E091F0
+:1002C000A201F091A3019083E091A201F091A3011A
+:1002D000CF0101969093A3018093A201825A91408D
+:1002E00021F482E291E0928381839FB7F894809118
+:1002F000A6018F5F8093A6019FBFFF91EF919F9111
+:100300008F912F910F900FBE0F901F901895FC01A9
+:1003100040911A0140931B0180911C0180931D01A3
+:100320008585282F30E02170307020931A01858553
+:1003300090E096958795817080931C0180911E01B5
+:10034000882339F088E790E0909319018093180191
+:100350000895442341F4222331F082E390E0909306
+:10036000190180931801089580E091E00AC680E0A9
+:1003700091E0BDC584B7877F84BF88E10FB6F8944C
+:1003800080936000109260000FBE81E01ADF16BCFF
+:1003900083E085BD86B58831E8F315BC16BC80E0E6
+:1003A00010DF469A3E9A87E690E09093CD008093C6
+:1003B000CC0086E08093CA001092C80088E1809348
+:1003C000C900539A5A9A8AB180638AB98BB1806303
+:1003D0008BB9A9D284E085BD08950F931F93CF9365
+:1003E000DF93C8DF2FB7F89487EA91E09093280253
+:1003F0008093270290932A02809329022FBF2FB760
+:10040000F89482E291E09093A3018093A2019093EB
+:10041000A5018093A4012FBF7894C7EAD1E003E03F
+:100420008FB7F89490912B028FBF903809F180E03C
+:1004300091E0D3D497FD1CC0E0912702F0912802EF
+:100440008083E0912702F0912802CF0101969093DA
+:100450002802809327028752924011F4D283C183ED
+:100460009FB7F89480912B028F5F80932B029FBFE0
+:100470008FB7F8941091A6018FBFA89903C01136C9
+:1004800008F456C0A89A8091A601882361F05D986F
+:1004900000931F0108C082E291E076DE682F80E0C1
+:1004A00091E001D511501123B1F780911F018823EC
+:1004B00051F080911F01815080931F0180911F0195
+:1004C000882309F45D9A80912001882351F080915E
+:1004D000200181508093200180912001882309F41C
+:1004E0005C9A809118019091190118161906E4F48C
+:1004F000CC97CD9710F481E001C080E069DE809157
+:100500001801909119010197C29710F481E001C080
+:1005100080E057DE80911801909119010197909326
+:1005200019018093180104C080E052DE80E049DEAA
+:100530008FB7F89490912B028FBF992369F087EAC7
+:1005400091E022DE982F8091C80085FFFCCF909328
+:10055000CE005C980093200180E091E095D42AD4ED
+:100560005FCFDA01923049F0933061F09130F9F4C5
+:10057000E8E9F0E022E130E01EC0EAEAF0E02EE334
+:1005800030E019C0813049F0813018F0823079F4C0
+:1005900008C0E8EEF0E0849107C0ECEEF0E0849152
+:1005A00003C0E0E2F1E08491282F30E004C0E0E0F5
+:1005B000F0E020E030E0ED93FC93C901089528E0DD
+:1005C00030E040E003C04F5F220F331F2817390788
+:1005D000D0F3842F8295807F08958093E9008091E5
+:1005E000EB0081608093EB001092ED006093EC00D3
+:1005F0004093ED008091EE00881F8827881F0895A2
+:100600001092F40090E09093E9001092F0001092A4
+:10061000E8001092ED008091EB008E7F8093EB005C
+:100620009F5F953081F708958091300288238CF484
+:1006300003C08EB38823B1F08091E80082FFF9CF28
+:100640008091E8008B778093E80008958EB388232B
+:1006500049F08091E80080FFF9CF8091E8008E7723
+:100660008093E800089594E68091EC0080FF05C037
+:100670008091E80080FF05C023C08091E80082FDE2
+:100680001FC08EB3882311F482E008958EB38530A5
+:1006900011F483E008958091EB0085FF02C081E0B2
+:1006A00008958091E10082FFDFCF8091E1008B7F90
+:1006B0008093E100992311F484E008959150D4CF00
+:1006C00080E008959C014091360250913702461710
+:1006D000570718F4F90120E038C06115710511F0D1
+:1006E000AB01F8CF8091E8008E778093E80040E07E
+:1006F00050E0F0CF8091E80083FF02C081E00895D0
+:100700008091E80082FD2DC08EB3882381F18EB3E5
+:10071000853079F18091E80080FF17C09091F20058
+:1007200006C081918093F100415050409F5F411578
+:10073000510511F09830A8F320E0983009F421E039
+:100740008091E8008E778093E8004115510591F67D
+:10075000222381F606C08EB3882349F08EB38530FC
+:1007600041F08091E80082FFF6CF80E0089582E0BA
+:10077000089583E008959C0140913602509137021C
+:100780004617570710F490E03BC06115710511F052
+:10079000AB01F9CF8091E8008E778093E80040E0CC
+:1007A00050E0F1CF8091E80083FF02C081E008951E
+:1007B0008091E80082FD30C08EB3882399F18EB31A
+:1007C000853091F18091E80080FF1AC08091F2009D
+:1007D00009C0F9012F5F3F4FE491E093F1004150D0
+:1007E00050408F5F4115510511F0883090F390E033
+:1007F000883009F491E08091E8008E778093E800DA
+:100800004115510579F6992369F606C08EB3882300
+:1008100049F08EB3853041F08091E80082FFF6CF39
+:1008200080E0089582E0089583E008959C016115B9
+:10083000710529F48091E8008B778093E800F90135
+:1008400020C08091E80083FF02C081E008958EB34C
+:10085000882339F18EB3853031F18091E80082FF31
+:10086000F0CF06C08091F10081936150704021F07B
+:100870008091F2008823B1F78091E8008B77809314
+:10088000E80061157105E9F606C08EB3882349F0CA
+:100890008EB3853041F08091E80080FFF6CF80E094
+:1008A000089582E0089583E0089542D044D01EBAAE
+:1008B00010922E0210922D0210922C0284E089BD1B
+:1008C00089B5826089BD09B400FEFDCF8091D80052
+:1008D000982F9F779093D80080688093D80080915C
+:1008E00063008E7F809363008091D8008F7D80931A
+:1008F000D8008091E0008E7F8093E0008091E1003D
+:100900008E7F8093E1008091E20081608093E2001D
+:100910008091E100877F8093E1008091E200886010
+:100920008093E2000895C1DF81E080932F02089553
+:100930001092E20008951092E10008951F920F9224
+:100940000FB60F9211241F932F933F934F935F93F2
+:100950006F937F938F939F93AF93BF93EF93FF9387
+:10096000E9EEF0E0108117701082E0EFF0E0808196
+:10097000877F80837894C3D0F894A9EEB0E01C926E
+:10098000E0EFF0E08081886080831C93FF91EF911D
+:10099000BF91AF919F918F917F916F915F914F9197
+:1009A0003F912F911F910F900FBE0F901F901895A0
+:1009B0001F920F920FB60F9211242F933F934F93D4
+:1009C0005F936F937F938F939F93AF93BF93EF93B7
+:1009D000FF938091E10080FF1BC08091E20080FFC7
+:1009E00017C08091E1008E7F8093E1008091E2004A
+:1009F0008E7F8093E2008091E20080618093E2002C
+:100A00008091D80080628093D80019BC1EBAD1D1E1
+:100A10008091E10084FF29C08091E20084FF25C01D
+:100A200084E089BD89B5826089BD09B400FEFDCF2F
+:100A30008091D8008F7D8093D8008091E1008F7ED7
+:100A40008093E1008091E2008F7E8093E2008091AC
+:100A5000E20081608093E20080912E02882311F4ED
+:100A600081E001C084E08EBBA4D18091E10083FFCE
+:100A700027C08091E20083FF23C08091E100877F3F
+:100A80008093E10082E08EBB10922E028091E10003
+:100A90008E7F8093E1008091E2008E7F8093E20060
+:100AA0008091E20080618093E200AADD80E060E056
+:100AB00042E093DD8091F00088608093F00079D16E
+:100AC0008091E10082FF0AC08091E20082FF06C0AF
+:100AD0008091E1008B7F8093E1006BD1FF91EF91DA
+:100AE000BF91AF919F918F917F916F915F914F9146
+:100AF0003F912F910F900FBE0F901F9018951F934D
+:100B0000DF93CF93CDB7DEB7AC970FB6F894DEBFC7
+:100B10000FBECDBFE0E3F2E08091F100819322E0CF
+:100B2000E833F207C9F78091300230913102353055
+:100B300009F487C0363040F43130C9F1313070F0FB
+:100B4000333009F01DC133C0383009F4EFC03930FB
+:100B500009F4FEC0363009F013C192C0803821F08C
+:100B6000823809F00DC108C090912C0280912D02AD
+:100B7000882399F0926011C080913402877080932D
+:100B8000E9008091EB0090E025E0969587952A9505
+:100B9000E1F7982F91701092E9008091E800877F2B
+:100BA0008093E8009093F1001092F100CAC088236E
+:100BB00019F0823009F0E4C090E08F7190700097D6
+:100BC00021F0029709F0DDC00CC080913202813023
+:100BD00009F0D7C010922D02333069F580932D02B1
+:100BE0002AC080913202882331F520913402277087
+:100BF00009F4C7C02093E9008091EB0080FFC1C0D9
+:100C0000333021F48091EB00806213C08091EB00BF
+:100C100080618093EB0081E090E002C0880F991F13
+:100C20002A95E2F78093EA001092EA008091EB00A7
+:100C300088608093EB001092E9008091E800877F44
+:100C400083C0882309F09CC0109132028091E80093
+:100C5000877F8093E800E8DC04C08EB3882309F422
+:100C600090C08091E80080FFF8CF812F8F7711F43A
+:100C700092E001C093E09EBB80688093E30081C056
+:100C80008058823008F07CC080913202909133020B
+:100C900023E08C3D920799F55FB7F894DE01159635
+:100CA0004EE020E030E061E2E42FF0E06093570096
+:100CB000849120FF03C082958F704F5F982F9F70A3
+:100CC000892F805D8A3308F0895F8C9311961C927E
+:100CD00011972F5F3F4F12962431310529F75FBFDF
+:100CE0008AE28B8383E08C838091E800877F809306
+:100CF000E800CE0103966AE270E0E4DC11C0609186
+:100D00003402AE014F5F5F4F2CDCBC010097C9F18C
+:100D10008091E800877F8093E80089819A812BDDAC
+:100D20008091E8008B778093E8002BC0803841F5F4
+:100D30008091E800877F8093E80080912E02809365
+:100D4000F1008091E8008E778093E8006DDC19C097
+:100D50008823B1F490913202923098F48091E800A7
+:100D6000877F8093E80090932E025EDC80912E02B4
+:100D7000882311F483E001C084E08EBBF8DA01C05F
+:100D8000F3DA8091E80083FF0AC08091EB00806273
+:100D90008093EB008091E800877F8093E800AC9619
+:100DA0000FB6F894DEBF0FBECDBFCF91DF911F917C
+:100DB000089508951F938EB3882361F01091E90080
+:100DC0001092E9008091E80083FF01C098DE17705F
+:100DD0001093E9001F9108950895FC018EB38430AB
+:100DE00021F587859089A189B2890097A105B10570
+:100DF000E1F085818093E9008091E80082FF15C0D1
+:100E00008091F200882319F42FEF3FEF04C0809106
+:100E1000F100282F30E08091F200882341F4809186
+:100E2000E8008B778093E80002C02FEF3FEFC90105
+:100E30000895FC018EB3843011F587859089A189CE
+:100E4000B2890097A105B105D1F081818093E900B5
+:100E50008091F2008823A9F09091E8008091E80049
+:100E60008E778093E80095FD0CC0FDDB982F8823DA
+:100E700049F48091E8008E778093E80003C092E007
+:100E800001C090E0892F0895FC018EB3843051F4A5
+:100E900087859089A189B2890097A105B10511F0D4
+:100EA000CF01C7CF08951F93FC01162F8EB3843056
+:100EB000D9F487859089A189B2890097A105B105E8
+:100EC00099F081818093E9008091E80085FD08C058
+:100ED0008091E8008E778093E800C5DB882329F4B1
+:100EE0001093F10080E001C082E01F9108950F93FC
+:100EF0001F93CF93DF93EC010D96FC0189E0DF0196
+:100F00001D928A95E9F72A813B8109818C8188238A
+:100F100011F410E001C014E0C90151DB182B12607C
+:100F2000802F61E8412F59DB882329F12E813F81F1
+:100F30000D818885882311F410E001C014E0C901F7
+:100F40003EDB182B1260802F60E8412F46DB8823A0
+:100F500091F02A853B8509858C85882311F410E062
+:100F600001C014E0C9012BDB182B1260802F61EC4B
+:100F7000412F33DB01C080E0DF91CF911F910F91B2
+:100F80000895CF93DF93EC018091E80083FF60C068
+:100F9000888190E02091340230913502281739077A
+:100FA00009F056C080913102813261F0823220F422
+:100FB000803209F04DC019C0823269F1833209F0E4
+:100FC00047C038C080913002813A09F041C0809119
+:100FD000E800877F8093E800CE010F9667E070E01D
+:100FE00071DB8091E8008B7713C0809130028132F1
+:100FF00079F58091E800877F8093E800CE010F9615
+:1010000067E070E013DCCE01E9D88091E8008E77CC
+:101010008093E8001DC0809130028132C9F4809134
+:10102000E800877F8093E800809132028D87CE01AF
+:101030006ED90DC080913002813251F48091E80068
+:10104000877F8093E800CE0160913202C5DEECDA42
+:10105000DF91CF910895A1E21A2EAA1BBB1BFD01BF
+:101060000DC0AA1FBB1FEE1FFF1FA217B307E40787
+:10107000F50720F0A21BB30BE40BF50B661F771FDF
+:10108000881F991F1A9469F76095709580959095BF
+:101090009B01AC01BD01CF01089597FB092E0526E8
+:1010A0000ED057FD04D0D7DF0AD0001C38F450957D
+:1010B0004095309521953F4F4F4F5F4F0895F6F77C
+:1010C00090958095709561957F4F8F4F9F4F0895B4
+:0410D000F894FFCFC2
+:1010D400000340000004400000020800000000007B
+:0810E4000000000000001400F0
+:00000001FF

compiled/DUE_16u2_reflash/reflash16u2DUE.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14101 -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i

compiled/controllino/upload.bat

@@ -0,0 +1 @@
+..\tools\win\tool-avrdude\avrdude -C ../tools/mac/tool-avrdude/avrdude.conf  -v -V -P com3 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/controllino/upload.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -v -V -P /dev/cu.usbmodem1411 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/due-5100/upload.bat

@@ -0,0 +1,3 @@
+mode com3:1200,n,8,1
+pause
+..\tools\win\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b firmware.bin -R 

compiled/due-5100/upload.sh

@@ -0,0 +1,3 @@
+export PORT=cu.usbmodem1451
+echo . |  stty -f /dev/$PORT speed 1200
+../tools/mac/tool-bossac/bossac -U false -p $PORT -i -e -w -v -b firmware.bin -R 

compiled/due-5500/upload.bat

@@ -0,0 +1,3 @@
+mode com3:1200,n,8,1
+pause
+..\tools\win\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b firmware.bin -R 

compiled/due-5500/upload.sh

@@ -0,0 +1,3 @@
+export PORT=cu.usbmodem14201
+echo . |  stty -f /dev/$PORT speed 1200
+../tools/mac/tool-bossac/bossac -U false -p $PORT -i -e -w -v -b firmware.bin -R 

compiled/lighthub21/upload.bat

@@ -0,0 +1,3 @@
+mode com3:1200,n,8,1
+pause
+..\tools\win\tool-bossac\bossac.exe -i --port=com3 -U false -e -w -v -b firmware.bin -R 

compiled/lighthub21/upload.sh

@@ -0,0 +1,3 @@
+export PORT=cu.usbmodem1451
+echo . |  stty -f /dev/$PORT speed 1200
+../tools/mac/tool-bossac/bossac -U false -p $PORT -i -e -w -v -b firmware.bin -R 

compiled/mega2560-5100/upload.bat

@@ -0,0 +1 @@
+..\tools\win\tool-avrdude\avrdude -C ../tools/mac/tool-avrdude/avrdude.conf  -v -V -P com3 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/mega2560-5100/upload.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -v -V -P /dev/cu.usbmodem1411 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/mega2560-5500/upload.bat

@@ -0,0 +1 @@
+..\tools\win\tool-avrdude\avrdude -C ../tools/mac/tool-avrdude/avrdude.conf  -v -V -P com3 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/mega2560-5500/upload.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -v -V -P /dev/cu.usbmodem1411 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/mega2560slim-5100/upload.bat

@@ -0,0 +1 @@
+..\tools\win\tool-avrdude\avrdude -C ../tools/mac/tool-avrdude/avrdude.conf  -v -V -P com3 -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/mega2560slim-5100/upload.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -P /dev/cu.wchusbserial1450 -v -V  -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/monitor.bat

@@ -0,0 +1 @@
+pio device monitor -b 115200

compiled/tools/DUE_16u2_reflash/16u2.hex

@@ -0,0 +1,273 @@
+:10000000A7C00000C0C00000BEC00000BCC000000F
+:10001000BAC00000B8C00000B6C00000B4C0000004
+:10002000B2C00000B0C00000AEC00000C1C40000FB
+:1000300085C40000A8C00000A6C00000A4C0000045
+:10004000A2C00000A0C000009EC000009CC0000034
+:100050009AC0000098C0000096C0000021C10000B6
+:1000600092C0000090C000008EC000008CC0000054
+:100070008AC0000088C0000086C0000084C0000064
+:1000800082C0000080C000007EC000007CC0000074
+:100090007AC0000078C000001201100102000008C0
+:1000A00041233D0001000102DC0109023E00020182
+:1000B00000C0320904000001020201000524000111
+:1000C0001004240206052406000107058203080027
+:1000D000FF09040100020A000000070504024000B5
+:1000E00001070583024000010403090432034100B3
+:1000F00072006400750069006E006F002000280027
+:100100007700770077002E006100720064007500B0
+:1001100069006E006F002E0063006300290000007C
+:100120002E03410072006400750069006E006F00CC
+:1001300020004400750065002000500072006F0030
+:1001400067002E00200050006F0072007400000055
+:1001500011241FBECFEFD2E0DEBFCDBF11E0A0E083
+:10016000B1E0E4EDF0E102C005900D92A831B107D5
+:10017000D9F712E0A8E1B1E001C01D92A833B107A0
+:10018000E1F72BD1A5C73CCF9C01DC01AE57BF4F97
+:10019000ED91FC91119741911196FC93EE9380584B
+:1001A0009F4FE817F90711F42D933C939FB7F894EC
+:1001B000F901EC57FF4F8081815080839FBF842FCE
+:1001C0000895882311F03F9A01C03F9847980895F9
+:1001D000882311F046980895469A0895DF92EF9289
+:1001E000FF920F931F93FC018489813019F08230B4
+:1001F00019F404C010E303C010E001C010E28389C9
+:10020000823009F418608589873031F0883031F008
+:10021000863029F4126003C0146001C01660109289
+:10022000C9001092C8001092CA000785F088E188C2
+:10023000D288202F3F2D4E2D5D2D10921E01203B88
+:1002400084E0380780E0480780E0580719F481E02F
+:1002500080931E01CA01B90122E030E040E050E085
+:100260001CD720583B47414E5F4FCA01B901202F90
+:100270003F2D4E2D5D2DEFD6215030403093CD00D7
+:100280002093CC001093CA0082E08093C80088E9D4
+:100290008093C9001F910F91FF90EF90DF90089518
+:1002A0001F920F920FB60F9211242F938F939F934B
+:1002B000EF93FF939091CE008EB38430F1F4E091F0
+:1002C000A201F091A3019083E091A201F091A3011A
+:1002D000CF0101969093A3018093A201825A91408D
+:1002E00021F482E291E0928381839FB7F894809118
+:1002F000A6018F5F8093A6019FBFFF91EF919F9111
+:100300008F912F910F900FBE0F901F901895FC01A9
+:1003100040911A0140931B0180911C0180931D01A3
+:100320008585282F30E02170307020931A01858553
+:1003300090E096958795817080931C0180911E01B5
+:10034000882339F088E790E0909319018093180191
+:100350000895442341F4222331F082E390E0909306
+:10036000190180931801089580E091E00AC680E0A9
+:1003700091E0BDC584B7877F84BF88E10FB6F8944C
+:1003800080936000109260000FBE81E01ADF16BCFF
+:1003900083E085BD86B58831E8F315BC16BC80E0E6
+:1003A00010DF469A3E9A87E690E09093CD008093C6
+:1003B000CC0086E08093CA001092C80088E1809348
+:1003C000C900539A5A9A8AB180638AB98BB1806303
+:1003D0008BB9A9D284E085BD08950F931F93CF9365
+:1003E000DF93C8DF2FB7F89487EA91E09093280253
+:1003F0008093270290932A02809329022FBF2FB760
+:10040000F89482E291E09093A3018093A2019093EB
+:10041000A5018093A4012FBF7894C7EAD1E003E03F
+:100420008FB7F89490912B028FBF903809F180E03C
+:1004300091E0D3D497FD1CC0E0912702F0912802EF
+:100440008083E0912702F0912802CF0101969093DA
+:100450002802809327028752924011F4D283C183ED
+:100460009FB7F89480912B028F5F80932B029FBFE0
+:100470008FB7F8941091A6018FBFA89903C01136C9
+:1004800008F456C0A89A8091A601882361F05D986F
+:1004900000931F0108C082E291E076DE682F80E0C1
+:1004A00091E001D511501123B1F780911F018823EC
+:1004B00051F080911F01815080931F0180911F0195
+:1004C000882309F45D9A80912001882351F080915E
+:1004D000200181508093200180912001882309F41C
+:1004E0005C9A809118019091190118161906E4F48C
+:1004F000CC97CD9710F481E001C080E069DE809157
+:100500001801909119010197C29710F481E001C080
+:1005100080E057DE80911801909119010197909326
+:1005200019018093180104C080E052DE80E049DEAA
+:100530008FB7F89490912B028FBF992369F087EAC7
+:1005400091E022DE982F8091C80085FFFCCF909328
+:10055000CE005C980093200180E091E095D42AD4ED
+:100560005FCFDA01923049F0933061F09130F9F4C5
+:10057000E8E9F0E022E130E01EC0EAEAF0E02EE334
+:1005800030E019C0813049F0813018F0823079F4C0
+:1005900008C0E8EEF0E0849107C0ECEEF0E0849152
+:1005A00003C0E0E2F1E08491282F30E004C0E0E0F5
+:1005B000F0E020E030E0ED93FC93C901089528E0DD
+:1005C00030E040E003C04F5F220F331F2817390788
+:1005D000D0F3842F8295807F08958093E9008091E5
+:1005E000EB0081608093EB001092ED006093EC00D3
+:1005F0004093ED008091EE00881F8827881F0895A2
+:100600001092F40090E09093E9001092F0001092A4
+:10061000E8001092ED008091EB008E7F8093EB005C
+:100620009F5F953081F708958091300288238CF484
+:1006300003C08EB38823B1F08091E80082FFF9CF28
+:100640008091E8008B778093E80008958EB388232B
+:1006500049F08091E80080FFF9CF8091E8008E7723
+:100660008093E800089594E68091EC0080FF05C037
+:100670008091E80080FF05C023C08091E80082FDE2
+:100680001FC08EB3882311F482E008958EB38530A5
+:1006900011F483E008958091EB0085FF02C081E0B2
+:1006A00008958091E10082FFDFCF8091E1008B7F90
+:1006B0008093E100992311F484E008959150D4CF00
+:1006C00080E008959C014091360250913702461710
+:1006D000570718F4F90120E038C06115710511F0D1
+:1006E000AB01F8CF8091E8008E778093E80040E07E
+:1006F00050E0F0CF8091E80083FF02C081E00895D0
+:100700008091E80082FD2DC08EB3882381F18EB3E5
+:10071000853079F18091E80080FF17C09091F20058
+:1007200006C081918093F100415050409F5F411578
+:10073000510511F09830A8F320E0983009F421E039
+:100740008091E8008E778093E8004115510591F67D
+:10075000222381F606C08EB3882349F08EB38530FC
+:1007600041F08091E80082FFF6CF80E0089582E0BA
+:10077000089583E008959C0140913602509137021C
+:100780004617570710F490E03BC06115710511F052
+:10079000AB01F9CF8091E8008E778093E80040E0CC
+:1007A00050E0F1CF8091E80083FF02C081E008951E
+:1007B0008091E80082FD30C08EB3882399F18EB31A
+:1007C000853091F18091E80080FF1AC08091F2009D
+:1007D00009C0F9012F5F3F4FE491E093F1004150D0
+:1007E00050408F5F4115510511F0883090F390E033
+:1007F000883009F491E08091E8008E778093E800DA
+:100800004115510579F6992369F606C08EB3882300
+:1008100049F08EB3853041F08091E80082FFF6CF39
+:1008200080E0089582E0089583E008959C016115B9
+:10083000710529F48091E8008B778093E800F90135
+:1008400020C08091E80083FF02C081E008958EB34C
+:10085000882339F18EB3853031F18091E80082FF31
+:10086000F0CF06C08091F10081936150704021F07B
+:100870008091F2008823B1F78091E8008B77809314
+:10088000E80061157105E9F606C08EB3882349F0CA
+:100890008EB3853041F08091E80080FFF6CF80E094
+:1008A000089582E0089583E0089542D044D01EBAAE
+:1008B00010922E0210922D0210922C0284E089BD1B
+:1008C00089B5826089BD09B400FEFDCF8091D80052
+:1008D000982F9F779093D80080688093D80080915C
+:1008E00063008E7F809363008091D8008F7D80931A
+:1008F000D8008091E0008E7F8093E0008091E1003D
+:100900008E7F8093E1008091E20081608093E2001D
+:100910008091E100877F8093E1008091E200886010
+:100920008093E2000895C1DF81E080932F02089553
+:100930001092E20008951092E10008951F920F9224
+:100940000FB60F9211241F932F933F934F935F93F2
+:100950006F937F938F939F93AF93BF93EF93FF9387
+:10096000E9EEF0E0108117701082E0EFF0E0808196
+:10097000877F80837894C3D0F894A9EEB0E01C926E
+:10098000E0EFF0E08081886080831C93FF91EF911D
+:10099000BF91AF919F918F917F916F915F914F9197
+:1009A0003F912F911F910F900FBE0F901F901895A0
+:1009B0001F920F920FB60F9211242F933F934F93D4
+:1009C0005F936F937F938F939F93AF93BF93EF93B7
+:1009D000FF938091E10080FF1BC08091E20080FFC7
+:1009E00017C08091E1008E7F8093E1008091E2004A
+:1009F0008E7F8093E2008091E20080618093E2002C
+:100A00008091D80080628093D80019BC1EBAD1D1E1
+:100A10008091E10084FF29C08091E20084FF25C01D
+:100A200084E089BD89B5826089BD09B400FEFDCF2F
+:100A30008091D8008F7D8093D8008091E1008F7ED7
+:100A40008093E1008091E2008F7E8093E2008091AC
+:100A5000E20081608093E20080912E02882311F4ED
+:100A600081E001C084E08EBBA4D18091E10083FFCE
+:100A700027C08091E20083FF23C08091E100877F3F
+:100A80008093E10082E08EBB10922E028091E10003
+:100A90008E7F8093E1008091E2008E7F8093E20060
+:100AA0008091E20080618093E200AADD80E060E056
+:100AB00042E093DD8091F00088608093F00079D16E
+:100AC0008091E10082FF0AC08091E20082FF06C0AF
+:100AD0008091E1008B7F8093E1006BD1FF91EF91DA
+:100AE000BF91AF919F918F917F916F915F914F9146
+:100AF0003F912F910F900FBE0F901F9018951F934D
+:100B0000DF93CF93CDB7DEB7AC970FB6F894DEBFC7
+:100B10000FBECDBFE0E3F2E08091F100819322E0CF
+:100B2000E833F207C9F78091300230913102353055
+:100B300009F487C0363040F43130C9F1313070F0FB
+:100B4000333009F01DC133C0383009F4EFC03930FB
+:100B500009F4FEC0363009F013C192C0803821F08C
+:100B6000823809F00DC108C090912C0280912D02AD
+:100B7000882399F0926011C080913402877080932D
+:100B8000E9008091EB0090E025E0969587952A9505
+:100B9000E1F7982F91701092E9008091E800877F2B
+:100BA0008093E8009093F1001092F100CAC088236E
+:100BB00019F0823009F0E4C090E08F7190700097D6
+:100BC00021F0029709F0DDC00CC080913202813023
+:100BD00009F0D7C010922D02333069F580932D02B1
+:100BE0002AC080913202882331F520913402277087
+:100BF00009F4C7C02093E9008091EB0080FFC1C0D9
+:100C0000333021F48091EB00806213C08091EB00BF
+:100C100080618093EB0081E090E002C0880F991F13
+:100C20002A95E2F78093EA001092EA008091EB00A7
+:100C300088608093EB001092E9008091E800877F44
+:100C400083C0882309F09CC0109132028091E80093
+:100C5000877F8093E800E8DC04C08EB3882309F422
+:100C600090C08091E80080FFF8CF812F8F7711F43A
+:100C700092E001C093E09EBB80688093E30081C056
+:100C80008058823008F07CC080913202909133020B
+:100C900023E08C3D920799F55FB7F894DE01159635
+:100CA0004EE020E030E061E2E42FF0E06093570096
+:100CB000849120FF03C082958F704F5F982F9F70A3
+:100CC000892F805D8A3308F0895F8C9311961C927E
+:100CD00011972F5F3F4F12962431310529F75FBFDF
+:100CE0008AE28B8383E08C838091E800877F809306
+:100CF000E800CE0103966AE270E0E4DC11C0609186
+:100D00003402AE014F5F5F4F2CDCBC010097C9F18C
+:100D10008091E800877F8093E80089819A812BDDAC
+:100D20008091E8008B778093E8002BC0803841F5F4
+:100D30008091E800877F8093E80080912E02809365
+:100D4000F1008091E8008E778093E8006DDC19C097
+:100D50008823B1F490913202923098F48091E800A7
+:100D6000877F8093E80090932E025EDC80912E02B4
+:100D7000882311F483E001C084E08EBBF8DA01C05F
+:100D8000F3DA8091E80083FF0AC08091EB00806273
+:100D90008093EB008091E800877F8093E800AC9619
+:100DA0000FB6F894DEBF0FBECDBFCF91DF911F917C
+:100DB000089508951F938EB3882361F01091E90080
+:100DC0001092E9008091E80083FF01C098DE17705F
+:100DD0001093E9001F9108950895FC018EB38430AB
+:100DE00021F587859089A189B2890097A105B10570
+:100DF000E1F085818093E9008091E80082FF15C0D1
+:100E00008091F200882319F42FEF3FEF04C0809106
+:100E1000F100282F30E08091F200882341F4809186
+:100E2000E8008B778093E80002C02FEF3FEFC90105
+:100E30000895FC018EB3843011F587859089A189CE
+:100E4000B2890097A105B105D1F081818093E900B5
+:100E50008091F2008823A9F09091E8008091E80049
+:100E60008E778093E80095FD0CC0FDDB982F8823DA
+:100E700049F48091E8008E778093E80003C092E007
+:100E800001C090E0892F0895FC018EB3843051F4A5
+:100E900087859089A189B2890097A105B10511F0D4
+:100EA000CF01C7CF08951F93FC01162F8EB3843056
+:100EB000D9F487859089A189B2890097A105B105E8
+:100EC00099F081818093E9008091E80085FD08C058
+:100ED0008091E8008E778093E800C5DB882329F4B1
+:100EE0001093F10080E001C082E01F9108950F93FC
+:100EF0001F93CF93DF93EC010D96FC0189E0DF0196
+:100F00001D928A95E9F72A813B8109818C8188238A
+:100F100011F410E001C014E0C90151DB182B12607C
+:100F2000802F61E8412F59DB882329F12E813F81F1
+:100F30000D818885882311F410E001C014E0C901F7
+:100F40003EDB182B1260802F60E8412F46DB8823A0
+:100F500091F02A853B8509858C85882311F410E062
+:100F600001C014E0C9012BDB182B1260802F61EC4B
+:100F7000412F33DB01C080E0DF91CF911F910F91B2
+:100F80000895CF93DF93EC018091E80083FF60C068
+:100F9000888190E02091340230913502281739077A
+:100FA00009F056C080913102813261F0823220F422
+:100FB000803209F04DC019C0823269F1833209F0E4
+:100FC00047C038C080913002813A09F041C0809119
+:100FD000E800877F8093E800CE010F9667E070E01D
+:100FE00071DB8091E8008B7713C0809130028132F1
+:100FF00079F58091E800877F8093E800CE010F9615
+:1010000067E070E013DCCE01E9D88091E8008E77CC
+:101010008093E8001DC0809130028132C9F4809134
+:10102000E800877F8093E800809132028D87CE01AF
+:101030006ED90DC080913002813251F48091E80068
+:10104000877F8093E800CE0160913202C5DEECDA42
+:10105000DF91CF910895A1E21A2EAA1BBB1BFD01BF
+:101060000DC0AA1FBB1FEE1FFF1FA217B307E40787
+:10107000F50720F0A21BB30BE40BF50B661F771FDF
+:10108000881F991F1A9469F76095709580959095BF
+:101090009B01AC01BD01CF01089597FB092E0526E8
+:1010A0000ED057FD04D0D7DF0AD0001C38F450957D
+:1010B0004095309521953F4F4F4F5F4F0895F6F77C
+:1010C00090958095709561957F4F8F4F9F4F0895B4
+:0410D000F894FFCFC2
+:1010D400000340000004400000020800000000007B
+:0810E4000000000000001400F0
+:00000001FF

compiled/tools/DUE_16u2_reflash/readme.md

@@ -0,0 +1,2 @@
+This package need if you have problem with unrelable cold start of Arduino DUE
+Arduino ISP should be connected to 16u2 ICSP connector before run

compiled/tools/DUE_16u2_reflash/reflash16u2DUE.sh

@@ -0,0 +1 @@
+../../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem1411 -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i

compiled/tools/mac/tool-avrdude/libavrdude.dylib

@@ -0,0 +1 @@
+libavrdude.1.dylib

compiled/tools/mac/tool-avrdude/libavrdude.la

@@ -0,0 +1,41 @@
+# libavrdude.la - a libtool library file
+# Generated by libtool (GNU libtool) 2.4.6
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='libavrdude.1.dylib'
+
+# Names of this library.
+library_names='libavrdude.1.dylib libavrdude.dylib'
+
+# The name of the static archive.
+old_library='libavrdude.a'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags=' '
+
+# Libraries that this one depends upon.
+dependency_libs=' -L/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib -lreadline -lncurses -ltermcap'
+
+# Names of additional weak libraries provided by this library
+weak_library_names=''
+
+# Version information for libavrdude.
+current=1
+age=0
+revision=0
+
+# Is this an already installed library?
+installed=yes
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=no
+
+# Files to dlopen/dlpreopen
+dlopen=''
+dlpreopen=''
+
+# Directory that this library needs to be installed in:
+libdir='/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib'

compiled/tools/mac/tool-avrdude/libusb-1.0.la

@@ -0,0 +1,41 @@
+# libusb-1.0.la - a libtool library file
+# Generated by libtool (GNU libtool) 2.4.2
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname=''
+
+# Names of this library.
+library_names=''
+
+# The name of the static archive.
+old_library='libusb-1.0.a'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags=' '
+
+# Libraries that this one depends upon.
+dependency_libs=' -lobjc'
+
+# Names of additional weak libraries provided by this library
+weak_library_names=''
+
+# Version information for libusb-1.0.
+current=1
+age=1
+revision=0
+
+# Is this an already installed library?
+installed=yes
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=no
+
+# Files to dlopen/dlpreopen
+dlopen=''
+dlpreopen=''
+
+# Directory that this library needs to be installed in:
+libdir='/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib'

compiled/tools/mac/tool-avrdude/libusb-config

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+prefix=/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir
+exec_prefix=${prefix}
+includedir=${prefix}/include
+libdir=${exec_prefix}/lib
+exec_prefix_set=no
+
+usage()
+{
+	cat <<EOF
+Usage: libusb-config [OPTIONS] [LIBRARIES]
+Options:
+	[--prefix[=DIR]]
+	[--exec-prefix[=DIR]]
+	[--version]
+	[--libs]
+	[--cflags]
+EOF
+	exit $1
+}
+
+if test $# -eq 0; then
+	usage 1 1>&2
+fi
+
+while test $# -gt 0; do
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      if test $exec_prefix_set = no ; then
+        exec_prefix=$optarg
+      fi
+      ;;
+    --prefix)
+      echo_prefix=yes
+      ;;
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      exec_prefix_set=yes
+      ;;
+    --exec-prefix)
+      echo_exec_prefix=yes
+      ;;
+    --version)
+      echo 0.1.12
+      exit 0
+      ;;
+    --cflags)
+      if test "$includedir" != /usr/include ; then
+        includes="-I$includedir"
+      fi
+      echo_cflags=yes
+      ;;
+    --libs)
+      echo_libs=yes
+      ;;
+    *)
+      usage 1 1>&2
+      ;;
+  esac
+  shift
+done
+
+if test "$echo_prefix" = "yes"; then
+	echo $prefix
+fi
+if test "$echo_exec_prefix" = "yes"; then
+	echo $exec_prefix
+fi
+if test "$echo_cflags" = "yes"; then
+	echo $includes
+fi
+if test "$echo_libs" = "yes"; then
+	echo -L$libdir -lusb
+fi

compiled/tools/mac/tool-avrdude/libusb.la

@@ -0,0 +1,41 @@
+# libusb.la - a libtool library file
+# Generated by libtool (GNU libtool) 2.4.2
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname=''
+
+# Names of this library.
+library_names=''
+
+# The name of the static archive.
+old_library='libusb.a'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags=' '
+
+# Libraries that this one depends upon.
+dependency_libs=' -L/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib /Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib/libusb-1.0.la -lobjc'
+
+# Names of additional weak libraries provided by this library
+weak_library_names=''
+
+# Version information for libusb.
+current=8
+age=4
+revision=4
+
+# Is this an already installed library?
+installed=yes
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=no
+
+# Files to dlopen/dlpreopen
+dlopen=''
+dlpreopen=''
+
+# Directory that this library needs to be installed in:
+libdir='/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib'

compiled/tools/mac/tool-avrdude/package.json

@@ -0,0 +1,10 @@
+{
+    "description": "AVRDUDE",
+    "name": "tool-avrdude",
+    "system": [
+        "darwin_x86_64",
+        "darwin_i386"
+    ],
+    "url": "http://www.nongnu.org/avrdude/",
+    "version": "1.60300.190424"
+}

compiled/tools/mac/tool-bossac/package.json

@@ -0,0 +1,7 @@
+{
+    "description": "Basic Open Source SAM-BA Application (BOSSA)",
+    "name": "tool-bossac",
+    "system": "darwin_x86_64",
+    "url": "https://github.com/shumatech/BOSSA",
+    "version": "1.10700.0"
+}

compiled/tools/mac/tool-esptool/package.json

@@ -0,0 +1,10 @@
+{
+    "description": "esptool-ck",
+    "name": "tool-esptool",
+    "system": [
+        "darwin_x86_64",
+        "darwin_i386"
+    ],
+    "url": "https://github.com/igrr/esptool-ck",
+    "version": "1.413.0"
+}

compiled/tools/win/tool-avrdude/install_giveio.bat

@@ -0,0 +1,34 @@
+@set DIRVERNAME=giveio
+@set DIRVERFILE=%DIRVERNAME%.sys
+
+@echo Copying the driver to the windows directory
+@echo target file: %WINDIR%\%DIRVERFILE%
+@copy %DIRVERFILE% %WINDIR%\%DIRVERFILE%
+
+@echo Remove a running service if needed...
+@loaddrv stop %DIRVERNAME% >NUL
+@if errorlevel 2 goto install
+
+@loaddrv remove %DIRVERNAME% >NUL
+@if errorlevel 1 goto install
+
+:install
+@echo Installing Windows NT/2k/XP driver: %DIRVERNAME%
+
+@loaddrv install %DIRVERNAME% %WINDIR%\%DIRVERFILE%
+@if errorlevel 3 goto error
+
+@loaddrv start %DIRVERNAME%
+@if errorlevel 1 goto error
+
+@loaddrv starttype %DIRVERNAME% auto
+@if errorlevel 1 goto error
+
+@echo Success
+@goto exit
+
+:error
+@echo ERROR: Installation of %DIRVERNAME% failed
+
+:exit
+

compiled/tools/win/tool-avrdude/package.json

@@ -0,0 +1,11 @@
+{
+    "name": "tool-avrdude",
+    "description": "AVRDUDE",
+    "system": [
+        "windows",
+        "windows_amd64",
+        "windows_x86"
+    ],
+    "url": "http://www.nongnu.org/avrdude/",
+    "version": "1.60300.190424"
+}

compiled/tools/win/tool-avrdude/remove_giveio.bat

@@ -0,0 +1,14 @@
+@set DIRVERNAME=giveio
+
+@loaddrv stop %DIRVERNAME%
+@if errorlevel 2 goto error
+
+@loaddrv remove %DIRVERNAME%
+@if errorlevel 1 goto error
+
+@goto exit
+
+:error
+@echo ERROR: Deinstallation of %DIRVERNAME% failed
+
+:exit

compiled/tools/win/tool-avrdude/status_giveio.bat

@@ -0,0 +1,12 @@
+@set DIRVERNAME=giveio
+
+@loaddrv status %DIRVERNAME%
+@if errorlevel 1 goto error
+
+@goto exit
+
+:error
+@echo ERROR: Status querry for %DIRVERNAME% failed
+
+:exit
+

compiled/tools/win/tool-bossac/package.json

@@ -0,0 +1,11 @@
+{
+    "description": "Basic Open Source SAM-BA Application (BOSSA)",
+    "name": "tool-bossac",
+    "system": [
+        "windows",
+        "windows_amd64",
+        "windows_x86"
+    ],
+    "url": "https://github.com/shumatech/BOSSA",
+    "version": "1.10700.0"
+}

compiled/tools/win/tool-esptool/package.json

@@ -0,0 +1,11 @@
+{
+    "description": "esptool-ck",
+    "name": "tool-esptool",
+    "system": [
+        "windows",
+        "windows_amd64",
+        "windows_x86"
+    ],
+    "url": "https://github.com/igrr/esptool-ck",
+    "version": "1.413.0"
+}

compiled/tools/win/tool-mkspiffs/package.json

@@ -0,0 +1,11 @@
+{
+    "description": "Tool to build and unpack SPIFFS images",
+    "name": "tool-mkspiffs",
+    "system": [
+        "windows",
+        "windows_amd64",
+        "windows_x86"
+    ],
+    "url": "https://github.com/igrr/mkspiffs",
+    "version": "2.230.0"
+}

compiled/update_bin.sh

@@ -0,0 +1,12 @@
+cp ../.pio/build/controllino/firmware.hex controllino
+cp ../.pio/build/m5stack/firmware.bin m5stack
+cp ../.pio/build/mega2560slim-5100/firmware.hex mega2560slim-5100
+cp ../.pio/build/due-5100/firmware.bin due-5100
+cp ../.pio/build/mega2560-5100/firmware.hex mega2560-5100
+cp ../.pio/build/due-5500/firmware.bin due-5500
+cp ../.pio/build/nrf52840-5500/firmware.hex nrf52840-5500
+cp ../.pio/build/esp32-wifi/firmware.bin esp32-wifi
+cp ../.pio/build/stm32-enc2860/firmware.bin stm32-enc2860
+cp ../.pio/build/esp8266-wifi/firmware.bin esp8266-wifi
+cp ../.pio/build/lighthub21/firmware.bin lighthub21
+cp ../.pio/build/mega2560-5500/firmware.hex mega2560-5500

config-examples/c4-3e-11-03-1b-1e.config.json

@@ -0,0 +1,30 @@
+{
+  "mqtt":["garden","192.168.10.114",1883,"test","test"],
+  "ow":{
+    "28FFADCE601705A3":{"emit":"t_soil1","item":"h_relay6"},
+    "286164123FF96F55":{"emit":"t_soil2"},
+    "28FFEF6D60170335":{"emit":"t_soil3"}
+  },
+  "items":{
+    "h_relay1":[6,39,1,1],
+    "h_relay2":[6,38,1,1],
+    "h_relay3":[6,37,1,1],
+    "h_relay4":[6,36,1,1],
+    "h_relay5":[6,35,1,1],
+    "h_relay6":[5,34,27,1],
+    "h_relay7":[6,33,1,1],
+    "h_relay8":[6,32,1,1],
+    "h_auto":[6,29,1,1]
+  },
+  "in":{
+    "5": {"T":4,"emit": "/myhome/s_out/t_dht1"},
+    "40":{"emit":"/myhome/s_out/g_in1","scmd":"CLOSED","rcmd":"OPEN"},
+    "41":{"emit":"/myhome/s_out/g_in2","scmd":"CLOSED","rcmd":"OPEN"},
+    "42":{"emit":"/myhome/s_out/g_in3","scmd":"CLOSED","rcmd":"OPEN"},
+    "43":{"emit":"/myhome/s_out/g_in4","scmd":"CLOSED","rcmd":"OPEN"},
+    "44":{"emit":"/myhome/s_out/g_in5","scmd":"CLOSED","rcmd":"OPEN"},
+    "45":{"emit":"/myhome/s_out/g_in6","scmd":"CLOSED","rcmd":"OPEN"},
+    "46":{"emit":"/myhome/s_out/g_in7","scmd":"CLOSED","rcmd":"OPEN"},
+    "47":{"emit":"/myhome/s_out/g_in8","scmd":"CLOSED","rcmd":"OPEN"}
+  }
+}

config-examples/c4-3e-1f-03-1b-1b.config.json

@@ -0,0 +1,9 @@
+{
+  "mqtt": ["test_esp","192.168.10.1",1883,"test","test"],
+  "items":{
+    "h_speed0": [6,9],
+    "h_speed1": [6,10]},
+  "in": {
+    "5": {"T":4,"emit": "/myhome/s_out/t_vent_street"}
+  }
+}

get_build_flags.py

@@ -0,0 +1,31 @@
+# -*- coding: utf-8 -*-
+from __future__ import print_function
+import os
+import sys
+print(sys.argv[1:], file=sys.stderr)
+#print("build_flags_"+sys.argv[1:][0])
+try:
+    file = open("build-flags/build_flags_"+sys.argv[1:][0])
+except IOError as e:
+    print(u'No build flags file ', file=sys.stderr)
+else:
+    with file:
+           for line in file.readlines():
+               if not line.startswith('#'):
+                    print (line)
+           file.close()
+
+try:
+    file = open("custom-build-flags/build_flags_"+sys.argv[1:][0])
+except IOError as e:
+    print(u'No custom build flags file ', file=sys.stderr)
+else:
+    with file:
+           for line in file.readlines():
+               if not line.startswith('#'):
+                    print (line)
+           file.close()
+
+sys.stdout.write("-DPIO_SRC_REV=")
+sys.stdout.flush()
+os.system("git log --pretty=format:%h_%ad -1 --date=short")

lighthub/abstractch.cpp

@@ -0,0 +1,42 @@
+
+#include "abstractch.h"
+#include <PubSubClient.h>
+#include "utils.h"
+#include <aJSON.h>
+#include "main.h"
+
+extern lan_status lanStatus;
+extern PubSubClient mqttClient;
+extern int8_t ethernetIdleCount;
+
+int abstractCh::publishTopic(const char* topic, long value, const char* subtopic)
+{
+  char valstr[16];
+  printUlongValueToStr(valstr, value);
+  return publishTopic(topic, valstr,subtopic);
+};
+
+int abstractCh::publishTopic(const char* topic, float value, const char* subtopic)
+{
+  char valstr[16];
+  printFloatValueToStr(value, valstr);
+  return publishTopic(topic, valstr,subtopic);
+};
+
+int abstractCh::publishTopic(const char* topic, const char * value, const char* subtopic)
+{
+  char addrstr[MQTT_TOPIC_LENGTH];
+
+    if (topic)
+     {
+       strncpy(addrstr,topic,sizeof(addrstr));
+       if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,topic);
+       strncat(addrstr,subtopic,sizeof(addrstr));
+       if (mqttClient.connected() && lanStatus == OPERATION  && !ethernetIdleCount)
+                       {
+                        mqttClient.publish(addrstr, value, true);
+                        return 1;
+                      }
+     }
+return 0;
+};

lighthub/abstractch.h

@@ -0,0 +1,23 @@
+#pragma once
+#include "Arduino.h"
+
+#define CST_UNKNOWN  0
+#define CST_INITIALIZED  1
+
+class abstractCh {
+public:
+    abstractCh(){};
+    virtual ~abstractCh(){};
+    virtual int Poll(short cause) = 0;
+    virtual int Setup() =0;        //Should initialize hardware and reserve resources
+    virtual int Anounce () {return 0;};
+    virtual int Stop() {return 0;};         //Should free resources
+    virtual int Status() {return CST_UNKNOWN;}
+
+
+protected:
+virtual int publishTopic(const char* topic, long value, const char* subtopic = NULL);
+virtual int publishTopic(const char* topic, float value, const char* subtopic = NULL );
+virtual int publishTopic(const char* topic, const char * value, const char* subtopic = NULL);
+//friend Input;
+};

lighthub/abstractin.cpp

@@ -0,0 +1,38 @@
+
+#include "abstractin.h"
+#include "abstractch.h"
+#include <PubSubClient.h>
+#include "utils.h"
+#include <aJSON.h>
+#include "inputs.h"
+#include "main.h"
+
+extern lan_status lanStatus;
+extern PubSubClient mqttClient;
+
+int abstractIn::publish(long value, const char* subtopic)
+{
+  char valstr[16];
+  printUlongValueToStr(valstr, value);
+  return publish(valstr,subtopic);
+};
+
+int abstractIn::publish(float value, const  char* subtopic)
+{
+  char valstr[16];
+  printFloatValueToStr(value, valstr);
+  return publish(valstr,subtopic);
+};
+
+int abstractIn::publish(char * value, const char* subtopic)
+{
+  if (in)
+  {
+  aJsonObject *emit = aJson.getObjectItem(in->inputObj, "emit");
+    if (emit && emit->type == aJson_String)
+     {
+       return publishTopic(emit->valuestring,value,subtopic);
+     }
+  }
+return 0;
+};